Senior Quality Inspector Job at Hunter Selection

Senior Site Services Inspector

Are you looking for a role where your technical Joinery expertise makes a real i...

Location

United Kingdom , Sheffield

Salary:

Not provided

JELD-WEN UK

Expiration Date

Until further notice

Requirements

City & Guilds/NVQ/Diploma or equivalent in Joinery achieved through an apprenticeship
Previous Experience of working with Fire doors
Valid CSCS card or willingness to obtain prior to employment
Working knowledge of building and health & safety regulations
Leadership experience in leading cross-functional teams and mentoring direct reports
Full, clean UK driving licence
Flexible regarding working hours with early starts, late finishes, and overnight stays required

Job Responsibility

Conduct site visits to assess reported issues and provide technical support
Prepare detailed reports with recommendations for remedial actions, including materials, personnel, and safety considerations
Act as the voice of the customer in quality-related decisions
Translate customer feedback, complaints, and expectations into actionable quality improvements
Collaborate with the UK Quality and R&D teams to support continuous improvement and product development
Carry out surveys, inspections, and oversee installation and maintenance activities under BM TRADA certification
Complete annual audits and implement ongoing training requirements under BM TRADA schemes
Always operate with a safety-first mentality
Direct line manager for four direct reports, setting their objectives and managing their outputs as well as nurturing their development
Communicate effectively with customers regarding issues, solutions, and claim outcomes

What we offer

25 days holiday and 8 statutory bank holidays, with the opportunity to purchase up to 5 days
7.5% pension
private health insurance
company car/van
opportunities to grow and develop your career

Fulltime

Senior Subsea Pipeline Marine Inspector

Airswift are a Global Manpower Provider specializing in the Energy, Infrastructu...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering discipline (Mechanical) with demonstrated knowledge and experience
CSWIP 3.4UC Underwater Inspection Controller (Ref. CSWIP Document No.CSWIP-DIV-7-95 – Part 2)
Current / valid BOSIET, TBOSIET, FOET or TFOET certificate (Ref. OPITO requirements), as applicable, in conjunction with an offshore medical certificate
Experience in conducting QMS audits and QA verification programs for various project phases (i.e., Engineering, Procurement, Construction and Installation (specifically, the Repair / Installation of pipelines and their associated infrastructure) would be preferable
At least six (6) years of working experience in Quality Assurance and Control (QA/QC) within the Oil and Gas industry (i.e., onshore and offshore)
Should have a proven history as a lead 3.4UC underwater inspection controller within demanding subsea/offshore projects
Subsea pipeline project experience is highly desired, with emphasis on pipeline operations, integrity assurance/non-destructive testing (NDT) and inspection, maintenance and/or design and construction
Familiarity with marine vessel operations and the organisational responsibility of the (i) Offshore Construction/Installation Manger, (ii) Vessel Master, (iii) Diving and ROV Supervisors, (iv) Client Representative(s), (v) Certifying Authorities, etc.
Knowledge and working experience of underwater inspection (UWI) in the form of visual inspection and non-destructive testing (NDT) conducted by means of the intervention of diver(s) and/or remotely operated vehicle (ROV) or crewed submersible (i.e., either as a practitioner and/or as the result of training or certification conforming to the requirements of CSWIP Document No. CSWIP-DIV-7-95 – Part 1 and 2)
With respect to UWI and other related activities, shall be familiar with (i) relevant subsea applied inspection systems, (ii) recording and processing of data, (iii) quality assurance (QA), (iv) inspection planning and briefing, (v) the capabilities and limitations of divers/ROV’s and submersibles, and (vi) the care and deployment of equipment

Job Responsibility

Ensure compliance with QatarEnergy LNG systems and processes, including the Project Management System. Engage contractors and applicable third-party organisations with a professional approach and maintain a good working level relationship
Have a knowledge of the front end engineering design (FEED) deliverables and engineering study reports to support the implementation of the Project Quality Plan (PQP) and associated Procedures
Review the project Scope of work, to determine the nature, extent, and frequency of quality verification activities
Monitor, evaluate and report the inspection and testing status of the pipeline repair activities
Maintain interface relationships with Subsea Pipeline Repair Installation, and Inspection Contractors (including nominated specialist third-party Contractor organisation(s)), and the applicable regulatory focal points
especially, those functioning offshore
Review Contractor’s and Vendor’s quality reports / deliverables, in line with the project quality requirements
In conjunction with the QA/QC delegation operating offshore, verify that the repair activities are in accordance with approved documented information (i.e. procedures, specifications, detailed methodologies, etc)
Support the underwater inspection (UWI) activities during the offshore / subsea repairs, by means of the development of job records, preparation of daily reports, review of diver commentary and transfer into the written form, interpretate ROV camera footage and transfer into the written form and be able to produce an oral commentary of the daily activities, as and when required
Monitor the technical inspections, verification, certification and acceptance by Specialist Third Party Inspection (TPI) Contractor, as applicable, and develop the final documentation for each offshore campaign (i.e., PL-49, PL-75, PL-610 and PL-811)

Fulltime

Quality Inspector - Senior

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

February 06, 2026

Requirements

5 years experience as a Quality Inspector in an aerospace, military or equivalent high reliability field
Experience with measuring instruments (scales, micrometers, calipers, digital multimeters, etc.)
Advanced knowledge of AS9100 quality standards
Advanced knowledge of product manufacturing, assembly, test and inspection processes
Working knowledge of process auditing techniques to ensure compliance to defined quality requirements
Experience in performing inspections of aerospace components, ensuring compliance with engineering specifications, quality standards, and industry regulations
Participated in TRS (test readiness scrum) component environmental test meetings
Ability to interpret mechanical drawings, schematics, harness wiring diagrams, internal and external specifications
Ability to lift up to 25 lbs
Excellent communication and interpersonal skills with the ability to articulate aerospace hardware and systems problems to technical professionals to initiate resolutions

Job Responsibility

Initiating corrective actions with our Manufacturing, ATLO, and Engineering teams
Maintain systems that will assure the quality and traceability of the incoming materials and final products
Interfaces and/or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issues involving design, methods, tooling, cost and other areas involved in the control of product quality
Monitor all manufacturing processes through audits and daily evaluations, to ensure that assembly & test operations being performed in accordance with approved specifications and standards
Documenting discrepancies as they occur during manufacturing & test operations
Independently perform verifications and document results in a clear, precise, and complete manner
Travel required to support operations identified by program being supported
Support in other inspection areas defined by Millennium Space Systems Leadership as business needs require
Develop, implement, and audit inspection and test plans, acceptance criteria, and in-process work instructions
Facilitate root cause analysis and resolution with manufacturing / production area DR’s

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations

Fulltime

Quality Inspector - Senior

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , El Segundo

Salary:

29.42 - 47.09 USD / Hour

Boeing

Expiration Date

February 09, 2026

Requirements

5 years experience as a Quality Inspector in an aerospace, military or equivalent high reliability field
Experience with measuring instruments (scales, micrometers, calipers, digital multimeters, etc.)
Advanced knowledge of AS9100 quality standards
Advanced knowledge of product manufacturing, assembly, test and inspection processes
Working knowledge of process auditing techniques to ensure compliance to defined quality requirements
Experience in performing inspections of aerospace components, ensuring compliance with engineering specifications, quality standards, and industry regulations
Participated in TRS (test readiness scrum) component environmental test meetings
Ability to interpret mechanical drawings, schematics, harness wiring diagrams, internal and external specifications
Ability to lift up to 25 lbs
Excellent communication and interpersonal skills with the ability to articulate aerospace hardware and systems problems to technical professionals to initiate resolutions

Job Responsibility

Initiating corrective actions with our Manufacturing, ATLO, and Engineering teams
Maintain systems that will assure the quality and traceability of the incoming materials and final products
Interfaces and/or works closely with Design and Manufacturing Engineering, Manufacturing, Materials, Procurement and Shipping personnel on procedural issues involving design, methods, tooling, cost and other areas involved in the control of product quality
Monitor all manufacturing processes through audits and daily evaluations, to ensure that assembly & test operations being performed in accordance with approved specifications and standards
Documenting discrepancies as they occur during manufacturing & test operations
Independently perform verifications and document results in a clear, precise, and complete manner
Travel required to support operations identified by program being supported
Support in other inspection areas defined by Millennium Space Systems Leadership as business needs require
Develop, implement, and audit inspection and test plans, acceptance criteria, and in-process work instructions
Facilitate root cause analysis and resolution with manufacturing / production area DR’s

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Programs that provide for both paid and unpaid time away from work

Fulltime

Qa/qc Coordinator

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

BSc degree or higher in Mechanical or Metallurgical Engineering from a recognized Engineering faculty
Valid CSWIP 3.2.1 or AWS Senior Welding Inspection Certificate (SCWI) with at least five years of post-certification experience
B Gas Grade 2 or NACE Level II Coating Inspector qualification is preferable
NDT Level II in RT, UT, PT & MT / NDT qualifications per ASNT or ISO requirements
Certified QMS Lead Auditor in accordance with ISO 9001:2015 with at least five years of auditing experience
Strong knowledge of international codes/standards: EN, ISO, API, ASME, ASTM
Good leadership and communication skills
Ability to work on projects in a complex, multicultural environment
Proficient in MS Office, database management, spreadsheets, and email communication
Minimum 15 years as QA/QC Coordinator or QA/QC Lead, leading multidiscipline QC inspector teams for inspection and testing activities on major oil and gas projects, including offshore process platforms, jackets, subsea pipelines, and all phases of manufacturing, fabrication, construction, and offshore installation

Job Responsibility

Report quality status daily to the Senior Quality Engineer
Supervise and coordinate all activities related to the Quality Management System during construction and installation phases
Ensure all works by contractors, subcontractors, vendors, manufacturers, service providers, and third-party inspectors comply with project specifications, corporate standards, international codes, and QA/QC requirements
Review technical and quality documents, ITPs, and QA/QC procedures in the document management system
Ensure approved QA/QC documents are implemented at worksite level, including quality plans, control procedures, ITPs, and inspection checklists
Lead and coordinate QC inspectors’ activities at fabrication sites, construction sites, and offshore installations
review inspection reports
Monitor contractor/vendor implementation of approved quality requirements and address deficiencies
Act as focal point for resolving shop/site-related quality control issues in consultation with senior quality management
Control and follow up on technical deviations, material substitutions, and changes to inspection/test requirements

Deputy Manager Project Quality

The Project Quality-Dy Manager is a critical leadership role responsible for ens...

Location

India , Pune

Salary:

Not provided

Randstad

Expiration Date

February 08, 2026

Requirements

Bachelor's degree in Engineering (Mechanical, Industrial, or related field) required
Master's degree preferred
Minimum 6-8 years of progressive experience in plant quality management within the automotive industry
Extensive knowledge of IATF 16949, ISO 9001, and other relevant quality standards
Proven experience in leading and managing quality teams
Strong understanding of automotive manufacturing processes and quality tools (PPAP, APQP, FMEA, MSA, SPC)
Excellent problem-solving, analytical, and communication skills
Strong leadership and interpersonal skills
Experience with digital quality management systems is highly desirable
Six Sigma Black Belt certification is preferred

Job Responsibility

Lead and mentor a team of quality engineers, inspectors, and technicians
Develop and implement quality strategies and objectives aligned with company goals
Foster a culture of quality awareness and continuous improvement throughout the plant
Manage the plant's quality budget and resources effectively
Maintain and improve the plant's Quality Management System (QMS) in accordance with IATF 16949, ISO 9001, and other relevant standards
Ensure compliance with all customer-specific requirements and regulatory standards
Oversee internal and external quality audits, including preparation and follow-up activities
Manage PPAP, APQP, FMEA, MSA, and SPC processes
Drive continuous improvement initiatives to reduce defects, improve efficiency, and enhance customer satisfaction
Lead root cause analysis and problem-solving efforts for quality issues

Fulltime

Construction Inspector I

Construction Inspectors spend the majority of their time working on projects per...

Location

United States , Abilene

Salary:

Not provided

Terracon Consultants, Inc

Expiration Date

Until further notice

Requirements

High school diploma or equivalent
Associates degree in Civil Engineering Technology or Construction Engineering Technology preferred
Minimum 2-4 years’ experience as an Engineering Technician or other applicable experience
1 year experience in construction inspection preferred
Valid driver’s license with acceptable violation history
Successful completion of related internal safety certifications
At least one or more certifications in the following areas: NICET Level II certification in Construction Materials Testing (Asphalt, Concrete, Soils)
NICET Level II certification in Geotechnical (Construction, Laboratory, Exploration, Generalist)
ICC certification (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel – Bolting, Structural Steel – Welding)
American Welding Society (AWS) Certified Welding Inspector (CWI)

Job Responsibility

Perform daily inspection of construction projects monitoring quality and adherence to building code requirements, construction drawings and project specifications
Inspections may cross multiple inspection disciplines or within a specified area of expertise including structural steel, concrete, masonry, fireproofing, etc
Inspection may include visual/physical inspection and field testing to verify conformance with the plans and specifications
Prepare inspection reports and provide written documentation of observations and testing of materials
Communicate findings to engineer or project manager and when requested collaborate with the project team on solutions to potential issues
Adhere to strict safety standards
Performs testing, observation, and inspection as directed in accordance with training and the specified procedures
Read and interpret construction drawings and specifications
Provides clear documentation of findings and results
Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager

What we offer

Medical
dental
vision
life insurance
401(k) plan
paid time off and holidays
education reimbursement
various bonus programs

Fulltime

Senior Quality Inspector (PCBA)

SQA Services is seeking a highly experienced Level III PCBA Inspector to support...

Location

United States , Colorado Springs; Denver

Salary:

36.00 - 42.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

10+ years electronic inspection experience
Current J-STD-001 with Space Addendum certification
Strong GD&T interpretation skills
Proficiency with precision dimensional inspection tools
Excellent communication and documentation ability

Job Responsibility

Perform comprehensive in-process and final source inspections per drawings and specifications
Conduct visual, mechanical, and dimensional inspections using calibrated tools
Apply J-STD-001 Space Addendum requirements to evaluate workmanship
Interpret complex GD&T requirements accurately
Utilize Buyer inspection guides to ensure thorough deficiency detection
Release only conforming product
escalate nonconformances
Conduct witness inspections of critical features
Audit supplier execution to approved inspection plans
Validate justifications for parts not inspected at final inspection

Parttime

Senior Quality Inspector

Hunter Selection | B Corp™

Location:
United Kingdom , Thame

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 26, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Senior Quality Inspector

Senior Site Services Inspector

Senior Subsea Pipeline Marine Inspector

Quality Inspector - Senior

Quality Inspector - Senior

Qa/qc Coordinator

Deputy Manager Project Quality

Construction Inspector I

Senior Quality Inspector (PCBA)

Senior Quality Inspector

Hunter Selection | B Corp™

Location:United Kingdom , Thame

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 26, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Senior Quality Inspector

Senior Site Services Inspector

Senior Subsea Pipeline Marine Inspector

Quality Inspector - Senior

Quality Inspector - Senior

Qa/qc Coordinator

Deputy Manager Project Quality

Construction Inspector I

Senior Quality Inspector (PCBA)

Location:
United Kingdom , Thame

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
January 26, 2026