Senior QAQC Engineer Job at Bureau Veritas Certification CZ, s.r.o.

Senior QAQC Inspector - Advance NDT

To interpret the suitability of products and processes against the designated sp...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor of Engineering - Mechanical / Metallurgy or Equivalent
NDT certificate in ASNT/PCN Level III for methods in UT, RT, PAUT and TOFD, as minimum
NDT certificate in ASNT/PCN Level II for methods MT and PT, as minimum
CSWIP 3.1 certification and NDT Certificate in ECT, preferred
Minimum 10 years of working experience as NDE personnel for Oil & Gas projects, preferably in LNG (greenfield, brownfield, shutdowns, and live plant environments)
Demonstrated minimum 4-6 years of hands-on experience in advance NDT (PAUT/TOFD) post certification and NDT data interpretation, procedure review, scan plan assessment, and technical validation of contractor inspection outputs
Practical experience in interpretation and acceptance evaluation of weld inspection results against ASME Section V, ASME B31.3, ASME VIII, API 1104, API 5L, project specifications, and approved inspection procedures
Demonstrated understanding of welding processes, weld joint configurations, weld repair scenarios, heat affected zone considerations, common fabrication and service-induced discontinuities, and the impact of welding variables on NDT technique selection and interpretation
Demonstrated ability to assess inspection limitations arising from geometry, restricted access, material condition, and weld profile, coating, cladding, or in-service constraints, and recommend technically suitable inspection approaches
Extensive experience with reviewing/interpretation of PAUT/TOFD, RT Film and witnessing of MT and PT methods

Job Responsibility

Engage with external Contractors to perform PAUT/TOFD and advance NDT techniques and perform defect sizing, characterization
Review and technically assess contractor-issued NDT reports, interpretation records, images, and supporting inspection data to confirm adequacy, traceability, and compliance prior to acceptance
Review and verify NDT procedures, technique sheets, personnel certifications, calibration records, equipment validity, and qualification records prior to commencement of inspection activities
Ensure full traceability between weld maps, line/component identification, NDT reports, repair history, final inspection status, and supporting quality records
Interpret advance NDT data and evaluate indications against the applicable acceptance criteria (ASME, API, Project specs.) and prepare and accurate inspection reports with supporting data/images
Engaging contractors and applicable third-party organizations with a professional approach and maintain a good working level relationship
Review contractors documented quality deliverables in accordance with the requirements and expectations of COMPANY and provide clear, concise output to the applicable quality focal point
Evaluate the suitability of products and processes at key stages against the prescribed specification requirements and is effectively implemented
Ensure NDE traceability of inspected welds and components
Continuously monitor the quality of works in progress at site and at the EPC Contractor fabrication workshop against the applicable NDT Procedure and COMPANY technical specification

Fulltime

New

Senior Mine Engineer

Eldorado Gold Saskatchewan | Foran (TSX:ELD) is seeking a Senior Mine Engineer t...

Location

Canada , Hanson Lake

Salary:

Not provided

Foran Mining Corporation

Expiration Date

July 10, 2026

Requirements

Registered as a P.Eng in Saskatchewan or eligible for registration with APEGS
Minimum tertiary qualification in Mine Engineering (B.Eng. Mining) or equivalent
7+ years of underground hard rock mining experience
Strong understanding of business and operational requirements
Proficiency with the Deswik mining suite including Sched, DB, CAD, and IS
Proficient with Microsoft 365 applications
Strong problem-solving and decision-making skills
Strong communication and interpersonal skills with the ability to collaborate across teams
Ability to work in a dynamic mining environment and adapt to changing conditions
Strong understanding of safety regulations and promoting a safety-first culture

Job Responsibility

Lead by example in promoting a strong safety culture and ensuring compliance with safety regulations
Supervise, train, and mentor engineers and mine technicians
Review and approve mine engineering plans, schedules, ventilation, and dewatering plans
Drive annual budget, production forecast, and life-of-mine (LOM) planning activities
Collaborate with Geology and Metallurgy to optimize production scheduling and blending requirements
Support the conversion of mineral resources into mining reserves
Assess and implement new technologies to improve underground safety and productivity
Promote engineering best practices in mine design and underground infrastructure
Review work practices to identify and reduce operational and personnel risks
Provide QAQC and technical support for blasting, drilling, and mining activities

What we offer

Annual discretionary short term incentive award at a percentage of base salary, rewarding exceptional contributions to team and company success
Employer paid health, dental, and vision insurance
Life and disability insurance
RRSP with company match
Camp-based position with travel support

Fulltime

!

Senior Project Manager- Construction QAQC Manager (Owner's Rep)

As a SPM – Construction QAQC Manager (Owner's Rep), you will serve as the owner'...

Location

United States , Atlanta

Salary:

Not provided

JLL

Expiration Date

Until further notice

Requirements

Bachelor's degree in a related field (Engineering, Architecture, Construction Management, etc.)
Minimum of 7 years of experience in construction quality management or owner's representation, preferably in Mission Critical/Hyperscale Data Center markets
Proven track record of managing quality programs on large, complex projects from design through commissioning
Strong technical knowledge of MEP systems, construction processes, and building codes
Deep understanding of commissioning levels (level 1 through 5) and how it affects the overall project schedule
Strong analytical and problem-solving abilities with attention to detail
Experience with quality management systems, inspection protocols, and testing procedures
Minimum of OSHA 30 Safety Training

Job Responsibility

Deliver exceptional QAQC oversight as the owner's primary representative for all quality assurance and commissioning activities
Manage and oversee all aspects of projects, including planning, quality, commissioning, scheduling, and execution
Collaborate with internal teams and external stakeholders to ensure project success
Develop and implement project-specific quality management plans and inspection protocols
Maintain transparent communication through comprehensive quality reporting and dashboards
Champion the owner's interests while maintaining collaborative relationships with all project stakeholders
Ensure project team is proactive and looks ahead beyond daily tasks
Ensure compliance with contract documents, specifications, building codes, and industry standards
Facilitate coordination between Owner/Architect/Engineers/Contractors to align on project goals and quality expectations
Ensure commissioning requirements are properly sequenced and resourced throughout project phases

What we offer

401(k) plan with matching company contributions
Comprehensive Medical, Dental & Vision Care
Paid parental leave at 100% of salary
Paid Time Off and Company Holidays
Early access to earned wages through Daily Pay

Fulltime

Superintendent Geology

Location

Australia , Pilbara

Salary:

Not provided

Mineral Resources

Expiration Date

Until further notice

Requirements

Tertiary qualifications in Geology or a related technical field
Demonstrated experience managing a grade control and reconciliation program, preferably in hard-rock deposits
Strong understanding of geostatistical methods, resource and grade control modelling principles, and reconciliation processes
Comprehensive demonstrated skills in the use of geological 3D modelling software (Surpac, Leapfrog Geo, Vulcan, or similar)
Experience with geological database management systems (acQuire,)
Practical understanding of QAQC protocols and their application to sampling and assay programs
Strong understanding of mine planning processes and the ability to integrate geological knowledge into operational and planning workflows
Experience participating in Hazard Identification / Risk Assessment processes
Demonstrated experience liaising with drilling and laboratory contractors to achieve program objectives
Effective budget planning and financial management skills

Job Responsibility

Own the end-to-end RCGC program across all active pits, including grade control drilling design, sampling, QAQC, and short-term geological modelling
Lead the Model-Mine-Mill reconciliation process analysing variances, identifying trends, and communicating improvement actions to stakeholders
Oversee all geological mapping, pit face documentation, logging, and data capture across active mining areas, ensuring rigorous data management standards are maintained
Provide geological input into blast design, dig sequencing, bench design, ore feed forecasting, and blending strategies in collaboration with Mining Engineering and Processing teams
Collaborate with corporate Resource Geology to feed operational insights back into Resource models, supporting ongoing model refinement and Ore Reserve updates
Manage the geology department budget, drilling program scheduling, and contractor relationships to ensure cost-effective delivery of geological services
Build, mentor, and develop a team of senior geologists, mine geologists, grade control geologists, and geological technicians
Champion a safety-first culture

What we offer

Employee benefits give you access to deals, discounts, and support that help you unlock the important things in life – Health, Family, Recreation and Your Future with MinRes

Fulltime

Senior Mine Planner

Senior Mine Planner – 2026-023. Foran Mining Corporation (TSX:FOM) is a forward-...

Location

Canada , Hanson Lake

Salary:

100000.00 - 120000.00 CAD / Year

Foran Mining Corporation

Expiration Date

Until further notice

Requirements

Bachelor's degree or diploma in mining engineering or related field
5+ years of underground hard rock mining experience
supervisory experience is an asset
Experience with Deswik mining suite is an asset
Understanding of underground mining practices, including drill & blast and backfilling
Effective communication and teamwork skills
Ability to adapt to a dynamic mining environment
Commitment to safety and regulatory compliance

Job Responsibility

Develop and maintain 3–12-month mining schedules to meet budget targets safely
Support the Mine Engineering Team with daily and weekly tasks
Create short-term plans for drill & blast, backfill, ventilation, and ground control
Prepare drill & blast and development designs to align with schedules
Coordinate short-term schedules (7+21) with operations and technical services
Develop and align weekly mine plans with the three-month plan
Ensure backfill, drilling, and blasting activities follow best practices and safety standards
Supervise, train, and mentor engineers and mine technicians
Conduct trade-off studies and implement operational improvements
Promote safe production through engineering best practices

What we offer

Employer paid health, dental, and vision insurance
Life and disability insurance
RSP with company match
Camp-based position with travel support
Annual discretionary short term incentive award

Fulltime

Quality Manager

Location

Brunei

Salary:

Not provided

Bureau Veritas Certification CZ, s.r.o.

Expiration Date

Until further notice

Requirements

Degree or Diploma in Mechanical, Materials, Quality, or related engineering discipline
ISO 9001 Lead Auditor certification (mandatory)
Minimum 7–10 years experience in QA/QC, inspection, or quality management within the Oil & Gas or critical asset industries
Strong understanding of: ISO 9001 Quality Management Systems, ISO 17020 (Inspection Bodies), ISO 17025 calibration requirements, API/ASME inspection codes and COMPANY quality standards
Familiar with NDT/Advanced NDT competency standards (ISO 9712, SNT-TC-1A, CSWIP, API 570/510/653)
Experience with Vendor Inspection, fabrication surveillance, and document review
Strong analytical, audit, and problem-solving capabilities (NCR, RCA, CAR processes)
Proficient in MS Office, digital inspection systems, and quality management tools
Effective communication and stakeholder management skills to interface with COMPANY representatives
HSSE awareness and required COMPANY training (BOSIET if offshore visits are required)

Job Responsibility

Provide overall leadership and governance of the Contractor Quality Management System (QMS) to ensure full compliance with COMPANY requirements, ISO 9001, and ISO 17020
Oversee all quality functions including: Quality Assurance Engineer, Tools, Materials & Calibration Coordinator, Vendor Third-Party Inspection (VTPI) Coordinator, Quality Engineering Team (Quality Lead, Senior QAQC Engineer, Project QE, QCS Engineer)
Ensure all inspection deliverables, reports, data submissions, workpacks, and documentation meet COMPANY quality standards, procedures, and contractual obligations
Lead the preparation, submission, implementation, and maintenance of the Quality Assurance Plan (QAP), ITPs, Surveillance Plan, and contract-specific quality documentation
Manage and execute internal quality audits, support COMPANY audits, and ensure timely closure of NCRs, CARs, and preventive actions
Ensure calibration compliance of all NDT/Advanced NDT equipment, gauges, EX-rated devices, and inspection tools in accordance with ISO 17025 requirements
Provide quality oversight for Vendor Inspection / TPI activities, including review of Vendor Quality Plans, ITPs, FAT/SAT procedures, and manufacturing surveillance reports
Review and validate inspection data quality, ensuring accuracy, completeness, traceability, and compliance before CIRRAS/SAP submission
Lead quality risk assessments, identify quality gaps, and implement improvements to enhance reliability of inspection execution
Ensure personnel competency and qualification records for inspection/NDT staff are maintained in accordance with contract requirements (ISO 9712, API, CSWIP, ASNT, IRATA)

Project Manager

A key role in a growing team that will lead all activities in the construction o...

Location

Ireland , Athlone

Salary:

Not provided

Turner Lovell

Expiration Date

Until further notice

Requirements

3rd level qualified in Electrical Engineering, Building Services Engineering or strong trades background
Experience in Substations, High Voltage, Medium Voltage type projects is essential
Professional manner and able to represent the company at a senior level in meetings, presentations, technical workshops, etc. in a professional, competent and capable manner
Strong IT skills – Ability to deliver presentations, reports etc.
Experience at managing a multiple disciplined Project Team

Job Responsibility

Arrange and chair handover of project from estimating department to construction team during project start-up
Validate project and in doing so develop business plan, cost control system, cashflow and billable schedules, etc.
Continuous review of on site management competencies and develop a training plan for staff and operatives who require development
Continuous auditing and reporting of EHS procedures
and auditing and reporting of QAQC procedures
Ensure compliance with programme, materials deliveries and engineering
Hold progress meetings with sub-contractors and ensure that safety and training are discussed
Ensure testing and commissioning is carried out in accordance with the Quality Plan
Complete and certify all ‘life systems’ in good time for handover date

Fulltime

Business Analyst Ii

Location

United States , Nashville

Salary:

Not provided

Robert Half

Expiration Date

Until further notice

Requirements

Bachelor's degree in a related field or equivalent practical experience
4–6 years of experience in business analysis or a closely related role
Strong knowledge of business systems, process analysis, and requirements documentation
Proficiency with Microsoft Excel, SQL, and data interpretation techniques
Experience creating dashboards and reports using Tableau or similar visualization tools
Familiarity with relational databases and client-server environments
Excellent analytical, planning, communication, and problem-solving skills
Ability to work independently on complex assignments while exercising sound judgment and creativity

Job Responsibility

Analyze current business workflows, systems, and user expectations to identify improvement opportunities and define practical solution approaches
Gather, interpret, and document functional needs, business rules, and process steps required for new applications or enhancements to existing programs
Partner with stakeholders, technical teams, and project leadership to ensure proposed solutions support strategic business goals
Use SQL, Excel, and related tools to examine data, validate findings, and support informed decision-making
Develop reports and dashboards in Tableau or similar platforms to present trends, performance metrics, and operational insights
Translate complex information into clear documentation that supports development, testing, and implementation activities
Contribute to project planning efforts by helping prioritize requirements, clarify scope, and track key deliverables
Provide guidance on business analysis activities and may assist in coordinating work across team members when needed

What we offer

medical, vision, dental, and life and disability insurance
401(k) plan

Select Country

Senior QAQC Engineer

Job Responsibility

Requirements

Looking for more opportunities?