CrawlJobs Logo
EnerComp Solutions Pvt Ltd Logo EnerComp Solutions Pvt Ltd · IT - Software Development

Senior Power Electronics Engineer

India, Ahmedabad · Job Posted February 19, 2026
Apply Position
Job Link Share

Job Description

We are seeking a Senior Power Electronics Engineer with strong hands-on experience in Electronic Speed Controller (ESC) design for BLDC/PMSM motors. This role focuses on end-to-end ESC hardware design, along with development of other power electronics subsystems used in advanced applications such as UAVs, robotics, and electric propulsion systems. The ideal candidate should be capable of independently designing, prototyping, testing, and refining high-current, high-reliability ESCs, and working closely with firmware teams. Experience with AM32 firmware is strongly preferred.

Job Responsibility

  • Design and develop BLDC/PMSM ESC hardware from concept to production
  • Design and validate: MOSFET-based power stages
  • Gate driver circuits (bootstrap, dead-time, protection features)
  • Current sensing (shunt / inline / Hall-based)
  • Voltage, temperature, and fault protection circuits
  • Support control interfaces such as PWM, DShot, UART, and CAN (DroneCAN)
  • Work closely with firmware engineers on AM32-based ESC firmware
  • Support hardware–firmware integration, tuning, and debugging
  • Assist in telemetry, fault reporting, and performance optimization
  • Design supporting power electronics including: DC–DC converters (buck / boost / auxiliary rails)
  • Battery input protection (reverse polarity, surge, TVS, soft-start)
  • Power distribution and filtering circuits
  • Perform thermal design, derating analysis, and reliability improvement
  • Implement EMI/EMC mitigation through circuit design and PCB layout guidance
  • Prototype bring-up and lab debugging
  • Switching waveform analysis using oscilloscopes and current probes
  • Thermal testing under load and stress conditions
  • Root-cause analysis of failures and design iteration
  • Support production validation and field issue resolution
  • Prepare schematics, BOMs, design notes, and test reports
  • Work with PCB layout engineers to ensure high-current layout best practices
  • Collaborate with mechanical, firmware, and system teams

Requirements

  • B.E. / B.Tech / M.Tech in Electronics, Electrical, or Power Electronics
  • Minimum 5 years of relevant experience in power electronics
  • Hands-on experience in ESC design is mandatory
  • Prior experience with UAV, EV, robotics, or motor-drive systems is preferred
  • Strong fundamentals in power electronics
  • Practical experience with: MOSFET selection and loss calculations
  • Gate driver design and protection strategies
  • High-current PCB design concepts
  • Current sensing and fault handling
  • Schematic design using KiCad or Altium
  • Proficiency with lab equipment (oscilloscopes, electronic loads, thermal tools)

Nice to have

  • Experience with AM32 firmware (highly preferred)
  • Familiarity with BLHeli or VESC ecosystems
  • CAN / UART-based ESC telemetry
  • EMI/EMC debugging experience
  • Ability to review or perform PCB layout for power electronics

What we offer

  • Healthcare, dental, vision, life insurance, Flexible Spending Account (FSA), Health Savings Account (HSA)
  • Vacation, Sick, and Holiday paid leaves
  • Pre-tax commuter benefits (parking and transit)
  • Brand-name product and services in categories like travel, electronics, health, fitness, cellular, and more
  • Only a couple blocs from BART, Caltrain, Highway 101, carpool pickup, and Bay Bridge
  • Tuesday Dinners, Monthly Lunch Mixers, Monthly Happy Hour, Annual day event
  • Play any sport with colleagues and the bill is covered
  • Peet's and Philz coffee provided all day to order and pantry snacks
EnerComp Solutions Pvt Ltd - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Senior Power Electronics Engineer

8 matching positions

Senior Electrical Engineer - Power Electronics

Location
Location
United States , Los Angeles
Salary
Salary:
Not provided
hermeus.com Logo
Hermeus
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 5+ years of relevant engineering experience
  • Legally authorized to work for any employer in the United States
  • Do not require employment visa sponsorship
  • Fulltime
Read More
Arrow Right

Senior Electrical Engineer - Power Electronics

The Propulsion team at Hermeus is seeking a highly skilled and motivated Senior ...
Location
Location
United States , Los Angeles
Salary
Salary:
146700.00 - 179300.00 USD / Year
hermeus.com Logo
Hermeus
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS Electrical Engineering or Mechanical/Aerospace with significant industry experience working with development of electrical component & systems
  • 5+ years of experience in multiple of the following areas: Battery design, motor controller design, harness design and fabrication, design for high EMI environments and appropriate mitigations, power conditioning, communication hubs/busses, bus converters, and PCB layout
  • Demonstrated project experience designing high power (>5kw) electronic components and or distributed systems
  • Strong analysis and troubleshooting skills
  • Willing to get your hands dirty and turn wrenches (or wield a soldering iron if that is more your speed)
Job Responsibility
Job Responsibility
  • Responsible for cradle to grave ownership of the electrical power architecture and components for all new vehicle development
  • Mentoring junior engineers and establishing standards and tools that level up the whole team
  • Working with a cross functional team of electrical and mechanical engineers to architect the power system to provide electrical, fluid and mechanical power to critical vehicle components for supersonic and hypersonic aircraft
  • Act as the bridge between mechanical and electrical disciplines
  • Responsible for the design of flight hardware in addition to all necessary ground and test equipment
  • Working with vendors to identify commercial off the shelf and custom solutions
  • Hands on hardware and support the build and test of multiple prototype vehicles
What we offer
What we offer
  • Unlimited PTO policy
  • Paid parental leave
  • Potential for year-end bonuses
  • 100% employer-paid health care
  • 401k & Retirement Plans
  • Weekly Paid Office Lunches
  • Fully stocked breakrooms
  • Stock Options
  • Fulltime
Read More
Arrow Right

Senior / Lead Power Electronics Engineer

Are you a power electronics specialist excited by the challenge of designing hig...
Location
Location
United States , Los Angeles
Salary
Salary:
Not provided
newspacetechnical.com Logo
NewSpace Technical
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering, Power Electronics, or similar (Master’s preferred but not required)
  • 5+ years’ experience in power electronics design, ideally within aerospace, automotive, defence, robotics, or high-reliability industrial systems
  • Strong experience designing switch-mode power supplies (SMPS) including topologies such as buck/boost, isolated converters, and multi-rail architectures
  • Proven ability to take hardware from concept through schematic, PCB, bring-up, debug, and qualification testing
  • Strong understanding of EMI/EMC principles, grounding, layout constraints, and mitigation strategies
  • Experience with power electronics simulation and analysis tools (SPICE, MATLAB/Simulink, or equivalent)
  • Confident working hands-on with test equipment (oscilloscopes, power analysers, electronic loads) in a lab environment
  • Strong communication and leadership skills – able to own designs, run reviews, and guide engineers through delivery
Job Responsibility
Job Responsibility
  • Lead the design, development, and verification of spacecraft power electronics (DC/DC converters, power stages, switching networks, protections)
  • Own power converter architecture, component selection, control loop design, and stability analysis
  • Develop and review schematics, PCB layouts, and design-for-manufacture principles for flight hardware
  • Support EPS power conditioning and distribution (PCDU) development including protections, fault handling, and power switching strategies
  • Perform detailed analysis including efficiency, thermal dissipation, transient response, EMC/EMI risk, and worst-case performance
  • Drive component qualification and parts selection for space environments (radiation tolerance, derating, thermal constraints)
  • Plan and execute test campaigns: functional, environmental (TVAC), vibration, EMC pre-compliance, and fault injection
  • Lead design reviews (PDR/CDR) and provide technical mentorship across the electrical team
  • Collaborate cross-functionally to define requirements, interfaces, and system-level trade-offs across mass/power/thermal margin
  • Support integration and on-orbit troubleshooting, ensuring rapid issue resolution when performance deviates from expected behaviour
What we offer
What we offer
  • Competitive Salary + Equity + Benefits + Flexible PTO
  • Fulltime
Read More
Arrow Right

Senior Power Engineer Analogue Design

An exciting opportunity to make a difference within the industry delivering high...
Location
Location
United Kingdom , Guildford
Salary
Salary:
Not provided
sstl.co.uk Logo
Surrey Satellite Technology Limited
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • At least 5 years Analogue/Power Electronics Design experience, ideally in the Space or Aerospace Industries
  • BTEC / Degree in Electronics or equivalent
  • Excellent understanding of analogue and power electronics
  • Familiarity with microprocessor and FPGA interfacing
  • Wide knowledge of electronic components, preferably for a space environment
  • Wide experience with schematic capture and simulation software (i.e. Mentor Graphics, OrCAD PSPICE, etc.)
  • Flexible and adaptable to changing priorities
  • Ability to work simultaneously on a variety of projects
  • Results orientated, can-do approach
  • Pro-active and able to take initiative
Job Responsibility
Job Responsibility
  • Undertaking the design, analysis, development, verification and delivery of power system and energy conversion solutions into different missions, including power subsystem lead responsibility for those missions
  • Requirements capture and derivation from top level requirements to module level requirements
  • Design and delivery of Analogue/Power Electronics Modules in Spacecraft, which meet these requirements within the agreed schedule/cost
  • Management and verification of these requirements
  • Carrying out the required analysis to verify that these requirements will be met over the mission life-time including FMECA, WCA, PSA, Reliability Analysis, etc
  • Specifying and carrying out the verification tests on hardware
  • Authoring of technical documents (including test/verification plans, procedures and technical descriptions)
What we offer
What we offer
  • 32 days Holiday plus Bank Holidays
  • Pension Scheme with Life Assurance
  • Private Medical & International Travel Insurance
  • Annual Bonus Scheme
  • Share Incentive Plan
  • Enhanced Maternity, Paternity & Shared Parental Pay for new parents
  • High Street Discount Scheme and many more
  • Fulltime
Read More
Arrow Right

Senior Electronics Engineer, Circuit Analysis and Simulation

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
134000.00 - 188000.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's or Master's degree in Electrical Engineering or related field
  • 5+ years of experience in circuit analysis and simulation for mixed-signal control systems
  • Proven expertise conducting WCCA, DFMEA, and margin analysis on MCU-based boards, sensor interfaces, or power management systems
  • Proficiency with SPICE simulation tools (PSpice, LTSpice, HSPICE) and MATLAB/Simulink
  • Strong understanding of MCU control circuits, analog sensor interfaces (resolvers, voltage/current sensors), PMICs, power sequencing, and component derating principles
  • Experience working cross-functionally with Safety and Reliability teams on risk assessment
  • Understanding of DO-254, DO-160, or similar aerospace/automotive safety standards
  • Excellent analytical and communication skills in multidisciplinary environments
Job Responsibility
Job Responsibility
  • Perform Worst Case Circuit Analysis (WCCA) and margin analysis on control and measurement circuits, including microcontrollers, resolver interfaces, PMICs, power trees, voltage/current sensors, and digital communications (CAN, SPI, etc)
  • Conduct circuit simulations using SPICE and MATLAB to validate designs across component tolerances, temperature extremes, and voltage variations
  • Lead Design Failure Mode and Effects Analysis (DFMEA) for control and sensor boards, working cross-functionally with Safety and Reliability teams to identify and mitigate risks
  • Analyze effects of single-event upsets and latch-ups on critical system functionality
  • Perform electrical stress analysis and component derating analysis
  • Support the design team with analytical validation of power management architectures, sensor interfaces, and MCU-based control circuits
  • Collaborate with hardware, controls, firmware, safety, and reliability teams to ensure designs meet aerospace performance and certification requirements
  • Generate analysis reports and technical documentation to support design reviews and DO-254/DO-160 compliance
  • Fulltime
Read More
Arrow Right

Senior Electronics Engineer

This is an exciting opportunity to join a fast‑moving, innovation‑driven enginee...
Location
Location
United Kingdom , Swansea
Salary
Salary:
50000.00 - 65000.00 GBP / Year
hunterselection.co.uk Logo
Hunter Selection | B Corp™
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree qualified (or equivalent experience) in Electronics, Electrical Engineering, or a closely related discipline
  • Demonstrable expertise in power electronics and high-voltage PCB design, supported by strong analogue and digital circuit design capability
  • Hands-on experience with microcontroller-based systems, along with exposure to Altium
  • Background within regulated sectors such as medical, automotive, aerospace, or similar environments desirable
Job Responsibility
Job Responsibility
  • Lead the end-to-end design and development of complex, high-density PCB assemblies, covering both analogue and digital circuitry, including designs with high transistor counts
  • Develop and integrate microcontrollers and processor platforms (PIC32 preferred, though alternative architectures considered) while supporting migration from Proteus to Altium for schematic capture and PCB layout
  • Contribute to safety-critical product development, applying isolation best practice and working to IEC 60601 standards where required
  • Support the full product lifecycle – from initial concept and prototyping through validation, verification and release – collaborating with multidisciplinary teams and applying power electronics expertise (up to 40kV) to drive innovation
What we offer
What we offer
  • 25 Days + Bank Holidays
  • Pension
  • Life Assurance cover
  • Company sick pay
  • Career progression opportunities
  • Hybrid working
  • Fulltime
Read More
Arrow Right

Senior Electronics Engineer - Radar Payload

We're looking for a Senior Electronics Engineer to play a pivotal role in our Ra...
Location
Location
Finland , Espoo
Salary
Salary:
Not provided
iceye.com Logo
ICEYE
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum of 5 years of experience in electronics engineering, with a strong preference for expertise in analog electronics
  • Highly desirable experience with power control and circuits for high-power RF amplifiers and low-noise power supply
  • Experience in the aerospace or military industry is highly desirable
  • Solid understanding of high-speed signals
  • Knowledge of EMI/EMC principles and best practices
  • Fundamental RF understanding is desirable
Job Responsibility
Job Responsibility
  • Board-level design of electronic systems for satellite radar units and RF boards, focusing on power and control circuits using microcontrollers
  • Conduct rigorous testing of designed boards to ensure functionality, performance, and compliance with specifications
  • Document design processes thoroughly, including schematics, layouts, and test procedures
  • Troubleshoot and resolve issues that arise during development, manufacturing, and in-orbit operations
  • Collaborate closely with cross-functional teams, including RF engineers, mechanical engineers, and software developers
  • Lead technical projects and apply a system-level vision to foresee challenges and drive innovative solutions
What we offer
What we offer
  • Occupational healthcare, occupational and private insurance
  • A yearly benefit budget to spend as you wish (i.e. on sport, transport, bike benefit, wellness, lunch, etc.)
  • Phone subscription with iPhone of choice
  • Relocation support (i.e. flight tickets, accommodation, relocation agency support)
  • Time for self-development, research, training, conferences, or certification schemes
  • Inspiring and collaborating offices and silent workspaces enable you to focus
  • A wide variety of the best coffee, tea, snacks, and sweets to accompany your daily space mission
Read More
Arrow Right

Principal Power Electronics Engineer

We are seeking a highly experienced and hands-on Principle Power Electronics Eng...
Location
Location
Canada , Burnaby
Salary
Salary:
130000.00 - 160000.00 CAD / Year
equinoxpowerinc.com Logo
EQUINOX POWER
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s Degree in Electrical Engineering or equivalent (Master’s Degree or Ph.D. is a strong plus)
  • Minimum 10 years of experience in designing high-performance, cost-effective power conversion products, with a proven track record of successful project delivery
  • Extensive experience with high-frequency switch mode power conversion products and 3-phase AC systems
  • Expertise in designing resonant power conversion topologies and advanced circuit topologies utilizing wideband gap devices (SiC or GaN MOSFETs)
  • In-depth understanding of feedback loop stability and analysis, with the ability to optimize complex control systems
  • Experience in the design and/or fabrication of high-frequency magnetics utilizing ferrite core materials
  • Proficiency in both analog and digital embedded control design, with the ability to read and debug firmware code
  • Strong background in EMC testing (FCC/CE) and safety testing (CSA/UL), with a deep understanding of compliance standards
  • Proficiency in using simulation tools such as PSIM, PLECS, LTSpice, MATLAB, and Simulink
  • Exceptional analytical and problem-solving skills, with a proactive approach to resolving complex technical issues
Job Responsibility
Job Responsibility
  • Lead the design and development of advanced power electronics systems, including inverters, converters, digital controllers, and power management systems
  • Oversee the creation of detailed engineering specifications, schematics, and layouts for power electronics products, ensuring accuracy and adherence to project requirements
  • Guide the team in the design, product development, testing, and troubleshooting of high-performance power conversion products: AC-DC, DC-DC, DC-AC, or AC-AC at various power levels ranging from 1kW to 30kW
  • Ensure compliance with regulatory requirements (e.g., UL, CSA, NEBS, FCC, CE, etc.) and drive the certification process
  • Architect and develop DSP or MCU-controlled (fully digital) power conversion systems from concept to commercial product, leveraging the latest technologies and methodologies
  • Develop and manage project timelines, milestones, and deliverables, ensuring projects are completed on time, within scope, and budget
  • Foster a culture of innovation, continuous improvement, and technical excellence within the engineering department
  • Prepare and review detailed technical documentation, including design reports, test reports, and user manuals
  • Present project status updates, technical findings, and strategic recommendations to senior management and stakeholders
  • Mentor and coach junior engineers, providing technical guidance and support to enhance team capabilities
What we offer
What we offer
  • Competitive salary and a benefits package
  • Extended health, dental, and vision coverage
  • 2 weeks paid vacation in the first year, plus 1 week off during the Christmas holiday season
  • Start-up environment fostering collaboration and innovation
  • Accelerated professional growth and development through working with leading-edge projects
  • Fulltime
Read More
Arrow Right