Senior Mechanical Engineer

Responsible for the design and layout of mechanical systems under the direction ...

Location

United States

Salary:

Not provided

Consulting Engineering Services

Expiration Date

Until further notice

Requirements

Mechanical Engineer with a minimum of 5 years of experience working with Plumbing and Fire Protection systems
BSME or equivalent degree or an equivalent combination of education and experience
Proven design experience in the areas of building operation, energy use Plumbing and Fire Protection, and building automation systems
Must be able to use AutoCAD and Revit, for drafting and design to complete a project
In depth knowledge of Mechanical Engineering/PFP codes, NFPA and applicable building codes and as well as ASPE standards. Knowledge of LEED, accreditation preferred
Must be able to travel and visit work sites as necessary to the job at the time convenient for the clients, contractors and building managers
Maintain knowledge and skills in the particular area of expertise by attending conferences, reviewing scientific journals and participating in specific industry standards organizations such as NFPA, ASHRAE, etc.
PE license strongly preferred

Job Responsibility

Coordinate all mechanical, functional and administrative matters related to project plans, sketches, specifications, estimates, studies and special provisions within a project package
Review other teams design projects
Utilize professional engineering skills and knowledge to troubleshoot a variety of field issues through research and meeting with key process members, designers and area experts
Communicate progress and prepare appropriate reports as needed throughout the project
Handle projects from inception to completion including continuous interface with clients, the design team, architects and owners
Ensure timely delivery of all completed projects
meet project schedules set by the Project Manager
Evaluate building energy performance via on site field measurements and energy analysis methods
cooling and heating load calculations, duct sizing, equipment selection, writing specifications and cost estimating
Monitor construction progress and C.A. correspondence to ensure accurate and timely responses to R.F.I.’s and related issues

Senior Mechanical Engineer: Test Development Engineering

As a Senior Mechanical Engineer in Test Development Engineering, you will play a...

Location

United States , South Jordan, Utah

Salary:

Not provided

Cricut

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical Engineering, Mechatronics, or a related field
10+ years of experience in mechanical design, test and calibration equipment development, or precision metrology systems
Proficiency in CAD software (Creo, SolidWorks) and related engineering analysis tools (FEA, tolerance analysis)
Strong understanding of mechanical systems, pneumatic and electromechanical integration, and manufacturing processes
Deep knowledge of measurement science, tolerance analysis, and statistical methods for calibration and product qualification
Experience in test system design, metrology instrumentation, and mechanical calibration processes
Hands-on experience with mechanical test setups, data acquisition, and troubleshooting of measurement systems
Excellent analytical, problem-solving, and documentation skills
Strong communication skills and ability to lead cross-functional technical efforts

Job Responsibility

Conceptualize, design, and document assembly jigs, test fixtures, and precision metrology systems to support both production and validation testing
Develop custom calibration and test instruments, including mechanical, pneumatic, and electro-mechanical assemblies for high-accuracy measurements
Integrate sensors, load cells, displacement transducers, pressure gauges, and other instrumentation into test systems to support product calibration and verification
Collaborate with cross-functional teams (Design, Manufacturing, Quality, Calibration Labs, and Contract Manufacturers) to define test requirements and system capabilities
Utilize CAD software (Creo, SolidWorks) to create detailed 3D models and drawings of mechanical systems, with GD&T applied for precision alignment and repeatability
Generate and maintain Requirement Documents, Calibration Procedures, and Test System Specifications to ensure alignment between product and test design intent
Participate in supplier design reviews and qualification of external test and calibration equipment
Develop and validate test procedures, calibration methods, and verification plans for measurement systems and mechanical fixtures
Ensure measurement system analysis (MSA), gage R&R, and traceability to NIST or equivalent standards in all calibration processes
Conduct statistical evaluations of test data to assess system reliability, repeatability, and reproducibility

What we offer

competitive Medical, Dental, and Vision coverage
401(k) match
generous PTO
tuition reimbursement
yearly lifestyle stipend
exclusive employee discounts

Fulltime

Senior Mechanical Engineer - Nuclear

As a Senior Mechanical Designer Engineer - Nuclear you will be taking on a new c...

Location

United States , Lewis Center

Salary:

Not provided

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Mechanical Engineering, Science or Technology
Professional Engineer License would be an asset
10+ years of experience in engineering design, development and qualifications of automated systems custom machinery or industrial equipment
5+ years of experience in nuclear tooling development and testing, preferably including field support and experience
In-depth knowledge of and use of nuclear equipment quality standards (NQA-1, ASME BPV Section III)
Thorough understanding of machine design and build, machine controls, structured problem solving, statistical analysis, and precision engineering principles
Good written and oral communication skills and ability to lead or work as part of a multi-disciplinary project team
Work in conformance with divisional health, safety and environmental procedures and compliance to legislative requirements
Refrain from removing or altering safety devices or guarding unless hazardous energies are controlled through lockout-tagout methods
Report any unsafe conditions or unsafe acts, defects in any equipment or protective device, and any accidents/incidents to the supervisor

Job Responsibility

Design and support the development of Automated Equipment for industrial and nuclear projects
Perform engineering calculations with respect to strength of materials, speeds, horsepower, temperature, pressure, force, etc. as related to machine and tool designs
Analyze engineering drawings and specifications to determine shape, dimensions, hardness, etc. in the development of equipment, processes, and products
Define tools, fixtures, and equipment to be used in fabrication and assembly of mechanical components and complete assemblies
Produce working drawings, detail drawings, and bills of materials for equipment, sub-assemblies, or products, using AutoCAD and SOLIDWORKS
Specify appropriate purchase components for mechanical assemblies and create requisitions with appropriate delivery dates
Analyze designs and systems for compliance with applicable standards (i.e., OSHA, CE, or customer-specific)
Strictly follow ASME NQA-1 Quality requirements as defined within the manual and procedures
Work cross functionally with other teams
Review electrical requirements with respect to input and output devices with electrical designers

What we offer

Flexible work schedules
Employee events
Free coffee beverages
Employee referral program
Safety shoe programs
Overtime pay eligibility
Paid vacation
Company paid short- and long-term disability and life insurance
Comprehensive health benefits
401K matching program

Senior Imaging Systems Engineer

As a Senior Imaging Systems Engineer, you will be a key technical leader respons...

Location

United States , Boston

Salary:

105600.00 - 154900.00 USD / Year

SimpliSafe

Expiration Date

Until further notice

Requirements

Bachelor's or Master's degree in Electrical Engineering, Optical Engineering, Physics, Imaging Science, Computer Science or a closely related field
5+ years of progressive experience in camera system design, development, and validation, with a proven track record of bringing imaging products to market
Deep expertise in: CMOS Image sensor technologies and their low-level characteristics
Optical system design, analysis, and characterization (e.g., MTF, distortion, CA, stray light, lens manufacturing processes)
Advanced Image Quality (IQ) metrics, testing methodologies, and industry-standard tools like IMATEST
Leading Image Signal Processor (ISP) tuning and optimization across various platforms
Camera module integration, calibration, and complex debugging
Low power, always on, imaging
Proficiency in scientific programming languages (e.g., Python, MATLAB) for data analysis, automation, and image processing
Familiarity with optical design software (e.g., Zemax, Code V, TracePro)

Job Responsibility

System Architecture & Design Leadership: Lead the architectural definition and design of complex camera modules and imaging systems, balancing optical, electrical, mechanical, lighting, and software considerations. Drive critical design decisions and contribute to the product roadmap
Advanced Imager & Lens Expertise: Spearhead the research, evaluation, and selection of cutting-edge image sensors based on rigorous performance criteria, including high dynamic range, low-light sensitivity, noise performance, and power efficiency. Define and critically evaluate optical lens systems for optimal performance, ensuring excellence in MTF, distortion, chromatic aberration, and stray light control. Design lighting to optimize image quality and power. Act as a primary technical liaison with imager, DSP, camera lens and optical component vendors, influencing future development
Rigorous Prototyping & Characterization: Develop and execute advanced test plans for camera prototypes, performing deep-dive characterization of imager and lens performance. Utilize and develop measurement techniques for noise analysis, linearity, spectral response, and other key parameters
Image Quality Mastery & Tuning: Design, implement, and lead comprehensive objective and subjective image quality (IQ) testing, covering parameters like color accuracy, white balance, exposure, sharpness, and noise. Employ and potentially develop advanced image quality analysis tools (e.g., Imatest). Work with ODM, Image and ISP SoC vendors to expertly calibrate and fine-tune Image Signal Processor (ISP) parameters to achieve industry-leading image quality across diverse challenging environments and use cases. Proactively identify, diagnose, and resolve complex image quality artifacts and propose innovative solutions
Validation & Production Readiness: Own the development and execution of robust validation plans for production-ready camera systems, ensuring compliance with all functional, performance, reliability, and regulatory requirements
Travel: Willing to travel to Asian manufacturing partners 1-3 times per year

What we offer

A mission- and values-driven culture and a safe, inclusive environment where you can build, grow and thrive
A comprehensive total rewards package that supports your wellness and provides security for SimpliSafers and their families
Free SimpliSafe system and professional monitoring for your home
Employee Resource Groups (ERGs) that bring people together, give opportunities to network, mentor and develop, and advocate for change
Participation in our annual bonus program, equity, and other forms of compensation, in addition to a full range of medical, retirement, and lifestyle benefits

Fulltime

Mechanical Engineer

The Mechanical Engineer will serve as a technical authority for our client. This...

Location

United States , Arlington

Salary:

Not provided

Talent Acquisition Concepts

Expiration Date

Until further notice

Requirements

Bachelor's Degree in Mechanical Engineering or a related field is required
A Virginia Professional Engineer (PE) registration or the ability to acquire a Virginia PE through reciprocity within 6 months is required
5 years of direct experience in facilities mechanical systems such as HVAC, Plumbing (domestic water) systems, Building Automation Systems (BAS), and testing adjusting and balancing (TAB) is required
Experience using AutoCAD and/or Micro Station to prepare design plans is required
Must be proficient in the use of MS Office suite and scheduling software
Experience with database management systems for commissioning and core business processes is necessary
U.S. Citizenship Required
Must be able to obtain/maintain a security clearance

Job Responsibility

Perform energy management, HVAC and life safety surveys, and facilities management evaluations and condition assessments
Prepare feasibility studies for design and construction
Prepare engineering or repair/replacement estimates and schedules
Present reports and explain findings to clients
Conduct design reviews, submittal reviews, reviews and facilitation of training plans, and O&M manual reviews
Prepare mechanical design calculations
utilize mechanical design software
Write technical specifications and develop drawings and visual aids
Review and provide comments on designs for configuration, reliability, redundancy
Review equipment and controls technology selections and strategies

Fulltime

Senior Controls Engineer

Carbon is looking for a print algorithm and controls engineer in our Print Depar...

Location

United States , Redwood City

Salary:

132800.00 - 199200.00 USD / Year

Carbon, Inc

Expiration Date

Until further notice

Requirements

BS or MS in Controls, Mechanical, Mechatronics, or Electrical Engineering or related field
At least 6 years of industry experience
Multi-language programmer from prototyping (e.g., Python, MATLAB) to production (C++)
Experience implementing closed loop control systems from prototype (Python) to production (C++)
Experience in system identification and digital signal processing
Experience implementing and automating diagnostics, system health checks, GUI tools, calibration, and performance scripts

Job Responsibility

Demonstrate subsystem prototype viability and guide system designs from conception to production level functionality
Interface with hardware engineers to provide design recommendations for actuator, sensor, and electrical (ADC/DAC) designs
Identify subsystem anomalies during integration phase and provide design recommendations
Design and implement novel data structures and control / optimization algorithms in a distributed compute setting through Carbon's code review process
Interface with the support team to diagnose and solve print and process issues in the field

What we offer

Equity
Benefits
Time off programs

Fulltime

Senior Plumbing/Fire Protection Engineer

Responsible for the design and layout of mechanical systems under the direction ...

Location

United States

Salary:

Not provided

Consulting Engineering Services

Expiration Date

Until further notice

Requirements

Mechanical Engineer with a minimum of 5 years of experience working with Plumbing and Fire Protection systems
BSME or equivalent degree or an equivalent combination of education and experience
Proven design experience in the areas of building operation, energy use Plumbing and Fire Protection, and building automation systems
Must be able to use AutoCAD and Revit, for drafting and design to complete a project
In depth knowledge of Mechanical Engineering/PFP codes, NFPA and applicable building codes and as well as ASPE standards
Must be able to travel and visit work sites as necessary to the job at the time convenient for the clients, contractors and building managers
Maintain knowledge and skills in the particular area of expertise by attending conferences, reviewing scientific journals and participating in specific industry standards organizations such as NFPA, ASHRAE, etc.

Job Responsibility

Coordinate all mechanical, functional and administrative matters related to project plans, sketches, specifications, estimates, studies and special provisions within a project package
Review other teams design projects
Utilize professional engineering skills and knowledge to troubleshoot a variety of field issues through research and meeting with key process members, designers and area experts
Communicate progress and prepare appropriate reports as needed throughout the project
Handle projects from inception to completion including continuous interface with clients, the design team, architects and owners
Ensure timely delivery of all completed projects
meet project schedules set by the Project Manager
Evaluate building energy performance via on site field measurements and energy analysis methods
cooling and heating load calculations, duct sizing, equipment selection, writing specifications and cost estimating
Monitor construction progress and C.A. correspondence to ensure accurate and timely responses to R.F.I.’s and related issues

Senior Electro-Mechanical Assembly Technician

Perform high-quality electro-mechanical manufacturing and assembly of automated ...

Location

United States , South Windsor

Salary:

Not provided

Bloomy

Expiration Date

Until further notice

Requirements

Minimum of 7 years of electro-mechanical assembly experience
Minimum of 7 years in systems build/implementation per engineering drawings, schematics or wire diagrams
Detail oriented and organized
Strong mechanical and electrical aptitude and ability to perform point-to-point wiring
Ability to work in a team environment

Job Responsibility

Assembly of automated test systems, test fixtures, cables, harnesses, and PCB assemblies
Logical layout and design of electrical shelfs / panels
Provide technical assistance and collaborate with engineers and other personnel to identify, define, and solve problems before, during and after assembly
Modify prototypes, parts, assemblies, and systems to correct defects
Test completed assemblies to ensure proper operation
Obtain and/or maintain the following IPC certifications: J-STD-001 specialist, IPC-A-610 specialist, and IPC-A-620 specialist
Follow and maintain company documentation standards
Maintain and improve company quality processes
Maintain inventory and maintenance of company tools
Assure a clean and safe work environment

Senior Mechanical Engineer – Automation & Process Systems

JR Automation

Location:
United States , Nashville

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
April 16, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Senior Mechanical Engineer – Automation & Process Systems

Senior Mechanical Engineer