Senior Materials and Corrosion Engineer Job at Airswift Sweden (Perth)

Professional Senior, Engineering, Materials and Processes

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

Mexico , Colon

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Bachelor or Masters degree in Materials, Mechanical or Chemical engineering from an accredited university
Minimum of ten (8) years of experience in an aerospace/military production environment
Thorough knowledge of aerospace materials with experience in standard hardware and processes used for the manufacture of aircraft
Knowledgeable about metallic materials used in the aerospace industry like aluminum, steel and titanium including knowledge of their corrosion behaviors
Knowledgeable about different manufacturing processes like Heat Treatment, Shot Peening and Surface Treatment of aluminum
Familiar with aerospace and military specifications like SAE, AMS, MIL, etc.
Proficient in engineering design principles and reviewing drawings
Adept at solving engineering problems in a high-pressure environment and can deal with complex issues quickly and independently
Pro-active mindset and ability to manage multiple priorities
Must be able to work in a team environment and collaborate with Technical Experts, Professionals and Technicians on a daily basis

Job Responsibility

Provide technical engineering guidance as necessary to designers, structural engineers, technical writers, liaison engineers, customer support, Quality, buyers and laboratory staff on the applications, properties and processing of aircraft materials and hardware
Review and approve engineering drawings, change documentation, certification plans and release documentation pursuant to technical engineering modifications/specifications for materials in general
Execute various engineering tasks like the evaluation of different metallic materials, their processes and limitations
Prepare various test plans, analyze results and write certification reports
Review production process documents prepared by other functions and recommended for approval
Prepare, administer and approve standard technical engineering practices, procedures, design guidelines and corporate/site specific standards contained in Bombardier Manuals
Support on-going continuous improvement initiatives to increase team efficiency through relevant engineering, process, and other capability improvements
Provide technical direction to junior and intermediate members of the team to accomplish day to day tasks
Keep abreast with current materials and hardware technology and development, suitable for use in company products, through contacts with various external agencies

What we offer

Insurance plans (Medical, life insurance, and more)
Employee Assistance Program
Competitive base salary

Fulltime

Senior Engineer

The objective of the role is to execute preventive /breakdown maintenance of PNG...

Location

India , Mumbai

Salary:

Not provided

Randstad

Expiration Date

August 23, 2026

Requirements

Knowledge & Experience in Maintenance activity preferably Oil & Gas
Material Standards & Technologies
Full time BE (Mechanical)
2 - 5 years' experience in Preventive/Breakdown maintenance in Oil & Gas industry

Job Responsibility

HSE: Conduct interactive sessions with contractors/contract employee to promote HSE policy
Ensure timely closure of safety actions
Ensure safety procedures are followed at site
Resolution of customer complaints: Improve efficiency of emergency response team
Ensure availability of tools, services and tackles
Liaise with internal stakeholders
Liaise with external stakeholders
Breakdown/Preventive maintenance: Ensure availability of spares
Execute maintenance as per schedule
Ensure minimum breakdown after preventive maintenance

Fulltime

Senior MAP Flightline Engineer

Airbus Commercial Aircraft is looking for a Senior MAP Flightline Engineer to jo...

Location

United States , Mobile

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

B.S. or M.S. degree in aerospace, mechanical, electrical or aircraft construction engineering or an equivalent combination of education and experience.
9+ years relevant experience in an Engineering, M.E or engineering coordination role.
Structure design (composite/carbon fiber and metallic)
Experience in design office (design or stress) of aircraft structures (Airframe)
Knowledge in fatigue and damage tolerance justification
Knowledge of stress calculations / justifications
Knowledge of aeronautical used materials and corresponding corrosion protection
Knowledge of repair design and stress principles
Knowledge of Aircraft configuration management rules
Knowledge of AIRBUS internal procedures, processes and tools

Job Responsibility

Accountable for design engineering activities in the aircraft systems (Aircraft Control & Monitoring, Avionics, power & Mechanical systems, Powerplant).
Creation and authorization of technical solutions including justification reports for repairs, reworks or design updates. Standard repairs are approved autonomously, major repairs if required with the support of the transnational Airbus Engineering departments (design, stress, fatigue, aerodynamics, material etc.).
Define technical solutions during NC treatment for metallic and composite structures comprising the complete primary / secondary aircraft structure (all Airframe ATA chapters linked to structure design).
Accountability for the given approved repair, rework, and troubleshooting instruction as well as for design update solutions in front of the corresponding design/stress office and authorities (TC/FAA).
Represent and act in the name of the Chief Engineering and the design offices of AIRBUS (by delegation) as well as design to build suppliers.
Act as an interface between the A220 Family Chief Engineer/ Design office and the Manufacturing/ Quality assurance (Operations).
Provide engineering support to the FAL US during the complete manufacturing process from the delivery of the sections, FAL and flightline activities, up to the aircraft ferry flight in all structure related items including engineering presentations in front of the customers (internal and external).
Create, approve, and authorize temporary aircraft definitions (special instructions) in line with design and airworthiness requirements for testing purposes.
Create, approve and monitor design corrective actions / improvements and preventive measures (launch of new modifications, drawing updates, design query notes) driving product improvements or non-conformity eradication.
Present technical explanations/corrective actions to the flight test department and to the customer if required (internal and external customers).

What we offer

Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”)
Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program.
Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages.
Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility.
At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we support flexible working arrangements to stimulate innovative thinking.

Fulltime

Senior Offshore Structural Engineer

BMT is recruiting for an Offshore Senior Structural Engineer to join our experie...

Location

United States , Houston

Salary:

140000.00 - 165000.00 USD / Year

BMT

Expiration Date

Until further notice

Requirements

Experience within the North American Energy industry, specifically offshore pipelines and facilities
Over 10 years of related engineering experience
Proven engineering skills and ability to attain or possess a professional engineering designation
Degree in Mechanical, Metallurgical or Civil Engineering, and a relevant post-graduate degree is preferred
In depth subject matter expertise related to design and fitness for service assessment of offshore structures
Ability to execute or coordinate numerical modelling (e.g. finite element modelling, computational fluid dynamics)
Experience working with industry standards
Knowledge and experience developing integrity management plans (IMP)
Knowledge related to reliability and risk assessment

Job Responsibility

Conduct and support the design and integrity assessment of offshore platforms, risers, umbilicals, and associated equipment
Conduct the structural assessment of built assets under a variety of loading conditions to support the identification of optimal locations for instrumentation including motion sensors and strain gauges
Ability to complete or support the completion of engineering assessments, integrity management program activities, engineering critical assessments, and interpretation of NDE inspection reports for cracks, corrosion, deformations, and other threats for offshore oil & gas assets
Be a technical leader for offshore structural engineering
Have experience and familiarity with relevant US and global offshore codes and standards
Support project and business management
Identify opportunities for technology and staff improvement
Review, discuss and refer business opportunities to appropriate business units (e.g., Structural Integrity, Welding, Materials, Software & Instrumentation, Design & Construction)
Executing and directing technical projects
Providing guidance and mentoring to junior staff

What we offer

health
dental
vision
life insurance
long term disability
short term disability
health care flexible spending account
dependent care reimbursement plan
401k
PTO

Fulltime

Senior Nuclear Fluid Systems Engineer

The Nuclear Fluid Systems Engineer will be responsible for the design, analysis,...

Location

Italy , Pisa

Salary:

50000.00 - 60000.00 EUR / Year

Danem People France

Expiration Date

Until further notice

Requirements

Master’s degree in Mechanical Engineering, Nuclear Engineering, or a related field
3-7 years in fluid system design, thermal-hydraulic analysis, or nuclear plant operations (entry-level positions may require internships or co-op experience)
Expertise in fluid dynamics, thermodynamics, and heat transfer principles
Proficiency in hydraulic modeling and simulation software (e.g., ANSYS Fluent, STAR CCM+, Flowmaster)
Knowledge of nuclear reactor coolant systems, heat exchangers, and steam turbines
Familiarity with ASME BPVC, NRC regulatory requirements, and ANSI standards for nuclear fluid systems
Strong analytical and problem-solving abilities
Effective communication and teamwork skills for collaboration with engineers, operators, and regulatory agencies
Attention to detail and a commitment to nuclear safety and compliance
Ability to work under pressure and manage multiple projects with strict deadlines

Job Responsibility

Designing, analyzing, and optimizing nuclear fluid systems, including reactor coolant, steam generation, condensate, and hydraulic systems
Conducting thermal-hydraulic modeling, flow analysis, and pressure drop calculations to ensure system efficiency and safety
Developing and maintaining system documentation, including flow diagrams, P&IDs, operating procedures, and safety reports
Performing system reliability assessments, troubleshooting, and root cause analysis for fluid system failures
Ensuring compliance with NRC (Nuclear Regulatory Commission) regulations, ASME codes, and other industry standards
Collaborating with reactor engineers, safety specialists, and regulatory bodies to enhance fluid system performance
Supporting the testing, commissioning, and maintenance of fluid systems in nuclear facilities
Assisting in plant modifications, upgrades, and retrofits for improved efficiency and regulatory compliance
Evaluating material compatibility and corrosion effects to ensure long-term fluid system integrity
Providing technical support and training to plant operators and maintenance personnel

Fulltime

Senior or Principal Pipeline Integrity Engineer

BMT is recruiting for a Senior or Principal Pipeline Integrity Engineer to join ...

Location

Canada , Ottawa

Salary:

105000.00 - 165000.00 / Year

BMT

Expiration Date

Until further notice

Requirements

Experience within the North American Energy Pipeline and/or Industrial Plant Service sector
Over 10 years of related engineering experience
Proven engineering skills and a valid Professional Engineering license in Canada
Post-Graduate degree in Mechanical, Metallurgical or Civil Engineering is preferred
In depth subject matter expertise related to several of design, fitness for service assessment (i.e. cracking, corrosion, weld fault, geohazard, hydrotechnical hazard assessment), materials, welding, forensic investigation
Ability to execute or coordinate numerical modelling (e.g. finite element modelling, computational fluid dynamics)
Experience working with industry standards CSA Z662, API 579, API 1104, BS 7910, ASME BPVC, ASME B31 series
Knowledge and experience developing integrity management plans (IMP)
Knowledge of in line inspection tools, reporting and program development
Knowledge related to reliability and risk assessment

Job Responsibility

Conduct and support the completion of engineering assessments, integrity management program activities, engineering critical assessments, and interpretation of inline inspection (ILI) and inspection reports for cracks, dents, corrosion, deformations, and other threats for onshore oil & gas facilities and pipelines
Be a technical leader for pipeline and/or pressure vessels and piping design and integrity assessment considering pressure, geotechnical and thermal loading
Have experience and familiarity with relevant Canadian and US pipeline and energy sector standards and codes of practice to lead project teams in code compliance review and assessments
Support project and business management
Identify opportunities for technology and staff improvement
Review, discuss and refer business opportunities to appropriate business units (e.g., Structural Integrity, Welding, Materials, Software & Instrumentation, Design & Construction)
Executing and directing technical projects
Providing guidance and mentoring to junior staff
Write, review and contribute to project reports
Manage and contribute to multiple projects simultaneously

What we offer

Medical, dental and vision plan (including a Health Care Spending Account)
Employee and Family Assistance program
Parental/Maternity leave top-up program
RRSP or TFSA matching program
Flexible work hours and hybrid work arrangement
Training and development opportunities
Employee recognition program
Employee referral program

Fulltime

Senior QAQC Inspector - Advance NDT

To interpret the suitability of products and processes against the designated sp...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor of Engineering - Mechanical / Metallurgy or Equivalent
NDT certificate in ASNT/PCN Level III for methods in UT, RT, PAUT and TOFD, as minimum
NDT certificate in ASNT/PCN Level II for methods MT and PT, as minimum
CSWIP 3.1 certification and NDT Certificate in ECT, preferred
Minimum 10 years of working experience as NDE personnel for Oil & Gas projects, preferably in LNG (greenfield, brownfield, shutdowns, and live plant environments)
Demonstrated minimum 4-6 years of hands-on experience in advance NDT (PAUT/TOFD) post certification and NDT data interpretation, procedure review, scan plan assessment, and technical validation of contractor inspection outputs
Practical experience in interpretation and acceptance evaluation of weld inspection results against ASME Section V, ASME B31.3, ASME VIII, API 1104, API 5L, project specifications, and approved inspection procedures
Demonstrated understanding of welding processes, weld joint configurations, weld repair scenarios, heat affected zone considerations, common fabrication and service-induced discontinuities, and the impact of welding variables on NDT technique selection and interpretation
Demonstrated ability to assess inspection limitations arising from geometry, restricted access, material condition, and weld profile, coating, cladding, or in-service constraints, and recommend technically suitable inspection approaches
Extensive experience with reviewing/interpretation of PAUT/TOFD, RT Film and witnessing of MT and PT methods

Job Responsibility

Engage with external Contractors to perform PAUT/TOFD and advance NDT techniques and perform defect sizing, characterization
Review and technically assess contractor-issued NDT reports, interpretation records, images, and supporting inspection data to confirm adequacy, traceability, and compliance prior to acceptance
Review and verify NDT procedures, technique sheets, personnel certifications, calibration records, equipment validity, and qualification records prior to commencement of inspection activities
Ensure full traceability between weld maps, line/component identification, NDT reports, repair history, final inspection status, and supporting quality records
Interpret advance NDT data and evaluate indications against the applicable acceptance criteria (ASME, API, Project specs.) and prepare and accurate inspection reports with supporting data/images
Engaging contractors and applicable third-party organizations with a professional approach and maintain a good working level relationship
Review contractors documented quality deliverables in accordance with the requirements and expectations of COMPANY and provide clear, concise output to the applicable quality focal point
Evaluate the suitability of products and processes at key stages against the prescribed specification requirements and is effectively implemented
Ensure NDE traceability of inspected welds and components
Continuously monitor the quality of works in progress at site and at the EPC Contractor fabrication workshop against the applicable NDT Procedure and COMPANY technical specification

Fulltime

Qa/qc Inspector (Welding)

Location

China , Qingdao

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Minimum Higher National Diploma (HND) or Diploma in Mechanical, Welding, Metallurgy, or equivalent
Certification as AWS SCWI, CSWIP 3.2 Senior Welding Inspector, or equivalent
ASNT Level II certification in NDT methods (VT, MT, PT, RT, UT)
Strong knowledge of international codes and standards including AWS, API, ASME, ASNT, EN, DEP, and ISO
Proficient in MS Office and database management systems
Minimum 10 years of welding and NDT inspection experience, including at least 5 years post-certification within the Oil & Gas industry
Minimum 5 years of offshore project experience
Proven experience in inspection and testing for major oil & gas projects, including offshore process platforms and jackets across all phases (manufacturing, fabrication, construction, and installation)
Experience in inspection of structures, piping, offshore pipelines, and materials across various welding processes
Familiarity with advanced NDT techniques such as UT, AUT, and PAUT

Job Responsibility

Ensure quality requirements for fabrication, construction, and installation activities are implemented in accordance with approved quality procedures, plans, and project documentation
Verify that contractors, subcontractors, and vendors deploy competent resources, follow internationally accepted practices, and deliver products compliant with corporate and project quality standards
Participate in inspection, surveillance, and audit activities involving contractors, subcontractors, vendors, manufacturers, suppliers, and third-party inspection and certification bodies
Review and verify project quality documentation, including Inspection & Test Plans (ITPs), Method Statements, Work Procedures, and WPS/PQR documents
Confirm personnel qualifications and ensure calibration status of inspection equipment is valid
Attend material receiving inspections and review Material Test Certificates (MTCs)
Monitor welding activities at site and fabrication yards to ensure compliance with approved Welding Procedure Specifications (WPS)
Attend Procedure Qualification Record (PQR) mechanical testing and witness welder qualification tests, including evaluation of visual inspections and NDT results
Witness and interpret daily NDT activities at site and fabrication yards, and assess inspection findings
Participate in dimensional control inspections, including laser survey inspections where applicable

Fulltime

Select Country

Senior Materials and Corrosion Engineer

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?