CrawlJobs Logo

Senior Manufacturing Test Engineer

bostondynamics.com Logo

Boston Dynamics

Location Icon

Location:
United States , Waltham

Category Icon
Category:
IT - Software Development

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

134399.00 - 184798.00 USD / Year
Save Job
Save Icon
Apply Position

Job Description:

As a Senior Staff Manufacturing Test Engineer for the Atlas program, you will lead the development of the test systems that are used in the manufacture of our Robotics Systems. You will document, design, and deploy test equipment, software, and procedures for supplier production testing, in-house production testing, and system level testing. With a focus on factory acceptance test systems, you will interact with the hardware design, electrical, software, manufacturing, test, and quality engineering teams to ensure the appropriate test coverage and product performance for the top level robot assembly and subassemblies made for our robotics systems.

Job Responsibility:

  • Act as a technical liaison to manufacturing and production teams and provide test engineering support to drive continuous improvement for test method/machine related issues
  • Provide design for test (DFT) recommendations for test coverage, fault isolation capability, and failure trends
  • Document test procedures, fixtures, configurations, and best practices
  • Deliver turnkey test solutions for electromechanical parts and assemblies of new robots or sustaining tests for existing robots
  • Provide project management and design support for outsourced test development
  • Analyze test results and provide feedback to improve product quality and testing processes
  • Work with quality and process engineering teams to support failure analysis of test failures to drive root cause corrective actions
  • Support station duplication, maintenance, and deployments for repair and service teams
  • Train both internal and external manufacturing in the use and support of production test equipment, test programs, and debug processes
  • Support internal factory and services teams implementing new and supporting existing test solutions
  • Mentor other team engineers and technicians

Requirements:

  • BS or MS in Robotics/Electrical Engineering or equivalent and 6+ years of relevant experience
  • Strong understanding of electromechanical and software fundamentals
  • Solid working knowledge of basic electrical equipment, including digital multimeters, oscilloscopes, and power supplies
  • Proven experience in directing resources for efficient execution of test systems or laboratory operations
  • Test software development using programming languages such as Python or C++
  • Able to read electrical schematics and mechanical drawings and apply fundamental knowledge to analyze designs
  • Comfortable with analog and digital test and debug techniques for medium to high complexity systems
  • Self-motivated and able to work in an ambiguous environment with minimal supervision

Nice to have:

  • Experience designing moderate complexity electro-mechanical structures to be used in a production or customer-facing environment in CAD (Catia, NX, Solidworks, etc.)
  • Experience in robotics, aerospace, precision actuators, or high-performance electromechanical systems
  • Experience with PLM systems such as Arena or Enovia for revision control and documentation management
  • Experience with MES platforms such as Tulip for test workflows
  • Experience working with external suppliers, contract manufacturers, or design firms on tooling and test requirements
  • Background supporting research-to-product transitions where designs and processes evolve rapidly
  • Experience with schematic capture and PCB layout software using Altium or equivalent
  • Experience with Windows and Linux operating systems
  • Experience with root cause analysis supported by data analytics
What we offer:
  • medical
  • dental
  • vision
  • 401(k)
  • paid time off
  • annual bonus structure

Additional Information:

Job Posted:
February 04, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Boston Dynamics - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Senior Manufacturing Test Engineer

Senior Manufacturing Engineer, Wing

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
122880.00 - 153600.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s or advanced degree in Aerospace, Mechanical, or Manufacturing Engineering (or equivalent experience)
  • 8+ years in aerospace manufacturing, with a focus on airframe assembly and composite structures
  • prototype or experimental aircraft experience strongly preferred
  • Proven track record of driving DFM principles for complex composite parts (layup, bonding, cure)
  • Expertise in advanced manufacturing tools (CAD, PLM, MES)
  • Strong leadership, communication, and cross-functional coordination skills to set direction and mentor a diverse engineering team
  • Ability to thrive in a dynamic, high-iteration environment, balancing big-picture program goals with hands-on, real-time build solutions
Job Responsibility
Job Responsibility
  • Provide overarching leadership and technical direction for airframe manufacturing processes, including composite layup, bonding, trimming, metallic integration, and assembly sequencing
  • Own the end-to-end lifecycle of airframe builds, collaborating with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation from concept to flight test readiness
  • Drive tooling strategies and fixture development for prototype builds, balancing the need for high precision with practical solutions suited to low-volume, rapidly evolving programs
  • Serve as the primary subject matter expert on the shop floor, leading root-cause analysis and implementing timely corrective actions to maintain schedule, quality, and structural integrity
  • Act as a key liaison with supply chain and regulatory bodies (FAA), ensuring materials, documentation, and processes align with certification objectives
  • Mentor and guide manufacturing engineers and technicians at all levels, setting best practices, championing innovative problem-solving, and fostering a hands-on culture of ownership and accountability
  • Fulltime
Read More
Arrow Right

Senior Manufacturing Process Engineer

Ready to join a team of visionaries who is dedicated to solving one of humankind...
Location
Location
Germany , Munich
Salary
Salary:
Not provided
climeworks.com Logo
Climeworks
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree in process engineering, manufacturing engineering, mechanical engineering, materials science, or similar
  • 5-10 years of experience in a manufacturing environment including significant experience with start-up phases and successful delivery of commercial products
  • Experience with continuous manufacturing lines including powder handling processes (HSE regulations and ATEX requirements)
  • Logic-driven, experienced with both process modeling approaches (heat and mass transfer, etc.) as well as structured risk-identification and problem-solving tools (e.g., process FMEA, 5 Whys, Fishbone)
  • Take initiative, are results-driven without missing important details, and are hands-on throughout the full development cycle—from lab to high-level evaluations
  • Collaborate easily across teams, communicate clearly, and enjoy leading both in-house and external projects
  • Fluent in English
  • At least B1-level proficiency in German
  • Knowledge of French is an advantage
  • Open to frequent travel (up to 60%, primarily between the Munich and Zurich areas)
Job Responsibility
Job Responsibility
  • Manufacturing process expert: Climeworks’ core expert in the process operation of novel manufacturing lines for sorbent filter production, during development, startup, and operation
  • Own all aspects of manufacturing process engineering to produce new sorbent filter material (working with manufacturing engineers and product owners): Understand process parameters & product impact
  • Evaluate and tune parameter ranges used in equipment purchases and in startup
  • Lead manufacturing process ramp-up, troubleshooting, and root cause analysis
  • Lead and own process FMEAs before, during, and after the startup phase
  • Ensure good documentation, training, and knowledge transfer
  • Cross-Functional Collaboration: Collaborate closely with internal experts in R&D, characterization/quality, product design, and sorbent/process development to ensure manufacturing process parameters lead to a guaranteed high-quality sorbent module product, and support the development of new testing methods
  • External partnerships & technical leadership: Act as a key technical expert in collaborations with external partners, ensuring DAC-specific requirements for sorbent filters manufacturing are met, including by being on-site to monitor operations when needed
  • Team player: Where needed, support lab-scale manufacturing in R&D, and new concept evaluation, for future-oriented DAC solutions
Read More
Arrow Right

Senior Mechanical Engineer: Test Development Engineering

As a Senior Mechanical Engineer in Test Development Engineering, you will play a...
Location
Location
United States , South Jordan, Utah
Salary
Salary:
Not provided
cricut.com Logo
Cricut
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering, Mechatronics, or a related field
  • 10+ years of experience in mechanical design, test and calibration equipment development, or precision metrology systems
  • Proficiency in CAD software (Creo, SolidWorks) and related engineering analysis tools (FEA, tolerance analysis)
  • Strong understanding of mechanical systems, pneumatic and electromechanical integration, and manufacturing processes
  • Deep knowledge of measurement science, tolerance analysis, and statistical methods for calibration and product qualification
  • Experience in test system design, metrology instrumentation, and mechanical calibration processes
  • Hands-on experience with mechanical test setups, data acquisition, and troubleshooting of measurement systems
  • Excellent analytical, problem-solving, and documentation skills
  • Strong communication skills and ability to lead cross-functional technical efforts
Job Responsibility
Job Responsibility
  • Conceptualize, design, and document assembly jigs, test fixtures, and precision metrology systems to support both production and validation testing
  • Develop custom calibration and test instruments, including mechanical, pneumatic, and electro-mechanical assemblies for high-accuracy measurements
  • Integrate sensors, load cells, displacement transducers, pressure gauges, and other instrumentation into test systems to support product calibration and verification
  • Collaborate with cross-functional teams (Design, Manufacturing, Quality, Calibration Labs, and Contract Manufacturers) to define test requirements and system capabilities
  • Utilize CAD software (Creo, SolidWorks) to create detailed 3D models and drawings of mechanical systems, with GD&T applied for precision alignment and repeatability
  • Generate and maintain Requirement Documents, Calibration Procedures, and Test System Specifications to ensure alignment between product and test design intent
  • Participate in supplier design reviews and qualification of external test and calibration equipment
  • Develop and validate test procedures, calibration methods, and verification plans for measurement systems and mechanical fixtures
  • Ensure measurement system analysis (MSA), gage R&R, and traceability to NIST or equivalent standards in all calibration processes
  • Conduct statistical evaluations of test data to assess system reliability, repeatability, and reproducibility
What we offer
What we offer
  • competitive Medical, Dental, and Vision coverage
  • 401(k) match
  • generous PTO
  • tuition reimbursement
  • yearly lifestyle stipend
  • exclusive employee discounts
  • Fulltime
Read More
Arrow Right

Senior Test Engineer, HW

We are looking for a Senior Test Engineer, HW to join our technology development...
Location
Location
Finland , Oulu
Salary
Salary:
Not provided
tactotek.com Logo
TactoTek
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BSc/MSc in Electrical Engineering, Electronics, or a related field
  • Several years of experience in hardware and/or environmental testing within R&D or technology development
  • Strong hands-on skills and ability to work independently with laboratory setups and test equipment
  • Solid analytical skills for interpreting test and build data and making fact-based conclusions
  • Practical experience in troubleshooting and failure analysis
  • Ability to plan and execute complex test campaigns and report results clearly
  • Good communication skills in English, both written and verbal
  • Systematic and detail-oriented way of working
Job Responsibility
Job Responsibility
  • Plan, execute, and document component-level and environmental tests for In-mold structural electronics
  • Design and maintain environmental test setups, including sample and fixture preparation, setup upkeep, and follow-up checks
  • Analyze and document environmental test results to support technology development and qualification
  • Prepare build materials, including control plans, stack structures, Kick-off materials, and ERP entries
  • Act as a gatekeeper to ensure that design and project samples are ready and qualified for testing
  • Provide build support, perform build result analysis, and conduct build failure investigations
  • Ensure that the minimum quality requirements for test environments are met and maintained
  • Analyze and interpret test data to identify trends, deviations, and root causes
  • Communicate findings clearly and propose actions to improve design robustness and manufacturability
  • Work closely with electronics, mechanics, materials, and process engineers to troubleshoot and solve technical issues
What we offer
What we offer
  • Competitive compensation package
  • Flexible work environment
  • Remote-friendly culture
  • Work-life balance
  • Opportunity to collaborate with world-leading IMSE experts and globally recognized brands
  • Employees are empowered to take responsibility for their work
  • Opportunity to actively shape the evolution of their role
  • Fulltime
Read More
Arrow Right

Senior Manufacturing Test Development Engineer

As a Senior Test Development Engineer, you will work closely with the WHOOP Manu...
Location
Location
United States , Boston
Salary
Salary:
130000.00 - 185000.00 USD / Year
whoop.com Logo
Whoop
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in computer science, electrical engineering, or related technical discipline
  • 4+ years of experience in software development
  • 4+ years of experience in embedded systems testing
  • Experience in deploying software in a production/manufacturing environment
  • Knowledge of object-oriented programming languages (e.g., C++, C#), scripting languages (e.g, Python)
  • Strong knowledge of QA methodologies, tools, and processes
  • Knowledge of using GIT
  • Experience of communication protocols such as UART, I2C, SPI, USB, BLE, etc.
  • Experience communicating with engineering, manufacturing, and external partners both domestically and internationally in a CM/JDM model
  • Ability to travel domestically and internationally (up to 15%)
Job Responsibility
Job Responsibility
  • Develop Automatic Test Equipment (ATE) test program to support manufacturing tests from engineering build to mass production
  • Writes engineering review proposals and contributes to technical design
  • Design and implement test/automation software used to qualify new features of embedded systems and firmware during engineering development and mass production
  • Create and maintain manufacturing test software requirements and specifications
  • Work with distributed teams across different time zones to achieve successful ATE bring up as well as issue resolution, production yield improvements, test process optimization
  • Perform root cause analysis, failure review, and data analytics to drive corrective actions for a wide variety of engineering and manufacturing test fixtures and processes
  • Coordinate parallel path efforts as contingency planning for high-risk milestones
  • Finds ways to help teammates achieve their goals. Inspires teamwork, can-do attitude, and positive energy
  • Able to voice concerns in a constructive manner
What we offer
What we offer
  • equity
  • benefits
  • Fulltime
Read More
Arrow Right

Senior Test Engineer, Propulsion

Archer is an aerospace company based in San Jose, California building an all-ele...
Location
Location
United States , San Jose
Salary
Salary:
134400.00 - 168000.00 USD / Year
archer.com Logo
Archer Aviation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor or MS degree in mechanical or mechatronics engineering
  • 2+ years of experience with physical testing and analysis of mechanical or electronic systems against detailed requirements
  • 2+ years of direct automation design and build experience (automated testing, manufacturing, robotics, industrial etc.)
  • Experience leading and driving technical projects to completion
  • Good understanding of electrical circuit design and power electronics
  • Experience with Python or NI(LabVIEW, TestStand, or VeriStand)
  • Experience with electrical test equipment, hand tools, power tools
Job Responsibility
Job Responsibility
  • Design and build reliable automated test equipment to conduct functional tests on PCBAs or modules
  • Work together with Design Engineers, System Engineers, and Reliability Engineers to Identify design critical operating modes and create design validation test plans
  • Work with test technicians to build validation test setups and execute test plans and teardowns
  • Investigate device failures to determine root cause and drive product improvements
  • Identify and plan critical tests to validate new technologies
  • Fulltime
Read More
Arrow Right

Senior Engineer, Equipment Engineering

Sandisk understands how people and businesses consume data and we relentlessly i...
Location
Location
Malaysia , Batu Kawan
Salary
Salary:
Not provided
sandisk.com Logo
Sandisk
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor of Engineering (Hons) in Electrical / Electronics/ Mechanical / Mechatronic
  • 3+ years of experience in test equipment engineering, specifically in SSD manufacturing or a related industry, with a strong emphasis on sustaining and maintenance
  • Proven track record of maintaining high slot-on availability and first pass yield in a high-volume production environment
  • Experience in utilizing data analytics for equipment monitoring, troubleshooting, and maintenance optimization
  • Expertise in maintaining and troubleshooting SSD test equipment, with a deep understanding of calibration, reliability, and maintenance protocols
  • Proficiency in data analysis tools (e.g., Python, R, SQL, MATLAB) for monitoring and optimizing equipment performance
  • Strong knowledge of predictive maintenance techniques, including AI-driven approaches to equipment reliability
  • Familiarity with SPC, DOE, and Six Sigma methodologies for continuous improvement
  • Strong leadership skills with the ability to mentor and guide junior engineers and technicians
  • Excellent problem-solving and decision-making abilities, with a focus on data-driven solutions
Job Responsibility
Job Responsibility
  • Ensure that test equipment is functioning optimally, achieving >99.3% slot-on availability and maintaining a high first pass yield
  • Perform routine maintenance, calibration, and troubleshooting of test systems to minimize downtime and ensure high reliability
  • Monitor real-time and historical data to detect issues, reduce failures, and maximize equipment uptime
  • Use data analytics to monitor test equipment performance, identify patterns, and anticipate potential issues before they impact production
  • Analyze test equipment data to improve test efficiency, reduce down times, and enhance tester performance
  • Implement real-time monitoring and diagnostic tools to ensure sustained optimal performance of test equipment
  • Analyze equipment performance data to optimize maintenance schedules and extend the life cycle of test equipment
  • Lead continuous improvement projects focused on sustaining and enhancing the efficiency and reliability of test equipment
  • Lead and mentor a team of engineers and technicians in sustaining tester, sharing best practices for maintenance and troubleshooting
  • Work closely with production, quality, and other cross-functional teams to ensure seamless operation and continuous improvement in testing
  • Fulltime
Read More
Arrow Right

Hybrid Cloud Engineering Ops – Supply Chain Senior Product Engineer

Senior Product engineer within the Supply chain/operations group working on Hybr...
Location
Location
Puerto Rico , Aguadilla
Salary
Salary:
Not provided
https://www.hpe.com/ Logo
Hewlett Packard Enterprise
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's or Master's degree in Electrical Engineering, Computer Engineering or equivalent
  • Typically 6-10 years experience in manufacturing, New Product Introduction (NPI) or product engineering
  • Strong leadership skills
  • Excellent analytical and problem solving skills
  • Experience in overall architecture/design of hardware/firmware/software for products and solutions
  • Experience with supply chain/operations new product setup and released product support
  • Excellent written and verbal communication skills
  • mastery in English and Spanish
  • Ability to effectively communicate complex technical issues suggesting proposals and negotiate options at senior management levels
Job Responsibility
Job Responsibility
  • Strong leader who can coordinate and direct SC engineering deliverables
  • Ensure all needed supply chain procedures, methods, bill of materials and tests are in place to deliver new Hybrid Clouds Products and solutions
  • Working with the program and manufacturing teams, ensure new Hybrid products are defined, setup and validated during the NPI process
  • Triage and drive root cause/corrective action of issues during a NPI program or during released product support
  • Establish program quality goals, track product quality during NPI and post CTR, drive needed quality improvement actions
  • During post release phase, track key data/metrics and resolve issues impacting orders and product performance
  • Working closely with R&D partners to drive design for manufacturability and test based on feedback from prior generation products and supply chain partners
  • Actively work with R&D partner groups on architectural improvements that will improve supply chains ability to deliver new Hybrid Cloud products
  • Working closely with mfg test partners, define test requirements that deliver an efficient test process with the appropriate amount of test coverage to meet the desired quality goals
  • Define requirements for the setup of product ordering tools and validate correct implementation of these requirements
What we offer
What we offer
  • Health & Wellbeing
  • Personal & Professional Development
  • Unconditional Inclusion
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy