Senior HVAC Controls Technician – Building Automation Job at Building Control Integrators (Columbus)

Senior Building Controls Service Technician

Provide effective service and repair for customer’s building automation system.

Location

United States , Columbus

Salary:

Not provided

Building Control Integrators

Expiration Date

Until further notice

Requirements

At least 2 years’ experience in building controls and automation, including Troubleshooting, diagnosis and repair of building management systems, plus exposure to programming
Proficiency and working knowledge of BACnet control systems and HVAC
Valid Drivers’ License issued by state of residence and in good standing

Job Responsibility

Providing timely responses to diagnose and repair source of customer concern by analyzing system requirements, test components and performing corrective action, including on-call, emergency and remote technical support as required
Performing inspections and preventive maintenance tasks for the control systems including point-to-point check-out, sensor calibration, and database back-up
Determining equipment needs and parts required for customer’s control system performance and proactively identify problems
Providing technical guidance to diagnose control systems concerns and ensure occupancy comfort
Ensuring proper set-points, schedules and sequences of operation are correctly programmed
Performing installations, start-ups & commissioning as needed
Promptly and accurately completing all required paperwork
Obtaining customer signature on all service work orders
Keeping service department supervisor informed of customer news, changes, or complaints
Providing Sales Team with leads

Fulltime

Senior HVAC Controls Technician – Building Automation

Senior HVAC Controls Technician – Building Automation role at BCI Controls, a le...

Location

United States , Cincinnati

Salary:

Not provided

Building Control Integrators

Expiration Date

Until further notice

Requirements

At least 5 years’ experience in building controls and automation, including project management
Experience with building automation systems programming
Working knowledge of BACnet control systems
Computer proficiency with MS Office
Valid Drivers’ License issued by state of residence and in good standing
Experience with Delta Controls and/or Niagara is a plus

Job Responsibility

Working with BCI partners as a Team Leader, to plan, facilitate and complete BAS installations for a wide variety of end users
Manage BAS projects to reflect our customer first philosophy while bringing projects in on budget
Manage field technician tasks, work with engineering and graphics departments to deliver the best project outcomes
Manage electrical installation by 3rd party installers
Work closely with owners, general contractors and mechanical contractors
Attend and manage regular project meetings
Responsible for all project BAS integration with front end interface, including 3rd party devices
Providing timely response to construction items: RFIs, change orders, schedule changes, etc
Verifying proper operation of all BAS items including database files, programs, sequences, and occupancy schedules
Ensuring proper Measurement and Verification (M&V) equipment functionality, including accurate data recording and storage

What we offer

Highly competitive pay
Medical
Dental
Optical
Car allowance
Gas card
Phone allowance
401K with company match
Quarterly profit sharing
Disability insurance

Fulltime

Senior Controls Technician

This role will be pivotal in leading the field delivery of building automation a...

Location

United States , Bend

Salary:

45.00 - 55.00 USD / Hour

CareerPaths NW

Expiration Date

Until further notice

Requirements

Strong hands-on experience in HVAC controls / BAS / DDC with installation, programming, and commissioning responsibility
Ability to interpret control drawings, wiring diagrams, submittals, and sequences of operation
Solid understanding of HVAC equipment and applications (AHUs, VAVs, hydronic systems, boilers/chillers, etc.)
Strong troubleshooting mindset and ability to own issues through resolution
Organized, detail-oriented, and able to manage multiple priorities in the field

Job Responsibility

Lead installation and termination of low-voltage controls wiring, controllers, sensors, actuators, and network components
Perform point-to-point checkout, functional testing, and system validation against sequences of operation
Commission integrated HVAC systems and optimize performance for comfort, efficiency, and reliability
Configure and program BAS/DDC systems to meet project sequences and customer requirements
Support system integrations and coordinate with stakeholders on communications (BACnet/IP, BACnet MS/TP, etc.) as needed
Support expansions, retrofits, and upgrades in existing buildings
Diagnose and resolve complex controls issues (logic, communications, devices, sensors, trending, alarms)
Provide clear documentation and recommendations to drive corrective action and long-term reliability
Communicate confidently with owners, facility teams, and contractors
deliver excellent follow-through

What we offer

medical and dental coverage
401k retirement plan
holiday, vacation and sick leave
short and long-term disability insurance
employee and dependent life insurance
employee assistance program for employee and dependents
transportation program
flexible spending program

Fulltime

Facility Control Center Manager

Amentum is looking for a Facility Control Center Manager to join our team! The F...

Location

United States , Fort Gordon, Georgia

Salary:

150000.00 - 200000.00 USD / Year

Amentum

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Mechanical/Electrical Engineering, Facility Management, or a related field (experience equivalent may be considered)
Five (5) or more years of experience in facilities management, building automation systems (BAS), or control room operations, with at least two (2) years of supervisory experience
Advanced knowledge of control and monitoring systems, including Building Automation Systems (BAS), SCADA, and alarm monitoring platforms
Strong understanding of critical building systems, including HVAC, fire suppression, electrical, and security systems
Familiarity with energy efficiency practices, system optimization, and preventative maintenance strategies
Proficiency in applicable safety codes and regulatory standards, such as NFPA, OSHA, and local building codes
Strong communication and leadership skills to manage teams, resolve conflicts, and coordinate with stakeholders
Analytical and problem-solving skills, with proficiency in diagnosing system issues and implementing solutions
Proficiency with office software suites (e.g., Microsoft Excel, Word, and PowerPoint) and database management tools
TS/SCI with Poly (if required)

Job Responsibility

Supervise the operation of centralized control systems that monitor HVAC, electrical, fire suppression, security, and other critical facility systems
Develop and implement standard operating procedures (SOPs) to ensure efficient and effective control room operations
Establish protocols for responding to alarms, emergencies, and system anomalies, ensuring rapid resolution in coordination with facility teams
Manage and mentor a team of control center operators and technicians, providing training, guidance, and performance evaluations
Assign and oversee daily tasks, schedules, and shift coverage to ensure 24/7 operational readiness
Promote a culture of accountability and continuous improvement within the control center team
Oversee the continuous monitoring of facility systems via the Building Automation System (BAS) or other platforms to proactively identify and resolve issues
Ensure that all system alarms, trends, and irregularities are escalated appropriately and documented accurately
Prepare and deliver daily, weekly, and monthly reports on system performance, incidents, and operational metrics
Act as the lead point of contact during system failures, critical incidents, or emergency situations within the facility

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

New

Mechanical Inspector 2

Under the supervision of the Senior Superintendent, performs inspection work of ...

Location

United States , La Jolla

Salary:

85000.00 - 115000.00 USD / Year

UC San Diego

Expiration Date

Until further notice

Requirements

Journey level skill through demonstrated experience in one or more of the following trades: Mechanical (HVAC, AC/R&H), Electrical, and/or Plumbing
Experience working in the areas of building automation and mechanical systems as they relate to electric, electronic, pneumatic and digitally controlled Building Automation Systems which manage complex HVAC systems in support of critical research, vivariums, cold rooms, High Containment laboratories, and server rooms. These systems include but are not limited to: Variable Air Volume (VAV) systems, Chilled water control, heating hot water control, Damper control, exhaust fan control, Fire Life Safety Systems, lighting control systems, heat exchangers, air compressors, vacuum pumps, fire sprinklers, and fire alarm systems
Working knowledge of California Building Codes, Cal / OSHA, and the campus, medical center or University Construction Design Standards. Knowledge of architectural or engineering concepts
Ability to read and interpret blueprints, sketches, wiring diagrams, ladder logic diagrams, system diagrams, isometric drawings, sequence of operation flow charts, schematics, plans, specifications, CAD drawings, and technical, verbal or written instruction and guidance by trade practices, manufacturer or underwriter specifications
Knowledge / skills in providing plan review services on basic improvement projects as well as code applications for replacement, repairs and upgrades of facilities or systems
Skills in reviewing and auditing, project completeness as applied to application for progress payments submitted by contractors
Good knowledge of the campus, including its infrastructure and applicable rules, regulations, policies and practices
Demonstrated verbal and interpersonal communications skills including skill to work effectively with a variety of constituents
Organizational and analytical skills, including skill in problem recognition, avoidance and resolution
Experience coordinating utility shutdowns in a large-scale commercial facilities environment to minimize disruption to building occupants

Job Responsibility

Under the supervision of the Senior Superintendent, performs inspection work of moderate difficulty or assists senior Construction Inspectors or a subsection of a larger construction project
Reviews design development and construction documents, specifications, and bid documents for construction features prior to release for bid
participates in final inspection and acceptance procedures
Demonstrates good judgment in selecting methods and techniques for obtaining solutions and ensuring compliance with all applicable building codes, rules, regulations, laws, etc
Inspect and verify that all mechanical project work operates according to design intent and project specifications, university specifications, common maintainability standards, and all applicable codes and standards
Identify deficiencies and make recommendations for necessary repairs or replacements
Conduct inspections of existing systems in accordance with government and UC regulations for operations
Provides facility condition assessments to maintain and improve the campus iCamp data in support of the Building Operations shops and the deferred maintenance program
Ensures that the iCamp data is accurate and reflects the facility conditions experienced by the Building Operations maintenance technicians
Provides management, analytical, and maintenance management system of record support for the preventative maintenance program

Fulltime

Senior BAS Service Technician

We are seeking an experienced Senior BAS Service Technician to support enterpris...

Location

United States , Tampa

Salary:

Not provided

Darwin Recruitment GmbH

Expiration Date

Until further notice

Requirements

Tritium Niagara Certification (active or previously held)
Strong BAS service and diagnostics background
Proven experience supporting at least one major controls platform, such as: JCI / FX, Distech, Trane
Experience working with Niagara as an aggregation and front-end platform
Ability to troubleshoot multi-vendor BAS environments
Strong understanding of HVAC systems and control sequences
Comfortable working in a desk-based, remote support role
Fluent in English (Spanish not required)

Job Responsibility

Provide remote service, diagnostics, and troubleshooting for building automation systems across multiple sites
Respond to hot and cold service calls from a centralized Energy Management Office
Analyze BAS alarms, trends, and performance issues using a Niagara front-end platform
Support and troubleshoot systems from multiple controls manufacturers, including: JCI / FX, Distech, Trane, Other major BAS platforms
Perform system-level diagnostics related to: HVAC control logic, Network communication issues, Controller performance, Sensor and point anomalies
Coordinate with internal teams or field personnel when on-site intervention is required
Document findings, resolutions, and recommendations clearly and accurately
Maintain consistent service quality while managing multiple concurrent issues

What we offer

Potential conversion to full-time (FTE) for strong performers

Fulltime

New

Electrical Inspector 2

Under the supervision of the Senior Superintendent, performs inspection work of ...

Location

United States , La Jolla

Salary:

85000.00 - 115000.00 USD / Year

UC San Diego

Expiration Date

May 13, 2026

Requirements

Bachelor's degree in related area and / or equivalent experience / training
Journey level skill through demonstrated experience in the Electrical Trade
Experience working in the areas of building and electrical systems as they relate chilled water systems, sea water life support systems, compressed air and vacuum systems, HVAC control (electronic and pneumatic) systems, emergency generators, signal lighting systems, fire alarm systems, main electrical systems, main breakers, motor control centers, main distribution panels, emergency power systems, all building wiring, conduit, electrical switches and outlets, street and walkway lighting, parking garage lighting, and conveyance systems
Working knowledge of California Building Codes, Cal / OSHA, and the campus, medical center or University Construction Design Standards
Knowledge of architectural or engineering concepts
Ability to read and interpret blueprints, sketches, wiring diagrams, ladder logic diagrams, system diagrams, isometric drawings, sequence of operation flow charts, schematics, plans, specifications, CAD drawings, and technical, verbal or written instruction and guidance by trade practices, manufacturer or underwriter specifications
Knowledge / skills in providing plan review services on basic improvement projects as well as code applications for replacement, repairs and upgrades of facilities or systems
Skills in reviewing and auditing, project completeness as applied to application for progress payments submitted by contractors
Good knowledge of the campus, including its infrastructure and applicable rules, regulations, policies and practices
Demonstrated verbal and interpersonal communications skills including skill to work effectively with a variety of constituents

Job Responsibility

Under the supervision of the Senior Superintendent, performs inspection work of moderate difficulty or assists senior Construction Inspectors or a subsection of a larger construction project
Reviews design development and construction documents, specifications, and bid documents for construction features prior to release for bid
and participates in final inspection and acceptance procedures
Demonstrates good judgment in selecting methods and techniques for obtaining solutions and ensuring compliance with all applicable building codes, rules, regulations, laws, etc
Inspect and verify that all electrical project work operates according to design intent, project specifications, and all applicable standards, codes, and maintainability requirements
Identify deficiencies and make recommendations for necessary repairs or replacements
Conduct inspections of existing systems in accordance with government and UC regulations for operations
Provides facility condition assessments to maintain and improve the campus iCamp data in support of the Building Operations shops and the deferred maintenance program
Ensures that the iCamp data is accurate and reflects the facility conditions experienced by the Building Operations maintenance technicians
Provides management, analytical, and maintenance management system of record support for the preventative maintenance program

Fulltime

!

New

Senior Technician, Instrumentation and Calibration

The Senior Facility Technician, Instrumentation and Calibration is a multi-disci...

Location

United States , Durham

Salary:

50.00 - 70.00 USD / Hour

Beam Therapeutics

Expiration Date

Until further notice

Requirements

Post-secondary degree, certification(s), or equivalent experience in a technical discipline related to MEP, construction, utilities, or trades
Supervisory experience with technicians &/or vendors preferred
8-10 years’ experience in calibration and maintenance with a preference for biotech, pharma, or medical device manufacturing
Working knowledge of process equipment, utility systems, and lab equipment
Computer systems literacy, with Siemens BAS, DeltaV, and CMMS experience required
Ability to manage competing priorities and timelines and adapt quickly to changing circumstances
Flexible and results oriented, with a focus on excellent customer service and demonstrated collaboration in a team environment
Must be able to work onsite daily and willing to have a flexible schedule during peak times, which may include supporting critical operations outside of normal work hours, as needed

Job Responsibility

Extensive experience with performing calibrations on Utility, Lab, and Process Equipment
Experience with the management of instrument standards
Drive change and champion continuous improvements by improving calibration procedures
Execute planned and demand maintenance activities for plant utilities (HVAC, Electrical, Chilled/Heating Hot Water, Compressed Air), gene therapy manufacturing equipment, and QC laboratory instrumentation
Support CapEx and Process Improvement project initiatives as required
Coordinate and schedule vendors for maintenance and calibration tasks
Respond and remediate alarms from the Building Automation and Process Control systems and site equipment
Create individual work and review vendor work within the site CMMS system
Ensure compliant operations in accordance with site cGMP, environmental, and government requirements
Ability to participate in on-call rotation with members of the Facility Maintenance team

Fulltime

Senior HVAC Controls Technician – Building Automation

Building Control Integrators

Location:
United States , Columbus

Category:
IT - Administration

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
December 06, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Senior HVAC Controls Technician – Building Automation

Senior Building Controls Service Technician