CrawlJobs Logo
STATSports Logo STATSports · IT - Software Development

Senior Hardware & Electronics Engineer

United Kingdom, Newry, County Down · Job Posted February 19, 2026
Apply Position
Job Link Share

Job Description

We’re looking for a Senior Electronic Engineer to join our product development team and play a key role in designing and delivering the next generation of STATSports hardware. This is a senior, end-to-end engineering role where you’ll take ownership of complex electronic designs from early concept through to factory NPI and certification. You’ll work across electronic hardware, embedded firmware, testing, and validation, collaborating closely with software, mechanical, systems, and manufacturing teams.

Job Responsibility

  • Contributing to new and existing product developments from concept through to implementation, including hardware design, firmware, testing, validation, and NPI
  • Driving circuit-level hardware design, including architecture, component selection, schematic capture, BoM generation, library management, PCB layout oversight, simulation, fabrication, prototyping, and board bring-up
  • Designing and integrating complex PCB and cable assemblies within constrained mechanical enclosures
  • Creating mechanical models of PCB designs and collaborating with mechanical designers to ensure correct fit and integration
  • Working closely with cross-functional teams to deliver projects on time and within budget across the full product lifecycle
  • Designing and interfacing hardware peripherals, including sensors, power management devices, communication interfaces, opto-electronics, actuators, microcontrollers, and FPGAs
  • Designing and working with AC/DC and DC/DC power conversion systems
  • Developing embedded firmware in C/C++ (Python experience an advantage) for ARM Cortex-based systems
  • Implementing and debugging communication protocols such as I2C, SPI, UART, CAN, and similar
  • Ensuring DFM/DFT considerations are applied throughout the electronic factory workflow
  • Designing test procedures, test rigs, and validation tools, and generating clear test reports
  • Supporting compliance and certification activities, including CE, EMC, FCC, FDA, and UL
  • Conducting and supporting EMC testing such as ESD, immunity, transient, conducted and radiated emissions
  • Applying tools such as FMEA to identify, analyse, and document system and component failures
  • Performing hands-on hardware and firmware debugging, including component replacement and fixture support
  • Participating in technical design reviews to ensure electrical integrity, safety, and quality
  • Supporting project planning, schedules, cost estimates, and delivery commitments in collaboration with the PMO
  • Actively contributing to quality improvements and adherence to the QA process

Requirements

  • Degree in Engineering (or equivalent)
  • 5+ years’ experience designing and testing analogue, digital, and mixed-signal electronics
  • Experience taking products from concept through to factory NPI using structured EDA workflows
  • Experienced with PCB design, component selection, sourcing, and DFM considerations
  • Strong embedded firmware knowledge and experience implementing algorithms in firmware
  • Comfortable working with ARM Cortex microcontrollers and common embedded protocols
  • Experience with compliance and certification testing
  • Confident using collaborative tools such as GIT, JIRA, or similar
  • Strong hands-on assembly and debug skills
  • Can manage technical complexity while balancing timelines, quality, and cost
  • Communicate clearly and work effectively within multidisciplinary teams

Nice to have

  • Experience in areas such as medical devices
  • Formal project management training
  • Advanced EMC testing
  • FPGA development
  • Consumer electronics at scale

What we offer

  • A senior role shaping hardware used by elite athletes worldwide
  • End-to-end ownership of product development, from concept to production
  • Collaboration with world-class engineers across hardware, firmware, software, mechanical design, and manufacturing
  • Exposure to cutting-edge wearable and sports technology
  • A culture that values innovation, quality, and engineering excellence
  • The opportunity to leave a lasting mark on products used at the highest level of sport
STATSports - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Senior Hardware & Electronics Engineer

8 matching positions

Senior Electronics Engineer, Hardware Development

We are seeking a highly skilled Senior Electronic Engineer to take full ownershi...
Location
Location
United States , Atlanta
Salary
Salary:
Not provided
tier4group.com Logo
Tier4 Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 5+ years of experience designing electronic circuits for IoT, access control, security, or building automation products
  • Bachelor’s degree in Electrical Engineering, Electronics, or a related technical field (or equivalent experience)
  • Strong hands-on experience with Altium or similar CAD tools for schematic capture, circuit simulation, and PCB layout
  • Ability to design for manufacturability (DFM) and ensure compliance with global regulatory and quality standards
  • Experience working with lab equipment such as oscilloscopes, spectrum analyzers, and network analyzers
  • Working knowledge of wireless technologies, including Bluetooth, Wi‑Fi, IoT RF systems, and antenna design
  • Ability to succeed in a fast-paced environment with minimal supervision
  • Excellent communication and interpersonal skills, with the ability to collaborate across functions and with external partners
Job Responsibility
Job Responsibility
  • Lead and own all electronic design work, ensuring high-quality output across the full product lifecycle
  • Partner with the Product team to define requirements, conduct feasibility studies, and estimate product costs
  • Create detailed project plans, timelines, and schedules for assigned design tasks and initiatives
  • Manage the full design process—from concept, simulation, prototyping, and validation to production handoff—ensuring designs are delivered on time, on budget, and to specification
  • Identify potential quality or technical risks early and develop mitigation strategies
  • Deliver measurable quality and reliability improvements through strong engineering discipline and continuous process enhancement
  • Collaborate effectively with cross-functional teams, including engineering, quality, supply chain, and external ODM/OEM partners
  • Stay current on emerging technologies relevant to IoT, wireless systems, access control, and building automation
  • Fulltime
Read More
Arrow Right

Senior Electronics Hardware Engineer

As a Senior Hardware Engineer, you will engage with an experienced cross-discipl...
Location
Location
New Zealand
Salary
Salary:
Not provided
herbrucks.com Logo
Herbruck Poultry Ranch
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Solid understanding of fundamental circuit design and discrete electronic components
  • Critical thinking and exceptional debugging and reasoning skills
  • Design and clear understanding of DC/DC switch mode power supplies and topologies
  • A good understanding of magnetic principles
  • Understanding of MCU, LCD, memories and sensor devices
  • EMC mitigation, cause and effect
  • Understanding of Wifi, BT, FPGA and touch screen technologies
  • Strong problem solving and debugging skills with a solid understanding of core engineering principles, and analytical techniques is required
  • Experience with high-speed interfaces (ADC/DAC, Gigabit Ethernet, HDMI, e/DP, USB3, PCIe, MIPI, SERDES)
  • Experience with DFx (Design for Cost, Test, Manufacturing)
Job Responsibility
Job Responsibility
  • Design world-class hardware, and, if applicable, software/firmware
  • Broad cross-functional engineering influence with an emphasis on delighting customers with innovation in the consumer electronics space
  • Complete technical ownership for the programs
  • Lead/participate in electronic hardware design reviews
  • Contribute to all aspects of technology readiness including manufacturability
  • Assist with technical Research and Proof of Concept phases
What we offer
What we offer
  • Competitive pension plan with company match
  • health benefits
  • paid time off
  • a robust Wellness Program
  • Fulltime
Read More
Arrow Right

Senior Space Electronics Hardware Engineer

Senior Electronics Hardware Engineer – Space (Berlin). Our client, a fast-growin...
Location
Location
Germany , Berlin
Salary
Salary:
Not provided
newspacetechnical.com Logo
NewSpace Technical
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BSc in Electrical Engineering with 7+ years experience (or MSc/PhD with 5+)
  • Experience with space hardware electrical design and qualification campaigns
  • Strong background in power and data systems
  • Experience with spacecraft C&DH, high-speed signalling, power electronics, EMC/EMI, and grounding
  • Ability to translate system requirements into robust electrical designs
Job Responsibility
Job Responsibility
  • Lead electrical, data, power, and avionics development for a space LiDAR payload
  • Adapt existing LEO LiDAR electrical designs for non-LEO missions
  • Design FPGA-based systems and associated peripherals (memory, ADC/DAC, transceivers)
  • Develop payload and LiDAR timing systems (laser/camera synchronisation and UTC)
  • Design power regulation and distribution architectures
  • Support flatsat and flight hardware build, test, and space qualification
  • Identify and mitigate electrical and radiation-related design risks
  • Produce requirements, test plans/reports, and design review material (PDR, CDR, etc.)
  • Fulltime
Read More
Arrow Right

Senior Hardware Engineer

We are seeking a Senior Hardware Engineer to join our DC Hardware team. In this ...
Location
Location
United States , North Reading
Salary
Salary:
186500.00 - 298500.00 USD / Year
teradyne.com Logo
Teradyne
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s or Master’s degree in Electrical Engineering or related field
  • 5–8+ years of experience in power electronics, high‑current power delivery, or instrumentation hardware design
  • Proven experience architecting and designing high‑current power delivery modules (mA to 100+ A)
  • Strong expertise in switching power supplies, multiphase regulators, linear regulators, and advanced power‑stage topologies
  • Experience designing fast‑response voltage/current sourcing circuits optimized for transient performance and dynamic load conditions
  • Deep understanding of power integrity and PDN optimization across full signal paths (instrumentation, cabling, loadboard, and DUT)
  • Experience modeling and mitigating droop, overshoot, ringing, and ground bounce under fast load conditions
  • Proficiency in simulation and analysis of loop stability, compensation networks, and transient response
  • Experience designing protection systems including OCP, OVP, OTP, short‑circuit protection, and fault isolation
  • Knowledge of reliability engineering, derating techniques, and thermal modeling for long‑term system stability
Job Responsibility
Job Responsibility
  • Design, develop, and validate high‑current, high‑power sourcing and switching hardware used in semiconductor automated test equipment (ATE)
  • Advance power delivery architecture, focusing on fast transient response, load regulation, protection systems, thermal management, and system‑level integration
  • Own power‑delivery modules from concept through production release
  • Collaborate closely with cross‑functional teams across hardware, firmware, mechanical, and test engineering to deliver robust, high‑performance solutions
What we offer
What we offer
  • Medical
  • dental
  • vision
  • Flexible Spending Accounts
  • retirement savings plans
  • life and disability insurance
  • paid vacation & holidays
  • tuition assistance programs
  • Fulltime
Read More
Arrow Right
New

Senior Hardware Engineer

Location
Location
United Kingdom , Aviemore
Salary
Salary:
60000.00 GBP / Year
zenovo.co.uk Logo
Zenovo
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree qualified in Electronic Engineering, Electrical Engineering or a closely related discipline
  • Experienced in Hardware product development
  • Strong background in electronic circuit design and schematic capture
  • Experience in taking products from prototype through to manufacture
  • Highly skilled in PCB layout principles and tools
  • Understanding of hardware debugging and fault finding
  • Ability to mentor and develop junior engineers
  • Excellent organisational skills with a proactive approach to problem solving.
Job Responsibility
Job Responsibility
  • Design and develop electronic hardware throughout the full product lifecycle
  • Produce circuit designs, schematic capture and PCB layouts
  • Develop prototypes and support product validation and testing
  • Take designs from prototype through to manufacture
  • Debug, fault-find and resolve hardware issues during development
  • Work closely with manufacturing to ensure successful product handover and production
  • Mentor and support graduate and junior engineers
  • Contribute to continuous improvement within the hardware engineering team
  • Support innovative product development in a collaborative engineering environment.
  • Fulltime
Read More
Arrow Right

Senior Hardware Engineer- Propulsion Controller

To achieve our vision of a world with Zero Crashes, Zero Emissions and Zero Cong...
Location
Location
United States , Milford
Salary
Salary:
Not provided
gm.com Logo
General Motors
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelors degree (or higher) in Electrical, Computer Engineering or equivalent
  • 5+ years of experience in electronic hardware design, with a strong focus on propulsion controller hardware design and automotive hardware electronics design
  • Experience in designing propulsion controller hardware and components, such as SoCs, MCUs, Ethernet Switches, PHY, CAN, power supply design, etc
  • Strong proficiency in circuit design, schematic creation, PCB layout, signal integrity and power integrity, and power management
  • Experience in design & analysis tools like: Mentor Graphics (schematic & layout), Ansys (signal integrity), Simplis (power integrity), Altair (EMC), Mathcad, PSpice & Saber
  • Proven ability of successfully launching build-to-print hardware into production
  • In-depth knowledge of requirements engineering process (FMEA, Preliminary Hazard Analyses)
  • In-depth knowledge of verification and validation processes
  • In-depth knowledge of embedded software development, testing and associated tools
  • Understanding of hardware design and failure mode
Job Responsibility
Job Responsibility
  • Design of propulsion controller electrical hardware: from schematic capture, worst case analysis, PCB layout, bring-up, debug, signal integrity and power integrity (SI/PI), design verification test (environmental and EMC), to manufacturing support and production launch
  • Design and development of the propulsion controller hardware (from concept design to launch) while meeting cost, timing, quality, and safety targets
  • Collaborate with cross-functional teams, such as software, mechanical, and manufacturing, to ensure seamless integration of the electrical design of the propulsion controller hardware
  • Work closely with contract manufacturing partners to ensure successful product build, from prototype through to mass production, while maintaining quality, cost, and timing targets
  • Electrical schematic design and PCB layout
  • Support new IC design/development strategic to new propulsion controller designs and architectures
  • Perform/support detailed hardware analysis – worst case analysis, thermal analysis, signal integrity, power integrity, etc
  • Execute bring-up of hardware design from power supplies, SoCs, MCUs, network devices, solenoid/valve control, instrumentation, etc
  • Lead design for manufacturing (DFM), design for assembly (DFA), and design for testing (DFT)
  • Drive the validation and testing of hardware components and systems, ensuring high levels of reliability and performance
What we offer
What we offer
  • This job may be eligible for relocation benefits
  • Fulltime
Read More
Arrow Right

Senior Hardware Engineer

We are seeking an experienced and talented Senior Hardware Engineer to be part o...
Location
Location
United States , Hoboken
Salary
Salary:
Not provided
Quantum Computing Inc.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor of Science (BS) in Electrical Engineering or Computer Engineering (EE or CE) from an accredited university
  • BS in EE or CE and 6+ years of experience or MS EE or CE with 4+ years of experience
  • Proven experience designing PCBs from schematic capture, layout design, and review
  • Experience with at least one ECAD suite (Altium, OrCAD, Allegro, CircuitMaker, or others) Altium is strongly preferred
  • Familiarity with PCB design best practices related to Signal Integrity, Power Integrity, and EMI/EMC compliance
  • Strong foundation in PCB design related to DFM, DFT, and DFA best practices
  • Strong electrical engineering fundamentals in Analog, Power, and Digital Electronics
  • Advanced experience with voltage regulators, LDO, and switch mode power supplies (SMPS)
  • Experience with analog electronics design (op-amps, TIAs, filters, etc.)
  • Experience with digital electronics design (Logic Gates, Flip Flops, Microcontrollers, RAM, ROM, Flash, etc.)
Job Responsibility
Job Responsibility
  • Support the development of several platforms based around classical and quantum photonics as a senior hardware engineer
  • Work alongside other hardware engineers to design custom electronics using Altium Designer
  • Evaluate critical component performance via board-level and system-level lab testing (ADCs, DACs, FPGAs, TDCs, etc.)
  • Work with firmware engineers, software engineers, and quantum scientists during various phases of lab testing
  • Work with contract manufacturers during manufacturing phases to procure custom electronics, addressing and mitigating any necessary design changes along the way
  • Validate the performance of custom electronics with lab testing
  • Document any issues uncovered during testing
  • Maintain documentation expected at milestone events during the entire design cycle (theory of operations, manufacturing documentation, validation testing results, etc.)
  • Integrate hardware into the complete system by working closely with mechanical, firmware, and FPGA engineers
  • Fulltime
Read More
Arrow Right

Senior Electronics Engineer

We are partnering with an innovative technology-led engineering company seeking ...
Location
Location
United Kingdom , Manchester
Salary
Salary:
Not provided
zenovo.co.uk Logo
Zenovo
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree qualified in Electronics Engineering or a related discipline
  • 5+ years’ experience in electronic design and/or hardware testing roles
  • Strong experience with schematic capture and PCB design tools (ideally Altium or similar)
  • Proficient with lab equipment such as oscilloscopes, logic analysers and signal generators, as well as measurement tools
  • Solid knowledge of analogue and digital electronics, embedded systems, signal integrity and thermal considerations
  • Understanding of compliance testing e.g. EMC and quality systems such as ISO9001
Job Responsibility
Job Responsibility
  • Lead electronic design activities including component selection, schematic capture, and PCB layout
  • Ensure designs are optimised for manufacture and test, while meeting relevant regulatory standards (CE / UKCA, EMC)
  • Develop and execute robust test strategies, procedures and setups for electronic assemblies and subsystems
  • Design and build bespoke test equipment and automation tools to support development and production
  • Investigate and resolve complex hardware issues, carrying out detailed root cause analysis
  • Work closely with suppliers to assess specifications, integration approaches, and quality requirements
  • Produce and maintain detailed technical documentation including specifications, test reports, and validation records
  • Provide guidance and mentoring to junior engineers and technicians
  • Fulltime
Read More
Arrow Right