CrawlJobs Logo
ICEYE Logo ICEYE · Manufacturing

Senior Fabrication and Integration Technician

Spain, Valencia · Job Posted January 13, 2026
Apply Position
Job Link Share

Job Description

ICEYE is looking for a Senior Fabrication and Integration Technician to join our High Altitude Pseudosatelite (HAPS) team tasked with the development of an unmanned, stratospheric electric aircraft. You will be responsible for activities ranging from fabrication and assembly of composite carbon fiber parts (CFRP), metallic structures, cabling harness and battery pack integration, as well as for the installation of avionic subsystems and end-to-end ground testing of individual subsystems of the aircraft. The work will involve collaborating with engineering in transitioning new systems from engineering to test-builds and mature assembly and testing techniques, looking for areas of optimization and improvement. Additionally, you’ll get to participate in manufacturing assembly and infrastructure improvements, building of test jigs, and more. You’ll be part of a small, dedicated team facing an exciting challenge. You will get to work with a world-class team on a project that has real impact and will set a new mark in aviation history. You will get to enjoy a transparent, open, and inclusive work culture. This is the beginning of a team that’s growing fast. Thus, it offers substantial growth opportunities.

Job Responsibility

  • Assembly of a large, but very lightweight aircraft
  • Fabrication of lightweight aircraft structures/components
  • Development of new assembly, integration and testing processes, and tools for an ultra-light UAV
  • Manufacturing of electronics assemblies and sub-level components (such as cable harness manufacturing and battery manufacturing of state-of-the-art high power density batteries)
  • Design and assembly of electrical and mechanical test jigs to support R&D
  • Developing and executing test procedures
  • Transitioning new designs from engineering to manufacturing

Requirements

  • 5+ years of relevant experience as a composite manufacturing technician with a hands on approach
  • Hands-on experience in aircraft, robot, race car or similar system prototyping & manufacturing
  • Good systems and physics understanding
  • Basic knowledge of CAD tools
  • Experience developing process improvements and setups to improve cycle times, repeatability, and maturity
  • Good command of the English language, both oral and written

Nice to have

  • Experience with electronics
  • Experience with mechanical prototyping (3D printing, using basic mechanical workshop equipment)
  • Experience with ultra low weight fibers/prepregs
  • Experience with welding (multi material)
  • Hands-on experience with unnamed aircraft operations/testing
  • Experience working with electronic equipment (prototype boards, harness, test setups)
  • Basic programming or data skills (C/Python/SQL/Excel)
  • Proactive, can-do attitude
  • Curiosity and passion about technology

What we offer

  • ICEYE offers amazing relocation packages to Valencia, Spain
  • A job that matters in a dynamic Earth Observation environment with a scale-up approach
  • An independent role with a supportive and diverse work environment
  • Time for self-development, research, training, conferences, or certification schemes
  • Health insurance
  • Coffee, snacks, and sweets to accompany your daily space mission
  • Creative, inspiring and collaborative office
  • Competitive salary contingent on your experience level, and will be negotiated individually
ICEYE - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Senior Fabrication and Integration Technician

8 matching positions

Senior Product Test Technician

ICON is seeking a Senior Product Test Technician to lead the operation, troubles...
Location
Location
United States , Austin
Salary
Salary:
Not provided
iconbuild.com Logo
ICON
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or equivalent required
  • Associate’s degree in mechatronics, mechanical engineering technology, or a relevant technical field preferred
  • 5+ years of hands-on technical experience in a relevant field (mechanical/electrical technician, mechanic, electrician, aerospace, construction, military/defense, or similar)
  • Proven expertise in troubleshooting complex mechanical, electrical, and fluid systems
  • Skilled in fabrication techniques including welding (AC aluminum, DC steel), machining, assembly, and operation of standard shop tools (torque wrenches, drills, fasteners, gear chains)
  • Experience with pumps, AC motors, gears, air compressors, pressure vessels, and lifting equipment
  • Familiarity with PLC systems and electro-mechanical controls (Beckhoff Twincat experience a plus)
  • Strong cross-team communication skills, with ability to mentor peers and junior staff
  • Ability to lift 50 pounds unassisted
  • Comfortable working in both lab and field conditions, including extreme environments (heat >100°F, cold/freezing temps, sun, rain, mud, dust, and limited utilities)
Job Responsibility
Job Responsibility
  • Lead operation, optimization, and troubleshooting of ICON’s test infrastructure, including mechanical, electrical, and fluid systems (pumps, valves, compressed air, motors, actuators, etc.)
  • Fabricate and integrate complex test articles, equipment, and assemblies (fluid panels, welded structures, harnesses, electrical cabinets, PLCs, and circuit breakers)
  • Support the design and build of test stands and infrastructure
  • document processes and recommend system-level improvements
  • Operate Vulcan and Magma 3D printing systems to support product testing and validation
  • Mentor and coach junior technicians, promoting adherence to safety, SOPs, and quality standards
  • Work cross-functionally with engineering teams to collect test data, produce reports, and recommend design or system upgrades
  • Perform preventive maintenance and coordinate repairs on test infrastructure to ensure system reliability
  • Contribute to continuous improvement of testing methods, fabrication processes, and test infrastructure
Read More
Arrow Right

Senior Hardware R&D Technician - AV Labs

Uber is launching AV Labs to accelerate the autonomous technology ecosystem. We'...
Location
Location
United States , Sunnyvale
Salary
Salary:
167000.00 - 185500.00 USD / Year
uber.com Logo
Uber
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • PCBA Rework & Soldering: 3+ years of hands-on experience in an electronics R&D lab or manufacturing environment, demonstrating advanced micro-soldering skills for intricate PCBA rework and fine-pitch surface mount technology (SMT)
  • Wire Harness Fabrication: Proven ability to confidently read and interpret electrical schematics and wiring diagrams to build, crimp, splice, and terminate custom wire harnesses
  • Lab Equipment & Troubleshooting: Proficiency using standard benchtop testing and diagnostic equipment (such as multimeters, oscilloscopes, and power supplies) to assist engineers with board bring-up and debugging
Job Responsibility
Job Responsibility
  • Execute PCBA Modifications & Assembly: Perform high-precision micro-soldering, component swaps, and complex SMT rework on prototype circuit boards to support rapid design iterations and bug fixes
  • Fabricate & Route Custom Harnesses: Build, crimp, and terminate intricate wire harnesses and cable assemblies from scratch using electrical schematics, and seamlessly integrate them into prototype vehicles and hardware-in-the-loop (HIL) test rigs
  • Collaborate on Testing & Debugging: Work alongside hardware and electrical engineers during initial board bring-up, utilizing benchtop equipment like multimeters, oscilloscopes, and power supplies to trace signals and troubleshoot hardware faults
  • Provide Engineering Feedback & Lab Support: Document physical assembly challenges, offer practical Design for Manufacturability (DFM) feedback to improve future iterations, and help maintain an organized, efficient, and fully stocked R&D lab environment
What we offer
What we offer
  • Equity award
  • 401(k) plan
  • Bonus program
  • Various benefits
  • Fulltime
Read More
Arrow Right

Senior Process Engineer - Optical Fabrication

ASML Wilton is seeking a Senior Process Engineer to join the Optical Fabrication...
Location
Location
United States , Wilton
Salary
Salary:
Not provided
asml.com Logo
ASML
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS, MS, or PhD in Mechanical, Optical, Materials, or related engineering field
  • Minimum 5 years of experience in optical fabrication, precision machining, grinding, or polishing
  • Experience in grinding mechanics, polishing processes, metrology interpretation, and process development
  • Demonstrated ability in structured problem solving, data analysis, RCA, and process improvement
  • Strong understanding of grinding and polishing mechanics and material removal behavior
  • Proficiency with interferometry, profilometry, and surface inspection tools
  • Experience using JMP, Minitab, or equivalent statistical software
  • Strong communication, cross functional collaboration, and leadership in a production environment
  • Ability to manage multiple priorities under time sensitive conditions
  • Demonstrated capability in 6P readiness, structured RCA, and verification driven corrective action
Job Responsibility
Job Responsibility
  • Defining and optimizing process parameters
  • Ensuring removal rate stability
  • Selecting consumables
  • Understanding machine behavior
  • Managing polishing performance, conditioning strategies, coolant control, and subsurface damage removal
  • Ensuring consistent behavior across tools and shifts
  • Includes control of pitch and pad behavior, slurry delivery, plate geometry, pressure and weight control, and other factors influencing removal rate, figure, roughness, and defectivity
  • Lead the introduction and qualification of new pad materials, slurry chemistries, pitch recipes, and machine upgrades
  • Convert interferometry, profilometry, and surface inspection data into actionable decisions
  • Establishing strong process control: defining process windows, capability targets, and long-term monitoring systems
  • Fulltime
Read More
Arrow Right
New

Senior Engineer, Electrical Design

The Senior Engineer, Electrical Design is responsible for designing, developing,...
Location
Location
United States , Round Lake
Salary
Salary:
96000.00 - 132000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS in Electrical or Automation Engineering with minimum 3 years of relevant experience in electrical or controls design
  • Experience working in or supporting a dynamic manufacturing environment, preferably in the healthcare or pharmaceutical automation sector
  • Hands‑on experience in electrical, controls, and pneumatic system design for modern automated manufacturing equipment
  • Proficiency with electrical design software, preferably Eplan, SolidWorks Electrical, or Spac
  • Demonstrated ability to create detailed and compliant electrical drawing documentation using ISO and ANSI standards
  • Familiarity with machine safety norms and standards, such as ISO 12100, ISO 13849, and IEC 62061
  • Strong knowledge of core engineering principles, with emphasis on electrical and controls engineering for automated manufacturing equipment
  • Ability to develop detailed, industry‑compliant electrical drawings and interpret technical documentation, including schematics, manuals, and component specifications
  • Skilled in analyzing electrical and pneumatic system designs to identify improvements, innovations, and cost‑reduction opportunities
  • Basic understanding of PLC architectures, HMI/SCADA systems, and industrial communication networks, such as Ethernet/IP, Profinet, and Modbus TCP
Job Responsibility
Job Responsibility
  • Lead the electrical design for custom automation equipment, collaborating with a cross‑functional team to ensure successful system development, fabrication, assembly, and functionality
  • Work with design engineering, technicians, plant personnel, and external vendors to support equipment design, component integration, and problem resolution during development and manufacturing
  • Develop and maintain electrical documentation, including new and modified electrical drawings, bills of materials, and integration of purchased components in accordance with industry standards
  • Provide technical support and continuous improvement of electrical systems, cabling, and testing equipment, ensuring reliable and optimized machine performance
  • Support safety and compliance activities, including machine risk assessments, preparation of required documentation, and execution of Machine Safety checks
  • ensure all designs adhere to NEC, UL, and other applicable codes and regulations
  • Assist during debugging, commissioning, and validation of automation equipment, contributing to process optimization and readiness for deployment
  • Contribute to project cost estimating and scheduling, and support Project Managers by providing technical feedback to help maintain timelines and approved budgets
  • Provide indirect supervision and technical guidance, including requisitioning components, documenting designs, and participating in training activities
  • up to 20% travel may be required domestically and internationally
What we offer
What we offer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • Fulltime
Read More
Arrow Right

Senior Engineer, Electrical Design

The Senior Engineer, Electrical Design is responsible for designing, developing,...
Location
Location
United States , Round Lake
Salary
Salary:
96000.00 - 132000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS in Electrical or Automation Engineering with minimum 3 years of relevant experience in electrical or controls design
  • Experience working in or supporting a dynamic manufacturing environment, preferably in the healthcare or pharmaceutical automation sector
  • Hands‑on experience in electrical, controls, and pneumatic system design for modern automated manufacturing equipment
  • Proficiency with electrical design software, preferably Eplan, SolidWorks Electrical, or Spac
  • Demonstrated ability to create detailed and compliant electrical drawing documentation using ISO and ANSI standards
  • Familiarity with machine safety norms and standards, such as ISO 12100, ISO 13849, and IEC 62061
  • Strong knowledge of core engineering principles, with emphasis on electrical and controls engineering for automated manufacturing equipment
  • Ability to develop detailed, industry‑compliant electrical drawings and interpret technical documentation, including schematics, manuals, and component specifications
  • Skilled in analyzing electrical and pneumatic system designs to identify improvements, innovations, and cost‑reduction opportunities
  • Basic understanding of PLC architectures, HMI/SCADA systems, and industrial communication networks, such as Ethernet/IP, Profinet, and Modbus TCP
Job Responsibility
Job Responsibility
  • Lead the electrical design for custom automation equipment, collaborating with a cross‑functional team to ensure successful system development, fabrication, assembly, and functionality
  • Work with design engineering, technicians, plant personnel, and external vendors to support equipment design, component integration, and problem resolution during development and manufacturing
  • Develop and maintain electrical documentation, including new and modified electrical drawings, bills of materials, and integration of purchased components in accordance with industry standards
  • Provide technical support and continuous improvement of electrical systems, cabling, and testing equipment, ensuring reliable and optimized machine performance
  • Support safety and compliance activities, including machine risk assessments, preparation of required documentation, and execution of Machine Safety checks
  • ensure all designs adhere to NEC, UL, and other applicable codes and regulations
  • Assist during debugging, commissioning, and validation of automation equipment, contributing to process optimization and readiness for deployment
  • Contribute to project cost estimating and scheduling, and support Project Managers by providing technical feedback to help maintain timelines and approved budgets
  • Provide indirect supervision and technical guidance, including requisitioning components, documenting designs, and participating in training activities
What we offer
What we offer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • 2 Days a Year to Volunteer
  • Fulltime
Read More
Arrow Right
New

Senior Engineer, Electrical Design

The Senior Engineer, Electrical Design is responsible for designing, developing,...
Location
Location
United States , Round Lake
Salary
Salary:
96000.00 - 132000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS in Electrical or Automation Engineering with minimum 3 years of relevant experience in electrical or controls design
  • Experience working in or supporting a dynamic manufacturing environment, preferably in the healthcare or pharmaceutical automation sector
  • Hands‑on experience in electrical, controls, and pneumatic system design for modern automated manufacturing equipment
  • Proficiency with electrical design software, preferably Eplan, SolidWorks Electrical, or Spac
  • Demonstrated ability to create detailed and compliant electrical drawing documentation using ISO and ANSI standards
  • Familiarity with machine safety norms and standards, such as ISO 12100, ISO 13849, and IEC 62061
  • Strong knowledge of core engineering principles, with emphasis on electrical and controls engineering for automated manufacturing equipment
  • Ability to develop detailed, industry‑compliant electrical drawings and interpret technical documentation, including schematics, manuals, and component specifications
  • Skilled in analyzing electrical and pneumatic system designs to identify improvements, innovations, and cost‑reduction opportunities
  • Basic understanding of PLC architectures, HMI/SCADA systems, and industrial communication networks, such as Ethernet/IP, Profinet, and Modbus TCP
Job Responsibility
Job Responsibility
  • Lead the electrical design for custom automation equipment, collaborating with a cross‑functional team to ensure successful system development, fabrication, assembly, and functionality
  • Work with design engineering, technicians, plant personnel, and external vendors to support equipment design, component integration, and problem resolution during development and manufacturing
  • Develop and maintain electrical documentation, including new and modified electrical drawings, bills of materials, and integration of purchased components in accordance with industry standards
  • Provide technical support and continuous improvement of electrical systems, cabling, and testing equipment, ensuring reliable and optimized machine performance
  • Support safety and compliance activities, including machine risk assessments, preparation of required documentation, and execution of Machine Safety checks
  • ensure all designs adhere to NEC, UL, and other applicable codes and regulations
  • Assist during debugging, commissioning, and validation of automation equipment, contributing to process optimization and readiness for deployment
  • Contribute to project cost estimating and scheduling, and support Project Managers by providing technical feedback to help maintain timelines and approved budgets
  • Provide indirect supervision and technical guidance, including requisitioning components, documenting designs, and participating in training activities
  • up to 20% travel may be required domestically and internationally
What we offer
What we offer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Continuing Education/Professional Development
  • Employee Heath & Well-Being Benefits
  • 2 Days a Year to Volunteer
  • Support for Parents
  • Fulltime
Read More
Arrow Right

Senior Mechanical Design Engineer – Space Payloads

Our client, a growing NewSpace startup, is seeking a Senior Mechanical Design En...
Location
Location
Germany , Berlin
Salary
Salary:
Not provided
newspacetechnical.com Logo
NewSpace Technical
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BSc in Mechanical Engineering with 7+ years experience (or MSc/PhD with 5+)
  • Strong CAD experience (e.g. SolidWorks, CATIA, Fusion)
  • Experience with mechanical and opto-mechanical design for space applications
  • Experience leading or supporting space qualification campaigns
  • Knowledge of FEM, structural dynamics, resonant modes, lightweight structures, and thermal/mechanical deformation
  • Experience translating system-level requirements into mechanical designs
  • Familiarity with GD&T standards (e.g. ISO GPS)
  • Strong written and verbal communication skills in English
  • Fluency in English (C1 or higher)
  • Willingness to relocate to Berlin (EU work authorisation is a plus)
Job Responsibility
Job Responsibility
  • Lead mechanical and opto-mechanical design of a space payload from concept through detailed design, build, AIT, and deployment
  • Perform mechanical design, analysis, documentation, fabrication support, assembly, and qualification activities
  • Design structures such as optical benches, opto-mechanical assemblies, mechanisms, and electronics packaging (PCBs, connectors, harnessing) using CAD tools
  • Work hands-on with technicians during assembly, integration, and test
  • Lead vibration and acoustic qualification campaigns and support thermal-vacuum testing
  • Collaborate closely with cross-functional teams across systems, optics, thermal, and mission engineering
  • Develop and maintain mechanical documentation including architectures, ICDs, assembly procedures, and V&V plans
  • Interface with suppliers and external vendors for parts and manufacturing
  • Coordinate with spacecraft bus teams to ensure clean mechanical and structural interfaces
  • Prepare material for major design reviews (PDR, CDR, MRR, FRR) and provide RFP cost inputs
  • Fulltime
Read More
Arrow Right

Senior Mechanical Design Engineer – Space Payloads

Our client, a growing NewSpace startup, is seeking a Senior Mechanical Design En...
Location
Location
Germany , Berlin
Salary
Salary:
Not provided
newspacetechnical.com Logo
NewSpace Technical
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BSc in Mechanical Engineering with 7+ years experience (or MSc/PhD with 5+)
  • Strong CAD experience (e.g. SolidWorks, CATIA, Fusion)
  • Experience with mechanical and opto-mechanical design for space applications
  • Experience leading or supporting space qualification campaigns
  • Knowledge of FEM, structural dynamics, resonant modes, lightweight structures, and thermal/mechanical deformation
  • Experience translating system-level requirements into mechanical designs
  • Familiarity with GD&T standards (e.g. ISO GPS)
  • Strong written and verbal communication skills in English
  • Fluency in English (C1 or higher)
  • Willingness to relocate to Berlin (EU work authorisation is a plus)
Job Responsibility
Job Responsibility
  • Lead mechanical and opto-mechanical design of a space payload from concept through detailed design, build, AIT, and deployment
  • Perform mechanical design, analysis, documentation, fabrication support, assembly, and qualification activities
  • Design structures such as optical benches, opto-mechanical assemblies, mechanisms, and electronics packaging (PCBs, connectors, harnessing) using CAD tools
  • Work hands-on with technicians during assembly, integration, and test
  • Lead vibration and acoustic qualification campaigns and support thermal-vacuum testing
  • Collaborate closely with cross-functional teams across systems, optics, thermal, and mission engineering
  • Develop and maintain mechanical documentation including architectures, ICDs, assembly procedures, and V&V plans
  • Interface with suppliers and external vendors for parts and manufacturing
  • Coordinate with spacecraft bus teams to ensure clean mechanical and structural interfaces
  • Prepare material for major design reviews (PDR, CDR, MRR, FRR) and provide RFP cost inputs
  • Fulltime
Read More
Arrow Right