CrawlJobs Logo

Senior Construction Quality Inspector

amentum.com Logo

Amentum

Location Icon

Location:
United States , Idaho Falls

Category Icon
Category:
Construction

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

100000.00 - 135000.00 USD / Year
Save Job
Save Icon
Apply Position

Job Description:

Amentum has the need for a new Sr Construction Quality Inspector to join our team near Idaho Falls, ID. The successful candidate will perform oversight of inspections of various construction features. Evaluate subcontractor methods, workmanship, quality, and conformance with code and project specifications. Candidates will evaluate construction materials for quality and compliance with specifications, and perform related work such as data collection, report writing, record-keeping, and field and laboratory testing programs. Employees at this level typically work independently on assignments but are expected to provide daily quality reports and regularly communicate with subcontractor quality representatives and the Amentum Project Quality Assurance Manager.

Job Responsibility:

  • Perform oversight of inspections of various construction features
  • Evaluate subcontractor methods, workmanship, quality, and conformance with code and project specifications
  • Evaluate construction materials for quality and compliance with specifications
  • Perform related work such as data collection, report writing, record-keeping, and field and laboratory testing programs
  • Provide daily quality reports and regularly communicate with subcontractor quality representatives and the Amentum Project Quality Assurance Manager
  • Review plans, specifications, codes, shop drawings, submittals, procedures, reports, memos, status reports, subcontractor's minimum days, delay days, change order days and all correspondence between the independent testing agency, and the subcontractor
  • Inspect and oversee contractual field work
  • Interface with on-site engineers
  • Advise subcontractors of deviations and provide remediation recommendations
  • Oversight of activities affecting quality
  • Review and oversee placement of and inspections/tests of construction materials
  • Review reports of grades, dimensions, and elevations
  • Review and approve contractor and subcontractor submittals

Requirements:

  • 8 or more years of construction/industrial experience
  • Thorough knowledge of construction practices, techniques, materials and equipment
  • Thorough knowledge of engineering plans, specifications and drawings
  • Ability to read and interpret plans, specifications and drawings and to compare them with various aspects of construction in progress
  • Ability to establish and maintain effective working relationships with subcontractors and associates
  • Ability to effect satisfactory compliance with specifications and standards
  • Ability to maintain accurate records
  • USA citizenship is required for this role. No Dual citizens or foreign nationals can be considered for this role
  • High School Diploma or equivalent is required, college education is preferred
  • Experience with inspection is preferred
  • Must be able to walk across long distances over potential rough terrain
  • The ability to climb stairs and ladders to inspect work is also required
  • Exposure to weather elements while in the field is expected

Nice to have:

  • college education is preferred
  • Experience with inspection is preferred
What we offer:
  • Health, dental, and vision insurance
  • Paid time off and holidays
  • Retirement benefits (including 401(k) matching)
  • Educational reimbursement
  • Parental leave
  • Employee stock purchase plan
  • Tax-saving options
  • Disability and life insurance
  • Pet insurance

Additional Information:

Job Posted:
April 05, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Amentum - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon
PREMIUM
More languages and countries
+ Unlock 31694 hidden job offers
Languages
English Čeština Deutsch Ελληνικά Español Français +15
Countries
United States United Kingdom India Canada Australia +
See plans
Plans from $2.99 / month

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Senior Construction Quality Inspector

Senior Site Services Inspector

Are you looking for a role where your technical Joinery expertise makes a real i...
Location
Location
United Kingdom , Sheffield
Salary
Salary:
Not provided
jeld-wen.co.uk Logo
JELD-WEN UK
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • City & Guilds/NVQ/Diploma or equivalent in Joinery achieved through an apprenticeship
  • Previous Experience of working with Fire doors
  • Valid CSCS card or willingness to obtain prior to employment
  • Working knowledge of building and health & safety regulations
  • Leadership experience in leading cross-functional teams and mentoring direct reports
  • Full, clean UK driving licence
  • Flexible regarding working hours with early starts, late finishes, and overnight stays required
Job Responsibility
Job Responsibility
  • Conduct site visits to assess reported issues and provide technical support
  • Prepare detailed reports with recommendations for remedial actions, including materials, personnel, and safety considerations
  • Act as the voice of the customer in quality-related decisions
  • Translate customer feedback, complaints, and expectations into actionable quality improvements
  • Collaborate with the UK Quality and R&D teams to support continuous improvement and product development
  • Carry out surveys, inspections, and oversee installation and maintenance activities under BM TRADA certification
  • Complete annual audits and implement ongoing training requirements under BM TRADA schemes
  • Always operate with a safety-first mentality
  • Direct line manager for four direct reports, setting their objectives and managing their outputs as well as nurturing their development
  • Communicate effectively with customers regarding issues, solutions, and claim outcomes
What we offer
What we offer
  • 25 days holiday and 8 statutory bank holidays, with the opportunity to purchase up to 5 days
  • 7.5% pension
  • private health insurance
  • company car/van
  • opportunities to grow and develop your career
  • Fulltime
Read More
Arrow Right

Senior Subsea Pipeline Marine Inspector

Airswift are a Global Manpower Provider specializing in the Energy, Infrastructu...
Location
Location
Qatar , Doha
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in engineering discipline (Mechanical) with demonstrated knowledge and experience
  • CSWIP 3.4UC Underwater Inspection Controller (Ref. CSWIP Document No.CSWIP-DIV-7-95 – Part 2)
  • Current / valid BOSIET, TBOSIET, FOET or TFOET certificate (Ref. OPITO requirements), as applicable, in conjunction with an offshore medical certificate
  • Experience in conducting QMS audits and QA verification programs for various project phases (i.e., Engineering, Procurement, Construction and Installation (specifically, the Repair / Installation of pipelines and their associated infrastructure) would be preferable
  • At least six (6) years of working experience in Quality Assurance and Control (QA/QC) within the Oil and Gas industry (i.e., onshore and offshore)
  • Should have a proven history as a lead 3.4UC underwater inspection controller within demanding subsea/offshore projects
  • Subsea pipeline project experience is highly desired, with emphasis on pipeline operations, integrity assurance/non-destructive testing (NDT) and inspection, maintenance and/or design and construction
  • Familiarity with marine vessel operations and the organisational responsibility of the (i) Offshore Construction/Installation Manger, (ii) Vessel Master, (iii) Diving and ROV Supervisors, (iv) Client Representative(s), (v) Certifying Authorities, etc.
  • Knowledge and working experience of underwater inspection (UWI) in the form of visual inspection and non-destructive testing (NDT) conducted by means of the intervention of diver(s) and/or remotely operated vehicle (ROV) or crewed submersible (i.e., either as a practitioner and/or as the result of training or certification conforming to the requirements of CSWIP Document No. CSWIP-DIV-7-95 – Part 1 and 2)
  • With respect to UWI and other related activities, shall be familiar with (i) relevant subsea applied inspection systems, (ii) recording and processing of data, (iii) quality assurance (QA), (iv) inspection planning and briefing, (v) the capabilities and limitations of divers/ROV’s and submersibles, and (vi) the care and deployment of equipment
Job Responsibility
Job Responsibility
  • Ensure compliance with QatarEnergy LNG systems and processes, including the Project Management System. Engage contractors and applicable third-party organisations with a professional approach and maintain a good working level relationship
  • Have a knowledge of the front end engineering design (FEED) deliverables and engineering study reports to support the implementation of the Project Quality Plan (PQP) and associated Procedures
  • Review the project Scope of work, to determine the nature, extent, and frequency of quality verification activities
  • Monitor, evaluate and report the inspection and testing status of the pipeline repair activities
  • Maintain interface relationships with Subsea Pipeline Repair Installation, and Inspection Contractors (including nominated specialist third-party Contractor organisation(s)), and the applicable regulatory focal points
  • especially, those functioning offshore
  • Review Contractor’s and Vendor’s quality reports / deliverables, in line with the project quality requirements
  • In conjunction with the QA/QC delegation operating offshore, verify that the repair activities are in accordance with approved documented information (i.e. procedures, specifications, detailed methodologies, etc)
  • Support the underwater inspection (UWI) activities during the offshore / subsea repairs, by means of the development of job records, preparation of daily reports, review of diver commentary and transfer into the written form, interpretate ROV camera footage and transfer into the written form and be able to produce an oral commentary of the daily activities, as and when required
  • Monitor the technical inspections, verification, certification and acceptance by Specialist Third Party Inspection (TPI) Contractor, as applicable, and develop the final documentation for each offshore campaign (i.e., PL-49, PL-75, PL-610 and PL-811)
  • Fulltime
Read More
Arrow Right

Construction Inspector I

Construction Inspectors spend the majority of their time working on projects per...
Location
Location
United States , Abilene
Salary
Salary:
Not provided
terracon.com Logo
Terracon Consultants, Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or equivalent
  • Associates degree in Civil Engineering Technology or Construction Engineering Technology preferred
  • Minimum 2-4 years’ experience as an Engineering Technician or other applicable experience
  • 1 year experience in construction inspection preferred
  • Valid driver’s license with acceptable violation history
  • Successful completion of related internal safety certifications
  • At least one or more certifications in the following areas: NICET Level II certification in Construction Materials Testing (Asphalt, Concrete, Soils)
  • NICET Level II certification in Geotechnical (Construction, Laboratory, Exploration, Generalist)
  • ICC certification (Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel – Bolting, Structural Steel – Welding)
  • American Welding Society (AWS) Certified Welding Inspector (CWI)
Job Responsibility
Job Responsibility
  • Perform daily inspection of construction projects monitoring quality and adherence to building code requirements, construction drawings and project specifications
  • Inspections may cross multiple inspection disciplines or within a specified area of expertise including structural steel, concrete, masonry, fireproofing, etc
  • Inspection may include visual/physical inspection and field testing to verify conformance with the plans and specifications
  • Prepare inspection reports and provide written documentation of observations and testing of materials
  • Communicate findings to engineer or project manager and when requested collaborate with the project team on solutions to potential issues
  • Adhere to strict safety standards
  • Performs testing, observation, and inspection as directed in accordance with training and the specified procedures
  • Read and interpret construction drawings and specifications
  • Provides clear documentation of findings and results
  • Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager
What we offer
What we offer
  • Medical
  • dental
  • vision
  • life insurance
  • 401(k) plan
  • paid time off and holidays
  • education reimbursement
  • various bonus programs
  • Fulltime
Read More
Arrow Right

Senior Inspector

We are seeking a highly motivated individual to join our team as a full-time Sen...
Location
Location
United States , Reno
Salary
Salary:
35.75 - 47.00 USD / Hour
woodrodgers.com Logo
Wood Rodgers
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 5+ years of experience in quality control, construction materials testing, or related field
  • American Concrete Institute (ACI) Grade I certification
  • Nevada Alliance for Quality Transportation Construction (NAQTC) Sampling and Density certification
  • International Code Council (ICC) Certification(s)
  • Valid driver’s license and reliable transportation
  • Occupational Safety and Health Administration (OSHA) 10-hour Construction certification
  • Proficient in overseeing construction activities, conducting field tests, and preparing detailed reports
  • Familiar with the equipment, techniques, and protocols used in construction materials testing
  • Ability to work independently, manage time effectively and work in a team environment
  • Physically able to lift and carry up to 50 pounds and perform duties in outdoor weather conditions
Job Responsibility
Job Responsibility
  • Perform construction observation to ensure that work is being performed in accordance with approved plans and specifications
  • Conduct special inspections (reinforced concrete, prestressed concrete, masonry, etc.) and field-materials testing including soil compaction, concrete strength, and asphalt density testing
  • Record and document daily test results and observations and communicate findings with project management team
  • Prepare and organize test reports for different phases of the construction project
  • Maintain equipment and perform routine maintenance and calibration to ensure accurate readings
What we offer
What we offer
  • A Unique Culture: An engineering firm that doesn’t feel like one
  • Teamwork: experience what being a part of the Wood Rodgers family feels like
  • Learning + Development: Engage in leadership development programs and goal setting to unlock new possibilities for your career and life
  • Fulltime
Read More
Arrow Right

Senior Inspector

We are seeking a highly motivated individual to join our team as a full-time Sen...
Location
Location
United States , Reno
Salary
Salary:
35.75 - 47.00 USD / Hour
woodrodgers.com Logo
Wood Rodgers
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 5+ years of experience in quality control, construction materials testing, or related field
  • American Concrete Institute (ACI) Grade I certification
  • Nevada Alliance for Quality Transportation Construction (NAQTC) Sampling and Density certification
  • International Code Council (ICC) Certification(s)
  • Valid driver’s license and reliable transportation
  • Occupational Safety and Health Administration (OSHA) 10-hour Construction certification
  • Proficient in overseeing construction activities, conducting field tests, and preparing detailed reports
  • Familiar with the equipment, techniques, and protocols used in construction materials testing
  • Ability to work independently, manage time effectively and work in a team environment
  • Physically able to lift and carry up to 50 pounds and perform duties in outdoor weather conditions
Job Responsibility
Job Responsibility
  • Perform construction observation to ensure that work is being performed in accordance with approved plans and specifications
  • Conduct special inspections (reinforced concrete, prestressed concrete, masonry, etc.) and field-materials testing including soil compaction, concrete strength, and asphalt density testing
  • Record and document daily test results and observations and communicate findings with project management team
  • Prepare and organize test reports for different phases of the construction project
  • Maintain equipment and perform routine maintenance and calibration to ensure accurate readings
What we offer
What we offer
  • A Unique Culture
  • Teamwork
  • Learning + Development
  • leadership development programs
  • mentorship
  • Fulltime
Read More
Arrow Right

Mechanical Inspector 2

Under the supervision of the Senior Superintendent, performs inspection work of ...
Location
Location
United States , La Jolla
Salary
Salary:
85000.00 - 115000.00 USD / Year
ucsd.edu Logo
UC San Diego
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Journey level skill through demonstrated experience in one or more of the following trades: Mechanical (HVAC, AC/R&H), Electrical, and/or Plumbing
  • Experience working in the areas of building automation and mechanical systems as they relate to electric, electronic, pneumatic and digitally controlled Building Automation Systems which manage complex HVAC systems in support of critical research, vivariums, cold rooms, High Containment laboratories, and server rooms. These systems include but are not limited to: Variable Air Volume (VAV) systems, Chilled water control, heating hot water control, Damper control, exhaust fan control, Fire Life Safety Systems, lighting control systems, heat exchangers, air compressors, vacuum pumps, fire sprinklers, and fire alarm systems
  • Working knowledge of California Building Codes, Cal / OSHA, and the campus, medical center or University Construction Design Standards. Knowledge of architectural or engineering concepts
  • Ability to read and interpret blueprints, sketches, wiring diagrams, ladder logic diagrams, system diagrams, isometric drawings, sequence of operation flow charts, schematics, plans, specifications, CAD drawings, and technical, verbal or written instruction and guidance by trade practices, manufacturer or underwriter specifications
  • Knowledge / skills in providing plan review services on basic improvement projects as well as code applications for replacement, repairs and upgrades of facilities or systems
  • Skills in reviewing and auditing, project completeness as applied to application for progress payments submitted by contractors
  • Good knowledge of the campus, including its infrastructure and applicable rules, regulations, policies and practices
  • Demonstrated verbal and interpersonal communications skills including skill to work effectively with a variety of constituents
  • Organizational and analytical skills, including skill in problem recognition, avoidance and resolution
  • Experience coordinating utility shutdowns in a large-scale commercial facilities environment to minimize disruption to building occupants
Job Responsibility
Job Responsibility
  • Under the supervision of the Senior Superintendent, performs inspection work of moderate difficulty or assists senior Construction Inspectors or a subsection of a larger construction project
  • Reviews design development and construction documents, specifications, and bid documents for construction features prior to release for bid
  • participates in final inspection and acceptance procedures
  • Demonstrates good judgment in selecting methods and techniques for obtaining solutions and ensuring compliance with all applicable building codes, rules, regulations, laws, etc
  • Inspect and verify that all mechanical project work operates according to design intent and project specifications, university specifications, common maintainability standards, and all applicable codes and standards
  • Identify deficiencies and make recommendations for necessary repairs or replacements
  • Conduct inspections of existing systems in accordance with government and UC regulations for operations
  • Provides facility condition assessments to maintain and improve the campus iCamp data in support of the Building Operations shops and the deferred maintenance program
  • Ensures that the iCamp data is accurate and reflects the facility conditions experienced by the Building Operations maintenance technicians
  • Provides management, analytical, and maintenance management system of record support for the preventative maintenance program
  • Fulltime
Read More
Arrow Right

Qa/qc Coordinator

Location
Location
Qatar , Doha
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BSc degree or higher in Mechanical or Metallurgical Engineering from a recognized Engineering faculty
  • Valid CSWIP 3.2.1 or AWS Senior Welding Inspection Certificate (SCWI) with at least five years of post-certification experience
  • B Gas Grade 2 or NACE Level II Coating Inspector qualification is preferable
  • NDT Level II in RT, UT, PT & MT / NDT qualifications per ASNT or ISO requirements
  • Certified QMS Lead Auditor in accordance with ISO 9001:2015 with at least five years of auditing experience
  • Strong knowledge of international codes/standards: EN, ISO, API, ASME, ASTM
  • Good leadership and communication skills
  • Ability to work on projects in a complex, multicultural environment
  • Proficient in MS Office, database management, spreadsheets, and email communication
  • Minimum 15 years as QA/QC Coordinator or QA/QC Lead, leading multidiscipline QC inspector teams for inspection and testing activities on major oil and gas projects, including offshore process platforms, jackets, subsea pipelines, and all phases of manufacturing, fabrication, construction, and offshore installation
Job Responsibility
Job Responsibility
  • Report quality status daily to the Senior Quality Engineer
  • Supervise and coordinate all activities related to the Quality Management System during construction and installation phases
  • Ensure all works by contractors, subcontractors, vendors, manufacturers, service providers, and third-party inspectors comply with project specifications, corporate standards, international codes, and QA/QC requirements
  • Review technical and quality documents, ITPs, and QA/QC procedures in the document management system
  • Ensure approved QA/QC documents are implemented at worksite level, including quality plans, control procedures, ITPs, and inspection checklists
  • Lead and coordinate QC inspectors’ activities at fabrication sites, construction sites, and offshore installations
  • review inspection reports
  • Monitor contractor/vendor implementation of approved quality requirements and address deficiencies
  • Act as focal point for resolving shop/site-related quality control issues in consultation with senior quality management
  • Control and follow up on technical deviations, material substitutions, and changes to inspection/test requirements
Read More
Arrow Right
New

Dimension Inspector

Our Mission & Ambition are Shaping a World of Trust. A business to business to S...
Location
Location
Vietnam , Ba Ria - Vung Tau
Salary
Salary:
Not provided
bureauveritas.cz Logo
Bureau Veritas Certification CZ, s.r.o.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Must hold a degree of Engineer in Mechanical/Civil, Construction or Equivalent.
  • Familiar with Quality Assurance & Quality Control Systems.
  • Must hold Valid Certificates: total station dimension training certificate
  • Minimum of ten (10) years of professional working experience in the oil and gas industry, of which five (5) years of experience relevant to the role and responsibilities such as Dimension Inspector or Senior, etc.
  • Involved in at least three (3) WHP/CPP/LQP and Infield Pipelines as well as Engineering, Fabrication, Testing, Installation and Connection Support for both Contractors and Clients.
  • Strong knowledge of material, construction, techniques, and equipment.
  • Sound knowledge in and Conversant with International Codes and Standards such as AWS, ASME, BS EN, API, ASTM, DNV, NACE, ISO., etc.
  • Good sense of team spirit leadership, coordination and communication skills in multi-cultural environment.
  • Good computer skills (Auto CAD, PDF, Word, Excel, Power Point) and relevant software.
  • Good command in English (writing, listening and speaking)
Job Responsibility
Job Responsibility
  • Ensure implementation of the Company’s Quality Policies, Health and Safety and Environmental Policies, Procedures and Quality Plans is to comply.
  • Ensure that Project Quality specially dimension and tolerance to be implemented and complied with Specification, ITP, Procedures and National Regulation as well.
  • Assist and support Snr. Structural Inspector, Chief Inspector and QA/QC Lead to review and approve Contractor/Vendor’s fabrication Plan/Program and then monitor/witness activities to evaluate dimension and tolerance integrity, including interface from fabrication and installation are accurately.
  • Overall supervision and ensure that, all dimension tasks and other activities such as Material/Equipment inspection, Assembly, Welding of onshore fabrication, Load-out & Sea-fastening and offshore installation include HUC campaign that to be complied with latest AFC drawing, approved Procedure and Specification.
  • Under direction of Chief Inspector, QA/QC Lead and QA/QC Manager to support other Inspector on their role and performance (including Contractor Inspectors and Third-Party Inspectors).
  • Work closely with Contractor, Vendor to maintain the Project dimension tasks performance are within the KPI and ensure that all mating interfaces between fabrication and installation are accurately measurement.
  • Interface, Communicate and Maintain close liaison with other Project Disciplines, Contractor, Vendor, Third Party for all relevant Activities.
  • Participate in the issue of Site Issue and Non-conformance Report include Disposition or Corrective Action and Preventive Action.
  • Review and analyze relative construction documentation and other inspection reports to ensure accuracy, completeness, and compliance.
  • Maintains good relationships with Contractor and Vendor but being strict to achieve the Project objectives.
What we offer
What we offer
  • Inclusive
  • flexible
  • diverse company
  • Fulltime
Read More
Arrow Right