Senior Cabling Engineer Job at 360 Resourcing Solutions (Manchester)

Senior Cabling Engineer

As Senior Cabling Engineer you will be responsible for: Installation, preparatio...

Location

United Kingdom , Manchester

Salary:

Not provided

360 Resourcing Solutions

Expiration Date

Until further notice

Requirements

Significant experience in fusion splicing
Significant experience in copper termination
Significant experience in Fibre and copper cabling
Significant experience in PVC and Galvanized containment
Prior experience in cabling within the telecoms industry and within the MOJ industry (Courts & Prisons)
Good knowledge of industry standards
Prior experience of testing and fault-finding on all cable type

Job Responsibility

Installation, preparation, splicing and testing of singlemode and multimode optic fibre
Installation, termination and testing of category 6, UTP and STP coaxial, multi-core voice cables
Installation of cable containment, PVC and Galvanized
Survey all installations prior to work commencement
ensure and confirm that the work instructions include appropriate equipment and match customer requirements
Communicate with Service Desk/IT/Sales Support to clarify in case there is insufficient information or mismatch of details was identified
Perform cable moves and changes to existing systems as required following the instructions and best industry standards
Ensure that all Add/Moves/Changes (A/M/C) are approved, correctly recorded, labelled and reported to the line manager and Sales Support team
Test and label each installation complying with industry standards
Ensure that team members are following correct testing methods and procedures at any time, advise where necessary to ensure consistency across the team

What we offer

Generous holiday entitlement
Contributory pension scheme
Healthcare and wellbeing programmes
Professional development and training opportunities
Flexible working arrangements subject to business needs
Employee assistance programmes

Fulltime

EC&I Designer, Engineer, Senior Engineer, Principal Engineer

Step into a career-defining role with Actemium Design, specialists in engineerin...

Location

United Kingdom , Chorley and Whitehaven

Salary:

Not provided

VINCI Energies

Expiration Date

Until further notice

Requirements

Relevant engineering degree (e.g., electrical, electronic, control, instrumentation), HNC/HND, or equivalent professional experience in EC&I design/engineering
Solid understanding of CAD design, industrial electrical systems, instrumentation, and controls design
Experience producing and reviewing EC&I schematics, wiring diagrams, loop drawings, cable schedules, and panel layouts
Proficiency in relevant software (e.g., AutoCAD, EPLAN, Amtech/Trimble, or similar tools)
Knowledge of UK electrical standards and good practice
Proactive, organised, and adaptable approach with strong teamwork and communication skills
For senior/principal roles: proven ability to lead projects, mentor others, and act as technical authority on EC&I design solutions
Full UK driving licence or ability to travel to client sites as required

Job Responsibility

Develop, review, and improve Electrical, Control & Instrumentation (EC&I) designs for nuclear and non-nuclear projects
Carry out detailed engineering calculations, equipment sizing, instrument selection, and preparation of technical documentation (drawings, schedules, data sheets, specifications)
Collaborate with multi-disciplinary teams (mechanical, process, project management) to ensure seamless integration and delivery
Engage with clients, and site teams to clarify requirements, resolve technical queries, and drive engineering excellence
Mentor and support junior engineers/designers, championing knowledge-sharing and continuous improvement

What we offer

Competitive salary package depending on role and experience
Pension contributions
Discretionary annual bonus
Heath Shield plan
26 days holiday plus bank holidays
EV car scheme
Company share scheme (qualifying periods apply)
Death in service insurance
Hybrid and flexible working arrangements where applicable
Supported training

Fulltime

Senior Engineer (Power Engineer)

Brightspeed is seeking a Senior Engineer (Power Engineer) to design, implement, ...

Location

United States , Charlotte

Salary:

Not provided

Brightspeed

Expiration Date

Until further notice

Requirements

Ideal candidate located in the North region (WI, MI, IL, IN, OH, MO)
Associate degree or equivalent education in Electrical Engineering, Power Systems Engineering, or related field, or equivalent work experience
5+ years of experience designing DC power systems in telecommunications, engineering, network planning or equivalent
Strong knowledge of -48V DC systems, rectifiers, batteries, grounding, and bonding
Proficiency with one-line diagrams, load calculations, and design packages
Familiarity with Telcordia, NEC, OSHA, and industry best practices.
Knowledgeable and skilled in planning /engineering and reading technical construction drawings/documents
Understanding of transport and router equipment/technologies and protocols, along with layer 2 and layer 3 ethernet and transport networking
Product knowledge of Cisco and Nokia routers, Ciena and Fujitsu transport devices, Calix and Adtran access devices, localized power such as fuse panels and BDFB power bays, fiber management, and fiber optic modules
Knowledgeable and some experience in systems/tools such as SAP, IQGeo, CO Power Database, WMS, Service Now, Armor, One Control for Ciena 6500, Netsmart 1500 for Fujitsu, TNMS for Infinera, Smartsheet and Microsoft Office

Job Responsibility

Designing and reviewing DC power systems for Central Office and Core locations, including rectifiers, batteries, BDFB’s, PBD’s, distribution panels, inverters, automatic and manual generator transfer switches, grounding, fused, and unfused cabling)
Preparing and maintaining detailed engineering documentation—drawings, load calculations, and material specifications
Evaluating and standardizing power equipment and configurations for reliability and compliance
Collaborating with transport, OLT, and implementation teams to align project schedules
Supporting installation and commissioning of power systems, including site reviews, troubleshooting, and test verification
Ensuring adherence to Brightspeed standards, Telcordia GR-513, NEC, and applicable safety and compliance codes
Tracking power capacity, utilization, and redundancy to support network growth
Conducting preventive maintenance programs and power audits
Providing input to RFPs, vendor evaluations, and technology pilots for DC power modernization efforts
Conducting load analysis, redundancy planning, and capacity forecasting to meet future network demands as required to ensure sufficient backup power

What we offer

competitive medical, dental, vision, and life insurance
an employee assistance program
a 401K plan with company match and a host of voluntary benefits

Fulltime

Senior Engineer - SQA

Support global Supplier Quality Assurance (SQA) with the supplier selection and ...

Location

India , Chennai

Salary:

Not provided

Randstad

Expiration Date

July 19, 2026

Requirements

Technical background with a bachelor's or master's degree in Electrical engineering or similar, training as welding engineer preferably
Min 7 years of professional experience in comparable positions
Knowledge of quality management methods (e.g., Ishikawa, FMEA, 8D)
Training in quality management 9001,14001,45001 (e.g., TÜV, Bureau Veritas)
Convincing manner towards external and internal parties
Ability to work in teams and excellent communication skills
SAP and MS Office , Power BI skills preferably
Knowledge on APQP / APQP for Wind, QASL, LPA, FTR
Excellent English language skills
Willingness to travel

Job Responsibility

Support global Supplier Quality Assurance (SQA) with the supplier selection and qualification process for the material group Electrics (generator, Converter , Motors, Cables Etc...)
Assess and audit supplier and definition of actions (system, process , product and control plan )
Tracking of audit findings and evaluate the efficiency of actions
Planning supplier / product qualification and approval process for the material group Electricsl
Support and execution of prototype inspections and Planning SAT
Support and execution of first article inspections
Definition and tracking of actions for prototype and first article deviations
Effectively implemention supplier Quality transformation projects Ex QASL, LPA
Support nonconformity and claim process and agreement on actions with the supplier
Monitor supplier process control and supplier performance with the use of KPI´s

Fulltime

Senior Engineer Electrical

As part of interdisciplinary project teams, you will work on complex greenfield ...

Location

Switzerland , Basel

Salary:

Not provided

Exyte Central Europe GmbH

Expiration Date

Until further notice

Requirements

Degree or equivalent qualification in electrical engineering (e.g. Advanced Federal Diploma HF, BSc/MSc Electrical Engineering, certified electrical project manager, or similar)
Several years of experience in electrical engineering of medium and low voltage systems, ideally in the pharmaceutical, chemical, or life sciences industry
Knowledge of GMP environments and experience with qualification and documentation is an advantage
Experience in the following areas is considered a plus: Preparation of electrical schematics and equipment layouts
Electrical site supervision
Design and assessment of electrical systems, including hazardous (Ex) areas
Proficiency in CAE/CAD tools such as COMOS, EPLAN, or similar systems
Strong team player with a clear focus on customer satisfaction and high-quality project delivery
Excellent communication skills in German and English
Willingness to travel on a project basis (up to a radius of approx. 500 km)

Job Responsibility

Defining, clarifying, and documenting technical project requirements in electrical engineering (medium and low voltage), in compliance with national and international standards as well as GMP requirements
Planning and designing electrical systems, including cabling for automation and process control systems
Preparing project-specific design documentation (e.g. concepts, URS, FS, schematics, equipment lists, and circuit diagrams)
Developing planning documentation, bills of quantities, and technical tender documents
Evaluating technical bids and providing well-founded award recommendations
Acting as site supervisor for electrical engineering, including on-site assignments to monitor quality, schedule, cost, and scope
Supporting project management in scheduling, reporting, as well as contract and change management within the electrical discipline
Coordinating interfaces with production, utilities, infrastructure, and auxiliary systems, as well as internal and external stakeholders (clients, planners, suppliers)

Fulltime

Senior Engineer - IT Support

At 8x8, we’re not just building great communications technology - we’re reimagin...

Location

Singapore , Singapore

Salary:

Not provided

8x8

Expiration Date

Until further notice

Requirements

Bachelor's degree in Computer Science, Information Technology, or a related field
Must possess relevant experience in IT Support or IT Operations roles
Demonstrated enthusiasm for AI tools and a habit of applying them to real work - not just awareness of them
A mindset of curiosity: you read about what's changing in IT and AI, and you experiment
The ability to work and think independently, be a self-starter, take initiative, and be highly effective with or without detailed work direction is an absolute must
Must be able to work non-traditional work hours as needed (including from home over high-speed Internet (not provided)), and occasional off hours to control interruptions to critical services and minimize business impact
Ability to work in-person at the 8x8 Singapore location full-time (5 days per week) with flexibility to cover any of the 7 days of the week (1 George St, #22-03/04 One George Street, Singapore 049145)
Ability to (potentially frequently) lift and move equipment weighing throughout the office for various business needs
The person in this position needs to occasionally move about inside the office to access and deploy IT equipment to multiple office floors, and within various physical conditions and environments

Job Responsibility

Actively use AI tools (including 8x8's approved platforms: Airia, Google Gemini, Claude) to accelerate your own work - from drafting documentation to triaging incidents and analyzing patterns
Identify and implement AI-driven workflow automation opportunities across IT operations processes
Contribute ideas and build lightweight automations using tools like n8n, BetterCloud, and AI-native integrations to reduce manual toil
Advocate for AI-assisted approaches within the team, sharing what works and helping colleagues build their own AI fluency
Support PCs and Macs, managing laptop builds and lifecycle processes
Own, administer, and continuously improve our endpoint security platform stack - including MDM (mobile device management), BYOD/Work Application Isolation, DLP (data loss prevention), Data Containment, and Zero Trust access controls - serving as the team's primary SME across these domains
Support user onboarding/offboarding and productivity tooling, leveraging automation where possible
Staff our end-user IT Support walk-up desk - real-time triage, assistance, and issue remediation
Act as the primary platform owner for MDM - evaluating, deploying, and administering mobile device management tooling for both corporate-owned and BYOD endpoints across Windows, macOS, iOS, and Android
Own and operate BYOD and Work Application Isolation platforms (e.g. Venn Blue Border, Ivanti/MobileIron), defining policy, onboarding workflows, and data containment boundaries to enable secure access from unmanaged personal devices

Fulltime

Senior Engineer, Electrical Design

Being an Engineer at Baxter means you play a critical role in helping us achieve...

Location

United States , Round Lake

Salary:

96000.00 - 132000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

BS in Electrical or Automation Engineering with minimum 3 years of relevant experience in electrical or controls design
Experience working in or supporting a dynamic manufacturing environment, preferably in the healthcare or pharmaceutical automation sector
Hands‑on experience in electrical, controls, and pneumatic system design for modern automated manufacturing equipment
Proficiency with electrical design software, preferably Eplan, SolidWorks Electrical, or Spac
Demonstrated ability to create detailed and compliant electrical drawing documentation using ISO and ANSI standards
Familiarity with machine safety norms and standards, such as ISO 12100, ISO 13849, and IEC 62061
Strong knowledge of core engineering principles, with emphasis on electrical and controls engineering for automated manufacturing equipment
Ability to develop detailed, industry‑compliant electrical drawings and interpret technical documentation, including schematics, manuals, and component specifications
Skilled in analyzing electrical and pneumatic system designs to identify improvements, innovations, and cost‑reduction opportunities
Basic understanding of PLC architectures, HMI/SCADA systems, and industrial communication networks, such as Ethernet/IP, Profinet, and Modbus TCP

Job Responsibility

Lead the electrical design for custom automation equipment, collaborating with a cross‑functional team to ensure successful system development, fabrication, assembly, and functionality
Work with design engineering, technicians, plant personnel, and external vendors to support equipment design, component integration, and problem resolution during development and manufacturing
Develop and maintain electrical documentation, including new and modified electrical drawings, bills of materials, and integration of purchased components in accordance with industry standards
Provide technical support and continuous improvement of electrical systems, cabling, and testing equipment, ensuring reliable and optimized machine performance
Support safety and compliance activities, including machine risk assessments, preparation of required documentation, and execution of Machine Safety checks
ensure all designs adhere to NEC, UL, and other applicable codes and regulations
Assist during debugging, commissioning, and validation of automation equipment, contributing to process optimization and readiness for deployment
Contribute to project cost estimating and scheduling, and support Project Managers by providing technical feedback to help maintain timelines and approved budgets
Provide indirect supervision and technical guidance, including requisitioning components, documenting designs, and participating in training activities
up to 20% travel may be required domestically and internationally.

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
2 Days a Year to Volunteer

Fulltime

Senior Engineer, Electrical Design

The Senior Engineer, Electrical Design is responsible for designing, developing,...

Location

United States , Round Lake

Salary:

96000.00 - 132000.00 USD / Year

Baxter

Expiration Date

Until further notice

Requirements

BS in Electrical or Automation Engineering with minimum 3 years of relevant experience in electrical or controls design
Experience working in or supporting a dynamic manufacturing environment, preferably in the healthcare or pharmaceutical automation sector
Hands‑on experience in electrical, controls, and pneumatic system design for modern automated manufacturing equipment
Proficiency with electrical design software, preferably Eplan, SolidWorks Electrical, or Spac
Demonstrated ability to create detailed and compliant electrical drawing documentation using ISO and ANSI standards
Familiarity with machine safety norms and standards, such as ISO 12100, ISO 13849, and IEC 62061
Strong knowledge of core engineering principles, with emphasis on electrical and controls engineering for automated manufacturing equipment
Ability to develop detailed, industry‑compliant electrical drawings and interpret technical documentation, including schematics, manuals, and component specifications
Skilled in analyzing electrical and pneumatic system designs to identify improvements, innovations, and cost‑reduction opportunities
Basic understanding of PLC architectures, HMI/SCADA systems, and industrial communication networks, such as Ethernet/IP, Profinet, and Modbus TCP

Job Responsibility

Lead the electrical design for custom automation equipment, collaborating with a cross‑functional team to ensure successful system development, fabrication, assembly, and functionality
Work with design engineering, technicians, plant personnel, and external vendors to support equipment design, component integration, and problem resolution during development and manufacturing
Develop and maintain electrical documentation, including new and modified electrical drawings, bills of materials, and integration of purchased components in accordance with industry standards
Provide technical support and continuous improvement of electrical systems, cabling, and testing equipment, ensuring reliable and optimized machine performance
Support safety and compliance activities, including machine risk assessments, preparation of required documentation, and execution of Machine Safety checks
ensure all designs adhere to NEC, UL, and other applicable codes and regulations
Assist during debugging, commissioning, and validation of automation equipment, contributing to process optimization and readiness for deployment
Contribute to project cost estimating and scheduling, and support Project Managers by providing technical feedback to help maintain timelines and approved budgets
Provide indirect supervision and technical guidance, including requisitioning components, documenting designs, and participating in training activities

What we offer

Medical, Dental and Vision coverage
160 hours of Paid Time Off and Paid Holidays
401K match
Employee Stock Purchase Program
Paid Parental Leave
Tuition Reimbursement
Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
2 Days a Year to Volunteer

Fulltime

Select Country

Senior Cabling Engineer

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?

Senior Cabling Engineer

Senior Cabling Engineer

EC&I Designer, Engineer, Senior Engineer, Principal Engineer

Senior Engineer (Power Engineer)

Senior Engineer - SQA

Senior Engineer Electrical

Senior Engineer - IT Support

Senior Engineer, Electrical Design

Senior Engineer, Electrical Design

Our AI answers in your language