Secondary machining Job at Husco (Whitewater)

Maintenance Technician 3-shifts

As a Maintenance Technician in Sint-Niklaas, you will ensure that the production...

Location

Belgium , Saint-Nicolas

Salary:

Not provided

Randstad

Expiration Date

September 02, 2030

Requirements

You hold at least a secondary technical diploma in electricity and/or mechanics.
You can combine this diploma with a few years of experience as a maintenance and troubleshooting technician.
You have a good basic knowledge of PLC systems such as Siemens, Omron, or Beckhoff.
You already have experience in electricity, mechanics, and pneumatics.
You can read technical drawings.
You speak and write fluently in either Dutch OR English.
You are able to work in a 3-shift system.

Job Responsibility

You perform planned preventive maintenance to prevent breakdowns and ensure machines operate as efficiently as possible.
You quickly diagnose technical faults and repair them smoothly using diagrams and manuals.
You change over machines during product switches and adjust them precisely to guarantee the best quality.
You inspect and maintain systems for compressed air, heating, lighting, and safety systems on site.
You neatly record all performed maintenance work in the logbook and collaborate smoothly with external technicians.

What we offer

top salary
excellent insurance packages
meal vouchers

Fulltime

Maintenance Electrician - Weekend Day shift

At Baxter, we believe every person—regardless of who they are or where they are ...

Location

Canada , Alliston

Salary:

44.00 USD / Hour

Baxter

Expiration Date

Until further notice

Requirements

3 plus years’ experience (inclusive of apprenticeship hours)
Ontario Secondary School Diploma or Ontario Grade 12 Equivalency program
Must hold a valid provincial certification as an Industrial Electrician license (442A)
Must have PLC knowledge and experience
Demonstrated use of advanced troubleshooting and diagnostic skills to determine the root cause of complex machine failures
Experience working in a fast-paced environment
Proof of apprenticeship

Job Responsibility

Troubleshoot and repair electrical and mechanical breakdowns with precision
Take breakdown calls as primary or backup status as assigned to ensure seamless operations
Craft and sketch electrical services for machinery to support continuous improvement
Perform electrical maintenance on Radio Frequency generators
Collaborate with Industrial Mechanics on machinery repairs and maintenance
Apply your PLC knowledge to perform troubleshooting
Install new electrical services with or without electrical drawings
Mark wiring changes on drawings to maintain accurate documentation
Strictly adhere to preventative maintenance schedules for all equipment

Fulltime

New

Director, Predictive Analytics and AI

Join Takeda as a Director, Predictive Analytics and AI out of our Cambridge, MA ...

Location

United States , Cambridge

Salary:

177000.00 - 278080.00 USD / Year

BioLife Plasma Services

Expiration Date

Until further notice

Requirements

Master’s or Ph.D. in Computer Science, Data Science, Statistics, Engineering, Economics or a related field required
10+ years of hands-on experience in AI/ML modeling, with at least 5 years in pharmaceutical commercial analytics required
Prior people management experience required
Strong technical expertise in machine learning, NLP, and recommendation systems
Experience with pharma data (e.g., IQVIA, Veeva, SP & claims) and strong understanding of compliance and privacy considerations
Proficiency in Artificial Intelligence, with demonstrated expertise in establishing GenAI (Generative AI) and Agentic AI methodologies and solutions
Proficient in Data Science tools and languages such as Python, R, SQL, Databricks, and is familiar with cloud platforms (AWS, Azure, GCP)
Expert in delivering persuasive presentations, conveying complex advanced Data Science driven insights to non-technical audience, and mentoring others in presentation skills
Excellent communication and collaboration skills, with the ability to work effectively in cross-functional teams
Strong project management skills, with the ability to manage multiple projects simultaneously

Job Responsibility

Advance Data Science and AI capabilities driving the utilization of predictive models in areas including Patient finding, HCP Targeting and Prioritization, Next Best Action Engines, predictive secondary data driven Patient and predictive Customer Segmentations
Advance Predictive Analytics for US. GI, NS, PDT, and Rare Disease Franchises, including new product launches or indications
Partner with BUs, BU Analytics & Insights, Marketing and Sales Ops, Data CoEs etc.to define use cases and integrate predictive model-driven decisioning into business decisions
Strategic Leadership: Develop and execute a future-oriented data science strategy for commercialization, focusing on leveraging predictive and machine learning models to solve complex business challenges
Predictive Modeling & AI Innovation: Design and deploy predictive models—including logistic regression, ensemble methods, and other machine learning algorithms—for key applications such as trialist identification, patient segmentation, next-best-action (NBA), and HCP target prioritization. Lead the development of AI/ML algorithms to predict patient events, identify undiagnosed / misdiagnosed patients to drive targeted HCP engagements. Create scalable, reusable frameworks for AI and machine learning experimentation and deployment across multiple therapeutic areas
Cross-Functional Partnership: Collaborate as a key thought partner with cross-functional teams—including Business Units, Brand Insights & Analytics, Marketing & Sales Operations, Patient Services, and Medical Affairs—to drive business impact. Develop creative strategies to ensemble multiple third-party patient data sets, enhancing coverage and precision in patient identification and predictive segmentations
Mentor and develop talent: Cultivate a high-performing team of data scientists by promoting continuous learning and encouraging the adoption of emerging AI techniques, ensuring a culture of innovation and excellence. Promote ongoing AI skill development through hands-on training, external partnerships, and internal knowledge sharing
GenAI and Agentic AI Initiatives: Establish and lead GenAI and Agentic AI initiatives that are strategically aligned with CA&I goals. Drive the adoption and integration of advanced AI technologies to enhance analytics capabilities, automate insights generation, and support innovative commercial strategies
Innovation & Continuous Improvement: Continually evolve analytical methods, platforms, standards, and toolsets to meet current and future business needs. Lead Data Science team efforts in developing advanced analytic and AI models providing continuous insights into execution optimization, and industry developments
Strategic Consultation & Stakeholder Engagement: Act as a trusted thought partner to franchise Analytics & Insights, forecasting, and Patient Diagnosis Heads - leading data science driven discussions and translating business needs into appropriate predictive modeling strategies

What we offer

short-term and/ or long-term incentives
medical, dental, vision insurance
401(k) plan and company match
short-term and long-term disability coverage
basic life insurance
tuition reimbursement program
paid volunteer time off
company holidays
well-being benefits
up to 80 hours of sick time per calendar year

Fulltime

Program Manager - Automation

Program Managers are responsible for all facets of a given program, including th...

Location

Canada , Windsor

Salary:

80000.00 - 130000.00 USD / Year

Select Tool Inc

Expiration Date

Until further notice

Requirements

Valid Ontario Driver's license and Canadian Passport
Occasional travel required at customer facilities
Previous design and/or build experience related to Automation, Secondary Equipment, Special Machines, Robotics, Vision Systems, and Controls
Knowledge of automotive industry at the OEM and Tier 1 levels
Manufacturing plant processes such as Component Assembly, Fastener/Clip Driving, Sonic Welding, Adhesive Apply & Bonding, Testing & Validation, etc.
Previous experience in a project management role and asset
Team-player, performance-driven
Strong organizational skills, flexible, and highly autonomous
Excellent written and verbal communication skills
Proficient with Microsoft Office, Project, and Excel

Job Responsibility

Develop scope of work documentation to kick off new projects
Develop timelines and project budgets
Participate in customer design reviews and obtain design approvals
Follow project progress in all departments and provide customer updates
Assure timing, quality, and cost goals are consistently met
Participate in internal equipment validation processes and customer equipment buy-off events
Obtain equipment approvals and customer buy-off
Coordinate shipping, installation, commissioning, and acceptance at customer facilities
Provide quotations for scope of work changes or customer driven engineering changes
Promote Select Tool and strengthen customer relations at all times

What we offer

Extended health care
Dental care
Vision care

Fulltime

Control Systems Software Designer

As a member of a highly motivated, multidisciplinary team, you will design and d...

Location

Canada , Woodbridge

Salary:

36.54 - 54.81 USD / Hour

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

A post-secondary degree specializing in Mechatronics, Systems, Electrical or Computer Engineering
3 years of experience programming Programmable Logic Controllers (PLC), and Human/Machine Interfaces (HMI) using Allen Bradley (Rockwell Studio 5000 Logix Designer) or Siemens (TIA Portal) software
3 years of experience in a hands-on automation/controls environment working on Supervisory Control and Data Acquisition (SCADA) and Manufacturing Execution Systems (MES) systems
Proficiency in understanding programs written in structured test (i.e. Visual Basic, C#, Python, languages). Strong programming, mechanical and electrical problem-solving skills
Experience with configuration/troubleshooting of instrumentation (power supplies, meters, sensors, safety switches, etc.) using vendor software and interfaces
Experience working in Just-In-Time environments and on mission critical systems
Ability to communicate effectively, both orally and in writing
Understanding of robotics, control systems and machine operation with hands-on experience is required
A self-starter with the ability to work as part of a team in a fast-paced environment with minimal supervision

Job Responsibility

Design and develop software programs (PLC and/or PC based) specific to customer and project requirements based on standard ATS programming methods (ATS Global Code Standard)
In depth programming in environments mainly using PLC Ladder logic (Rockwell / Siemens platforms), and structured test (i.e. shell scripting, Visual Basic, C#, Python)
Ability to reverse-engineer and write PLC code from scratch
Select, test and integrate hardware and software components such as robots, I/O, analog devices, motion controllers, sensors, vision systems and lasers
Debug and commission control systems at our facility, during the system integration stage and then at the customer's site during installation. Travel to both domestic and international customer locations for SAT (up to 20% travel per year)
Work with other members of the control systems design department and other groups to continuously improve methods of integrating controls technology, with the goals being enhanced safety, enhanced functionality and reduced cost
Work with customers, project managers, designers, toolmakers and electricians to solve problems to provide the customer with a complete, functional automation system
Provide thorough testing of machine functionality to verify software program completeness
Provide accurate documentation for each project and training specific to their current project (i.e. machine operation, programming principles and program structure)
Improve the knowledge and capability of other members of the department through mentoring. Responsible for meeting Team Member level KPIs as assigned. (Budget, Schedule, Quality, CI)

What we offer

Eligible for Annual Incentive Bonus
Stock Purchase Plan
3 Weeks Vacation
Health Care Benefits + $600 Health Care Spending Account
Employee Engagement Events (Employee BBQ’s and lunches, weekly snack day, etc.)
Employee Development Programs
Overtime pay
RSP matching
Employee Referral Bonuses
Educational Reimbursement Program

Fulltime

Steward Guest Service Attendant

Location

Fiji

Salary:

Not provided

Marriott Bonvoy

Expiration Date

Until further notice

Requirements

Year 12 (secondary school level)
Basic English communication skills (speaking and understanding instructions)
Good physical fitness (you’ll be standing, lifting, cleaning for long hours)
Eligible for individuals with working rights in Fiji

Job Responsibility

Operate and maintain cleaning equipment and tools, including the dish washing machine, hand wash stations pot-scrubbing station, and trash compactor
Wash and disinfect kitchen and store room areas, tables, tools, knives, and equipment
Receive deliveries, store perishables properly, and rotate stock
Ensure clean wares are stored in appropriate areas
Use detergent, rinsing, and sanitizing chemicals in the 3-compartment sink to clean dishes
Inspect, pull, and stack cleaned items, send soiled items back for re-scrubbing and re-washing
Rack and spray all racked items with hot water to loosen and remove food residue
Sort, soak, and wash/re-wash silverware
Breakdown dirty bus tubs
Empty and maintain trashcans and dumpster area

Fulltime

Machine Builder

The Machine Builder is responsible for assembling equipment according to mechani...

Location

United States , Ogden

Salary:

Not provided

JR Automation

Expiration Date

Until further notice

Requirements

Basic computer skills
Intermediate proficiency reading part and assembly drawings
Proven mechanical aptitude with a focus on safety and quality
Proven ability to accept direction and complete tasks as assigned while working as part of a team or individually
Ability to maintain a steady pace while bending, kneeling, climbing ladders, and climbing onto and beneath machines
Ability to lift to 50 lbs. as required
Ability to obtain a Hi-Lo (Forklift), Aerial Platform and Overhead Crane license, along with Lock Out Tag Out training, while employed at JR
Ability to provide own hand tools and toolbox suitable for the job (a list of those recommended will be provided)
Proficient with skills outlined in Module 1
Travel at least 20% of the time may be required

Job Responsibility

Assembly of equipment per mechanical drawings
Ensure that changes and problems get documented and communicated
Carry out assigned tasks with minimum direct supervision
Execute ISO\Quality standards
Communicate with the Machine Build Lead on open issues and progress during the build process
Successful execution of assigned programs as they relate to cost, quality, timing and customer satisfaction
Maintain cleanliness and organization of assigned work area
Assist with preparing material for secondary processes (material finishing, heat treat, and deburring)
Effectively and safely operate: Mill, Lathe, Drill Press, Surface Grinder, Saws, Shears, Presses

What we offer

Competitive wages
medical benefits starting your first day
paid parental leave
Opportunity to work on customized, 1-of-1 automation projects
A collaborative, engineering-driven environment
Career growth and skill development opportunities
A role where craftsmanship and quality truly matter
Work with cutting edge and innovative technologies

Fulltime

Enterprise Service Desk Analyst

We are seeking a highly motivated and experienced Service Desk Technician to joi...

Location

Canada , Winnipeg

Salary:

28.21 CAD / Hour

Randstad

Expiration Date

August 10, 2026

Requirements

Completion of a post-secondary program in Information Technology or a related field, or equivalent education and experience
A minimum of five (2) years of experience in a managed services technical role
Expertise in Microsoft Office 365 and a thorough understanding of Azure Active Directory
Comprehensive knowledge of networking concepts and technologies, including routers, switches, firewalls, LAN, WAN, VPN, network security systems, and intrusion detection systems
Experience with Intune, Defender, Exchange, and other Microsoft applications
Fluency in English (written and verbal)
Ability to travel to various locations as required
Demonstrated ability to work effectively under pressure and manage multiple tasks concurrently
Willingness to work flexible hours and participate in an on-call rotation
Capable of lifting equipment up to 30 lbs

Job Responsibility

Provide first-line support for our customers, troubleshooting issues and ensuring high levels of system performance and reliability
Assist with onboarding new employees by configuring workstations and software
Administer and manage servers, networks, and cloud environments (Azure and Office 365)
Assist in various IT projects, including system enhancements, staging and large volume imaging
Troubleshoot Workstations, Networks, ADDS, DNS, DHCP, File Servers, etc.
Assist with Security reviews, Backup audits, upgrades, and optimization to ensure system integrity and security
Follow hardware and software policies, establishing secure practices and machine best practices
Ensuring timely updates on incident status, upcoming changes, and agreed service interruptions to clients
Provide French language support for our customers as needed
Document common issues and create knowledge base articles for future reference

What we offer

12 month contract
Competitive payrate
Working hours: flexible (7AM-7PM CST) Monday- Friday

Fulltime

Select Country

Secondary machining

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?