Sealer Job at Boeing (Wichita)

Substitute Production Assistant

The BVSD Culinary Center Production Assistant works closely under the supervisio...

Location

United States , Boulder

Salary:

20.27 USD / Hour

Boulder Valley School District

Expiration Date

June 30, 2026

Requirements

Communicate (read, write, and speak) in English
Completed and submitted BVSD online application
Must pass FS Online Training Assessment by completion of probationary period
Offer contingent upon passing post offer physical
Must be able to perform tasks on computers and peripherals
Must pass Math Test upon entry
Must have working knowledge of commercial large scale kitchen equipment, such as slicers, shredders, ovens, mixers, cook/chill machines, chillers, blast chillers, vacuum sealers, and commercial dishwashers
Ability to operate equipment such as hand trucks and pallet jacks
Ability to lift 50 lbs. on a frequent basis

Job Responsibility

Understands and is able to communicate the goals and philosophy of the BVSD Food Services Program
Washes, peels, cuts, or shreds ingredients, utilizing high volume bulk production equipment as required for the task
Measures, weighs, prepares, assembles ingredients and cooks according to the planned menu and prescribed standardized recipes
Participates in the proper receiving, storage and inventorying of food, paper, chemicals and supplies according to the BVSD Food Service Department Standard Operating Procedures
Maintains organized storage of all pans, utensils, storage containers and other small-wares and equipment used in the central production facility
Assists with Catering as needed and assigned. Unique menu needs, preparation of food with focus on quality, presentation and appearance
Ensures the freshness of all prepared items by implementing proper rotation of food items prepared, properly wrapping and labeling prepared food items, and preparing only the amounts of food items as assigned
Participates and maintains the cleanliness and sanitation of all kitchen, café and storage areas under the auspices of BVSDCC including, but not limited to, walk-ins, refrigeration, freezers, and dry storage areas
Monitors and records continuous electronic temperature monitoring (and secondary manual recording) on all cook/chill equipment per the HACCP + Food Safety guidelines
Uses, assembles and disassembles, cleans, and maintains institutional food service equipment such as slicers, shredders, ovens, mixers, Sous Vide Equipment, Cook/Chill, 200 Gallon Commercial Kettles, Grinders, Graters, Choppers, Baggers, Vacuum Seal Equipment, and commercial ware-washers

What we offer

Free high-quality Health and Dental Coverage
Vision Coverage
Supplemental Life Insurance
Employee Assistance Program
Aflac
Identity Theft Protection
Flexible Spending Plans
Retirement Savings Plans
EcoPass

Parttime

New

Paint Shop Process Engineer

Location: Factory ZERO – Detroit-Hamtramck Assembly Center Work Location: Onsit...

Location

United States , Detroit

Salary:

Not provided

General Motors

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Engineering (Mechanical, Electrical, Chemical, Manufacturing, or related field) with 1–3 years of experience in automotive manufacturing, preferably paint or automation, OR 3–5 years of directly relevant experience in paint and/or automation in lieu of a degree
1–3 years (with degree) or 3–5 years (without degree) of automotive manufacturing experience, with emphasis on paint shop operations (e.g., PT/ED, Sealer, Topcoat, Paint Mix Room)
Knowledge of automotive paint process areas (PT/ED, Sealer, Topcoat, Paint Mix Room)
Proven technical and professional skills in manufacturing or assembly plant operations
Ability to interpret blueprints and engineering drawings and learn new systems quickly
Proficiency in Microsoft Office (Word, Excel, PowerPoint, Outlook)
Comfortable supervising hourly employees and coordinating work across multiple groups
Strong communication, planning, and organizational skills
High level of interpersonal skills to work effectively with cross-functional teams and union partners
Demonstrated ability to work as part of an innovative team and independently

Job Responsibility

Design, construction, integration, installation, and continuous improvement of paint shop equipment and tooling required to manufacture high-quality products
Own and execute SORs and project management for tools, stations, or specific paint technologies
Define manufacturing processes, including sequence of operations, equipment parameters, and standard work
Incorporate human factors and ergonomic considerations into process and equipment designs (employee–machine interface)
Ensure efficient material flow into, through, and out of paint process areas
Provide technical direction and oversight to plant personnel and 3rd party vendors/contractors
Lead and support development and testing of advanced paint process technologies, including new materials, application methods, and robotics
Provide detailed feedback to central process champions and engineering teams to drive global best practices
Ensure that paint processes are maintained and running effectively for vehicle production
monitor and adjust as necessary

What we offer

This job may be eligible for relocation benefits

Fulltime

Paint Technician

At Bombardier, we design, build and maintain the world’s peak-performing aircraf...

Location

United States , Wichita

Salary:

Not provided

Bombardier

Expiration Date

Until further notice

Requirements

Experience with preparation and painting aircraft or equivalent (preferred)
Adhere to General Work Requirements
Ability to read engineering drawings
Ability to apply safety absorbent and spray aircraft surface with stripper
Ability to mask, unmask, and re-mask appropriate areas of aircraft surface
Ability to remove stripper, excess paint, and/or contaminants using water, solvents, air blower, and/or brushes
Ability to sand, grind, and buff polished areas, apply putty to body dents, and replace sealer
Ability to apply Alodine using spray equipment
Ability to perform touch-up work
Ability to document work performed per Inspection Procedures Manual (IPM)

Job Responsibility

Read engineering drawings to identify the tasks to be performed in preparation for the application of chemicals and paint to aircraft surface
Apply safety absorbent to hangar floor and spray aircraft surface with stripper to remove all paint
Assist with moving aircraft to appropriate bay
Mask, unmask, and re-mask appropriate areas of aircraft surface to ensure complete protection of windows and other areas susceptible to damage
Remove stripper, excess paint, and/or contaminants using water, solvents, air blower, and/or brushes
Sand, grind, and buff polished areas of aircraft surface, apply putty to body dents, and replace sealer in preparation for the application of primer and paint
Apply Alodine to aircraft surface using spray equipment
Perform touch-up work as required
Document work performed per Inspection Procedures Manual (IPM)
Perform above tasks in support of production, flight test, and other outside areas as required

What we offer

Insurance plans (Dental, medical, life insurance, disability, and more)
Competitive base salary
Retirement savings plan
Employee Assistance Program
Tele Health Program

Fulltime

Metal Fab - Hand Form Specialist

This role is at Spirit AeroSystems, Inc. a wholly owned subsidiary of The Boeing...

Location

United States , Wichita

Salary:

23.66 - 39.32 USD / Hour

Boeing

Expiration Date

Until further notice

Requirements

All applicants must be willing and able to work any shift, including alternative work weeks
All Candidates must pass the WorkKeys Assessment (workkeys.com) or provide verification that they have passed the WorkKeys Assessment
Must be a U.S. Person as defined by 22 C.F.R. §120.15 (U.S. Citizen, lawful permanent resident, refugee, or asylee) to meet export control compliance requirements

Job Responsibility

Fabricate components using associated tasks including deburr, bending, routing, forming, cutting, shearing, straightening, shrinking, bead, flare, flange, punching, countersinking, tapping, chamfering, pressure and leak test, part mark or similar tasks
Use hand, power tools & equipment to complete work assignment
Validate quality of tool(s) prior to setup, during & after job completion
Apply potting compound and sealer as required to complete the job
Work from blueprints, drawings, templates, and check fixtures, form blocks and written/verbal instructions
Self inspection as required of performed task prior to next work sequence. Uses precision measuring equipment (calipers, scales, etc.)
Rework and repair defective products as required
Assist others in the execution of tasks as required
As required layout parts and patterns to facilitate associated operations (shear, route, saw, etc.)
Setup, adjust, maintain and operate all equipment

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
May be eligible for a $5,000 state of Kansas Aviation tax credit for up to five years

Fulltime

New

Senior Robotics Process Engineer

The Opportunity: JR Automation, a Hitachi Group Company, is driven to deliver cu...

Location

United States , Lake Orion

Salary:

Not provided

JR Automation

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering field, associate degree in engineering field
7-10 years of related or equivalent experience programming robots and launching robot systems
5+ years experience commissioning from scratch to customer standards
Experience with one or more robot applications: Material Handling, Dispense (Urethane, Sealer, Adhesive, Paint), Welding (Spot, Arc, Laser)
Familiar with robot peripheral devices, Tool Center Points, offline programming software, External Axis, User Frame
Fanuc RoboGuide, Fanuc Vision, Fanuc 2D Vision, 3D Vision, 3DV
Experience with robotic and third party vision systems
Must be able to travel 35% - 50% to customer sites and other JR locations

Job Responsibility

Teach TCPs, Frames, Loads, DCS (Safety Configuration)
Configure robot I/O (including communications)
Set up and configure various types of dispense process equipment within paint shop and general assembly applications
Set up and configure various types of vision equipment including robot mounted as well as floor mounted systems
Development of Offline Programs (OLPs)
Develop simulations with one or more platforms for internal and external process validations
Use your exposure to cycle time improvement initiatives to optimize robot applications
Confirmation of robot models
Lead robotics projects
Mentor others in the department as applicable

Fulltime

New

Chemical Handler

Under close supervision, Prepare, setup, weigh, package, fill and label. Work in...

Location

United States , Solon

Salary:

Not provided

Avantor

Expiration Date

May 01, 2026

Requirements

High School completion or equivalent (GED)
Minimum 3 years of experience in a manufacturing environment preferred

Job Responsibility

Works safely within the parameters of and complies with company Work Instructions and policies
Weighs and fills chemicals or bulk products in accordance with Production Work Order (PWO)
Operates production scales, including verifications and calibrations
Setup, operate, clean and maintain equipment: automatic heat sealer, electronic floor scale, digistalic pumps, crusher, auger filling unites, autoclave unites, vibrating filler unites, induction sealing equipment, portable exhaust hood, and other equipment as required
Packages finished product for shipping (boxing, labeling) per Work Instructions
Handles hazardous materials using all appropriate or mandatory safety gear
Sweeps and mops floors and cleans workstation after each product filling
Completes documentation in a legible manner
verifies and reviews for accuracy
Maintains expected quality and quantity of work

Fulltime

!

New

Painter

Apply paint, stain and other finishes to property walls, ceilings, and furniture...

Location

United States

Salary:

24.00 USD / Hour

Marriott Bonvoy

Expiration Date

Until further notice

Requirements

Technical, Trade, or Vocational School Degree
At least 1 year of related work experience

Job Responsibility

Apply paint, stain and other finishes to property walls, ceilings, and furniture using brushes, spray guns, or rollers
Apply primers or sealers to prepare new surfaces for finish coats
Remove old finishes by stripping, sanding, wire brushing, burning, or using water and/or abrasive blasting
Cover surfaces with appropriate material for protection during painting and post appropriate paint signs
Clean up and store paint and painting tools and equipment in appropriate areas
Coordinate with vendor in order to modify colors of paint, stain, or varnish
Follow all company and safety and security policies and procedures
report maintenance problems, safety hazards, accidents, or injuries
and complete safety training and certifications
Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets

Fulltime

New

Concrete Foreman

Job Description Summary: Communicate with clients and contractors in a professio...

Location

United States , Charlotte

Salary:

Not provided

Swinerton

Expiration Date

Until further notice

Requirements

Minimum of 3-5 years of experience as a Foreman Cement Finisher or similar role
Proficient knowledge of different sealers, hardeners, and floor curing methods and the proper way to install each method
Recognize slump of concrete and proper mixes for different applications
Display hand-to-eye coordination, mathematical skills, strength, stamina, and detailed orientated
Lift and/or pull 50-100lbs., climb ladders, work off ladders, man lifts or other equipment
Ability to maintain a standing position for extended periods of time, fully squat, bend or kneel while wearing a tool belt
Display basic computer skills
Capable of working in a variety of weather conditions
Uphold Swinerton Core Values of Integrity, Leadership, Passion and Excellence at all times
Adhere to all OSHA and Swinerton safety practices and procedures

Job Responsibility

Provide expertise in performing journeyman-level cement finisher duties
Review project plan and blueprints
and provide estimate time, material, equipment and supplies needed
Develop work schedules and crew assignments
Maintain records of operations
Monitor inventories and request supplies and equipment
Able to calculate concrete qualities
Ensure pour area is prepped and ready
Monitor pour for correct rebar placement, mesh placement, block-outs and sleeves
Ensure tools and equipment are cleaned, maintained and good condition

Fulltime

Sealer

Boeing

Location:
United States , Wichita

Category:
Manufacturing

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 03, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Sealer

Substitute Production Assistant

Paint Shop Process Engineer

Paint Technician

Metal Fab - Hand Form Specialist

Senior Robotics Process Engineer

Chemical Handler

Painter

Concrete Foreman

Sealer

Boeing

Location:United States , Wichita

Category:Manufacturing

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:January 03, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Sealer

Substitute Production Assistant

Paint Shop Process Engineer

Paint Technician

Metal Fab - Hand Form Specialist

Senior Robotics Process Engineer

Chemical Handler

Painter

Concrete Foreman

Location:
United States , Wichita

Category:
Manufacturing

Contract Type:
Not provided

Job Posted:
January 03, 2026