Rotating Equipment Engineer Job at Airswift Sweden (Prudhoe Bay)

Rotating Equipment Engineer

Rotating Equipment Engineer – Houston, TX. Our client is seeking a Rotating Equi...

Location

United States , Houston

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering required
At least 8 years of industry-related experience with large rotating machinery
Experience should include gas turbines, large process or refrigerant compressors, drivers, gearboxes, blowers and pumps and their associated auxiliary support systems and/or skid mounted packaged systems
Experience and knowledge with control systems for typical compression equipment
Familiarity and ability to read and interpret electrical and mechanical diagrams, including flow charts, cause/effect diagrams, and Piping and Instrument Drawings (P&IDs)
Must have a good working knowledge of API, ASME, ANSI, PIP and other process industry codes and standards
Specific knowledge in understanding the vibration as related to rotating equipment
Design and construction knowledge of NEC codes, especially as related to hazardous area applications
Understanding of acoustic pulsation studies and pulsation issues on reciprocating equipment
Ability to maintain multiple assignments with various deadlines and responsibility levels concurrently

Job Responsibility

Participate in audit of EPC-detailed EPC designs for rotating equipment
Ensure equipment is designed and constructed to be safe, to perform the requirements of the process, and to meet the Project specifications
Review equipment inquiry/purchase requisitions & technical bid evaluations supplied by EPC for correctness of selection
Review in an audit and assurance role vendor drawings and data, test procedures, reports and calculations
Attend Kick-off, Detailed Design, Model Reviews, Pre-Inspection Meetings
Participate in Process HAZID and HAZOP analysis as needed
Participates in factory acceptance tests and inspections
Performs other duties as assigned
Provide technical assurance and support for the detailed design phases of the EPC Contractor
Work activities include audit and assurance of EPC's design to Project contractual obligations and specifications through coordination with EPC counterparts and other disciplines

Fulltime

Rotating Equipment Engineer

The Rotating Equipment Engineer provides engineering and technical expertise to ...

Location

United States , Sergeant Bluff

Salary:

Not provided

CF Industries

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Engineering from an ABET accredited institution (preferred Mechanical, Chemical or Electrical)
2+ years of engineering experience in a plant environment
Proficiency in using software tools like Microsoft Office Suite, CMMS systems (e.g., Avantis, SAP), and AutoCAD
Strong analytical, communication, and presentation skills for effective technical discussions and reporting
Basic understanding of plant processes and manufacturing equipment, especially related to anhydrous ammonia and urea fertilizers
Experience with troubleshooting and failure analysis techniques for rotating and reciprocating equipment

Job Responsibility

Lead predictive and preventive maintenance programs, including condition monitoring techniques such as vibration analysis, oil analysis, and ultrasonic inspections
Design and update maintenance procedures, lubrication programs, and preventive maintenance schedules for all critical machinery, ensuring their effectiveness through continuous review and improvement
Monitor critical plant equipment via continuous and offline data collection systems (e.g., Bently Nevada System1), analyzing results and recommending corrective actions to maintain equipment integrity
Conduct root cause failure analyses, prepare technical reports, and provide recommendations to resolve equipment-related issues
Serve as the mechanical acceptance specialist for newly installed rotating equipment, ensuring proper installation, testing, and compliance with mechanical standards
Oversee the technical review and selection of new rotating and reciprocating equipment, including procurement support, spare parts lists, and vendor recommendations. Execute the project by managing equipment installation, commissioning, and ensuring adherence to technical specifications and timelines. Provide oversight for procurement and accounting activities to ensure budget alignment and proper financial tracking
Collaborate with procurement and contractors during equipment installation, commissioning, and maintenance to ensure adherence to specifications
Support turnaround planning, including job sequencing, material procurement, crew allocation, and schedule development, while providing daily updates on progress
Promote standardization across the plant (e.g., pumps, valves, instruments) to enhance efficiency, reduce inventory, and streamline maintenance processes
Maintain and regularly update the plant’s lubrication manual, technical files, and vendor product library

Fulltime

Rotating Equipment Engineer - Midstream

HF Sinclair Midstream is seeking a Rotating Equipment Engineer. This position co...

Location

United States , Artesia; Dallas; Cheyenne; Salt Lake City; Tulsa; Casper

Salary:

Not provided

HF Sinclair

Expiration Date

Until further notice

Requirements

Five to ten years' progressive experience in a pipeline, terminals, refinery or similar chemical processing facility.
Intermediate knowledge of commonly used Pipeline and Terminal engineering mechanical specifications and related ASME/API codes.
Ability to stay abreast of new technology developments and processes.
Ability to communicate effectively with others, strong verbal communication skills, advanced level of reading and writing, ability to perform advanced mathematical calculations.
Advanced ability to work effectively with multiple groups throughout the Organization.
Strong spreadsheet and word processing applications knowledge
strong interpersonal, time-management and organizational skills
ability to provide training to multiple groups on a variety of applicable assigned discipline topics.
Knowledge of various process hazard analysis and root cause analysis methodologies is required.
Ability to coordinate all phases of a project from cradle to grave.

Job Responsibility

Develop, maintain, and interpret pipeline hydraulics, system curves, and pump curves to optimally define the proper operating region
Define and manage key performance indicators (KPI) to measure the effectiveness of the Rotating Equipment Reliability Program
Uses common engineering concepts to perform engineering evaluations, FEED studies for new projects, and assignments for the technical services department
Estimates the cost and feasibility of reliability projects, supervises contractors and field activities as needed.
Knowledgeable on industry specifications regarding design and construction of rotating equipment and associated infrastructure considering appropriate materials of construction and corrosion controls.
Use common engineering process to evaluate, recommend, improve our mechanical systems into a reliability program development including performance measurements like efficiency, vibration, temperature and preventive maintenance intervals.
Recommend and implement improvements in operations procedures and maintenance procedures as needed.
Develop and/or review technical specifications, contract documents and cost estimates for rotating equipment and associated infrastructure (i.e. pumps, starters, transformers, VFDs, MCC)
Upgrade, design, configure, maintain and monitor Pipeline/Terminal equipment according to applicable specs. Review proposals of vendors regarding the purchase of new or modernization of existing processing equipment
Develop small capital project scopes, budgets and AFE’s.

What we offer

Medical Insurance
Vision Insurance
Dental Insurance
Paid Time-Off
401(k) Retirement Plan with match
Educational Reimbursement
Parental Bonding Time
Employee Discounts

Fulltime

Temporary Rotating Equipment Engineer

We are seeking an experienced Rotating Equipment Engineer to support commissioni...

Location

United States , Prudhoe Bay

Salary:

Not provided

Doyon

Expiration Date

Until further notice

Requirements

8+ years of experience in oil and gas or similar industrial environments
Direct experience supporting commissioning and startup of new facilities
Strong background in rotating equipment including pumps, compressors, turbines, and generators
Demonstrated troubleshooting experience in live operating environments
Experience working in remote or field-based operations environments
Familiarity with PSSR, commissioning processes, and startup workflows
Experience with maintenance and reliability programs preferred
Experience working with OEMs and vendors during installation and startup
Strong understanding of rotating equipment fundamentals and failure modes
Vibration analysis and condition monitoring knowledge preferred

Job Responsibility

Promote and lead in the implementation client policies and procedures, including Safety, health, environment, process, people and planning
Support commissioning, pre-startup safety reviews, and startup of rotating equipment including pumps, compressors, turbines, and generators
Participate in system walkdowns, punch listing, mechanical completion verification, and review vendor documentation, test procedures, and commissioning plans to confirm completeness and operational readiness
Provide on-site troubleshooting and technical support during startup and early operations
Diagnose issues related to vibration, alignment, lubrication, seals, and equipment performance to ensure reliable operation and address emerging concerns promptly
Ensure proper installation practices such as alignment, grouting, and coupling setup for rotating equipment
Support the Management of Change (MOC) process for equipment or design modifications to maintain integrity and compliance
Support the development of operating and maintenance procedures for rotating equipment
Assist in establishing maintenance strategies including preventive and predictive maintenance to maximise equipment reliability and longevity
Interface with vendors and subject matter experts to resolve complex technical issues

Fulltime

New

Mechanical & Rotating Engineer

Airswift is seeking a Mechanical and Rotating Equipment Engineer (Onshore) to in...

Location

Brazil , Rio de Janeiro

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor's degree in Mechanical Engineering
Advanced English required
Experience in operation, maintenance, or reliability of rotating equipment in the Oil and Gas sector (offshore/onshore), focusing on centrifugal/reciprocating compressors, pumps, and turbomachinery
Solid knowledge of rotating equipment reliability, RCM, CBM, and PDM services
Hands-on experience in condition monitoring (vibration, oil analysis, thermography) and fault diagnosis
Proven experience in troubleshooting and field condition monitoring
Solid knowledge of API standards (e.g., 610/617/618/670/682/686), machine design, lubrication, mechanical seals (including dry gas seals), rotor dynamics, balancing, alignment, and modal analysis
Practical knowledge of international codes and standards (ASME, ANSI, ISO 10816/20816)
In-depth knowledge of rotating equipment: pumps, compressors, dry gas seal systems and gearboxes

Job Responsibility

Evaluate, respond to, and approve MOC/TA requests, technical changes, and deviations, ensuring compliance with company standards and applicable regulations (API/ASME/ISO/ABNT)
Issue Technical Notes and Guidelines as a recognized subject matter expert, standardizing practices and lessons learned
Ensure complete documentation, traceability, and clear communication with onshore/offshore stakeholders
Monitor the performance of rotating equipment using PDM/CBM techniques: vibration analysis, thermography, and oil analysis (including ferrography and spectroscopy) for early anomaly detection
Supervise and execute Product/Performance Data Monitoring (PDM) services, recommending corrective and preventive actions
Develop and implement condition-based maintenance (CBM) programs to optimize availability and reduce downtime
Develop and implement reliability and maintenance (RCM) strategies, with preventive/predictive plans to improve MTBF and lifecycle cost
Perform diagnostics on pumps, centrifugal/reciprocating compressors, gearboxes, and dry gas seal systems
recommend corrective actions
Identify and manage problematic components, conduct disposal plans, and prioritize investments to sustain reliability improvements

Senior Mechanical Equipment Engineer

Join our dynamic team as a Senior Mechanical Equipment Engineer and play a pivot...

Location

Netherlands , Rotterdam

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Mechanical Engineering: Strong background in mechanical systems and equipment
Rotating Equipment Expertise: In-depth knowledge of rotating machinery
EPC Experience: Familiarity with Engineering, Procurement, and Construction processes
Problem Solving: Ability to troubleshoot and optimize designs effectively
Project Management: Skills in planning and executing projects within budget and timelines
Communication: Excellent verbal and written communication skills for effective collaboration
Qualifications: Engineer Diploma in relevant discipline required
Experience: Proven experience in mechanical engineering roles, particularly in the energy sector
At least 5 years of experience on Mechanical Engineering background
Rotating and/or Marine equipment experience

Job Responsibility

Selection of methods and procedures for mechanical design and engineering
Proactively plan and complete activities and deliverables within agreed time frame and budget
Ensure Scope of Work is delivered in accordance with contractual and internal requirements
Utilize lessons learned to understand change impacts across project system boundaries
Coordinate with vendors, subcontractors, and third parties as per contractual requirements
Act as Package Engineer with technical responsibility for design, procurement, and manufacture
Lead engineers on assigned scope of work
Serve as Discipline Lead for an assigned scope of work

Rotating Equipment Analyst

Join our dynamic team as a Rotating Equipment Analyst in the thriving LNG sector...

Location

Angola , Soyo

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Vibration Analysis: ISO level II certification required
Condition Monitoring: Strong competence in Bentley Nevada and trending analysis software
Mechanical Knowledge: Expertise in industrial gas turbines, gas compressors, and centrifugal pumps
SAP Proficiency: Familiarity with CMMS SAP PM modules
Communication Skills: Excellent written and verbal communication skills in English
Interpersonal Skills: Ability to work effectively in a multicultural environment
Technical Support: Provide advisory support on equipment condition and repair strategies
Educational Qualifications: Grade 12 diploma required
preferred degree in Mechanical Engineering specializing in rotating equipment
Certifications: Vibration Analyst ISO level II, experience with used lube oil analysis

Job Responsibility

Conduct day-to-day equipment condition monitoring and vibration data collection using advanced analytical tools
Analyze and predict pump performance, and perform used lube oil analysis to optimize reliability
Implement and operate plant reliability and integrity systems for long-term viability
Generate equipment condition monitoring reports to meet reliability targets
Develop new systems for monitoring plant performance and identify opportunities for optimization
Conduct root cause failure analysis and provide recommendations to prevent future failures
Mentor junior staff and ensure nationalization and competency assurance targets are met
Collaborate with maintenance, operations, and technical teams to enhance equipment reliability
Champion equipment reliability reporting and establish company-level reliability metrics

What we offer

Competitive salary
Full-time contract position with a duration of 12 months, renewable

Fulltime

Rotating Equipment Planner

HF Sinclair in Sinclair, WY is seeking a Rotating Equipment Maintenance Planner ...

Location

United States , Sinclair

Salary:

Not provided

HF Sinclair

Expiration Date

Until further notice

Requirements

A minimum of five years of job-related experience is required
A minimum of a High School Diploma or GED equivalent is required
Proficiency in SAP required
Effective communication skills
Ability to facilitate large meetings
Continuous improvement mindset

Job Responsibility

Plans and schedules maintenance work for rotating equipment including pumps, compressors, turbines, fans, blowers, and gearboxes
Develops detailed job plans including scope, procedures, labor, materials, tools, and safety requirements
Creates and maintains bills of material, drawings, and equipment documentation
Coordinates with Operations, Engineering, Reliability, Purchasing, and contractors
Estimates labor, materials, and costs for work orders
Maintain equipment bills of material, drawings, and technical documentation within the CMMS
Verifies vendor drawings, inspections, and specifications
Performs field walkdowns and job readiness reviews
Supports turnaround, outage, and major overhaul planning
Ensures compliance with safety, environmental, and mechanical integrity requirements

What we offer

Medical Insurance
Vision Insurance
Dental Insurance
Paid Time-Off
401(k) Retirement Plan with match
Educational Reimbursement
Parental Bonding Time
Employee Discounts

Fulltime

Select Country

Rotating Equipment Engineer

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?

Rotating Equipment Engineer

Rotating Equipment Engineer

Rotating Equipment Engineer

Rotating Equipment Engineer - Midstream

Temporary Rotating Equipment Engineer

Mechanical & Rotating Engineer

Senior Mechanical Equipment Engineer

Rotating Equipment Analyst

Rotating Equipment Planner

Our AI answers in your language