Robotics Mechanical Engineer Job at Tutor Intelligence (Watertown)

Mechanical Engineer, Robot Head

Figure is an AI robotics company developing autonomous general-purpose humanoid ...

Location

United States , Sunnyvale

Salary:

120000.00 - 180000.00 USD / Year

Figure

Expiration Date

Until further notice

Requirements

2+ years of experience in mechanical engineering
Bachelor’s or Master’s degree in Mechanical, Biomechanical, Robotics, Mechatronics, or similar field
Expert in using 3D CAD software to design parts with complex geometry
Experience designing and building prototypes
Experienced with simulation and analysis methodology (FEA, MATLAB, etc.)
Ability to write and maintain clean documentation for design processes
Experience with electromechanical integration, such as sensors, motors, motor drivers, wire harnesses, and communication buses

Job Responsibility

Design parts in 3D CAD that satisfy load conditions, industrial design form factor, and durability requirements
Build prototypes to test assembly, range of motion, and wire routing
Generate accurate 2D drawings using GD&T per ASME Y14.5
Work with our GSM team to select a supplier and order parts
Inspect first articles, build test stands, and provide continuous support for parts on robot development platforms

Fulltime

Mechanical Engineer, Robot Ecosystem

We are looking for a Mechanical Engineer to design, test, and implement key hard...

Location

United States , San Jose

Salary:

120000.00 - 180000.00 USD / Year

Figure

Expiration Date

Until further notice

Requirements

2+ years of experience in mechanical engineering
Bachelor’s or Master’s degree in Mechanical, Biomechanical, Robotics, Mechatronics, or similar field
Expert in using 3D CAD software to design parts with complex geometry
Experience designing and building prototypes
Experienced with simulation and analysis methodology (FEA, MATLAB, etc.)
Ability to write and maintain clean documentation for design processes
Experience with electromechanical integration, such as sensors, motors, motor drivers, wire harnesses, and communication buses

Job Responsibility

Design parts in 3D CAD that satisfy load conditions, industrial design form factor, and durability requirements
Build prototypes to test assembly, range of motion, and wire routing
Generate accurate 2D drawings using GD&T per ASME Y14.5
Work with our GSM team to select a supplier and order parts
Inspect first articles, build test stands, and provide continuous support for parts on robot development platforms

Fulltime

Mechanical Engineer

Design, prototype, and deliver the electromechanical systems that let our Neo mo...

Location

United States , Palo Alto

Salary:

110000.00 - 240000.00 USD / Year

1X Technologies

Expiration Date

Until further notice

Requirements

BS/MS Mechanical Engineering
CAD software fluency
Strong fundamentals of structural mechanics
Hands-on prototyping skills
Structural FEA and G&T experience
Extensive bearing selection experience

Job Responsibility

Design mechanical parts and electromechanical subsystems
Perform structural FEA
Select and integrate motors, sensors, PCBAs, cabling
DFx: manufacturability, assembly, cost, serviceability
Build and break prototypes, iterate quickly

What we offer

Comprehensive health, dental, and vision insurance
401(k) with company match
Paid time off and holidays
Equity

Fulltime

Mechanical Engineer

We are looking for a Mechanical Engineer to design, test, and implement key hard...

Location

United States , San Jose

Salary:

120000.00 - 250000.00 USD / Year

Figure

Expiration Date

Until further notice

Requirements

2+ years of experience in mechanical engineering
Bachelor’s or Master’s Degree in Mechanical, Biomechanical, Robotics, Mechatronics, or similar field
Expert in using 3D CAD software to design parts with complex geometry
Experience designing and building prototypes
Experienced with simulation and analysis methodology (FEA, MATLAB etc.)
Ability to write and maintain clean documentation for design processes
Experience with actuators, including strain-wave, planetary, or cycloidal
Experience with electromechanical integration, such as sensors, motors, motor drivers, wire harnesses, and communication buses

Job Responsibility

Design parts in 3D CAD that satisfy load conditions, industrial design form factor, and durability requirements
Build prototypes to test assembly, range of motion, wire routing
Generate accurate 2D drawings using GD&T per ASME Y14.5
Work with our GSM team to pick a supplier and order parts
Inspect first articles, build test stands, and continuously support part on robot development platforms

Fulltime

Mechanical Manufacturing Engineer

Tutor Intelligence is building the technology and processes that allow robots to...

Location

United States , Boston

Salary:

75000.00 - 110000.00 USD / Year

Tutor Intelligence

Expiration Date

Until further notice

Requirements

2–7 years of experience in mechanical, electromechanical, manufacturing, or robotics engineering (startup or hardware product environment strongly preferred)
Strong foundational mechanical engineering skills: GD&T, tolerance analysis, mechanisms, fastening, materials, thermal considerations, structural thinking
High proficiency with SolidWorks (or similar) including assemblies, configurations, drawings, and manufacturable CAD
Demonstrated ability to be hands-on: assembling hardware, diagnosing mechanical issues, inspecting builds, performing root-cause analysis, and validating designs physically—not just in simulation
Experience designing for CNC machining, sheet metal, injection molding, additive manufacturing, and creating production-ready drawings and BOMs
Experience collaborating closely with electrical and controls engineers
comfortable integrating PCBs, sensors, cabling, connectors, and electromechanical components
Strong documentation discipline: clean, accurate ECOs, version control, structured BOMs, and unambiguous drawings and work instructions
Excellent communication skills—able to clearly convey issues, design intent, risks, and test results to technical and non-technical teams
A mindset of ownership, urgency, and craftsmanship. You care deeply about the quality of the hardware you build and how it performs in the field.

Job Responsibility

Own mechanical assemblies across their full lifecycle: design, prototyping, testing, documentation, release, and support in production and field environments
Work side-by-side with technicians and robot operators to observe real behavior, diagnose issues, and drive mechanical improvements grounded in field reality
Design hardware that is robust, simple to assemble, tolerant to operator variability, and maintainable at scale (fixtures, brackets, enclosures, EOAT, strain relief systems, cable routing, etc.)
Apply sound GD&T, tolerance stack-up analysis, fastening strategy, alignment features, and material selection to ensure consistent builds and high reliability
Iterate quickly: prototype, test, measure, refine, and close the loop with manufacturing feedback to continuously improve product quality and throughput
Partner with electrical, controls, supply chain, quality, and field service teams to ensure designs integrate cleanly across the entire robot system
Create clear, concise engineering documentation—drawings, revision-controlled BOMs, WIs, ECOs, and specifications that support accurate and repeatable builds
Drive manufacturing excellence by simplifying assemblies, improving build sequencing, reducing cycle time, and elevating craftsmanship expectations across the team
Support safety across all mechanical and electromechanical designs, accounting for guarding, load paths, strain relief, pinch points, grounding, and stability
Act as a system-level thinker, proactively identifying upstream and downstream impacts and ensuring alignment with operational, electrical, and robotics engineering needs.

Fulltime

Mechanical Engineer - TeleOp

Figure is an AI robotics company developing autonomous general-purpose humanoid ...

Location

United States , San Jose

Salary:

120000.00 - 250000.00 USD / Year

Figure

Expiration Date

Until further notice

Requirements

2+ years of experience in mechanical engineering
Bachelor’s or Master’s Degree in Mechanical, Biomechanical, Robotics, Mechatronics, or similar field
Expert in using 3D CAD software to design parts with complex geometry
Experience designing and building prototypes
Experienced with simulation and analysis methodology (FEA, MATLAB etc.)
Ability to write and maintain clean documentation for design processes
Experience with actuators, including strain-wave, planetary, or cycloidal
Experience with electromechanical integration, such as sensors, motors, motor drivers, wire harnesses, and communication buses

Job Responsibility

Design parts in 3D CAD that satisfy load conditions, industrial design form factor, and durability requirements
Build prototypes to test assembly, range of motion, wire routing
Generate accurate 2D drawings using GD&T per ASME Y14.5
Work with our GSM team to pick a supplier and order parts
Inspect first articles, build test stands, and continuously support part on robot development platforms

Fulltime

Mechanical Engineer, Sustaining

Figure is an AI robotics company developing autonomous general-purpose humanoid ...

Location

United States , San Jose

Salary:

120000.00 - 180000.00 USD / Year

Figure

Expiration Date

Until further notice

Requirements

5+ years of experience in mechanical engineering
Bachelor’s or Master’s Degree in Mechanical, Biomechanical, Robotics, Mechatronics, or similar field
Expert in using 3D CAD software to design parts with complex geometry
Experience designing and building prototypes
Experienced with simulation and analysis methodology (FEA, MATLAB etc.)
Ability to write and maintain clean documentation for design processes
Experience with electromechanical integration, such as sensors, motors, motor drivers, wire harnesses, and communication buses

Job Responsibility

Design parts in 3D CAD that satisfy load conditions, industrial design form factor, and durability requirements
Build prototypes to test assembly, range of motion, wire routing
Generate accurate 2D drawings using GD&T per ASME Y14.5
Inspect first articles, build test stands, and continuously support part on robot development platforms

Fulltime

Senior Mechanical Engineer

This is a high-impact, technically demanding position where you will drive the d...

Location

United States , Mountain View

Salary:

144000.00 - 153900.00 USD / Year

Cyngn

Expiration Date

Until further notice

Requirements

4~8 years of experience in mechanical engineering, ideally in robotics, automotive, or other complex electromechanical systems
Proven record of taking products from concept through mass production
Strong proficiency with SolidWorks and 3D CAD modeling best practices
Understanding of GD&T and tolerance stack-ups for precision assemblies
Experience with PLM systems (Arena or similar)
Hands-on prototyping and test experience — comfortable assembling and debugging systems in a lab
Analysis skills for simple FMEA & Thermal simulations
Ability to collaborate across disciplines
Excellent problem-solving skills, with a data-driven approach to design decisions

Job Responsibility

Own the mechanical technical specification, design, integration, and release for vehicle systems
Create CAD models, detailed drawings, and specifications for parts and assemblies (SolidWorks)
Drive product development cycles from concept to production, ensuring manufacturability and reliability
Troubleshoot issues, identify root causes, and design corrective/preventative solutions
Build, assemble, and operate test fixtures for mechanisms — including necessary coding & electrical setups
Characterize sensing systems (encoders, sensors) for bandwidth, latency, and other system parameters to support closed-loop motor control
Develop and execute test plans, analyze results, and drive design improvements based on data
Work closely with electrical, software, and external engineering partners to meet system-level goals for safety, performance, and cost
Serve as design release engineer for systems such as Electronics enclosures, harnesses, and sheet metal assemblies
Own subsystem Bills of Materials (BOM), assembly structures, and documentation within PLM systems (Arena)

What we offer

Health benefits (Medical, Dental, Vision, HSA and FSA (Health & Dependent Daycare), Employee Assistance Program, 1:1 Health Concierge)
Life, Short-term and long-term disability insurance (Cyngn funds 100% of premiums)
Company 401(k)
Commuter Benefits
Flexible vacation policy
Sabbatical leave opportunity after 5 years with the company
Paid Parental Leave
Daily lunches for in-office employees and fully-stocked kitchen with snacks and beverages
Monthly meal and tech allowances for remote employees

Fulltime

Robotics Mechanical Engineer

Tutor Intelligence

Location:
United States , Watertown

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 04, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Robotics Mechanical Engineer

Mechanical Engineer, Robot Head

Mechanical Engineer, Robot Ecosystem

Mechanical Engineer

Mechanical Engineer

Mechanical Manufacturing Engineer

Mechanical Engineer - TeleOp

Mechanical Engineer, Sustaining

Senior Mechanical Engineer

Robotics Mechanical Engineer

Tutor Intelligence

Location:United States , Watertown

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:January 04, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Robotics Mechanical Engineer

Mechanical Engineer, Robot Head

Mechanical Engineer, Robot Ecosystem

Mechanical Engineer

Mechanical Engineer

Mechanical Manufacturing Engineer

Mechanical Engineer - TeleOp

Mechanical Engineer, Sustaining

Senior Mechanical Engineer

Location:
United States , Watertown

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
January 04, 2026