CrawlJobs Logo

Robotics Install & Commissioning Technician

formic.co Logo

Formic

Location Icon

Location:
United States , Chicago

Category Icon

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

30.00 - 40.00 USD / Hour

Job Description:

The Robotics Install & Commissioning Technician plays a critical role in bringing Formic’s robotic systems from concept to full-scale operation. This role supports end-to-end internal system integration—translating requirements into deployed, commissioned solutions through hands-on fabrication, coding, configuration, pre-installation, in-house validation, and on-site installation at customer facilities. It is a deeply technical, highly collaborative position offering direct exposure to a wide range of real-world robotic deployments.

Job Responsibility:

  • Support internal systems integration for robotics-driven automation solutions, including mechanical and electrical setup, system quality checks, documentation, testing, program updates, troubleshooting, Factory Acceptance Testing (FAT), and final system pack-out
  • Install and commission Formic solutions at customer sites in close collaboration with Deployment Engineers and Project Managers—handling mechanical installation, power-up, testing, troubleshooting, fine-tuning, performance validation, and final documentation
  • Support refurbishment and reconditioning of returned systems as needed
  • Assist in identifying, validating, and testing solutions both in the field and throughout the deployment lifecycle
  • Test and troubleshoot new automation solutions under development
  • Adhere to Formic’s standardized processes, tools, SOPs, and all applicable legal and safety requirements during integration, configuration, and testing activities

Requirements:

  • Bachelor’s degree in Mechanical Engineering, Electrical Engineering, Mechatronics, or a related field (or equivalent hands-on experience)
  • 3+ years of hands-on experience with industrial 6-axis robots in installation, maintenance, repair, programming, troubleshooting, or technical support roles
  • 3+ years of experience installing and commissioning industrial machinery
  • Willingness to travel up to 50-60% of the time
  • Highly action-oriented with strong problem-solving instincts and the ability to navigate unfamiliar challenges independently
  • Clear, confident communicator - both written and verbal
  • Comfortable using hand tools and working in hands-on technical environments
  • Strong PC and general technical proficiency
  • Valid driver’s license and access to a personal vehicle for local travel (mileage reimbursed per Formic policy)
  • Ability to lift 50+ pounds
  • Based in - or willing to relocate to - the greater Chicago, IL area, with the ability to work five days per week from Formic’s Woodridge, IL office

Nice to have:

Automation experience with end-of-line systems such as robotic palletizing, depalletizing, and/or case packing

What we offer:
  • Equity in Formic
  • Comprehensive Healthcare Coverage: 99% covered Medical, Dental, and Vision insurance plans, with 75% coverage for dependents
  • Additional Fully Covered Insurance Benefits: FSA & DCFSA, Life Insurance, Short-Term Disability, and Long-Term Disability
  • Employee Assistance Program (EAP)
  • Paid Parental Leave
  • Company-sponsored 401(k)
  • Home Office Stipend
  • Monthly Cell-Phone Reimbursement
  • Flexible Time-Off
  • Paid Company Holidays

Additional Information:

Job Posted:
January 03, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Job Link Share:

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Robotics Install & Commissioning Technician

Automation & Controls Technician

As an Automation & Controls Technician at West Fraser, you will play a key role ...
Location
Location
United States , Greenville
Salary
Salary:
Not provided
westfraser.com Logo
West Fraser
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Associate’s degree, equivalent, or greater in Mechatronics, Industrial Electrical, Engineering Technology OR equivalent prior experience as a Technician with good programming/technical skills and prior OSB experience
  • Highly collaborative, technology savvy (proficiency in use of collaboration tools), and willing to learn
  • Proficient in programming and troubleshooting of Programmable Logic Controllers (preferably Rockwell ControlLogix)
  • Ability to visualize physical processes to remotely assist field personnel in set up and troubleshooting
  • Excellent verbal and written communication skills including ability to interpret and disseminate technical info to a wide range of skill sets and support roles
  • Ability to work in shifts and variable schedules to support a 24/7 manufacturing schedule
  • Ability to work well as a team and independently
  • Traveling 20% of less to mill locations
Job Responsibility
Job Responsibility
  • Remotely monitoring the status of critical devices including electrical and mechanical components, circuitry, controls, robotics and other manufacturing machinery and assist in service, repair, and calibration of these devices for multiple OSB and lumber mills
  • Analyzing and identifying causes of system issues and assist in breakdown recovery
  • Assisting in set-up of new and replacement equipment
  • Providing programming support for day-to-day process changes
  • Troubleshooting as needed in coordination with onsite technicians
  • Answering and logging system issues or requests for assistance from automated system monitors or mill manufacturing staff
  • Assisting in upgrading facilities to conform to enhanced automation and digitization standards including providing onsite support of infrastructure installation and commissioning
  • Implementing and maintaining West Fraser Analytics System (NAS), Manufacturing Execution Systems (MES), Model Predictive Control (MPC), and Rockwell ECO System across all facilities
  • Developing PLC programs and HMIs in accordance with West Fraser standards and capital expense guidelines
  • Providing data and support of mill level project analysis and execution
What we offer
What we offer
  • Benefits starting Day 1
  • Competitive starting pay
  • On-the-job training
  • A culture that strongly believes in promoting from within
  • Medical
  • Dental
  • Vision
  • 401K with company match and additional retirement contribution
  • Employee Stock Purchase Plan
  • Life Insurance
  • Fulltime
Read More
Arrow Right

Maintenance Engineer

We are seeking a highly skilled and hands-on Maintenance Engineer with strong ex...
Location
Location
United States , Garden Grove
Salary
Salary:
130000.00 - 160000.00 USD / Year
harbingermotors.com Logo
Harbinger Motors
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Mechatronics, Automation, or equivalent
  • 5+ years of experience in maintenance, equipment engineering, or automation in a high-volume manufacturing environment
  • Strong knowledge in: MTTR, MTBF, Downtime reduction, OEE analysis
  • Siemens & Allen-Bradley PLCs
  • HMI programming
  • Industrial networks (Ethernet/IP, Profinet, Modbus)
  • Electrical controls (high & low voltage)
  • Pneumatics, electromechanics, mechanical systems
  • Cameras and vision systems
  • Automation systems from International OEMs
Job Responsibility
Job Responsibility
  • Perform advanced troubleshooting of automated manufacturing equipment, including PLC-based controls (Siemens & Allen-Bradley), HMI systems, electrical panels, vision systems, drives, robotics, pneumatics, and mechanical systems
  • Diagnose and resolve issues in industrial networks such as Ethernet/IP, Profinet, Modbus, control Ethernet, switches, and distributed I/O
  • Lead root cause analysis (RCA) of chronic equipment issues using 5 Whys, Ishikawa, Pareto, and structured problem-solving tools
  • Implement corrective and preventive actions to increase reliability and reduce unplanned downtime
  • Monitor and improve key maintenance metrics including: MTTR (Mean Time to Repair), MTBF (Mean Time Between Failures), Downtime analysis and reduction, OEE (Overall Equipment Effectiveness)
  • Develop, optimize, and execute preventive and corrective maintenance plans for automated systems
  • Use the CMMS to manage work orders, track failure history, assign tasks, and document activities
  • Create detailed Work Instructions for technicians covering part replacements, calibrations, alignments, and troubleshooting tasks
  • Manage and track spare parts inventory and budget, including lead times and critical spare identification
  • Support installation, integration, and startup of new production equipment including FAT/SAT, equipment commissioning, and multi-ton crane lifts
What we offer
What we offer
  • Comprehensive Health, Dental & Vision (HDV) – 100% employee covered
  • Early-stage Stock Options
  • Robust Retirement Savings (401k, HSA, FSA)
  • Generous Paid Time Off (PTO) & Parental Leave
  • Annual Vacation Bonus
  • Wellness & Fertility Benefits
  • Cell Phone Stipend
  • Complimentary Meals & Stocked Kitchens
  • Fulltime
Read More
Arrow Right
New

Quality Control Inspector

Location
Location
United States , San Diego
Salary
Salary:
Not provided
MillenniumSoft Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Product Inspection experience
  • Experience performing visual inspections as per inspection procedures
  • Oriented to detail
  • One (1) to two (2) years’ experience is desirable
  • Maintains appropriate licenses / training / certifications, as needed
  • Proven ability to correctly interpret drawings and geometric dimensions and tolerances
  • Previous experience participating in continuous improvement activities
  • High school diploma Is desirable but not a must
  • Identifies basic non-compliance within regulations and standards
Job Responsibility
Job Responsibility
  • Responsible for the efficient and effective performance of testing in conformance with regulations and standards
  • Responsibilities include inspection (Visual), analysis of results, determining final disposition of some product and detecting nonconforming conditions
  • Works within clearly defined SOPs and/or scientific methods at the Final Inspection Area
  • Demonstrated understanding in the use of calibrated equipment and ability to follow equipment maintenance repair procedures
  • Adheres to quality guidelines
  • Complies with regulations and standards
  • Fulltime
Read More
Arrow Right
New

Quality Control Inspector

Location
Location
United States , San Diego
Salary
Salary:
Not provided
MillenniumSoft Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Product Inspection experience
  • Experience performing visual inspections as per inspection procedures
  • Oriented to detail
  • One (1) to two (2) years’ experience is desirable
  • Maintains appropriate licenses / training / certifications, as needed
  • Proven ability to correctly interpret drawings and geometric dimensions and tolerances
  • Previous experience participating in continuous improvement activities
  • High school diploma Is desirable but not a must and if the person has experience it should also be enough
  • Identifies basic non-compliance within regulations and standards
Job Responsibility
Job Responsibility
  • Responsible for the efficient and effective performance of testing in conformance with regulations and standards
  • Responsibilities include inspection (Visual), analysis of results, determining final disposition of some product and detecting nonconforming conditions
  • Works within clearly defined SOPs and/or scientific methods at the Final Inspection Area
  • Demonstrated understanding in the use of calibrated equipment and ability to follow equipment maintenance repair procedures
  • Adheres to quality guidelines
  • Complies with regulations and standards
  • Fulltime
Read More
Arrow Right
New

General Assembler

Performs any combination of tasks involved in the fabrication, manufacture, asse...
Location
Location
United States , Sumter
Salary
Salary:
Not provided
MillenniumSoft Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Zero (0) to one (1) year of manufacturing assembly experience
  • Effective communication skills at a level co-workers and Team Lead/Supervisor can understand
  • Ability to read, write, interpret, and comprehend specifications written in English and perform basic math calculations
  • High school diploma or equivalent
  • Ability to use basic tools of measurement, such as microscopes
  • Ability to get along with people and be able to work in a team environment
Job Responsibility
Job Responsibility
  • Performs any combination of tasks involved in the fabrication, manufacture, assembly, testing and packaging of medical devices
  • Setting up, operating, performing maintenance on, and troubleshooting equipment
  • May conduct quality inspections on processing line in accordance with quality specifications
  • Works within clearly defined SOPs and / or scientific methods and adheres to quality guidelines
  • Must be able to work flexible and/or extended hours and report to work on a regular, punctual basis
  • Willingness to rotate into different tasks and responsibilities
  • Fulltime
Read More
Arrow Right
New

Process Engineer

Responsible for process capability, cost reduction, and continuous improvement p...
Location
Location
United States , Canaan
Salary
Salary:
Not provided
MillenniumSoft Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 3 years manufacturing experience preferred
  • Effective Oral/written Communication - Proficient
  • Ability to work as part of a team / Teambuilding - Proficient
  • Independent thinking / Self Driven - Proficient
  • Decision Making Ability - Proficient
  • Machine Design – Proficient
  • Troubleshooting / Problem Solving - Advanced
  • Safety & Ergonomics Expertise – Proficient
  • Project Management - Basic
  • Quality Systems Knowledge – Proficient
Job Responsibility
Job Responsibility
  • Implements and sustains work process for the manufacturing unit
  • Identifies critical equipment setting and creation of standards
  • Creates technical knowledge for the manufacturing unit and transfers the knowledge to the operator and technical associates
  • Coaches associates on continuous improvement methodologies within the manufacturing unit
  • Understands top losses within the manufacturing unit and develops and implements plans to eliminate losses and drive OEE performance
  • Responsible for manufacturing unit change control including validation activities, root cause analysis of prioritized OEE losses, and quality events and deviations
  • Other duties as required to support the needs of the business
  • Fulltime
Read More
Arrow Right
New

General Assembler

Location
Location
United States , El Paso
Salary
Salary:
Not provided
MillenniumSoft Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 4 months of work experience in a manufacturing environment preferred
  • Able to read, write, and understand Basic English preferred
  • Operating skills of manufacturing equipment, tools, and hand/pallet jack is preferred
  • Problem solving skills are highly preferred
  • High School Diploma/GED preferred
  • Possess a basic understanding of production processes within area of assignment and a working knowledge of manufacturing equipment
  • Transport materials of varying weight in accordance with established safety guidelines using material handling equipment and additional assistance as required
  • Demonstrates adherence to safety procedures by monitoring personal and peer behaviors, work environment and housekeeping
  • Available for overtime as needed
  • Performs all duties with attention to quality, safety, and environmental matter such as wearing appropriate personal protective equipment, identifying, reporting, and appropriately responding to hazards in the work area (spills/accidents/near misses), always maintaining proper housekeeping, and properly labeling and storing chemicals
Job Responsibility
Job Responsibility
  • Assume responsibility for the environmental effects of work performed and for the identification and recording of environmental problems as they arise
  • Complete all regulatory training as assigned (GPM, s, ISO14001, OSHA, etc.)
  • Complete Operator Training Program according to established guidelines
  • Be available for other projects or assignments as requested by management
  • Looking for ways to simplify or improve products, services, systems, and processes to achieve
  • Fulltime
Read More
Arrow Right
New

Instrument Test Technician

Conducts production testing of assembled flow cytometers and related medical dev...
Location
Location
United States , San Jose
Salary
Salary:
27.00 - 30.00 USD / Hour
MillenniumSoft Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Min educational requirement should be AS in electronics
  • Some experience in Testing mechanicals (i.e. electronics, lasers)
  • Some experience in manufacturing work setting
  • Requires an Associate's degree (A.S.) or equivalent from two-year college or technical school
  • 3+ years related experience in a high tech, manufacturing environment
  • Ability to effectively communicate information and respond to questions both verbally and in writing
  • Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry
  • Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations
  • Good mechanical aptitude, dexterity and hand/eye coordination. Must be able to reach, bend and lift 35 lbs on a daily basis
  • Experienced in the use of: DVM’s, Oscilloscope and general test equipment
Job Responsibility
Job Responsibility
  • Conducts production testing of assembled flow cytometers and related medical device products
  • May integrate systems and conduct a variety of electronic, mechanical, optical, fluidic and electromechanical activities on systems, subassemblies, and parts to ensure unit functions according to specifications
  • Will be expected to perform system level and subassembly level troubleshooting to determine root cause, and implement correction of assembly or material defects
  • Responsible for producing quality products on schedule
  • Performs instrument optimization functions after final assembly: laser alignment, pressure adjustments, electrical adjustments, etc.
  • Performs final production testing and inspection to ensure products meet performance specifications and standards
  • Analyzes test results on defective units to determine root cause of failure
  • Replaces or repairs defective components or assemblies, processes appropriate paperwork, may return unit to assembly for repair
  • Compares test results with specifications and records test data and plots test results
  • Generates required documentation to complete the Device History Record (DHR)
  • Fulltime
Read More
Arrow Right