CrawlJobs Logo
International Logo International · Manufacturing

Robotic Weld Engineer

United States, Tulsa 100000.00 - 150000.00 USD / Year · Job Posted January 31, 2026
Apply Position
Job Link Share

Job Description

International Motors is seeking a Robotic Weld Engineer to support and advance our automated welding operations in Tulsa, OK. In this hands-on, high-impact role, you will lead the development, optimization, and troubleshooting of robotic weld cells, Fanuc robotic systems, and advanced automation equipment in a fast-paced manufacturing environment. You’ll work closely with engineering, production, maintenance, and suppliers to enhance weld quality, improve cycle times, and drive continuous improvement initiatives.

Job Responsibility

  • Lead cross-functional teams to diagnose fit-up issues in large assemblies and implement corrective actions
  • Read, interpret, and implement weld schedules
  • program Fanuc robots to meet all weld specifications and parameters
  • Evaluate robotic welding processes and develop optimization plans to improve cycle time, throughput, and weld quality
  • Analyze designs, programs, simulations, and test procedures for automated machinery and manufacturing processes
  • Apply engineering judgment when selecting methods and techniques to resolve production, automation, and welding-related issues
  • Communicate technical concepts with programmers, using foundational knowledge of PLC programming and industrial controls
  • Develop, implement, and support controls architecture focused on system stability, uptime, and ease of operation/maintenance
  • Monitor project timelines, technical performance, and budgets to ensure alignment with plant and company objectives
  • Participate in team meetings and continuous improvement projects to enhance manufacturing efficiency and cost-effectiveness
  • Support planning, engineering, and commissioning of controls equipment through final buyoffs in collaboration with suppliers and plant teams
  • Design, build, and commission control panels in accordance with NFPA and NEC standards

Requirements

  • Bachelor’s degree
  • At least 5 years of technical project/program management experience
  • OR Master’s degree
  • At least 3 years of technical project/program management experience
  • OR At least 7 years of technical project/program management experience
  • Qualified candidates, excluding current employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States
  • Proven experience with Fanuc robot programming, troubleshooting, and repair
  • Ability to troubleshoot voltages (24VDC–480VAC) using a multimeter
  • Strong understanding of electrical, hydraulic, and pneumatic schematics
  • Experience with Atlas Copco tool controllers and DC Tool software (ToolsNet, ToolsTalk PowerMAC, ToolsTalk PowerFocus, ToolsTalk 2)
  • Proficiency in Allen Bradley PLCs (SLC, CompactLogix, ControlLogix) and software (RSLogix 500/5000, Studio 5000)
  • Experience programming or troubleshooting Allen Bradley VFDs (PowerFlex, ArmorStart)
  • Familiarity with AutoCAD or similar drafting software
  • Advanced proficiency with Microsoft Office 365
  • Strong organizational skills with the ability to manage multiple concurrent projects, contractors, and subcontractors
  • Experience with project scheduling, budget tracking, and performance monitoring
  • Data-driven problem solving and a continuous improvement mindset

Nice to have

  • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Robotics, Automation Engineering, or a related field (or equivalent experience)
  • 3–7 years of experience in robotic welding, welding automation, or manufacturing automation engineering

What we offer

  • market-based compensation
  • health benefits
  • 401(k) match
  • tuition assistance
  • EAP
  • legal insurance
  • employee discount program
International - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Robotic Weld Engineer

8 matching positions

Manufacturing Engineer - Weld

As a Manufacturing Engineer – Weld, you will support the development, optimizati...
Location
Location
United States , Batesville
Salary
Salary:
96000.00 - 132000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Welding or Industrial Engineering required
  • Over 2 years of job-related experience in manufacturing and weld engineering
  • Experience with Lean Manufacturing subject areas
  • Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
  • Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
  • A strong mechanical and metallurgical background with a thorough knowledge of welding is preferred (GMAW, GMAW-P, RSW, GTAW)
  • Knowledge of welding processes, equipment and robotic applications
  • Ability to develop, lead and implement multiple projects, simultaneously and still meet desired results
  • Demonstrated leadership of capital / CI projects focused on meeting departmental goals
  • Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions
Job Responsibility
Job Responsibility
  • Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
  • Troubleshoot new or existing product problems involving designs, materials, or processes
  • Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
  • Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
  • Perform nonconforming material analysis and create NCM reports
  • Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
  • Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
  • Ability to design and set up weld robot cells for maximum efficiency
  • Update/create documentation for job instructions, work instructions, and standard operating procedures
  • Ensure safety procedures are followed, work areas are clean and maintained, and the department is following regulatory compliance requirements
What we offer
What we offer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Flexible Spending Accounts
  • educational assistance programs
  • commuting benefits
  • Fulltime
Read More
Arrow Right

Manufacturing Engineer - Weld

This is where your work makes a difference. At Baxter, we believe every person—r...
Location
Location
United States , Batesville
Salary
Salary:
96000.00 - 132000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Welding or Industrial Engineering required
  • Over 2 years of job-related experience in manufacturing and weld engineering
  • Experience with Lean Manufacturing subject areas
  • Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
  • Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
  • A strong mechanical and metallurgical background with a thorough knowledge of welding is preferred (GMAW, GMAW-P, RSW, GTAW)
  • Knowledge of welding processes, equipment and robotic applications
  • Ability to develop, lead and implement multiple projects, simultaneously and still meet desired results
  • Demonstrated leadership of capital / CI projects focused on meeting departmental goals
  • Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions
Job Responsibility
Job Responsibility
  • Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
  • Troubleshoot new or existing product problems involving designs, materials, or processes
  • Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
  • Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
  • Perform nonconforming material analysis and create NCM reports
  • Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
  • Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
  • Ability to design and set up weld robot cells for maximum efficiency
  • Update/create documentation for job instructions, work instructions, and standard operating procedures
  • Ensure safety procedures are followed, work areas are clean and maintained, and the department is following regulatory compliance requirements
What we offer
What we offer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Additional benefits: Flexible Spending Accounts, educational assistance programs, commuting benefits, Employee Discount Program, Employee Assistance Program (EAP), childcare benefits
  • Insurance coverage for basic life, accident, short-term and long-term disability, business travel accident insurance
  • Fulltime
Read More
Arrow Right

Manufacturing Engineer - Weld

As a Manufacturing Engineer – Weld, you will support the development, optimizati...
Location
Location
United States , Batesville
Salary
Salary:
96000.00 - 132000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Welding or Industrial Engineering required
  • Over 2 years of job-related experience in manufacturing and weld engineering
  • Experience with Lean Manufacturing subject areas
  • Ability to work to a high degree of accuracy in a broad range of tasks associated with production welding with limited supervision
  • Knowledge of design techniques, weld tooling, and weld processes involved in the production of precision technical plans, blueprints, drawings, and models
  • Knowledge of welding processes, equipment and robotic applications
  • Ability to develop, lead and implement multiple projects, simultaneously and still meet desired results
  • Demonstrated leadership of capital / CI projects focused on meeting departmental goals
  • Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions
  • Determining how a system should work and how changes in conditions, operations, and the environment will affect outcomes
Job Responsibility
Job Responsibility
  • Identify opportunities or implement changes to improve products or reduce costs using knowledge of fabrication processes, tooling and production equipment, weld processes, quality control standards, or product design, powder coating, materials and parts
  • Troubleshoot new or existing product problems involving designs, materials, or processes
  • Confer with engineers or other personnel to implement operating procedures, resolve system malfunctions, or provide technical information
  • Determine root causes of failures using statistical methods and recommend changes in designs, tolerances, or processing methods
  • Perform nonconforming material analysis and create NCM reports
  • Plan and establish sequence of operations to fabricate, weld, paint, plate parts or products and to achieve maximum efficiency and utilization
  • Read and interpret blueprints, technical drawings, schematics, or computer-generated reports
  • Ability to design and set up weld robot cells for maximum efficiency
  • Update/create documentation for job instructions, work instructions, and standard operating procedures
  • Ensure safety procedures are followed, work areas are clean and maintained, and the department is following regulatory compliance requirements
What we offer
What we offer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays (Part-Time will be prorated based on the hours you work)
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Flexible Spending Accounts
  • Commuting benefits
  • Employee Discount Program
  • Fulltime
Read More
Arrow Right

Weld Engineer

The Weld Engineer supports the design, development, and deployment of automated ...
Location
Location
United States , Holland
Salary
Salary:
Not provided
jrautomation.com Logo
JR Automation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree from 4‐year College or university in related engineering field, or three years related experience and/or training in the welding automation field
  • Exposure to automated welding, prefer GMAW, RSW, LBW
  • Computer skills including – Excel, Word, Outlook
  • Basic understanding of part GD&T
  • Proficient at interpreting weld specifications
  • Ability to work on ITAR related weld projects
  • Travel is approximately 25%. This may include domestic and international travel depending on the project.
Job Responsibility
Job Responsibility
  • Assist in design of weld fixtures
  • Coordinate or assist in weld fixture validation
  • Establish weld process parameters for equipment
  • Setup various types of welding equipment for automation purposes
  • Design, implement and document control systems for various types of automated equipment
  • Conduct robotic programming, coordinate in machine debug, power-up, and machine validation
  • Work with the appropriate build and electrical teams to ensure proper installation and use of weld equipment
  • Ensure that equipment is designed and programmed to customer and/or JR Automation build specifications using standard techniques and approach
  • Ability to serve as a subject matter expert
  • Ability to quote time and equipment to customers process specifications
What we offer
What we offer
  • Competitive wages
  • medical benefits starting your first day
  • paid parental leave
  • Opportunity to work on customized, 1-of-1 automation projects
  • A collaborative, engineering-driven environment
  • Career growth and skill development opportunities
  • A role where craftsmanship and quality truly matter
  • Work with cutting edge and innovative technologies
  • Fulltime
Read More
Arrow Right

Weld Manufacturing Engineer

As a Welding Manufacturing Engineer, you will play a critical role in enabling r...
Location
Location
United States , Los Angeles
Salary
Salary:
138550.00 - 224250.00 USD / Year
hermeus.com Logo
Hermeus
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical Engineering or other related technical discipline
  • Hands-on fabrication, manufacturing, or testing experience with welded aerospace assemblies
  • Strong understanding of weld design principles and mechanical tolerances under thermal and structural loads
  • Must be willing to work extended hours and weekends as needed to support build schedules and testing operations
  • Occasional travel may be required to support suppliers or test campaigns
  • Ability to perform hands-on work in fabrication and prototype build environments, including climbing, lifting, and working in confined areas as required
  • Desire to be part of a high-intensity, mission-focused team driving innovation in hypersonic aircraft development
Job Responsibility
Job Responsibility
  • Develop, qualify, and optimize weld processes and parameters for multiple techniques including, but not limited to, electron beam, laser beam, gas tungsten arc, gas metal arc, plasma arc, resistance, friction-stir, and orbital tube welding
  • Support R&D and production builds of welded aircraft structures, tanks, and propulsion assemblies, providing direct guidance to technicians and manufacturing engineers
  • Collaborate with design and manufacturing engineering to drive weld joint design, fixture development, and assembly methods optimized for manufacturability, precision, and repeatability
  • Lead root cause investigations related to weld performance, material compatibility, and process deviations
  • implement corrective actions based on metallurgical and mechanical findings
  • Plan and execute weld qualification campaigns, including mechanical testing, NDE inspection, and data interpretation
  • Partner with NDE specialists to evaluate weld quality and develop advanced inspection techniques tailored for high-performance aircraft applications
  • Implement process control improvements using feedback from weld tests, NDE, and production data to increase reliability and consistency
  • Identify and integrate automated or robotic welding solutions to improve throughput, consistency, and quality
  • Research and evaluate emerging welding technologies and materials for potential application in hypersonic vehicle manufacturing
What we offer
What we offer
  • Unlimited PTO policy
  • Paid parental leave
  • Potential for year-end bonuses
  • 100% employer-paid health care
  • 401k & Retirement Plans
  • Weekly Paid Office Lunches
  • Fully stocked breakrooms
  • Stock Options
  • Fulltime
Read More
Arrow Right

Program Manager - Automation

Program Managers are responsible for all facets of a given program, including th...
Location
Location
Canada , Windsor
Salary
Salary:
80000.00 - 130000.00 USD / Year
selecttool.com Logo
Select Tool Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Valid Ontario Driver's license and Canadian Passport
  • Occasional travel required at customer facilities
  • Previous design and/or build experience related to Automation, Secondary Equipment, Special Machines, Robotics, Vision Systems, and Controls
  • Knowledge of automotive industry at the OEM and Tier 1 levels
  • Manufacturing plant processes such as Component Assembly, Fastener/Clip Driving, Sonic Welding, Adhesive Apply & Bonding, Testing & Validation, etc.
  • Previous experience in a project management role and asset
  • Team-player, performance-driven
  • Strong organizational skills, flexible, and highly autonomous
  • Excellent written and verbal communication skills
  • Proficient with Microsoft Office, Project, and Excel
Job Responsibility
Job Responsibility
  • Develop scope of work documentation to kick off new projects
  • Develop timelines and project budgets
  • Participate in customer design reviews and obtain design approvals
  • Follow project progress in all departments and provide customer updates
  • Assure timing, quality, and cost goals are consistently met
  • Participate in internal equipment validation processes and customer equipment buy-off events
  • Obtain equipment approvals and customer buy-off
  • Coordinate shipping, installation, commissioning, and acceptance at customer facilities
  • Provide quotations for scope of work changes or customer driven engineering changes
  • Promote Select Tool and strengthen customer relations at all times
What we offer
What we offer
  • Extended health care
  • Dental care
  • Vision care
  • Fulltime
Read More
Arrow Right

Welding And Sealing Engineer

Welding And Sealing Engineer - GM Oshawa is looking for a dynamic, experienced S...
Location
Location
Canada , Oshawa
Salary
Salary:
76100.00 - 114300.00 USD / Year
gm.com Logo
General Motors
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Certified Mechanical or Electrical Engineer or demonstrated equivalent experience
  • Strong technical knowledge of welding, sealing, and joining processes in a manufacturing environment
  • Experience with automated and robotic joining systems and related process analytics
  • Knowledge of resistance welding, MIG welding, clinching, sealing systems, projection welding, and self-piercing rivets
  • Strong problem-solving and analytical skills with the ability to use data to drive decisions
  • Ability to manage multiple priorities and respond quickly in a fast-paced production environment
  • Strong communication and collaboration skills across technical, operational, and supplier teams
  • High level of ethics, integrity, and accountability
  • Demonstrated ability to implement innovative manufacturing processes and continuous improvement solutions
Job Responsibility
Job Responsibility
  • Lead welding, sealing, and joining strategy for Body-In-White assemblies
  • Serve as process owner for resistance spot welding, MIG welding, projection welding, drawn arc stud welding, self-piercing rivets, clinching, and robotic dispense systems
  • Work with cross-functional teams and suppliers to meet build requirements, launch timing, and production targets
  • Monitor process performance using plant data and analytics tools, identify trends, and implement corrective actions to improve quality and throughput
  • Troubleshoot weld and joining issues affecting production, equipment performance, and vehicle quality
  • Support production trials, engineering changes, and new product launches to ensure process readiness and robustness
  • Develop and implement continuous improvement actions to reduce scrap, improve reliability, and increase line performance
  • Create and maintain process documentation, including control plans, parameter sheets, preventive maintenance plans, manuals, and standard work
  • Support capital and tooling projects, including equipment specifications, runoff, buyoff, installation, and commissioning
  • Train internal trades and provide technical support during emergency breakdowns and complex equipment issues
What we offer
What we offer
  • Paid time off including vacation days, holidays, and supplemental benefits for pregnancy, parental and adoption leave
  • Healthcare, dental and vision benefits including health care spending account and wellness incentive
  • Life insurance plans to cover you and your family
  • Company and matching contributions to a Defined Contribution Pension plan to help you save for retirement
  • GM Vehicle Purchase Plan for you, your family, and friends
  • Fulltime
Read More
Arrow Right

Robotics Process Engineer II

The Opportunity: JR Automation, a Hitachi Group Company, is driven to deliver cu...
Location
Location
United States , Lake Orion
Salary
Salary:
Not provided
jrautomation.com Logo
JR Automation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's Degree in Engineering Technology, Mechatronics, or related field OR Associate's Degree with 2+ years of related experience
  • Minimum of 2 years of related experience with robot peripheral devices, tool center points, offline programming software, external axes, and user frames
  • Experience with one or more robot applications: Material Handling, Dispense (Urethane, Sealer, Adhesive, Paint), Welding (Spot, Arc, Laser)
  • Willingness to travel up to 35–50% to customer sites and other JR locations
  • Successfully complete a 10-panel drug screen, physical examination, and background check
Job Responsibility
Job Responsibility
  • Develop simulations using one or more platforms for internal and external process validation
  • Apply cycle time improvement strategies to optimize robotic applications
  • Confirm robot models and develop offline programs (OLPs)
  • Teach Tool Center Points (TCPs), Frames, and Loads
  • Configure robot I/O, including communication protocols
  • Set parameters for application-specific equipment
  • Train and mentor team members as directed
  • Fulltime
Read More
Arrow Right