RF Test Engineer Job at Amentum (Dahlgren)

RF Test Engineer

The RF Test Engineer contributes to the design support, integration, testing, an...

Location

Canada , Ottawa

Salary:

Not provided

Myticas Consulting

Expiration Date

Until further notice

Requirements

Diploma in Electronics Engineering Technology, RF Engineering Technology, Computer Engineering Technology, or a related field, along with 3 to 5 years of relevant experience
OR Degree in Electrical, Electronics, or Computer Engineering, with 2 to 3 or more years of relevant experience
Hands-on experience working in an RF or electronics test facility/environment
Experience with Linux-based development or test systems
Candidates must be eligible to obtain and maintain Canadian security clearance

Job Responsibility

Set up, operate, and support RF and electronics test environments, including benches, racks, chambers, and shielded or anechoic enclosures
Conduct RF and electronic measurements such as frequency, power, gain, noise figure, phase noise, and intermodulation
Carry out test plans in support of development, verification, and qualification programs
Assist with system-level troubleshooting of RF hardware, electronic assemblies, and software-controlled systems
Develop and apply advanced RF test techniques under the direction of senior engineers
Configure and maintain Linux-based systems used for test automation and data analysis
Perform basic Linux administration, including user management, file systems, scripting, and log review
Support Ethernet-connected and IP-controlled test equipment
Troubleshoot networking issues related to TCP/IP, VLANs, and instrument communications
Use virtual machines and virtualized environments to support automation tools and isolated test setups

RF Test Engineer

The RF Test Engineer is responsible for designing, developing, and executing tes...

Location

United States , Seattle

Salary:

100000.00 - 180000.00 USD / Year

Sigma Design

Expiration Date

Until further notice

Requirements

Bachelor of Science in Electrical Engineering or related Engineering degree required
Master’s degree preferred
3+ years of experience in RF testing, hardware validation, or related engineering roles
Hands-on experience with RF test equipment such as spectrum analyzers, vector network analyzers (VNAs), and radio communication test systems
Experience developing automated tests using Python, LabVIEW, or similar programming tools
Strong troubleshooting and analytical skills related to RF, electrical, and hardware systems
Familiarity with wireless technologies such as LTE, GNSS, and WiFi
Knowledge of RF compliance testing and regulatory considerations
Exposure to antenna systems, PCB debugging, and hardware validation methodologies
ITAR - Permanent resident of the United States (“U.S. person” as defined by ITAR)

Job Responsibility

Design and develop RF test setups, fixtures, and hardware to support subsystem and system-level validation
Define and execute test plans to evaluate RF performance and integration with broader system architectures
Develop, maintain, and enhance automated test scripts and supporting software tools
Troubleshoot RF and electrical hardware issues and perform root cause analysis
Conduct environmental and stress testing to validate durability and real-world performance
Partner with hardware, firmware, and software teams to provide test feedback and support design improvements
Document test procedures, results, failures, and corrective actions in a clear and organized manner
Ensure test activities comply with applicable industry standards and safety requirements
Follow Business Technology policies to protect sensitive data and reduce information security occurrences

What we offer

Multiple options for medical insurance and dental insurance including some with FSA and HSA
401(k) with up to 4% company match
15-days of accrued PTO and 9 company paid holidays
Quarterly bonus program
Voluntary benefits: vision, long-term disability, and life insurance

Fulltime

Electrical Engineer II, RF Test Engineer

As an RF Test Engineer, your work will be essential in ensuring that the wireles...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, RF Engineering or similar discipline
Minimum of 3 years of hands-on RF and wireless device testing experience
Minimum of 3 years of wireless device test plan development for evaluating performance of various wireless interfaces against system and product requirements
Solid understanding of basic RF principles and theory, familiar with basic RF technology circuitry stages and topologies
Experience with modern RF technology including multiband Wi-Fi, Bluetooth, Cellular (LTE, 5G FR1), and multi-constellation GNSS and their test methodologies
Cellular experience is a must-have
High level of familiarity of cellular certification processes, test requirements, and test methods (PTCRB, CTIA, GCF, Carrier testing, etc), with hands on experience with device pretesting
Familiarity of worldwide EMC and intentional radiator regulatory standards and test methods (FCC, CE, ETSI, etc)
Proficient with operation of RF equipment such as RF communication testers (CMW, CMX, Litepoint), Network Analyzers, Spectrum Analyzers, RF power meters, Signal Generators, RF Test chambers
Experience with collaborative RF debug at device and circuit level

Job Responsibility

Design and implement test plans to evaluate the performance of wirelessly connected devices, ensuring they meet stringent product and regulatory requirements
Record RF test data and organize results, creating clear, actionable reports
Present findings and recommendations to cross-functional teams, enabling swift resolution of design challenges
Evaluate RF performance characteristics such as Total Radiated Power (TRP), Total Isotropic Sensitivity (TIS), and other over-the-air (OTA) metrics for cellular-enabled wireless devices using advanced equipment
Use instruments like spectrum analyzers and radio communication testers to assess conducted performance of wireless technologies, including LTE, 5G, Wi-Fi, Bluetooth, and GNSS
Support product field evaluations to validate RF performance under diverse real-world conditions, such as urban or rural environments
Investigate and debug issues such as poor sensitivity, low transmit power, or signal interference in wireless devices
Assist in the regulatory pre-certification and formal certification test efforts for hardware by preparing test samples, working closely with external test labs, troubleshooting issues, and ensuring successful completion of certification activities
Expand your knowledge of RF systems, testing methodologies, and certification standards while working closely with experienced engineers to develop your technical expertise and contribute to innovative designs

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

Electrical Engineer II, RF Test Engineer

As an RF Test Engineer, your work will be essential in ensuring that the wireles...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, RF Engineering or similar discipline
Minimum of 3 years of hands-on RF and wireless device testing experience
Minimum of 3 years of wireless device test plan development for evaluating performance of various wireless interfaces against system and product requirements
Solid understanding of basic RF principles and theory, familiar with basic RF technology circuitry stages and topologies
Experience with modern RF technology including multiband Wi-Fi, Bluetooth, Cellular (LTE, 5G FR1), and multi-constellation GNSS and their test methodologies
Cellular experience is a must-have
High level of familiarity of cellular certification processes, test requirements, and test methods (PTCRB, CTIA, GCF, Carrier testing, etc), with hands on experience with device pretesting
Familiarity of worldwide EMC and intentional radiator regulatory standards and test methods (FCC, CE, ETSI, etc)
Proficient with operation of RF equipment such as RF communication testers (CMW, CMX, Litepoint), Network Analyzers, Spectrum Analyzers, RF power meters, Signal Generators, RF Test chambers
Experience with collaborative RF debug at device and circuit level

Job Responsibility

Design and implement test plans to evaluate the performance of wirelessly connected devices, ensuring they meet stringent product and regulatory requirements
Record RF test data and organize results, creating clear, actionable reports
Present findings and recommendations to cross-functional teams, enabling swift resolution of design challenges
Evaluate RF performance characteristics such as Total Radiated Power (TRP), Total Isotropic Sensitivity (TIS), and other over-the-air (OTA) metrics for cellular-enabled wireless devices using advanced equipment
Use instruments like spectrum analyzers and radio communication testers to assess conducted performance of wireless technologies, including LTE, 5G, Wi-Fi, Bluetooth, and GNSS
Support product field evaluations to validate RF performance under diverse real-world conditions, such as urban or rural environments
Investigate and debug issues such as poor sensitivity, low transmit power, or signal interference in wireless devices
Assist in the regulatory pre-certification and formal certification test efforts for hardware by preparing test samples, working closely with external test labs, troubleshooting issues, and ensuring successful completion of certification activities
Expand your knowledge of RF systems, testing methodologies, and certification standards while working closely with experienced engineers to develop your technical expertise and contribute to innovative designs

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

Radio Frequency (RF) Test Engineer

Silvus Technologies is seeking an RF Test Engineer who will report to the Direct...

Location

United States , San Diego

Salary:

100000.00 - 140000.00 USD / Year

Silvus Technologies (International)

Expiration Date

Until further notice

Requirements

Bachelor of Science degree in Electrical Engineering
Minimum 2 years of relevant multi-GHz RF hardware test experience
Hands-on experience using RF test equipment such as Spectrum Analyzers, Signal Generators, Vector Network Analyzer etc.
Strong troubleshooting skills
Excellent written and verbal communication skills
Experienced with component-level RF circuit characterization and optimization
Must be a U.S. Person (permanent resident or citizen)
Employment is contingent upon the successful clearance of a background check

Job Responsibility

Using RF test equipment to evaluate system performance, evaluate compliance compatibility and troubleshoot operation issues
Carry out RF test execution and generate status and test reports
Define verification matrix and internal specifications of RF performance
Review test result data to ensure that actual performance meets expected requirements
Review and recommend improvements to existing test strategies
Recommend new test techniques and technologies to ensure system performance
Design test fixtures and calibrate test equipment
Understand proper use and handling of sensitive RF circuits and equipment
Rare local travel to other company locations, as required

Fulltime

Senior / Intermediate RF and Test Engineer

Main Responsibilities: Develop system and subsystem verification matrices aligne...

Location

Canada , Ottawa

Salary:

Not provided

Myticas Consulting

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical, Computer, or Systems Engineering
Minimum 20 years of experience in satellite communications
10+ years of experience with various antenna types, including flat panel, parabolic, and aero antennas (Ka-band preferred)
10+ years of experience in satellite RF communication systems, with strong knowledge of modulation and coding standards such as DVB-S2(X) and DVB-RCS2
Strong understanding of RF engineering principles and design practices
Hands-on experience with RF test equipment (oscilloscopes, signal generators, spectrum analyzers, satellite channel emulators)
Solid understanding of air interfaces, modem technologies, and their impact on satellite link performance
Experience performing satellite link budget analysis and assessing performance impairments
Proficiency with test case and defect tracking tools (e.g., Jira, Jama)
Strong communication skills with the ability to work effectively with management, engineering teams, and external partners

Job Responsibility

Develop system and subsystem verification matrices aligned with system requirements
Coordinate and participate in system-level testing activities, including test planning, execution, and reporting
Serve as a Subject Matter Expert (SME) in SATCOM or networking, providing technical guidance to team members
Design, develop, and maintain test cases and test environments to support various validation scenarios
Perform hands-on testing in the LEO lab, focusing on data path and routing features
Collaborate with cross-functional teams (DevOps, Ground Systems, Satellite teams) to promote a cohesive and innovative work environment
Contribute actively to component and subsystem design and testing activities
Configure and operate test equipment such as satellite link emulators, signal generators, spectrum analyzers, and traffic generators
Ensure that products meet technical, functional, performance, and business requirements
Partner with antenna vendors to support SOW, SRR, and related documentation, including test requirements, plans, results, and RVTM reviews

Fulltime

RF Test and Verification Engineer

Our Product Integration and Verification group is seeking a highly motivated and...

Location

United States , North Reading

Salary:

81600.00 - 130500.00 USD / Year

Teradyne

Expiration Date

Until further notice

Requirements

BSEE/MSEE
8+ years of relevant experience as a product test or hardware verification engineer with a focus on AC and/or RF instrumentation
Background in object-orientated programming
C, C++, C# preferred
Experience in a lab setting, debugging hardware, software, and product integration issues
Ability to collaborate cross-functionally to solve issues and overcome challenges
Excellent communication skills
Ability to communicate at different levels of abstraction from detailed engineering discussions to updates with senior managers and directors
Knowledge of statistical analysis techniques
Experience with manufacturing release and support is a plus.

Job Responsibility

Development of AC/RF focused automated test concepts and methodologies to support the measurement capabilities and accuracies required to verify the functionality and performance of our new AC/RF instrumentation products
Development of custom PCBAs and/or other test hardware as needed to support product verification
Development, debug, and release of product verification test software to the product team and ultimately to the factory for production use
Integrate and collaborate with the entire product team to debug and resolve product integration and performance issues.

What we offer

medical
dental
vision
Flexible Spending Accounts
retirement savings plans
life and disability insurance
paid vacation & holidays
tuition assistance programs

Fulltime

RF Integration and Test Engineer

Our defense customer is seeking an RF integration and Test Engineer with backgro...

Location

United States , Lexington

Salary:

55.00 - 80.00 USD / Hour

Connexion Systems & Engineering, Inc

Expiration Date

Until further notice

Requirements

Experience testing RF systems: communications radios, antennas, COTS components, networking, etc.
Experience working on a Linux platform
Experience with programming and scripting languages: MATLAB, Python, C/C++, and Bash
Experience with Ettus USRPs or similar software-defined radios
Bachelor’s Degree in STEM field
Microsoft Office

Job Responsibility

Testbed design and integration with COTS and/or prototype components
Design and implement RF communications and digital processing blocks on USRPs
Define and execute both manual and automated system tests. Tests will be both over-the-wire and over-the-air
Perform RF communications data collection
Perform data analysis and organize RF plus network performance data
Report internally via verbal and written methods

Fulltime

Select Country

RF Test Engineer

Job Description

Job Responsibility

Requirements

Looking for more opportunities?

RF Test Engineer

RF Test Engineer

RF Test Engineer

Electrical Engineer II, RF Test Engineer

Electrical Engineer II, RF Test Engineer

Radio Frequency (RF) Test Engineer

Senior / Intermediate RF and Test Engineer

RF Test and Verification Engineer

RF Integration and Test Engineer

Our AI answers in your language