RF Systems Engineer II Job at Blue Canyon Technologies (Lafayette)

Electrical Engineer II, RF Test Engineer

As an RF Test Engineer, your work will be essential in ensuring that the wireles...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, RF Engineering or similar discipline
Minimum of 3 years of hands-on RF and wireless device testing experience
Minimum of 3 years of wireless device test plan development for evaluating performance of various wireless interfaces against system and product requirements
Solid understanding of basic RF principles and theory, familiar with basic RF technology circuitry stages and topologies
Experience with modern RF technology including multiband Wi-Fi, Bluetooth, Cellular (LTE, 5G FR1), and multi-constellation GNSS and their test methodologies
Cellular experience is a must-have
High level of familiarity of cellular certification processes, test requirements, and test methods (PTCRB, CTIA, GCF, Carrier testing, etc), with hands on experience with device pretesting
Familiarity of worldwide EMC and intentional radiator regulatory standards and test methods (FCC, CE, ETSI, etc)
Proficient with operation of RF equipment such as RF communication testers (CMW, CMX, Litepoint), Network Analyzers, Spectrum Analyzers, RF power meters, Signal Generators, RF Test chambers
Experience with collaborative RF debug at device and circuit level

Job Responsibility

Design and implement test plans to evaluate the performance of wirelessly connected devices, ensuring they meet stringent product and regulatory requirements
Record RF test data and organize results, creating clear, actionable reports
Present findings and recommendations to cross-functional teams, enabling swift resolution of design challenges
Evaluate RF performance characteristics such as Total Radiated Power (TRP), Total Isotropic Sensitivity (TIS), and other over-the-air (OTA) metrics for cellular-enabled wireless devices using advanced equipment
Use instruments like spectrum analyzers and radio communication testers to assess conducted performance of wireless technologies, including LTE, 5G, Wi-Fi, Bluetooth, and GNSS
Support product field evaluations to validate RF performance under diverse real-world conditions, such as urban or rural environments
Investigate and debug issues such as poor sensitivity, low transmit power, or signal interference in wireless devices
Assist in the regulatory pre-certification and formal certification test efforts for hardware by preparing test samples, working closely with external test labs, troubleshooting issues, and ensuring successful completion of certification activities
Expand your knowledge of RF systems, testing methodologies, and certification standards while working closely with experienced engineers to develop your technical expertise and contribute to innovative designs

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

Electrical Engineer II, Video Products - Sustaining

As a member of the Video Electrical Engineering Sustaining team, you will be res...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or similar engineering discipline
Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products
Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics
Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
Strong hands-on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired

Job Responsibility

Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
Perform debug, failure analysis, and rework of electronics systems, circuits, and components
Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more
Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes
Assess and document design change outcomes, test results, and related information and present information to design teams and management
Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

Electrical Engineer II, RF Test Engineer

As an RF Test Engineer, your work will be essential in ensuring that the wireles...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, RF Engineering or similar discipline
Minimum of 3 years of hands-on RF and wireless device testing experience
Minimum of 3 years of wireless device test plan development for evaluating performance of various wireless interfaces against system and product requirements
Solid understanding of basic RF principles and theory, familiar with basic RF technology circuitry stages and topologies
Experience with modern RF technology including multiband Wi-Fi, Bluetooth, Cellular (LTE, 5G FR1), and multi-constellation GNSS and their test methodologies
Cellular experience is a must-have
High level of familiarity of cellular certification processes, test requirements, and test methods (PTCRB, CTIA, GCF, Carrier testing, etc), with hands on experience with device pretesting
Familiarity of worldwide EMC and intentional radiator regulatory standards and test methods (FCC, CE, ETSI, etc)
Proficient with operation of RF equipment such as RF communication testers (CMW, CMX, Litepoint), Network Analyzers, Spectrum Analyzers, RF power meters, Signal Generators, RF Test chambers
Experience with collaborative RF debug at device and circuit level

Job Responsibility

Design and implement test plans to evaluate the performance of wirelessly connected devices, ensuring they meet stringent product and regulatory requirements
Record RF test data and organize results, creating clear, actionable reports
Present findings and recommendations to cross-functional teams, enabling swift resolution of design challenges
Evaluate RF performance characteristics such as Total Radiated Power (TRP), Total Isotropic Sensitivity (TIS), and other over-the-air (OTA) metrics for cellular-enabled wireless devices using advanced equipment
Use instruments like spectrum analyzers and radio communication testers to assess conducted performance of wireless technologies, including LTE, 5G, Wi-Fi, Bluetooth, and GNSS
Support product field evaluations to validate RF performance under diverse real-world conditions, such as urban or rural environments
Investigate and debug issues such as poor sensitivity, low transmit power, or signal interference in wireless devices
Assist in the regulatory pre-certification and formal certification test efforts for hardware by preparing test samples, working closely with external test labs, troubleshooting issues, and ensuring successful completion of certification activities
Expand your knowledge of RF systems, testing methodologies, and certification standards while working closely with experienced engineers to develop your technical expertise and contribute to innovative designs

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

Radio Frequency Engineer II

Barbaricum is seeking a Cellular / Radio Frequency Engineer II to support the de...

Location

United States , Indianapolis

Salary:

Not provided

Barbaricum

Expiration Date

Until further notice

Requirements

Secret (or otherwise) pending clearance verification
Bachelor’s degree in electrical engineering, telecommunications, or related field
Experience with RF engineering and wireless communication systems
Knowledge of cellular technologies and RF propagation principles
Experience with RF testing and analysis tools

Job Responsibility

Design, configure, and optimize cellular and RF communication systems
Conduct RF analysis, testing, and troubleshooting
Support integration of wireless communications technologies into operational environments
Perform spectrum analysis and interference mitigation
Develop engineering documentation and system configuration guidance
Collaborate with network and systems teams to support integrated communications solutions

Electrical Engineer II

As an Electrical Engineer II, you will be tasked with assignments requiring cons...

Location

United States , Middletown, Rhode Island

Salary:

69531.26 - 120901.37 USD / Year

Arcfield

Expiration Date

Until further notice

Requirements

Bachelor of Science Degree in Electrical or Computer Engineering and 4-6 years' related experience
Proficiency with Microsoft Office programs such as Excel, Word, Visio, PowerPoint, and Outlook
Experience with electrical CAD design software such as, Altium, OrCAD, LTSpice
Experience developing or modifying applications using technologies such as C++ (Linux), Java, MATLAB, JavaScript, HTML, CSS, and SQL
Experience working with lab equipment such as multi meters, oscilloscopes, Power Supplies, logic analyzers, Field Fox, etc.
Familiarity with RF test equipment and systems, ideally involving antennas, amplifiers, filters, and signal distribution
Ability to effectively communicate, both orally and in writing, to all levels of the customer organization is required
Ability to effectively interpret customer goals and tasking as assigned
Ability to effectively work independently and/or within a multi-disciplinary team
Exceptional organizational & critical thinking skills, as well as an unwavering attention to detail

Job Responsibility

Design and create electrical schematics, diagrams, and requirements for Technical Data Packages (TDP)
Develop test plans, test readiness evaluations, hardware installation, and troubleshooting
Develop and integrate Printed Cricut Board (PCB) designs into assemblies as required
Testing support, and in-service support of Imaging Systems (Periscopes and Photonics Masts) on US Navy vessels
Perform component analysis on variety of assemblies and RF electronics
Perform diagnostics involving electronics and electrical assemblies
Prototype and debug hardware designs in a lab environment
Perform technical analysis of hardware systems and subsystems
Develop system interconnect diagrams and wire harnesses that connect electronic equipment within an overall system
Perform variety of cable designs (RF, fiber, copper, etc.) within military specification

What we offer

Health Insurance
Life Insurance
Paid Time Off
Holiday Pay
Short Term and Long-Term Disability
Retirement and Savings
Learning and Development opportunities
wellness programs as well as other optional benefit elections

Fulltime

Electrical Engineer II

AEVEX Aerospace is looking for an experienced Electrical Engineer 2 to play a cr...

Location

United States , Tampa

Salary:

Not provided

AEVEX Aerospace

Expiration Date

Until further notice

Requirements

Bachelor's degree in electrical engineering or related field
Minimum of 3-5 years of relevant work experience
Knowledge of electrical design software for schematic capture and PCB layout (Altium (Preferred), Eagle PCB, Autodesk Fusion360, KICAD, etc...)
Knowledge of electrical simulation tools such as LTspice
Knowledge of common industry protocols (LVDS, I2C, HDMI, UART, SPI, CAN, USB, MIPI)
Familiarity with battery-powered Unmanned Aerial Vehicles (UAVs) and associated avionics and electronics such as IMUs, AHRS, BLDC motors, etc...
Knowledge of embedded processors such as ARM, and basic embedded programming skills therein with C/C++
Test and Debug abilities with common lab equipment including DMMs, Oscilloscopes, Spectrum Analyzers, Vector Network Analyzers, Logic Analyzers, etc...
Strong soldering skills required
Strong problem-solving and analytical skills

Job Responsibility

Design, develop and test electrical systems and equipment for military, industrial, commercial, and consumer use related to Unmanned Systems (UAVs, UGVs, USVs) of various types
Develop and maintain electrical system documentation including wiring diagrams and schematics through an organized release process utilizing modern distributed version control technologies such as GIT
Analyze and interpret technical data, such as specifications, blueprints, and schematics, to ensure compliance with applicable codes and regulations
Collaborate with other engineers, technicians, and clients to identify and resolve technical issues and improve system performance
Plan and oversee the installation, operation, maintenance, and repair of electrical systems and equipment
Troubleshoot electrical problems and provide technical support to production staff as needed
Develop and implement automated programming and testing apparatuses to aid in production and quality assurance of circuit boards and subassemblies
Contribute to internal R&D efforts and aid in the transition of these efforts into production
Stay current with new technologies, trends, and best practices in electrical engineering
Perform other duties as assigned

What we offer

401(k)-retirement plan
comprehensive Medical, Dental, Vision, Disability and Life insurance group coverage with a portion of the premiums paid by the company
professional development funds
an Employee Assistance Plan (EAP) with counseling, legal help, child and elder care support.

Fulltime

Software Architect

This role will architect the software of the Adraxe Seizure Alleviation Platform...

Location

United States , Plymouth

Salary:

Not provided

Blackrock Neurotech

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Computer Science or similar
Minimum of 10 years working as a Software Engineer with 3+ years in a software architect or principal engineer role
Proven design experience designing software for complex Class II or Class III medical systems
Experience working within a regulated industry, operating within a medical quality system, and a solid understanding of IEC 62304, ISO 14971, ISO 13485, and FDA QSRs
Experience defining a security architecture
Experience with wireless protocols (e.g., BLE, proprietary RF, NFC) and interfacing with mobile/cloud platforms
Familiarity with safety classification of software items and software risk management
Experience with version control (e.g., Git), requirement management (e.g., DOORS, Jama), and issue tracking tools (e.g., Jira)
Strong written and verbal communication skills
Experience selecting and managing vendors

Job Responsibility

Work cross-functionally to define the SW development process
Define the SW design input requirements
Lead the allocation of software functions across the system. This includes mobile application-based software, embedded software, and cloud services
Collaborate with systems engineering, electrical, mechanical, and quality teams to align hardware-software interface requirements and system-level design
Define and document the software architecture in compliance with IEC 62304 and FDA design control regulations
Define a security architecture and implement cybersecurity risk management aligned with FDA premarket cybersecurity guidance, AAMI TIR57, and AAMI TIR97
Support identification of external partners and consultants together with internal stakeholders
Incorporate UX input into the architecture and design language
Guide software design reviews
Understand patient and user risk and defining mitigation strategies

Fulltime

Electrical Engineer II, Video Products - Sustaining

As a member of the Video Electrical Engineering Sustaining team, you will be res...

Location

United States , Scottsdale

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering or similar engineering discipline
Minimum 5 years of industry electronics design or electronics sustaining experience with mass-produced high-speed, high-density, portable, battery-powered devices, and/or low-power vehicular embedded electronics products
Proficient with identifying and implementing alternate source electronic component solutions and/or circuit design changes necessary to address design improvement, obsolescence, supply chain easement, etc, of released mass production electronics
Proficiency with general process of making design changes to Bills of Material (BOMs), schematics, layouts as needed for change requests
Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDO, other regulators), applications processors/microcontrollers, high speed memory subsystems (LPDDRx, eMMC), high- and low- speed communications interfaces (USB, Ethernet, I2C, SPI), audio components (digital and analog MEMs mics), RF subsystem components (Wifi, BT, LTE, GNSS), sensor systems, protection circuitry (ESD, voltage and current limiting components), SMT connectors, batteries and battery packs, PCBAs, Flex PCBAs, etc
Experience with High Speed circuit design and test (eg. USB3.x, Ethernet, RF, DDRx, etc)
Basic experience with RF integration and test (eg. Bluetooth, BLE, Wifi, GNSS, Cellular)
Strong hands-on proficiency with electronics characterization, verification, debug, and failure analysis using laboratory tools: Oscilloscope, power supplies, multimeters, custom jigs, spectrum analyzer, etc
Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired

Job Responsibility

Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics
Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
Execute bench verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, spectrum analyzers, logic analyzers, power supplies, etc
Perform debug, failure analysis, and rework of electronics systems, circuits, and components
Using OrCAD Schematic tools, improve or modify embedded high-density, high-speed mixed-signal electronic circuits that integrate a wide array of electronics: application processors, microcontrollers, image sensors, high- and low-speed data interfaces, high-speed memory, switch-mode and linear power supplies, batteries, audio subsystems, RF transceivers, discrete digital and analog components, PCBs and Flexible PCBs, and a lot more
Team with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro or other layout tools
Test and evaluate basic RF performance of wireless circuitry (Cellular, Wifi, Bluetooth, GNSS, etc) in assigned in-market products
Map out test methods, perform system and component verification testing, and drive test plans for evaluating electronics design changes
Assess and document design change outcomes, test results, and related information and present information to design teams and management
Provide hardware support (sample preparation, documentation, debug) to the global regulatory compliance team for product certifications (FCC, IC, CE, PTCRB, etc)

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs

Fulltime

RF Systems Engineer II

Blue Canyon Technologies

Location:
United States , Lafayette

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
April 20, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for RF Systems Engineer II

Electrical Engineer II, RF Test Engineer

Electrical Engineer II, Video Products - Sustaining

Electrical Engineer II, RF Test Engineer

Radio Frequency Engineer II

Electrical Engineer II

Electrical Engineer II

Software Architect

Electrical Engineer II, Video Products - Sustaining

RF Systems Engineer II

Blue Canyon Technologies

Location:United States , Lafayette

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:April 20, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for RF Systems Engineer II

Electrical Engineer II, RF Test Engineer

Electrical Engineer II, Video Products - Sustaining

Electrical Engineer II, RF Test Engineer

Radio Frequency Engineer II

Electrical Engineer II

Electrical Engineer II

Software Architect

Electrical Engineer II, Video Products - Sustaining

Location:
United States , Lafayette

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
April 20, 2026