RF Integration Technician Job at Piper Companies (San Diego)

RF Electronics Technician

This role will be responsible for electronics assembly, testing, and verificatio...

Location

United States , Longmont

Salary:

40.00 - 52.00 USD / Hour

Redwire Space

Expiration Date

Until further notice

Requirements

Bachelor's degree in a related field is preferred
relevant experience may be substituted for education
8+ years of direct technical experience with electronic systems, including analog, digital, and RF subsystems
Strong hands-on experience with RF circuits and systems
Experience with soldering & de-soldering using rework tools, such as hot tweezers, hot plates, hot air rework stations and reflow ovens
Understanding of, and experience working with, high reliability products within a quality management system
Excellent manual dexterity with the ability to handle small parts and fasteners, including sizes as small as #0-80
High standard of quality workmanship with attention to detail in assembly, testing, and documentation
One of the following certifications: J-001 for soldering, or IPC-6018 or IPC-6010

Job Responsibility

Provide input for work instructions and procedures for electronics soldering, assembly and testing
Review and interpret complex technical schematics, ensuring accuracy during the build, assembly and testing phases
Perform complex soldering and rework, including surface mount assembly for components as small as 0402, with proficiency in handling a wide variety of package types (e.g., QFN, QFP, TSOP, through hole connectors, etc.) under a microscope
Build and test multi-wire cable harnesses, including developing Interface Control Documents (ICDs) and conducting thorough verification testing
Participate in the assembly and testing of RF electronics hardware
Perform troubleshooting using Test Measurement and Diagnostic Equipment (TMDE), such as vector network analyzers, spectrum analyzers, signal generators, logic analyzers, oscilloscopes, and digital multi-meters
Familiarity with reading electrical and RF schematics
Perform integration of electronic components in support of rapid prototyping requirements

What we offer

Highly competitive benefits package
Commitment to core values of Integrity, Innovation, Impact, Inclusion, and Excellence

Electronics Technician II

Working under general technical guidance, an Electronic Technician II specialize...

Location

USA , Dugway

Salary:

32.42 USD / Hour

Arcata Associates, Inc

Expiration Date

Until further notice

Requirements

High School graduate or High School equivalency
Graduate from an accredited two-year technical school with courses in Math, Basic Electronics, and Microwave Theory or military equivalent training with emphasis on Comm or RF disciplines
At least four years of hands-on experience as a technician operating and maintaining digital and analog equipment resulting in an in-depth knowledge of systems theory of operation
Ability to communicate effectively in both oral and written form
Ability to establish and maintain successful work relationships with those contacted in the performance of this position
Ability to analyze data, resolve problems and make decisions independently
Ability to work in a team environment
Ability to work under deadlines
Ability to use a computer to input and retrieve information and data
Ability to perform work in an ISO compliant/certified environment

Job Responsibility

Perform routine to complex preventive and remedial maintenance on assigned systems and associated electronic equipment to the component level
Repair complex equipment failures, providing guidance to lower-level technicians as required
Performs basic fabrication and/or installation tasks for the construction of mechanical and electronic assemblies for electronic equipment using detailed technical documentation, data and procedures
Provide hardware fabrication, installation, integration, test and checkout of RF emitter equipment and systems
Assist our engineering staff in analyzing, designing, testing, and evaluating RF devices
Align, tune, and test RF Circuits and Subsystems
Document all maintenance and property management information in Maximo
Maintain operational logs and mission summary reports, and enter status, repair and utilization information in the required tracking systems
Performs other related duties as required by management to include supporting other work centers during surges
This may include cross training into other function areas to meet overall contract performance objectives

What we offer

Medical
Dental
Vision
PTO
401K
Due to the remote work location, this position offers an additional $80 per week

Fulltime

Hardware Field Engineer

Under the direction of the E&I Manager, the Hardware Field Engineer performs rou...

Location

United States , Beatty

Salary:

75000.00 - 85000.00 USD / Year

Arcata Associates, Inc

Expiration Date

Until further notice

Requirements

Education: Bachelor's Degree in Electrical Engineering or equivalent field experience and at least five years of related radar, electronic and data processing/control systems involving fielding, integration and sustainment work
Knowledge and understanding of current engineering practices and standards
Apply the principles and techniques of electrical engineering design to specific projects
Ability to manage projects/tasks efficiently and effectively
Ability to provide technical direction to other engineers, technicians and support personnel
Ability to communicate effectively and tactfully in both oral and written form
Write and prepare a variety of technical reports, manuals and other types of written communications
Ability to be self-motivated to complete tasks
Ability to prioritize tasks and effectively multi-task on multiple projects at the same time
Ability to manage client and stakeholder expectations to effectively set and deliver on commitments

Job Responsibility

Work with RF Engineers and O&M personnel to coordinate the activities involved in the sustainment of existing threat and EW systems
Supports systems integration by working with project teams and vendors to field systems ensuring the following elements are addressed: Identify and document system level requirements for range integration to include power, communication, instrumentation and command & control
Validate existing power, communications, instrumentation and command and control (C2) by working with other engineers
Develop processes and procedures that will support training and technician competency to operate and maintain equipment
Recommends and conducts testing, equipment modifications, and recommends corrections to design deficiencies through evaluation of operational capability of systems/equipment and review of performance data against standards
Research, plan and support the design and modifications of existing and new threat and EW systems
Research and analyze data such as customer design proposals, specifications and manuals to determine the feasibility of design or application
Troubleshoot and effectively resolve system issues that involved working with technicians and vendors
Performs periodic preventative maintenance and supports operations when tasked
Capable of providing reports, status, and records activities in a maintenance management system

What we offer

Medical
Dental
Vision
PTO
401K

Fulltime

Hardware Field Engineer

Under the direction of the E&I Manager, the Hardware Field Engineer performs rou...

Location

United States , Tonopah

Salary:

75000.00 - 85000.00 USD / Year

Arcata Associates, Inc

Expiration Date

Until further notice

Requirements

Bachelor's Degree in Electrical Engineering or equivalent field experience and at least five years of related radar, electronic and data processing/control systems involving fielding, integration and sustainment work
Must be able to obtain and maintain a government security clearance
Have a valid NV state issued driver's license
Must be able to work in a field environment with work at remote locations
Must be able to lift 40 lbs, climb ladders, towers and equipment to a minimum of 50 feet
Must have and maintain a valid driver's license
Must have strong computer and organizational skills
The ability to travel as required by the company
Ability to work odd shifts, long hours, weekends, holidays, changing shifts, and overtime
Must possess the ability to establish and maintain effective working relationships with other team members and those contacted in the performance of required duties

Job Responsibility

Work with RF Engineers and O&M personnel to coordinate the activities involved in the sustainment of existing threat and EW systems
Supports systems integration by working with project teams and vendors to field systems ensuring the following elements are addressed: Identify and document system level requirements for range integration to include power, communication, instrumentation and command & control
Validate existing power, communications, instrumentation and command and control (C2) by working with other engineers
Develop processes and procedures that will support training and technician competency to operate and maintain equipment
Recommends and conducts testing, equipment modifications, and recommends corrections to design deficiencies through evaluation of operational capability of systems/equipment and review of performance data against standards
Research, plan and support the design and modifications of existing and new threat and EW systems
Research and analyze data such as customer design proposals, specifications and manuals to determine the feasibility of design or application
Troubleshoot and effectively resolve system issues that involved working with technicians and vendors
Performs periodic preventative maintenance and supports operations when tasked
Capable of providing reports, status, and records activities in a maintenance management system

What we offer

Medical
Dental
401k

Fulltime

Wireless Technician

Responsible for Technical installation and commissioning activities on Wireless ...

Location

Australia , Epping

Salary:

Not provided

Service Stream

Expiration Date

Until further notice

Requirements

2+ years’ experience in 3G and 4G or 5G mobile network rollouts, projects in Australia
Demonstrable skills in fault analysis/diagnosis and corrective actions to satisfactory conclusion
Familiar with installation standards or have strong technical background in telecommunications
RF and Fibre Cable Testing, (preferred)
Experience with fault finding RTWP/MIMO/VSR issues an advantage
White Card
Familiar with WHS requirements and process for high risk activities
Occupational Health and Safety Induction (Construction Industry)
Elevated Work Platform Ticket (preferable)
Safe Work at Heights (preferable)

Job Responsibility

Work with the Crew Supervisor and project manager on creating an efficient way to complete the tasks
Maintain daily records of activities and times
Be responsible for technical duties on site including installation, commissioning and integration of RAN, TX and Microwave equipment on site to vendor and client specifications, TPG, Optus and eJV
Carry out call testing, performance monitoring and other acceptance testing as per vendor and client requirement
Labelling and tagging identification on feeders, tails, jumpers and other cabling to client specifications
Assist with the installation of Microwave Antenna and Outdoor systems
Complete antenna sweeps for PIM, Distance-to-Fault (DTF), Standing Wave Ratio (SWR) and Return Loss (RL) for antenna systems to ensure specifications are within limits
Assist rigging team as required
Troubleshooting, fault finding, defect rectification works as required to provide a quality product to the client
Inspect and maintain tools and equipment, ensure test equipment is maintained within calibration dates

What we offer

Competitive salary as per the Enterprise Agreement, with allowances such as overtime, working at heights, meal allowances, etc

Fulltime

Electronics Technician II

Working under general technical guidance, an Electronic Technician II specialize...

Location

United States , Dugway

Salary:

Not provided

Arcata Associates, Inc

Expiration Date

Until further notice

Requirements

High School graduate or High School equivalency
Graduate from an accredited two-year technical school with courses in Math, Basic Electronics, and Microwave Theory or military equivalent training with emphasis on Comm or RF disciplines
At least four years of hands-on experience as a technician operating and maintaining digital and analog equipment resulting in an in-depth knowledge of systems theory of operation
Ability to communicate effectively in both oral and written form
Ability to establish and maintain successful work relationships with those contacted in the performance of this position
Ability to analyze data, resolve problems and make decisions independently
Ability to work in a team environment
Ability to work under deadlines
Ability to use a computer to input and retrieve information and data
Ability to perform work in an ISO compliant/certified environment

Job Responsibility

Perform routine to complex preventive and remedial maintenance on assigned systems and associated electronic equipment to the component level
Repair complex equipment failures, providing guidance to lower level technicians as required
Perform basic fabrication and/or installation tasks for the construction of mechanical and electronic assemblies for electronic equipment using detailed technical documentation, data and procedures
Provide hardware fabrication, installation, integration, test and checkout of RF emitter equipment and systems
Assist our engineering staff in analyzing, designing, testing, and evaluating RF devices
Align, tune, and test RF Circuits and Subsystems
Document all maintenance and property management information in Maximo
Maintain operational logs and mission summary reports, and enter status, repair and utilization information in the required tracking systems
Perform other related duties as required by management

What we offer

Medical
Dental
Vision
PTO
401K
Additional $80 per week for remote work location

Fulltime

System Engineer 6

The System Engineer applies systems engineering principles throughout the system...

Location

United States , Central Maryland

Salary:

202000.00 - 250000.00 USD / Year

RealmOne

Expiration Date

Until further notice

Requirements

A Bachelor’s degree in a Qualified Engineering Field or a related discipline plus twenty (20) years of systems engineering experience
A High School Diploma or GED plus twenty-four (24) years of general system engineering experience may be substituted for a Bachelor’s degree
A Master’s degree in a Qualified Engineering Field or a related discipline
A PhD in a Qualified Engineering Field or a related discipline plus eighteen (18) years of systems engineering experience
Signals analysis: Digital telecommunications systems to include CEPT, payload data, and signals structures
Processing DMR data using Lopers, and Circuit Raptor
Experience in processing survey data from recordings in IF to RF, Vita-49, capture of snapshots, and processing for data validation using software demodulators to find signal parameters
Cellular communications experience in 2G/3G/4G systems, and PIT radios for processing
Experience in processing data using DRT, Whistle, Salvage, BSAW
Experience using DRT for surveys and variety of hardware and signal processing cards

Job Responsibility

Perform systems engineering activities and assist in the preparation of a work product in a relevant process area
Develop and deliver a work product in a relevant process area
Perform analysis of technical alternatives for a project and make preliminary recommendations
Assist in performing systems engineering activities in a relevant process area
Perform systems engineering activities and assist in the preparation of multiple work products in relevant process areas
Perform systems engineering activities and develop and deliver work products in each of the technical process areas
Independently analyze, and recommend alternatives for elements of project’s technical design
Perform systems engineering activities and develop and deliver work products in a relevant process area
Assist in developing a new or innovative approach to a technical or engineering issue
Assist in conducting an evaluation to determine its suitability for project implementation

What we offer

Healthcare Coverage + Insurance: Medical: Three (3) rich healthcare options through CareFirst with 100% or majority company-paid premiums
Tax-advantaged health savings account available with generous employer contribution
Dental + Vision: 100% employer-paid for employees and family, with a buy-up option available
Retirement + Savings: 401K – 10% TOTAL CONTRIBUTION – 5% safe harbor – 5% annual profit share (both immediately vested!)
Paid Time Off + More: 4 weeks starting PTO – 11 federal holidays + 2 floating holidays – Paid hours for company-required training
Career Growth + Development: Access to FREE 24/7 learning via Udemy – Opportunities to participate in tech councils, industry initiatives, etc. – $7,500 annual Educational & Professional Development Assistance
Paid parental leave
Annual swag drops
Flexible work schedules
Generous referral bonus program

Fulltime

Submarine Electronic Warfare (EW) Systems Test Engineer

Location

United States , Newport

Salary:

68295.59 - 118752.78 USD / Year

Arcfield

Expiration Date

Until further notice

Requirements

Experience as US Navy Submarine IT (E/S) Technician
BS 2-4 years, MS 0-2 years, or HS 8-10 years
Formal testing experience on a Department of Defense (DoD) production delivery environment
Experience working proactively with local and remote test team members
Solid verbal and communications skills among your peers, up the chain of command, along with written/communication skills via Microsoft Office products
Experience with testing in an Agile development environment
Knowledge of requirements management and system modeling tools
Working knowledge of test engineering concepts, principles, and theories
Experience working in the Submarine Warfare Federated Tactical System (SWFTS) submarine community
Recognition of relevant information, and clear communication of issues and alternatives

Job Responsibility

Experience with frequent use and application of technical standards, principles and theories
Works under general supervision, providing solutions to technical problems of moderate scope/complexity
Development of test plans and procedures to support Electronic Warfare subsystems integration, verification, and validation within the Submarine Warfare Federated Tactical Systems (SWFTS)
Lead the execution of test events for Electronic Warfare systems in the lab environment, at NUWC, Contractor testing facilities, shipyards and onboard submarines
Linux experience with file structure and basic troubleshooting commands to be used in the building, configuration and integration of new software for TI-24 and TI-26 systems
Understand the Common Computer Environment (CCE) integration for TI-22 and new technical insertions i.e. TI-24 (+) used System of System and SWFTs software environment
Generation, review, and validation of system requirements verification matrices from performance specifications to support test plan and procedure development
Communication skills to support coordination of test events with ranges, platforms, TYCOMs, sponsors, and the test teams
Development of test reports following completion of the test events. Analysis of data output from test events
Development of emitter simulations to model the environment for lab-based testing

What we offer

Health Insurance
Life Insurance
Paid Time Off
Holiday Pay
Short Term and Long-Term Disability
Retirement and Savings
Learning and Development opportunities
wellness programs

Fulltime

Select Country

RF Integration Technician

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?