RF Integration and Test Engineer Job at Connexion Systems & Engineering, Inc (Lexington)

Senior / Intermediate RF and Test Engineer

Main Responsibilities: Develop system and subsystem verification matrices aligne...

Location

Canada , Ottawa

Salary:

Not provided

Myticas Consulting

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical, Computer, or Systems Engineering
Minimum 20 years of experience in satellite communications
10+ years of experience with various antenna types, including flat panel, parabolic, and aero antennas (Ka-band preferred)
10+ years of experience in satellite RF communication systems, with strong knowledge of modulation and coding standards such as DVB-S2(X) and DVB-RCS2
Strong understanding of RF engineering principles and design practices
Hands-on experience with RF test equipment (oscilloscopes, signal generators, spectrum analyzers, satellite channel emulators)
Solid understanding of air interfaces, modem technologies, and their impact on satellite link performance
Experience performing satellite link budget analysis and assessing performance impairments
Proficiency with test case and defect tracking tools (e.g., Jira, Jama)
Strong communication skills with the ability to work effectively with management, engineering teams, and external partners

Job Responsibility

Develop system and subsystem verification matrices aligned with system requirements
Coordinate and participate in system-level testing activities, including test planning, execution, and reporting
Serve as a Subject Matter Expert (SME) in SATCOM or networking, providing technical guidance to team members
Design, develop, and maintain test cases and test environments to support various validation scenarios
Perform hands-on testing in the LEO lab, focusing on data path and routing features
Collaborate with cross-functional teams (DevOps, Ground Systems, Satellite teams) to promote a cohesive and innovative work environment
Contribute actively to component and subsystem design and testing activities
Configure and operate test equipment such as satellite link emulators, signal generators, spectrum analyzers, and traffic generators
Ensure that products meet technical, functional, performance, and business requirements
Partner with antenna vendors to support SOW, SRR, and related documentation, including test requirements, plans, results, and RVTM reviews

Fulltime

Senior Systems Integration and Test Engineer

STR is focused on delivering National Defense capabilities by driving mission-fo...

Location

United States , Woburn

Salary:

134000.00 - 184000.00 USD / Year

STR

Expiration Date

Until further notice

Requirements

Active DoD Secret Clearance with the ability to obtain a Top Secret (TS) Security Clearance
U.S. citizenship needed by the U.S. Government
BS in Computer Science, Electrical Engineering, Systems Engineering, Aerospace Engineering, or related technical field
Minimum 5 years of relevant experience
Proficiency in Java, C/C++, Labview, or Python
Minimum of 3 years of experience working in I&T
Travel required

Job Responsibility

Working closely with domain experts, development teams, and systems engineers to design and develop hardware and software test environments
Hands on integration work in both hardware labs and field-test environments to ensure that software and/or hardware components are integrated into the system according to specification
Experience in preparing and delivering briefings, familiarity with the execution of technical reviews (SRRs, PDRs, CDRs, TIMS, TRRs)
Participation in the Agile development process with a focus on developing system tests
Documenting and executing test plans and procedures
Capturing and communicating test results and metrics

Fulltime

RF Test and Verification Engineer

Our Product Integration and Verification group is seeking a highly motivated and...

Location

United States , North Reading

Salary:

81600.00 - 130500.00 USD / Year

Teradyne

Expiration Date

Until further notice

Requirements

BSEE/MSEE
8+ years of relevant experience as a product test or hardware verification engineer with a focus on AC and/or RF instrumentation
Background in object-orientated programming
C, C++, C# preferred
Experience in a lab setting, debugging hardware, software, and product integration issues
Ability to collaborate cross-functionally to solve issues and overcome challenges
Excellent communication skills
Ability to communicate at different levels of abstraction from detailed engineering discussions to updates with senior managers and directors
Knowledge of statistical analysis techniques
Experience with manufacturing release and support is a plus.

Job Responsibility

Development of AC/RF focused automated test concepts and methodologies to support the measurement capabilities and accuracies required to verify the functionality and performance of our new AC/RF instrumentation products
Development of custom PCBAs and/or other test hardware as needed to support product verification
Development, debug, and release of product verification test software to the product team and ultimately to the factory for production use
Integrate and collaborate with the entire product team to debug and resolve product integration and performance issues.

What we offer

medical
dental
vision
Flexible Spending Accounts
retirement savings plans
life and disability insurance
paid vacation & holidays
tuition assistance programs

Fulltime

Verification, Validation, and Test Engineer

Arcfield is seeking a skilled Verification, Validation, and Test (VV&T) Engineer...

Location

United States , Chantilly

Salary:

Not provided

Arcfield

Expiration Date

Until further notice

Requirements

Must possess and be able to maintain a TS/SCI clearance with Polygraph
Bachelor’s (or equivalent) in engineering-related field with 8 to 10 years of experience, or Master’s in engineering-related field with 6 to 8 years of experience, or Ph.D. in engineering-related field with 3 to 5 years of experience
Demonstrated experience providing Systems Engineering and Technical Advisory (SETA) support within the Intelligence Community or related domains
Background in high data-rate radio frequency (RF) space/ground communications system testing, systems engineering, and VV&T
Familiarity with automated test tools/equipment and interpreting outputs
Experience in evaluating and integrating complex systems, identifying discrepancies, and recommending corrective actions
Strong oral and written communication skills, with the ability to distill complex technical information into clear, logical, and concise summaries
Excellent organizational and interpersonal skills for effective customer and team engagement
Highly analytical, detail-oriented, and committed to quality, accuracy, and continuous improvement
Self-motivated with strong initiative and follow-through

Job Responsibility

Provide technical and programmatic advisory services during program execution of communication architectures
Review test plans and reports to validate system performance against specifications
Participate in enterprise, system, and acquisition-level test activities, including readiness events and regression testing
Analyze test data to identify trends, discrepancies, and opportunities to improve performance, efficiency, and usability
Complete acquisition systems integration tasks, to include regression testing, and provide deliverables in support of the integration of the products, processes, subsystems, and components of complex enterprise systems
Interact with customers, developers, and supporting contractors for technical information exchange, planning, and execution
Collaborate with engineering teams to balance mission priorities, user needs, and program constraints

Fulltime

RF Test Engineer

The RF Test Engineer contributes to the design support, integration, testing, an...

Location

Canada , Ottawa

Salary:

Not provided

Myticas Consulting

Expiration Date

Until further notice

Requirements

Diploma in Electronics Engineering Technology, RF Engineering Technology, Computer Engineering Technology, or a related field, along with 3 to 5 years of relevant experience
OR Degree in Electrical, Electronics, or Computer Engineering, with 2 to 3 or more years of relevant experience
Hands-on experience working in an RF or electronics test facility/environment
Experience with Linux-based development or test systems
Candidates must be eligible to obtain and maintain Canadian security clearance

Job Responsibility

Set up, operate, and support RF and electronics test environments, including benches, racks, chambers, and shielded or anechoic enclosures
Conduct RF and electronic measurements such as frequency, power, gain, noise figure, phase noise, and intermodulation
Carry out test plans in support of development, verification, and qualification programs
Assist with system-level troubleshooting of RF hardware, electronic assemblies, and software-controlled systems
Develop and apply advanced RF test techniques under the direction of senior engineers
Configure and maintain Linux-based systems used for test automation and data analysis
Perform basic Linux administration, including user management, file systems, scripting, and log review
Support Ethernet-connected and IP-controlled test equipment
Troubleshoot networking issues related to TCP/IP, VLANs, and instrument communications
Use virtual machines and virtualized environments to support automation tools and isolated test setups

Verification, Validation, and Test Engineer

Arcfield is seeking a skilled Verification, Validation, and Test (VV&T) Engineer...

Location

United States , Chantilly

Salary:

Not provided

Arcfield

Expiration Date

Until further notice

Requirements

Must possess and be able to maintain a TS/SCI clearance with Polygraph
Bachelor’s (or equivalent) in engineering-related field with 8 to 10 years of experience, or Master’s in engineering-related field with 6 to 8 years of experience, or Ph.D. in engineering-related field with 3 to 5 years of experience
Demonstrated experience providing Systems Engineering and Technical Advisory (SETA) support within the Intelligence Community or related domains
Background in high data-rate radio frequency (RF) space/ground communications system testing, systems engineering, and VV&T
Familiarity with automated test tools/equipment and interpreting outputs
Experience in evaluating and integrating complex systems, identifying discrepancies, and recommending corrective actions
Strong oral and written communication skills, with the ability to distill complex technical information into clear, logical, and concise summaries
Excellent organizational and interpersonal skills for effective customer and team engagement
Highly analytical, detail-oriented, and committed to quality, accuracy, and continuous improvement
Self-motivated with strong initiative and follow-through

Job Responsibility

Provide technical and programmatic advisory services during program execution of communication architectures
Review test plans and reports to validate system performance against specifications
Participate in enterprise, system, and acquisition-level test activities, including readiness events and regression testing
Analyze test data to identify trends, discrepancies, and opportunities to improve performance, efficiency, and usability
Complete acquisition systems integration tasks, to include regression testing, and provide deliverables in support of the integration of the products, processes, subsystems, and components of complex enterprise systems
Interact with customers, developers, and supporting contractors for technical information exchange, planning, and execution
Collaborate with engineering teams to balance mission priorities, user needs, and program constraints

Fulltime

RF Test Engineer

The RF Test Engineer is responsible for designing, developing, and executing tes...

Location

United States , Seattle

Salary:

100000.00 - 180000.00 USD / Year

Sigma Design

Expiration Date

Until further notice

Requirements

Bachelor of Science in Electrical Engineering or related Engineering degree required
Master’s degree preferred
3+ years of experience in RF testing, hardware validation, or related engineering roles
Hands-on experience with RF test equipment such as spectrum analyzers, vector network analyzers (VNAs), and radio communication test systems
Experience developing automated tests using Python, LabVIEW, or similar programming tools
Strong troubleshooting and analytical skills related to RF, electrical, and hardware systems
Familiarity with wireless technologies such as LTE, GNSS, and WiFi
Knowledge of RF compliance testing and regulatory considerations
Exposure to antenna systems, PCB debugging, and hardware validation methodologies
ITAR - Permanent resident of the United States (“U.S. person” as defined by ITAR)

Job Responsibility

Design and develop RF test setups, fixtures, and hardware to support subsystem and system-level validation
Define and execute test plans to evaluate RF performance and integration with broader system architectures
Develop, maintain, and enhance automated test scripts and supporting software tools
Troubleshoot RF and electrical hardware issues and perform root cause analysis
Conduct environmental and stress testing to validate durability and real-world performance
Partner with hardware, firmware, and software teams to provide test feedback and support design improvements
Document test procedures, results, failures, and corrective actions in a clear and organized manner
Ensure test activities comply with applicable industry standards and safety requirements
Follow Business Technology policies to protect sensitive data and reduce information security occurrences

What we offer

Multiple options for medical insurance and dental insurance including some with FSA and HSA
401(k) with up to 4% company match
15-days of accrued PTO and 9 company paid holidays
Quarterly bonus program
Voluntary benefits: vision, long-term disability, and life insurance

Fulltime

Test and Automation Engineer (Hardware)

We’re looking for a Test and Automation Engineer to join our hardware R&D team b...

Location

Netherlands , Amsterdam

Salary:

Not provided

Optiver

Expiration Date

Until further notice

Requirements

Experienced in hardware test automation, production/manufacturing automation, or embedded systems validation
Strong in Python, with a focus on building clean, maintainable, and scalable automation frameworks
Hands-on experience communicating with and coordinating industrial devices and peripherals
Familiar with Ethernet-based systems and protocols (TCP/UDP sockets, network configuration, packet capture/analysis)
Experienced in automating lab instruments using SCPI, VISA, or vendor-specific APIs
Comfortable working in Linux environments, including command-line tooling, shell scripting, and service management
Able to take ownership of systems end-to-end and operate effectively in a highly collaborative, fast-paced environment

Job Responsibility

Designing, developing, and maintaining automated test frameworks for hardware validation and production testing
Building and maintaining automation for hardware coordination and state control
managing transitions between operational states and integrating with monitoring systems, safety interlocks, and protection mechanisms
Developing Python-based tooling and test suites to exercise hardware interfaces, including Ethernet, SPI/I2C/Serial, Modbus, SCPI, and custom protocols
Implementing and maintaining communication with industrial peripherals and test equipment
Automating lab instrumentation, including oscilloscopes, spectrum analyzers, VNAs, and cable/component testers
Creating and managing CI/CD pipelines that integrate hardware test results into the broader build and release workflow
Instrumenting and monitoring test and production infrastructure by collecting metrics, generating reports, and tracking hardware test coverage over time
Collaborating closely with hardware, RF, and infrastructure engineers to improve system reliability, observability, and testability

What we offer

A performance-based bonus structure unmatched anywhere in the industry. We combine our profits across desks, teams and offices into a global profit pool
The opportunity to work alongside best-in-class professionals from over 50 different countries
25 paid vacation days in your first year, increasing to 30 from your second year onwards
Training opportunities, discounts on health insurance, and fully paid first-class commuting expenses
Extensive office perks, including breakfast, lunch and dinner, world-class barista coffee, in-house physio and chair massages, organized sports and leisure activities, and Friday afternoon drinks
Training and continuous learning opportunities, including access to conferences and tech events
Competitive relocation packages and visa sponsorship where necessary for expats

Fulltime

Select Country

RF Integration and Test Engineer

Job Description

Job Responsibility

Requirements

Nice to have

Looking for more opportunities?