Rf Engineering Intern Job at Baesystems (Nashua)

Radio Frequency (RF) Test Engineer

Silvus Technologies is seeking an RF Test Engineer who will report to the Direct...

Location

United States , San Diego

Salary:

100000.00 - 140000.00 USD / Year

Silvus Technologies (International)

Expiration Date

Until further notice

Requirements

Bachelor of Science degree in Electrical Engineering
Minimum 2 years of relevant multi-GHz RF hardware test experience
Hands-on experience using RF test equipment such as Spectrum Analyzers, Signal Generators, Vector Network Analyzer etc.
Strong troubleshooting skills
Excellent written and verbal communication skills
Experienced with component-level RF circuit characterization and optimization
Must be a U.S. Person (permanent resident or citizen)
Employment is contingent upon the successful clearance of a background check

Job Responsibility

Using RF test equipment to evaluate system performance, evaluate compliance compatibility and troubleshoot operation issues
Carry out RF test execution and generate status and test reports
Define verification matrix and internal specifications of RF performance
Review test result data to ensure that actual performance meets expected requirements
Review and recommend improvements to existing test strategies
Recommend new test techniques and technologies to ensure system performance
Design test fixtures and calibrate test equipment
Understand proper use and handling of sensitive RF circuits and equipment
Rare local travel to other company locations, as required

Fulltime

Technical Systems Engineer - SME

The Sponsor is looking for a highly skilled Systems Engineer with proficiency co...

Location

United States , McLean

Salary:

Not provided

Arcfield

Expiration Date

Until further notice

Requirements

Must possess and be able to maintain a TS/SCI clearance with Polygraph
BS 12-15 years of experience, MS 10-13 years of experience, or PhD 10+ years of experience (preferred electrical engineering or other engineering degree)
Minimum of 10 years of experience with Sponsor or other related IC organization
At least 5 years of experience in engineering and/or a specialty field
Thorough understanding of systems engineering and in at least two of the various technical areas below: Radio-frequency and optical
Technical surveillance
In-building power systems
TEMPEST
Acoustic signals
Excellent engineering and design aptitude with a strong attention to detail is required

Job Responsibility

Identify and maintain awareness of sources of technical data to support intelligence analysis, obtain and maintain access to such data, and develop and perform queries against those sources
Provide initial risk/insider threat analysis using both qualitative and quantitative approaches, develop analytic judgments such as relevance or vulnerabilities, and prepare briefings/reports documenting the methodology used and the results obtained
Discover and forecast new technologies and products advancing mission capabilities
Scout and perform marketing analysis assessing the potential of new products, and support technology transfer and adoption
Develop and execute advanced security strategies and solutions, ensuring the organization's systems and data are protected against evolving threats
Recommend system enhancements to improve security deficiencies through the development, testing, and integration of network security threats
Implement network security measures including access controls, intrusion detection/prevention, and encryption
Provide independent CI assessment of projects regarding technical risk including risk definition, assessment, prioritization, and mitigation
Review technical challenges, propose recommended courses of action and document results
Provide technical expertise and a detailed understanding of current systems and potential system improvements

Fulltime

Engineer, System Design - Innovation Realization

Join a dynamic team of engineers with diverse expertise, driving innovation at t...

Location

United States , Bellevue

Salary:

74400.00 - 134100.00 USD / Year

T-Mobile

Expiration Date

Until further notice

Requirements

2 to 4 years of technical engineering experience in fast-paced environments
Proficiency in technical testing with industry-standard tools (eg
QXDM), including troubleshooting, and reporting
Practical, hands-on experience with cellular devices, computer technology, IP networking, as well as switching and routing
Proven track record with deploying, implementing, and supporting various technologies
Solid background in Radio Frequency (RF), digital communication, and wireless technologies
Hands-on experience with different operating systems – Linux, Red Hat, Windows
Coding experience with latest programming languages a plus – Python, Java, C#, C++
Proficiency with Microsoft Office applications, including Word, Excel, and PowerBI
Knowledge of artificial intelligence (AI) concepts and technologies, with an understanding of their applications in technical fields

Job Responsibility

Learn and apply T-Mobile’s cutting-edge 5G technologies
Work with cross-functional teams to design, test, evaluate and implement advanced technology solutions that show the power of 5G at marketing events
Support event execution nationwide, both remotely and on-site
Contribute to technology evaluation projects in laboratories and real-world environments
Utilize mobile video encoding and decoding systems to enhance live experiences
Engage with the latest mobile devices to implement and monitor the performance of new network features
Work with a broad range of internal and external teams, including marketing sponsorships, lab and network engineering teams, and innovation partners
Presents new ideas which improve an existing system/process/service. Question and express new perspectives based on independent study of the industry trends and benefits. Review current company processes, highlight questions, and explore process refinement
Supports engineering projects by active contribution to the application of systems engineering techniques
conducting tests and inspections for analysis purposes

What we offer

medical, dental and vision insurance
a flexible spending account
401(k)
employee stock grants
employee stock purchase plan
paid time off and up to 12 paid holidays
paid parental and family leave
family building benefits
back-up care
enhanced family support

Fulltime

Technical Support Engineer

The Technical Support Engineer provides 1st and 2nd level support to Dedrone by ...

Location

United States , Mesa; Sterling

Salary:

Not provided

Axon

Expiration Date

Until further notice

Requirements

Bachelor’s degree in computer science or a related field, or 5+ years relevant work experience preferred
Previous practical work experience in the field of customer support
Excellent troubleshooting skills at all levels to be able to identify and quickly resolve issues
Very good knowledge in networks and Linux
Strong sense of ownership and urgency
Ability to work well in a team and enjoy knowledge sharing
Excellent communication skills with the ability to provide advice to non-technically aware customers
Willing and able to travel
Good knowledge about consumer UAV protocols and standards
Basic knowledge and understanding of RF technology

Job Responsibility

Develop a complete understanding of the Airspace Security Solutions by Dedrone by Axon
Provide 2nd and 3rd level support for the Dedrone by Axon Product Family to field engineers and customers
Research and identify solutions to resolve software and hardware issues
Diagnosing and troubleshoot technical issues, including account setup and network configuration
Take ownership of customer issues reported and seeing problems through to resolution
Track internal and external requests and technical issues to resolution, within agreed time limits
Update, maintain and monitor our customer systems as a full service
Ensure all requests and issues are properly logged
Prioritize and manage several open issues at one time
Document technical knowledge in form of notes and manuals

What we offer

Competitive salary and 401k with employer match
Discretionary paid time off
Paid parental leave for all
Medical, Dental, Vision plans
Fitness Programs
Emotional & Mental Wellness support
Learning & Development programs
And yes, we have snacks in our offices

Fulltime

Rf Engineer

QTEC Aerospace is seeking an RF ENGINEER to join our team of professionals in Hu...

Location

United States , Huntsville

Salary:

Not provided

QTEC Aerospace

Expiration Date

Until further notice

Requirements

Bachelor of Science degree in Electrical Engineering with 12 years of related experience with a focus on RF, communications systems, or electromagnetics
Master of Science in Electrical Engineering with 10 years of related experience
Ph.D. in Electrical Engineering with 8 years of related experience
Minimum of 8 years of professional experience supporting RF and/or communications systems development, integration, or test within a complex engineering or acquisition environment
Demonstrated experience working with hardware development programs, including the ability to review and assess supplier designs, technical documentation, and performance data without direct ownership of detailed hardware design
Strong understanding of antenna theory and communications system fundamentals (e.g., EVM, Modulation / Demodulation, FEC), including modem architecture, digital signal processing concepts, RF front-end components, and board-level integration considerations
Working knowledge of board-level electrical issues, including power & signal integrity, EMI/EMC considerations, grounding, and shielding, with the ability to identify risks and assess mitigation approaches
Experience applying systems engineering principles, including requirements development and flow-down, interface definition, verification and validation, configuration control, and technical risk management
Demonstrated ability to troubleshoot complex system-level issues by analyzing hardware, software, and RF interactions, coordinating root-cause investigations with suppliers and cross-functional teams
Excellent verbal and written communication skills with proven ability to communicate technical concepts clearly and effectively to both technical and non-technical stakeholders, including customer-facing briefings and participation in formal technical reviews

Job Responsibility

Provide end-to-end technical oversight across the RF / Communications signal chain, from the modem through the RF front end and antenna subsystem
Support requirements development and flow-down, review architecture and interface definitions, evaluate integration approaches, and assess verification of test plans and results
Leverage prior hardware development experience to assess design trades, evaluate architectures, and ensure delivered solutions meet performance, reliability, and integration objectives
Regular customer-facing engagement, requiring briefings to communicate technical progress, system performance status, support requirements, test, and architectural discussions with stakeholders
Translate complex technical information into clear, actionable insights for both internal leadership and the MDA customer

Fulltime

Senior RF Systems Engineer

Senior RF Systems Engineering Specialist – Satellite Communications. This role r...

Location

Canada , Ottawa

Salary:

110000.00 - 140000.00 USD / Year

Myticas Consulting

Expiration Date

Until further notice

Requirements

Master’s degree or higher in Electrical Engineering or a closely related field, with a focus on RF, antenna and microwave engineering, digital communications, or digital signal processing
Minimum of 10 years of relevant experience performing system-level RF or satellite communications engineering
Proven experience with digital communication systems, including spread-spectrum and single- and multi-carrier architectures
Strong background in modulation schemes such as PSK, APSK, and QAM
Direct experience with DVB-S2X, DVB-RCS2, and Adaptive Coding and Modulation techniques
Demonstrated capability in modelling RF communication systems using advanced tools such as MATLAB, Python, or equivalent environments
Strong collaborator who performs effectively in cross-functional engineering teams
Excellent written and verbal communication skills
Ability to clearly explain complex technical concepts to both technical and non-technical audiences
High standards for technical quality, accuracy, and documentation

Job Responsibility

Analyze and review RF link budgets, conduct system-level trade studies, and model signal impairments to evaluate overall communications performance
Collaborate closely with system architects, RF, antenna, and earth station engineers to allocate functionality between hardware and software while optimizing system performance
Develop and maintain high-level requirements and specifications for RF links, RF subsystems, and antenna systems, including managing requirement updates as designs evolve
Define, review, and assess test plans, procedures, and results to verify compliance with system specifications
Perform system performance characterization and analysis, maintaining detailed performance budgets for assigned system elements
Provide technical expertise in support of regulatory, spectrum coordination, and market access activities
Mentor junior engineers and serve as a technical resource for team members with developing domain expertise
Prepare and deliver technical presentations to internal and external engineering audiences as required

EE/CE/RF Engineering Intern

The Electronic Systems’ Hardware Engineering Department is seeking candidates fo...

Location

United States , Nashua

Salary:

49592.00 - 68993.00 USD / Year

Baesystems

Expiration Date

Until further notice

Requirements

Pursuing a BS Degree in Electrical or Computer Engineering with a focus and interest in RF Engineering (or equivalent) - No Computer Science
Eligible for DOD Security Clearance
MUST be able to relocate to Southern NH area
MUST have reliable transportation to and from assigned work site
MUST be able to work full 40-hour work week (Exceptions made for academics with advanced notice)
U.S. Citizenship Required
U.S. Person Required

Job Responsibility

Provide engineering support to the design, development and selection of basic hardware components utilizing fundamental electrical engineering principles, theories and techniques
Obtain working knowledge of company tools. Perform analyses and compile data for investigation by senior engineering personnel
Support the fabrication and testing of prototype or deliverable hardware. Document and present results
Support assemblers, technicians and inspectors for manufacturing issues on new and existing products
Develop or improve test fixtures, tooling, manufacturing processes and other procedures for new and existing product builds to reduce defects and improve yields
Participate in and document corrective action requests using 9 Step problem solving methodology
Other duties and responsibilities as required

What we offer

Networking with BAE Systems employees and interns
Informational sessions on a variety of topics exclusively for interns
Participate in BAE Systems' nationwide LEAP Internship & Co-op Program
Temporary employees can elect to participate in the 401(k) savings plan
Temporary employees working 20+ hours per week are eligible for medical benefits, the employee assistance program, and business travel accident insurance

Fulltime

RF Test & Integration Engineer

Our defense customer has a 2-year contract opening for an RF Test & Integration ...

Location

United States , Lexington

Salary:

60.00 - 90.00 USD / Hour

Connexion Systems & Engineering, Inc

Expiration Date

Until further notice

Requirements

RF hardware - communications radios, antenna fundamentals, COTS components
Test equipment - oscope, spec a, dmm, signal generator, dc power supply
Experience working on a Linux platform
ideally candidate has Linux scripting - bash, python and Linux networking experience
Background in RF theory
Bachelor's Degree in a STEM field
MS office

Job Responsibility

Test bed design and implementation with COTS and prototype components in test bed
Test design and definition, design and implementation of test automation and execution, RF and communication data collection, analysis and internal presentation. This is a collaborative effort with the program team
Define and execute tests
Define test procedures
Automate testing procedures
Execute both lab and OTA tests
Collect and organize rf and network performance data
Perform analysis and report internally via verbal and written methods

What we offer

medical insurance
401(k)
10 days of Paid Time off
11 paid holidays

Fulltime

Rf Engineering Intern

Baesystems

Location:
United States , Nashua

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
March 21, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Rf Engineering Intern

Radio Frequency (RF) Test Engineer

Technical Systems Engineer - SME

Engineer, System Design - Innovation Realization

Technical Support Engineer

Rf Engineer

Senior RF Systems Engineer

EE/CE/RF Engineering Intern

RF Test & Integration Engineer

Rf Engineering Intern

Baesystems

Location:United States , Nashua

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:March 21, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Rf Engineering Intern

Radio Frequency (RF) Test Engineer

Technical Systems Engineer - SME

Engineer, System Design - Innovation Realization

Technical Support Engineer

Rf Engineer

Senior RF Systems Engineer

EE/CE/RF Engineering Intern

RF Test & Integration Engineer

Location:
United States , Nashua

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
March 21, 2026