CrawlJobs Logo

RF Electronics Technician

redwirespace.com Logo

Redwire Space

Location Icon

Location:
United States , Longmont

Category Icon
Category:
IT - Software Development

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

40.00 - 52.00 USD / Hour
Save Job
Save Icon
Apply Position

Job Description:

This role will be responsible for electronics assembly, testing, and verification at our Longmont facility, as well as participating in laboratory and bench testing of active and passive antennas and microwave circuits. We are building active and passive RF systems for new space-based communications architectures. You will interface with the project design and operations teams to assist in board bring-up, rework and testing.

Job Responsibility:

  • Provide input for work instructions and procedures for electronics soldering, assembly and testing
  • Review and interpret complex technical schematics, ensuring accuracy during the build, assembly and testing phases
  • Perform complex soldering and rework, including surface mount assembly for components as small as 0402, with proficiency in handling a wide variety of package types (e.g., QFN, QFP, TSOP, through hole connectors, etc.) under a microscope
  • Build and test multi-wire cable harnesses, including developing Interface Control Documents (ICDs) and conducting thorough verification testing
  • Participate in the assembly and testing of RF electronics hardware
  • Perform troubleshooting using Test Measurement and Diagnostic Equipment (TMDE), such as vector network analyzers, spectrum analyzers, signal generators, logic analyzers, oscilloscopes, and digital multi-meters
  • Familiarity with reading electrical and RF schematics
  • Perform integration of electronic components in support of rapid prototyping requirements

Requirements:

  • Bachelor's degree in a related field is preferred
  • relevant experience may be substituted for education
  • 8+ years of direct technical experience with electronic systems, including analog, digital, and RF subsystems
  • Strong hands-on experience with RF circuits and systems
  • Experience with soldering & de-soldering using rework tools, such as hot tweezers, hot plates, hot air rework stations and reflow ovens
  • Understanding of, and experience working with, high reliability products within a quality management system
  • Excellent manual dexterity with the ability to handle small parts and fasteners, including sizes as small as #0-80
  • High standard of quality workmanship with attention to detail in assembly, testing, and documentation
  • One of the following certifications: J-001 for soldering, or IPC-6018 or IPC-6010

Nice to have:

  • Strong problem-solving skills and the ability to provide intuitive and timely solutions for prototype production
  • Extensive experience working with antennas, antenna measurements, and RF/microwave circuits
  • Ability to multitask between soldering, harness building, and system testing in a fast-paced environment
  • Assist in the design of RF PCB’s and electronics
  • Gather, maintain, format, compile, and analyze technical data
  • Familiarity with schematic and layout design in Altium Designer
  • IPC JSTD-001 w/Space addendum, IPC 620 – Harnessing, IPC 7711/7721 CIS - Soldering rework
What we offer:
  • Highly competitive benefits package
  • Commitment to core values of Integrity, Innovation, Impact, Inclusion, and Excellence

Additional Information:

Job Posted:
March 25, 2026

Work Type:
On-site work
Icon
Redwire Space - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for RF Electronics Technician

Senior RF Technician

The Senior Radio Frequency (RF) Technician is responsible for troubleshooting, r...
Location
Location
United States , Middletown
Salary
Salary:
60000.00 - 80000.00 USD / Year
nuwaves.com Logo
NuWaves RF Solutions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • U.S. Citizenship is a requirement
  • Obtain J-STD-001 Certification
  • Have a working knowledge of various RF and other electronic test equipment
  • Efficiently test and troubleshoot new circuit designs
  • Mentor less experienced technicians
Job Responsibility
Job Responsibility
  • Troubleshooting, repairing, and testing a wide range of RF and digital systems, subsystems, and components
  • Work independently and take high-level direction from engineers
  • Respond quickly to customer needs and maintain flexibility while still achieving quality outputs
  • Develop soldering skills
  • Efficiently test and troubleshoot new circuit designs
  • Mentor less experienced technicians
Read More
Arrow Right

Electronics Technician II (Radar Technician II)

The Electronics Maintenance Technician II (Tech II) supports maintenance, repair...
Location
Location
United States , Fairbanks
Salary
Salary:
41.57 USD / Hour
Arcata Associates, Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or equivalent
  • technical training in electronics required
  • 2-4 years of experience in electronics maintenance, repair, or operations
  • Familiarity with Radar and High-Power transmitters or similar systems preferred
  • Ability to interpret manufacturers' manuals, schematics, and technical documentation to solve routine problems
  • Proficiency with electronic test equipment, including spectrum analyzers, multi-meters, oscilloscopes, and signal generators
  • Strong understanding of AC/DC circuit interrelationships and judgment in planning work sequences
  • Ability to follow Air Force TOs and OEM standards
  • Strong communication and teamwork skills
  • Eligible for DoD security clearance. (Must be US Citizen)
Job Responsibility
Job Responsibility
  • Perform maintenance activities including periodic, scheduled, unscheduled, and preventative maintenance following TOs and OEM documentation
  • Troubleshoot and resolve routine electronic issues using manufacturers' manuals and advanced technical knowledge
  • Replace components, wire circuits, and repair more complex electronic systems with limited supervision
  • Operate and prepare threat systems, including radars and supporting equipment, for training events, ensuring threat-faithful operations during JPARC missions
  • Use testing instruments such as spectrum analyzers, digital multi-meters, oscilloscopes, and signal generators to diagnose and verify system functionality
  • Plan work sequences, select appropriate tools, and ensure maintenance tasks are compliant with accepted practices
  • Maintain job completion logs and system reports
  • Track, manage, and maintain sufficient spares inventory to ensure operational readiness
  • Interface with Air Force depot systems to report on supported threat systems and ensure accurate status updates
  • Submit reports including Proposed Spare Parts Lists and Inventory/Utilization Data
What we offer
What we offer
  • $6000 Annual Cold Weather Bonus
  • Fulltime
Read More
Arrow Right

Satellite Production Technician, Avionics

Build and test satellite hardware accurately, safely, and consistently to specif...
Location
Location
Finland , Espoo
Salary
Salary:
Not provided
iceye.com Logo
ICEYE
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Hands-on experience with electronics qualification, verification, or production testing
  • Ability to plan and execute functional tests including test setup, instrumentation, and execution
  • Strong practical skills using electronic and RF lab equipment: Oscilloscopes, Spectrum analyzers, RF signal generators, VNAs (basic use)
  • Experience with PCBA inspection, troubleshooting, and rework support
  • Solid understanding of power, digital, and mixed-signal electronics
  • Fundamental understanding of RF concepts and interactions between analog, digital, and RF circuitry
  • Ability to analyse test data, identify failures or non-compliances, and support root-cause analysis
  • Experience creating and maintaining test procedures, test reports, and production documentation
  • Ability to build and maintain test setups, jigs, or fixtures for repeatable testing
  • Basic ability to create or modify automation scripts (e.g. Python) to support production or testing workflows
Job Responsibility
Job Responsibility
  • Build and test satellite hardware accurately, safely, and consistently to specification
  • Assemble, inspect, and test satellite hardware according to defined procedures and quality standards
  • Ensure reliable and repeatable production outcomes
  • Work closely with engineers and quality teams
  • Follow instructions precisely
  • Report issues clearly
  • Contribute to a safe, organized, and efficient production environment
  • Satellite electronics are qualified and verified reliably, meeting performance, quality, and reliability requirements with minimal rework
  • Production and qualification risks are identified early and driven to resolution, protecting satellite build schedules and system integrity
  • Verification tooling, automation, and documentation enable repeatable, scalable testing, remaining audit-ready at all times
What we offer
What we offer
  • A job that matters in a dynamic Defence Technology and Earth Observation environment with a scale-up approach
  • An independent role with a supportive and diverse work environment
  • Occupational healthcare, occupational, and accident insurance
  • A yearly benefit budget to spend as you wish (i.e. on sport, transport, bike benefit, wellness, lunch, etc.)
  • Phone subscription with iPhone of choice
  • Relocation support (i.e. flight tickets, accommodation, relocation agency support)
  • Time for self-development, research, training, conferences, or certification schemes
  • Inspiring and collaborating offices and silent workspaces enable you to focus
  • Fulltime
Read More
Arrow Right

Production Test Technician 3

Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutio...
Location
Location
Mexico , Ixtlahuacán de los Membrillos
Salary
Salary:
Not provided
sanmina.com Logo
Sanmina
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Technician or Electronics Engineer or related
  • Minimum 2 to 4 years of related experience in the electronics industry as a diagnostic / test technician or similar
  • Basic English
  • Basic Knowledge of Programming Labview, TestStand, Programming in C
  • Computer Architecture
  • Hardware management
  • Knowledge in general electrotechnology, RF, Optical circuits and schemes
  • Multimeter Handling, Oscilloscope, Signal Analyzer
Read More
Arrow Right

Electronics Technician II

The Electronics Technician II will support operations and maintenance of the Mul...
Location
Location
United States , Dugway
Salary
Salary:
29.59 USD / Hour
Arcata Associates, Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School graduate or High School equivalency
  • Graduate from an accredited two-year technical school with courses in Math, Basic Electronics, and Microwave Theory or military equivalent training with emphasis on Comm or RF disciplines
  • At least four years of hands-on experience as a technician operating and maintaining digital and analog equipment resulting in an in-depth knowledge of systems theory of operation
  • In-depth knowledge of: Electronics theory and the test equipment used for maintenance and repair of equipment with the proven ability to troubleshoot to the component level and make repairs
  • Ability to: Communicate effectively in both oral and written form
  • Establish and maintain successful work relationships with those contacted in the performance of this position
  • Analyze data, resolve problems and make decisions independently
  • Work in a team environment
  • Work under deadlines
  • Use a computer to input and retrieve information and data
Job Responsibility
Job Responsibility
  • Perform routine to complex preventive and remedial maintenance on assigned systems and associated electronic equipment to the component level
  • Perform basic fabrication and/or installation tasks for the construction of mechanical and electronic assemblies for electronic equipment using detailed technical documentation, data and procedures
  • Install, operate, set up and launch Smokey Sam launchers and rockets to meet mission requirements
  • Operate and maintain the threat systems, subsystems and ancillary support units
  • Track and input all maintenance and property management information in Maximo
  • Maintain operational logs and mission summary reports, and enter status, repair and utilization information in the required AF equipment tracking systems
  • Construct and fabricate targets, reflectors and aim points
  • Service and repair infrared targets as necessary
  • Performs other related duties as required by management to include supporting other work centers during surges
What we offer
What we offer
  • Medical, Dental, Vision, 401K and much more
  • Fulltime
Read More
Arrow Right

Electronics Technician I

Electronics Technician I is accountable to the Aeronautical Tracking Facility (A...
Location
Location
United States , Edwards AFB
Salary
Salary:
35.69 USD / Hour
Arcata Associates, Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Formal education in a relevant field and have demonstrated technical abilities
  • One year or more experience is desirable
  • Excellent customer service skills
  • Computer system literacy
  • Ability to effectively use desktop Microsoft applications such as Word, Excel, Power Point, Visio and Outlook
  • Technical familiarity with the equipment operated and maintained at the DATR or similar equipment is desired
  • Ability to read, write and understand English
  • Ability to successfully complete the NASA soldering course
  • Ability to obtain and maintain a Government Secret Security Clearance
  • Must possess a valid driver's license
Job Responsibility
Job Responsibility
  • Perform real-time operations, including mission preflight configuration and checkout
  • Assist with performing preventative and corrective maintenance on all hardware used for range tracking and mobile systems located in the Dryden Aeronautical Tracking Range (DATR) facility at the NASA Armstrong Flight Research Center
  • Troubleshoot to component level using digital voltmeters, oscilloscopes, power meters and other relevant test equipment
  • Fabricate, assemble and integrate components, systems and test devices according to configuration control requests
  • Maintain equipment history logs to track maintenance activities
  • Perform other related duties as required by management to include supporting other work centers during surges
  • Assist with general housekeeping of the work area
  • May be required to support safety, environmental or tower climbing activities
What we offer
What we offer
  • Medical, Dental, Vision, 401K and much more
  • Fulltime
Read More
Arrow Right

Fixed & Mobile Threat System Electronic Technician

TDXi has a need for several Fixed & Mobile Threat System Electronic Technicians....
Location
Location
United States , Eielson AFB
Salary
Salary:
Not provided
tdxcorp.com Logo
TDX
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree in technical discipline or equivalent military training, or minimum ten (10) years' experience at journeyman level
  • US Citizen // Top Secret Clearance or ability to obtain is required
  • Applicants must have a valid state driver's license
  • Ability to read, analyze, and apply knowledge of both electrical and mechanical schematics
  • This job requires the physical capability to lift, maneuver, and carry weighted objects involving individual or team manual lift or hoist in a variety of environments, including shop, warehouse, bay, and tower
Job Responsibility
Job Responsibility
  • Preventative maintenance on the threat systems
  • Corrective maintenance on the threat systems
  • Responsible for quality compliance, safety, continuous improvement and confirm any other contractual obligations are met with regards to the threat systems
  • Maintain and review technical manuals
  • Maintain and manage all tools and test equipment
  • Responsible to manage Spare equipment list and work with logistics manager
  • Requirement to travel to remote locations with occasional overnights
  • Ensure compliance with TDXi's Quality Control and Safety Programs
  • Other duties as assigned by the Program manager
What we offer
What we offer
  • health, dental, vision and 401K to full-time employees
  • Fulltime
Read More
Arrow Right

Electronics Maintenance Technician II

The Electronics Maintenance Technician II (Tech II) supports maintenance, repair...
Location
Location
USA , Fairbanks
Salary
Salary:
41.57 USD / Hour
Arcata Associates, Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma or equivalent
  • technical training in electronics required
  • 2-4 years of experience in electronics maintenance, repair, or operations
  • Familiarity with Radar and High-Power transmitters or similar systems preferred
  • Ability to interpret manufacturers' manuals, schematics, and technical documentation to solve routine problems
  • Proficiency with electronic test equipment, including spectrum analyzers, multi-meters, oscilloscopes, and signal generators
  • Strong understanding of AC/DC circuit interrelationships and judgment in planning work sequences
  • Ability to follow Air Force TOs and OEM standards
  • Strong communication and teamwork skills
  • Eligible for DoD security clearance
Job Responsibility
Job Responsibility
  • Perform maintenance activities including periodic, scheduled, unscheduled, and preventative maintenance following TOs and OEM documentation
  • Troubleshoot and resolve routine electronic issues using manufacturers' manuals and advanced technical knowledge
  • Replace components, wire circuits, and repair more complex electronic systems with limited supervision
  • Operate and prepare threat systems, including radars and supporting equipment, for training events, ensuring threat-faithful operations during JPARC missions
  • Use testing instruments such as spectrum analyzers, digital multi-meters, oscilloscopes, and signal generators to diagnose and verify system functionality
  • Plan work sequences, select appropriate tools, and ensure maintenance tasks are compliant with accepted practices
  • Maintain job completion logs and system reports
  • Track, manage, and maintain sufficient spares inventory to ensure operational readiness
  • Interface with Air Force depot systems to report on supported threat systems and ensure accurate status updates
  • Submit reports including Proposed Spare Parts Lists and Inventory/Utilization Data
What we offer
What we offer
  • $6000 Annual Cold Weather Bonus
  • Fulltime
Read More
Arrow Right