CrawlJobs Logo

Rework Technician

herbrucks.com Logo

Herbruck Poultry Ranch

Location Icon

Location:
United States , Saint Cloud

Category Icon
Category:
Manufacturing

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

27.25 - 31.86 USD / Hour
Save Job
Save Icon
Apply Position

Job Description:

Responsible for troubleshooting and repair of through-hole and SMT electronic assemblies down to component level using bench top electronic instruments. Responsible for analysis of failures that occur in manufacturing or during production processing to determine the cause of failure to prevent future occurrence. Responsible for quality assurance and documentation. Relies on schematics, drawings, specification, and other documentation from engineering along with pre-established guidelines to perform job functions. Works without immediate supervision.

Job Responsibility:

  • Performs troubleshooting, failure analysis rework of electronic assemblies using bench-top test equipment, custom test beds, and automated test systems in compliance with quality assurance policies and methodologies.
  • Repair through-hole and SMT electronic assemblies in accordance with standards industry standards as interpreted by Engineering Department
  • Inspect, solder and rework by IPC Class 2 Standards (Thru-hole and SMT components), as needed.
  • Ability to use a microscope to perform inspection and rework, as needed.
  • Troubleshoot failed electronic assemblies and identify rework required for production rework operators.
  • Support SMT rework operators on techniques, materials, and processes.
  • Communicate problems to engineering and/or production personnel as appropriate.
  • Participate in continuous improvement. Recommend improvements to product flow and throughput, work sequences, test processes and debug techniques. Document as required.
  • Maintains a clean, safe, work environment and follow all published/posted safety standards.

Requirements:

  • In-depth understands of electronic theory, both digital and analog
  • Proficient in test measurement and troubleshooting techniques on electronic assemblies/subassemblies in a manufacturing environment involving Printed Circuit Boards (PCBs)
  • Experience with bench-top test equipment (DMM, oscilloscope, power supply, etc.)
  • Proficient in skills needed to rework SMT PCB defects.
  • Interpret, and comprehend schematics, mechanical drawing, data sheets, functional specifications, and block diagrams.
  • Knowledge of quality standards and production techniques
  • Demonstrates problem solving skills and the ability to develop creative solutions.
  • Effective interpersonal skills
  • Effective multitasking skills and ability to take on additional responsibilities as required.
  • Effective organization and prioritization skills
  • Works individually and in team environment
  • Able to work overtime when needed.
  • 2-4 years of experience in test and repair of complex electronic assemblies and systems to component level.

Nice to have:

  • Proficiency in Microsoft Excel and Word is preferred.
  • Two-year technical degree or equivalent combination of education and experience in related field.
What we offer:
  • medical
  • dental
  • vision
  • paid vacation
  • 401k (up to 4% match)
  • Health Savings Account (with company contribution)
  • wellbeing program
  • product purchase discounts

Additional Information:

Job Posted:
February 20, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Herbruck Poultry Ranch - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Rework Technician

Engineering Technician

Engineering Technician for Repair area will be working on the creation and debug...
Location
Location
United States , Aguadilla
Salary
Salary:
Not provided
https://www.hpe.com/ Logo
Hewlett Packard Enterprise
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Technical Associate's degree or bachelor degree Science in Technology of Electronic or Mechanical Engineering
  • 6+ years of experience
  • Knowledge and/or Experience with PCA and PCB rework
  • Knowledge and/or Experience with thermocouple management
  • Working knowledge in the field of electro mechanical technology and software
Job Responsibility
Job Responsibility
  • Performs repair and maintenance associated with manufacturing and assembly
  • Troubleshoots problems in non-functioning equipment
  • Dismantles, adjusts, repairs and assembles equipment according to plans, blueprints, operating or repair manuals, and/or rough sketches or drawings
  • May perform equipment modification as directed by test/manufacturing engineers
What we offer
What we offer
  • Health & Wellbeing
  • Personal & Professional Development
  • Unconditional Inclusion
  • Fulltime
Read More
Arrow Right

Electrical Rework Technician

We are seeking an Electrical Rework Technician to own PCBA rework, micro-solderi...
Location
Location
United States , San Jose
Salary
Salary:
30.00 - 50.00 USD / Hour
figure.ai Logo
Figure
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 5+ years of professional experience in electronics soldering and PCBA rework
  • Extensive hands-on experience with fine-pitch and high-density PCBAs
  • Proven expertise in micro-soldering under microscope
  • Strong understanding of PCB construction, component packages, and thermal behavior
  • Ability to consistently produce clean, reliable, and inspectable rework
  • High attention to detail and pride in workmanship
  • Comfortable working independently on high-value, time-critical hardware
Job Responsibility
Job Responsibility
  • Perform precision soldering and rework on complex PCBAs to high workmanship standards
  • Execute advanced micro-soldering tasks, including: Fine-pitch SMD components, High pin-count connectors, QFN, LGA, and BGA rework (including reflow and reballing)
  • Diagnose and repair damaged pads, traces, vias, and connectors
  • Support engineering debug by implementing board modifications, ECOs, and bodge rework
  • Work from schematics, board layouts, and engineering guidance to execute accurate rework
  • Document rework actions, common failure modes, and lessons learned
  • Help define, improve, and standardize rework procedures and workmanship guidelines
  • Train and support technicians and engineers on soldering best practices
  • Maintain soldering tools, microscopes, rework stations, and consumables
  • Collaborate closely with Electrical Engineering, Hardware Integration, and Manufacturing teams
  • Fulltime
Read More
Arrow Right

Testing and rework technician

Super Micro is looking for a skilled Testing & Rework Technician who enjoys work...
Location
Location
Netherlands , 's-Hertogenbosch
Salary
Salary:
2650.00 - 2900.00 EUR / Month
https://www.randstad.com Logo
Randstad
Expiration Date
January 06, 2027
Flip Icon
Requirements
Requirements
  • 2 years experience with computers, hardware, and operating systems
  • 1 year experience with Windows Office (Outlook, Word, Excel)
  • good technical insight and strong visual inspection skills
  • able to lift and move heavy products (up to 10 kg)
  • understand common interfaces (USB, LAN, VGA, etc.) and their functions
  • have your own transport to get to Super Micro
  • have your own housing
Job Responsibility
Job Responsibility
  • Perform testing and rework of PCBA (Printed Circuit Board Assembly) products
  • Conduct software rework, ECO, BIOS, and firmware upgrades
  • Perform testing of motherboards, back planes, and AOCs
  • Document inspection results and provide feedback on defects to the quality team
  • Follow standard testing procedures and maintain efficiency in a fast-paced production environment
  • Ensure compliance with company and production department policies and procedures
  • Collect and analyze data for process improvements
What we offer
What we offer
  • Travel allowance of € 0.23 per km
  • Pension starting from day one
  • Unlimited free coffee, tea, and fruit during breaks
  • Work in a clean, structured, and well-maintained environment
  • 8.33% holiday allowance and 25 days of leave (full-time basis)
  • Stable, long-term job with the chance of a permanent contract
  • Friendly, international team and relax vibe
  • Free sandwiches every day
  • Annual company events such as the Midsummer celebration and the Christmas gathering
  • Fulltime
Read More
Arrow Right

PCB Rework Technician

We are seeking a highly skilled PCB Rework Technician with advanced capabilities...
Location
Location
Taiwan , Taipei
Salary
Salary:
Not provided
etched.com Logo
Etched
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 5+ years of hands-on experience in PCB rework, including: Large BGAs (>70mm), QFNs, and fine-pitch ICs
  • Operating advanced rework systems for custom ASICs and high-power devices
  • Proficient in reworking and inspecting QFN, BGA, and 0402-size components
  • Experience with hot air/IR rework stations, microscopes, soldering irons, and large-area rework platforms
  • Skilled at reading and executing from engineering rework instructions, layout files, and schematics
  • Familiarity with IPC-A-610 and IPC-7711/21 rework and inspection standards
  • Excellent attention to detail, steady manual dexterity, and fine visual inspection capabilities
  • Comfortable working in fast-paced R&D environments with rapidly evolving requirements
Job Responsibility
Job Responsibility
  • Perform precision rework and reballing of large BGAs, including custom ASIC packages exceeding 70mm in size
  • Operate large-format BGA rework machines specifically designed for custom, high-pin-count ICs and ASICs, ensuring precise alignment and thermal control
  • Rework SMT and through-hole components down to 0402 packages with excellent quality and consistency
  • Read and interpret engineering documentation, ECNs, schematics, and BOMs to execute component swaps and modifications
  • Perform advanced rework techniques such as trace cuts, jumper wire additions, micro-soldering, and circuit rerouting
  • Inspect reworked assemblies using X-ray or AOI systems to ensure joint integrity and alignment
  • Maintain detailed rework documentation and communicate findings or design improvement opportunities to engineers
  • Collaborate with cross-functional teams to troubleshoot issues and support rapid hardware iteration cycles
What we offer
What we offer
  • Competitive compensation packages, including generous equity packages
  • Comprehensive insurance coverage and other top-of-market benefits
  • Fulltime
Read More
Arrow Right

Senior Electrical Engineer, Sustaining

As a member of the TASER Electrical Engineering Sustaining team, you will be res...
Location
Location
United States , Scottsdale
Salary
Salary:
Not provided
axon.com Logo
Axon
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Electrical Engineering
  • Six years of industry experience in electronics design and sustaining for mass-produced, handheld, embedded, battery-powered consumer devices
  • Expertise in identifying and implementing alternative electronic components or circuit design modifications to enhance performance, address obsolescence, and optimize supply chain efficiency for released mass-production electronics
  • Proficient in executing design changes across bill of materials, schematics, and layouts to support identified product changes/updates
  • Strong proficiency with basic discrete analog and digital circuit design (passive/active components, complex circuit analysis)
  • Demonstrated experience with component selection, circuit design, and verification testing in several of the following areas: Power supplies (SMPS, LDOs), microcontrollers, memory subsystems (FLASH, EEPROM), switches, connectors, communication interfaces (SPI, UART, I2C), indication LEDs, displays, LASERs, electromechanical transducers, hall effect sensors, inertial measurement units, accelerometers, protection circuitry (ESD, voltage, and current limiting components), discrete resistors/capacitors/inductors, rechargeable batteries and charging/balancing circuitry, RF subsystems (BLE, WiFi) for flex, rigid, and rigid-flex PCB designs
  • Strong hands-on expertise in electronics verification, characterization, and failure analysis, utilizing lab equipment such as oscilloscopes, power supplies, multimeters, custom test jigs and software related tools
  • Experience collaborating with laboratory technicians on circuit and component rework. Skilled in coordinating or performing component replacement and rework
  • hands-on soldering skills are a strong plus. Knowledgeable in rework processes, with the ability to execute directly or manage internal and external rework activities
  • Schematic design proficiency using industry leading design tools, including BOM development. Experience with Cadence/OrCAD is desired
Job Responsibility
Job Responsibility
  • Update in-market circuit designs to address component obsolescence, component changes, second-source requests, cost savings, and other post-launch design improvements for mass production electronics associated with TASER devices and accessories
  • Collaborate with cross functional engineering design teams, technology partners, and manufacturing teams to own electronics maintenance during the post launch lifecycle
  • Execute bench-level verification and performance evaluation of components and circuits using laboratory tools such as oscilloscopes, power supplies, multimeters, logic analyzers, and custom related test equipment and software tools
  • Perform debugging, failure analysis, and rework of electronic systems, circuits, and components to identify and confirm root cause of issues associated with updated design changes or RMA returns. This includes close collaboration with the failure analysis team to conduct CT scans on suspect assemblies and the use of functional circuit testers in production to validate final issue resolution
  • Using OrCAD schematic design tools, improve or modify embedded mixed-signal electronic circuitry that integrates high voltage power supply circuitry, microcontrollers, flashlight/indication/display/LASER circuitry and drivers, memory devices (FLASH/EEPROM), switch-mode and linear power supplies, batteries, high-speed and low-speed data interfaces, electromechanical transducers, and other discrete digital and analog components for flex, rigid, and rigid-flex PCB designs
  • Partner with PCB Design engineers to define, plan, implement, and inspect printed circuit board layout updates using Allegro and other layout tools
  • Develop test methods, execute system and component-level verification, and lead test planning efforts to evaluate electronics design changes
  • Team with validation and other engineering teams to evaluate and document design update outcomes, test results, and related information, then present findings to management for review and further action
  • Update and help to finalize assembly drawings, bill of materials, Geber files, and other design documentation needed to support updated design change releases
  • Knowledge sharing, mentoring, and close collaboration with other team members and departments
What we offer
What we offer
  • Competitive salary and 401k with employer match
  • Discretionary paid time off
  • Paid parental leave for all
  • Medical, Dental, Vision plans
  • Fitness Programs
  • Emotional & Mental Wellness support
  • Learning & Development programs
  • snacks in our offices
  • Fulltime
Read More
Arrow Right

Senior Data Center Technician

As a Microsoft Senior Data Center Technician (DCT), you will demonstrate experti...
Location
Location
Italy , Milan
Salary
Salary:
Not provided
https://www.microsoft.com/ Logo
Microsoft Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Completed High/Secondary School, GED, an apprenticeship/vocational qualification, or equivalent experience and basic knowledge of computer hardware and components
  • Experienced in diagnostics, troubleshooting, route cause analysis of hardware deployments
  • Experience of Decommissioning and Upgrading hardware
  • A valid driver’s license
  • Ability to meet Microsoft, customer and/or government security screening requirements
  • This position will be required to pass the Microsoft Cloud background check upon hire/transfer and every two years thereafter
  • Verification of citizenship or other protected status to meet legal requirements of the role
Job Responsibility
Job Responsibility
  • Apply advanced diagnostic and troubleshooting expertise to quickly identify the cause(s) of issues
  • Decommission hardware for complex changes and/or systems with complex interactions following standard procedures
  • Delegate hardware installation, deployment, and/or replacement work to technicians while providing expert guidance for preparing, staging, setting up, and performing startups and shutdowns
  • Ensure quality execution as defined by organizational standards, coordinating downtime, and keeping relevant stakeholders informed of work status to minimize downstream rework
  • Assist and provide guidance to technicians to complete challenging or complex tasks and escalate issues as needed
  • Ensure that technicians are performing post-execution quality checks and verifying that grounding, staging, labeling, and cabling are set up in compliance with safety protocols, deployment standards, and planned Network Design Tasks (NDTs)
  • Verify security compliance for decommissions and processes data-bearing devices for destruction
  • Maintain an awareness of Key Performance Indicators (KPIs) through dashboards and/or monthly performance discussions
  • Train and mentor technicians through on-the-job training and by providing direct guidance on specific tasks
  • Attend, conduct, or assist in conducting daily safety briefings, completes required safety training, provides guidance to technicians to facilitate compliance with safety procedures
What we offer
What we offer
  • Training and growth opportunities including Career Rotation Programs, Diversity & Inclusion training and events, and professional certifications
  • Fulltime
Read More
Arrow Right

Senior Data Center Technician

As a Microsoft Senior Data Center Technician (SDCT), you will demonstrate expert...
Location
Location
Germany , Frankfurt
Salary
Salary:
Not provided
https://www.microsoft.com/ Logo
Microsoft Corporation
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma, GED, or equivalent and basic knowledge of computer hardware and components AND demonstrated experience supporting IT equipment or related technology
  • Ability to meet Microsoft, customer and/or government security screening requirements
  • Microsoft Cloud Background Check: This position will be required to pass the Microsoft Cloud background check upon hire/transfer and every two years thereafter
Job Responsibility
Job Responsibility
  • Apply advanced diagnostic and troubleshooting expertise to quickly identify the cause(s) of issues to quickly identify the cause of issues
  • Decommission hardware for complex changes and/or systems with complex interactions (e.g., upgrading entire racks) following standard procedures
  • Delegate hardware installation, deployment, and/or replacement work to technicians while providing expert guidance for preparing, staging, setting up, and performing startups and shutdowns (e.g., racks, hard drives, switches)
  • Ensure quality execution as defined by organizational standards, coordinating downtime, and keeping relevant stakeholders informed of work status to minimize downstream rework
  • Assist and provide guidance to technicians to complete challenging or complex tasks and escalate issues as needed
  • Ensure that technicians are performing post-execution quality checks and verifying that grounding, staging, labeling, and cabling are set up in compliance with safety protocols, deployment standards, and planned Network Design Tasks (NDTs)
  • Verify security compliance for decommissions and processes data-bearing devices for destruction
  • Maintain an awareness of Key Performance Indicators (KPIs) through dashboards and/or monthly performance discussions
  • Train and mentor technicians through on-the-job training and by providing direct guidance on specific tasks
  • Attend, conduct, or assist in conducting daily safety briefings, completes required safety training, provides guidance to technicians to facilitate compliance with safety procedures (e.g., Personal Protective Equipment (PPE) usage, equipment use, lifting, electrical hazards, ladder/rolling stair use)
What we offer
What we offer
  • Training and growth opportunities including Career Rotation Programs, Diversity & Inclusion training and events, and professional certifications
  • Fulltime
Read More
Arrow Right

Operations Manager

The Operations Manager is responsible for overseeing all day-to-day activities a...
Location
Location
United States , Sturgis
Salary
Salary:
Not provided
harbingermotors.com Logo
Harbinger Motors
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 8+ years of experience in manufacturing, automotive, or EV operations
  • at least 5 years in a leadership or supervisory role
  • Strong understanding of vehicle repair, rework, or assembly processes
  • Demonstrated ability to lead teams in a fast-paced, hands-on environment
  • Skilled in problem-solving, root cause analysis, and process improvement
  • Excellent communication, organizational, and decision-making skills
  • Proficiency with ERP/MES systems, and production tracking tools
  • Bachelor’s degree in Engineering, Operations Management, or related field preferred but not required
  • equivalent experience accepted
Job Responsibility
Job Responsibility
  • Lead and manage a team of technicians and team leads performing electric vehicle repairs and rework
  • Ensure all repair operations meet safety, quality, and timing standards
  • Develop and maintain standard operating procedures (SOPs), work instructions, and repair documentation
  • Plan and coordinate daily shop operations including staffing, scheduling, material flow, and work assignments
  • Partner with Quality and Engineering to identify root causes and implement corrective actions for product and process issues
  • Track and report key performance indicators (KPIs) such as throughput, first-time quality, rework rate, and labor efficiency
  • Promote a culture of accountability, continuous improvement, and team development
  • Oversee facility logistics including tooling, equipment maintenance, and workspace organization
  • Collaborate with HR and leadership to recruit, train, and evaluate team members
  • Support planning and execution of new repair programs or process changes
  • Fulltime
Read More
Arrow Right
Remote jobs Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog Salaries About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy