Retrofit Solutions Engineer Cabin Job at Airbus (Bangalore)

Retrofit Solutions Engineer Cabin

We are looking for a Retrofit Solutions Engineer A350 (d/f/m) within Airbus (Com...

Location

India , Bangalore

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Deep understanding in handling typical A350 design tools, such as CATIA V5, VPM, Pass V2 required
Existing delegation of Technical Approval Officers/Permit Holders in a relevant ATA chapter is a plus
Project Management skill is a plus
3 to 5 years as Cabin Retrofit Engineer or similar position
Degree in engineering or similar will be required
Completed technical apprenticeship (e.g. in aviation sector) with appropriate further training/education
Experience in the A350 Programme for 2 years
Maintenance Repair Overhaul (MRO) experience is welcome
Airbus (Mise au point) knowledge is a plus
Technical project management experience and proficiency in handling of typical design tools, such as CCD, CATIA V5, APS, 3DCOMM, PASS SSI, TAKSY/GILDA, CIRCE and ICC are required

Job Responsibility

Coordinate all design activities in terms of cost, time and quality
Check and release design drawings (if necessary delegations are available)
Prepare and to follow-up of all relevant certification documents e.g. Full-TRS, MAS, ICS and supporting documents
Analyze PRE and POST status of the aircraft relevant to the applicable ATA chapters
Manage and validate internal and external engineering work packages
Provide engineering data to Production, supply chain and other involved internal stakeholders
Participate in technical meetings with internal and external stakeholders
Provide Service Bulletin embodiment support remote / on-site (worldwide)
Support airworthiness activities and Safety Management System
Contribute to Design activities for Retrofit Solutions

Fulltime

Cabin System Retrofit Solution Engineer

Airbus Commercial Aircraft is looking for a Cabin System Retrofit Solution Engin...

Location

France , Toulouse

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Education in aeronautical domain in mechanical/electrical systems installation or structure
3 to 5 years experience mechanical/electrical systems installation or structure
Experience in Aircraft Design (in Design Office but especially well appreciated on retrofit solutions) on legacy aircraft programs (DD/A320/A330 family)
Experience in project management
Good communication skills
Professional (Technical purpose)/conversational level of English

Job Responsibility

During Acquisition phase: support the pull of experienced people to analyse Technical Offers by investigating & searching engineering solutions on your area of expertise
After customer acceptance: contribute to cabin conversions projects
accountable for engineering activities during the production phase
responsible to manage French activities for cabin conversions
contributing to the technical scope & validating the detailed planning for French perimeter
being the engineering responsible for French portion of cabin contributions in front of all stakeholders
ensuring project management of your contribution deliverables
elaborating SB preparation activities for your perimeter
filling in the MP intent instruction for the engineering portion you are responsible for
elaborating the list of impacts and the Interface table from the Technical Offer

What we offer

Financial rewards: Attractive salary, agreements on success and profit sharing schemes, employee savings plan abounded by Airbus and employee stock purchase plan on a voluntary basis
Work / Life Balance: Extra days-off for special occasions, holiday transfer option, a Staff council offering many social, cultural and sport activities and other services
Wellbeing / Health: Complementary health insurance coverage (disability, invalidity, death). Depending on the site: health services center, concierge services, gym, carpooling application
Individual development: Great upskilling opportunities and development prospects with unlimited access to +10.000 e-learning courses to develop your employability, certifications, expert career path, accelerated development programmes, national and international mobility

Fulltime

New

Retrofit Solutions Engineer

The Retrofit Solutions Engineer is responsible for the creation of specific modi...

Location

United States , Mobile Area

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

B.S. degree in engineering or related field
~1 year experience in an engineering classification
Technical understanding of aircraft cabin and avionics systems modifications
Excellent communication and negotiation skills
Ability to work effectively in a fast-paced and dynamic environment
Ability to understand and mentor principles within assigned discipline
Ability to interpret an extensive variety of technical aircraft topics
Excellent communication, coordination, and organization skills
Ability to inter-relate with and motivate diverse teams
Authorized to work in the US

Job Responsibility

Timely production of the Modification Proposal Technical Repercussion Sheet (MP/TRS) with pre and post-modification sketching
Retrieve/Create/Update/Check the aircraft drawings in Airbus engineering tool sets (manage subcontractor as applicable)
Build the Certification Dossier for the MAS (Modification Approval Sheet)
Prepare all elements required for the Service Bulletin writing phase, including "list of components" as needed and ensure all provided data are accurate
Provide specific design solutions to meet technical requirements for modifications
Ensure the Quality of the drafted Service Bulletin, including concurrent requirements cross-check
Provide remote or on-site assistance during the working parties and answer any Service Bulletin customer query as necessary
Act as a liaison between the engineering and service bulletin authoring team to ensure all level of technical discussions understood and respected by both parties

Fulltime

New

Static Stress Cabin for Head of Version and Retrofit

Airbus Commercial Aircraft is looking for a Static Stress Cabin for Head of Vers...

Location

France , Toulouse

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Graduate from engineering school
Experience in static stress
Knowledge of Airbus programs
Fluent in French and good in English
Willing to grow technical competences

Job Responsibility

Perform stress activities for primary structures justification for new cabin layouts including linefit (HoV) and retrofit (cabin upgrades and connectivity) for the all programs
Under the supervision of the Lead Engineers, technically follow-up the activities within this scope and liase with internal stakeholders (DOT leaders, Senior Engineers, CVE, Signators) and external stakeholders (Airworthiness, Airbus Atlantic, S/C, Extended Make VSM, Program) to ensure the quality and performance
Continously improve the process, way of working, technical solutions, etc. for the above scope
Follow the strategy Make/Buy that is defined by the Lead Engineers, organise and follow-up activities with Sub-contractors and Extended Make
Colloborate closely with Airbus Atlantic for HoV activities
Be part and the technical network within 1AFS by proactively participating in meetings / forums and promoting synergies across teams / skills / programs

What we offer

Attractive salary, agreements on success and profit sharing schemes, employee savings plan abounded by Airbus and employee stock purchase plan on a voluntary basis
Extra days-off for special occasions, holiday transfer option, a Staff council offering many social, cultural and sport activities and other services
Complementary health insurance coverage (disability, invalidity, death). Depending on the site: health services center, concierge services, gym, carpooling application
Great upskilling opportunities and development prospects with unlimited access to +10.000 e-learning courses to develop your employability, certifications, expert career path, accelerated development programmes, national and international mobility
Flexible working arrangements

Fulltime

New

Structure - Tolerancing Engineer

The Structures team at Airbus India is looking for an Overall Aircraft Toleranci...

Location

India , Bangalore

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Graduate / Post Graduate Engineer (Aerospace Engineering / Mechanical Engineering)
Knowledge of aircraft structure
Exposure to manufacturing of auto / aero components, installation and retrofit solutions
3 - 8 years experience
Ability to work independently & in a team, in a transnational environment
Ability to communicate effectively (oral, written & presentation)
Flexibility & adaptability to changing project scenarios and requirements
Manufacturing process knowledge
Aircraft Function, Operation & Processes
Cabin, Electrical & Mechanical System and Equipment Installation Design

Job Responsibility

1D, 2D or 3D Tolerance studies, formalization of tolerance report & drawing set, cascading functional requirements down to contributors. (Top down/Bottom up approach)
Achievement of cascade of tolerances in the drawing set by use of geometrical annotation respecting ISO 1101 or ASME Y14.5 standards
Define and implement contractual interchangeability requirements in the drawing set
Guarantee compliance with the Tolerancing/DVA rules in the whole aircraft development process
Understand Design principles from the perspective of 'Assembly & Manufacturing' (Interfaces & Capability)
To be able to recommend design changes and/or optimize manufacturing processes in order to mitigate the accumulation of elementary part tolerances
Understand & execute tolerance calculation using different Statistical approach

Fulltime

Ground Test Engineer

Airbus is seeking an experienced Ground Test Engineer to join the Production Fli...

Location

United States , Mobile

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Bachelor of Science degree in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science
Minimum 8 years’ experience in aeronautical company technical department and various ATA chapter
Federal Aviation Administration (FAA) or Type Certificate (TC) or European Union Aviation Safety Agency (EASA) Medical Class 2
Experience on Airbus A320 or A22
Familiarity with A220 and A320 systems, including avionics, cabin systems, and powerplants
Must hold an EASA, TCCA, or FAA Class 2 Medical and be able to perform duties as aircrew on a daily basis
Strong computer background, including MS Excel and Google Suite application experience (Docs, Sheets, Slides, Gmail)
Excellent communication and negotiation skills
Ability to work effectively in a fast-paced and dynamic environment
Ability to understand and mentor principles within assigned discipline

Job Responsibility

Execute ground production and acceptance tests
Prepare for and support the pilot during Rejected Takeoff (RTO) procedures
Perform in-flight cabin functional checks
Serve as Cabin Safety Crew during Customer Acceptance Flights, special missions, and demonstration flights
Conduct Static Tests, APU Runs, Engine Runs, and Taxi operations on A320 and A220 aircraft
Manage a diverse portfolio of customer accounts to ensure the delivery of retrofit solutions and scheduled maintenance services meets all cost, timeline, and quality benchmarks
Oversee the end-to-end lifecycle of customer queries, which includes dispatching requests to the appropriate departments and initiating technical approval forms
Proactively escalate risks or blocked queries to ensure timely resolutions
Provide technical expertise to cross-functional teams located across international sites
Direct on-site assistance for airline partners, focusing on the evaluation of maintenance programs and service bulletins

What we offer

Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”)
Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program
Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages
Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility
Support to work, connect and collaborate more easily and accessibly
Wherever possible, we support flexible working arrangements to stimulate innovative thinking

Fulltime

CATIA DMU Senior Software Engineer

Senior Software Engineer role focused on CATIA DMU activities for Airbus aircraf...

Location

India , Bengaluru

Salary:

Not provided

Sopra Steria

Expiration Date

Until further notice

Requirements

B Tech or BE degree
Minimum 2+ years of experience in AIRBUS Process, Methods and Tools
Hands on experience in CATIA V5/V6, PASS SSI, Enovia VPM, TreND, Context Builder, CADint, Taksy, Gilda, DPDS and Optegra
Sound knowledge in AIRBUS product structure and Configuration management process
Good technical knowledge of Aircraft Structures, Systems, Cabin & Cargo Layouts
Experience in Design and Quality check of AIRBUS Structural, Systems and Cabin/Interior components
Basic knowledge in Agile / SAFe methodologies
Ability to work with cross-functional teams
Very good communication and interpersonal skills

Job Responsibility

Working for aircraft like A350, A321 and A380 on GRM activities ATA 92 and FTI activities ATA 89
Select electrical harness protections like EMI, Electrical, Mechanical
Work on both retrofit and line fit solutions
Creation of product structure (ATA 92,89)
Experience with aircraft environment, mechanical and electrical structures harness design
Expertise in Catia V5 and knowledge in 3D part design and 2D drawing creation, Assembly Design, Harness wiring
Perform DMU(Digital Mock-up) Integration, design and drawing activities using AIRBUS methodologies
Support AIRBUS projects in DMU/M&T/CM bundles
Accountable for activity execution and closing of assigned responsibilities
Capture best practices, build knowledge repository & training materials

Fulltime

New

Pharmacy Technician

We’re building a world of health around every individual — shaping a more connec...

Location

United States , New York

Salary:

19.00 - 29.00 USD / Hour

CVS Health

Expiration Date

April 14, 2026

Requirements

Must be at least 16 years of age
Licensure requirements vary by state
Attention and Focus: The ability to concentrate on a task over a period of time without being distracted
Customer Service Orientation: Actively look for ways to help people, and do so in a friendly manner
Notice and understand customers’ reactions, and respond appropriately
Communication Skills: Use and understand verbal and written communication to interact with customers and colleagues
Actively listening by giving full attention to what others are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times
Mathematical Reasoning: The ability to use math to solve a problem, such as calculating day’s supply of a prescription
Problem Resolution: Is able to judge when something is wrong or is likely to go wrong
recognizing there is a problem

Job Responsibility

Manage all assigned pharmacy workstations and tasks to support the team’s ability to promptly, safely and accurately fill patient prescriptions all while providing caring service that exceeds customer expectations
Deliver compassionate care to our millions of patients every day
Ensure all medication needs and regulatory compliance standards are met for our patients
Demonstrate ethical conduct and maintain patient confidentiality at all times

What we offer

Affordable medical plan options
401(k) plan (including matching company contributions)
Employee stock purchase plan
No-cost programs for all colleagues including wellness screenings, tobacco cessation and weight management programs, confidential counseling and financial coaching
Paid time off
Flexible work schedules
Family leave
Dependent care resources
Colleague assistance programs
Tuition assistance

Fulltime

Retrofit Solutions Engineer Cabin

Airbus

Location:
India , Bangalore

Category:
IT - Software Development

Contract Type:
Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
February 23, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Retrofit Solutions Engineer Cabin

Retrofit Solutions Engineer Cabin

Cabin System Retrofit Solution Engineer

Retrofit Solutions Engineer

Static Stress Cabin for Head of Version and Retrofit

Structure - Tolerancing Engineer

Ground Test Engineer

CATIA DMU Senior Software Engineer

Pharmacy Technician

Retrofit Solutions Engineer Cabin

Airbus

Location:India , Bangalore

Category:IT - Software Development

Contract Type:Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:February 23, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Retrofit Solutions Engineer Cabin

Retrofit Solutions Engineer Cabin

Cabin System Retrofit Solution Engineer

Retrofit Solutions Engineer

Static Stress Cabin for Head of Version and Retrofit

Structure - Tolerancing Engineer

Ground Test Engineer

CATIA DMU Senior Software Engineer

Pharmacy Technician

Location:
India , Bangalore

Category:
IT - Software Development

Contract Type:
Employment contract

Job Posted:
February 23, 2026