Refrigeration Design Engineer Job at JLL (Leicestershire)

Manager Field Systems Engineer - Refrigeration

Are you a highly skilled refrigeration field system engineer ready to take your ...

Location

United States

Salary:

155250.00 - 176000.00 USD / Year

Aldi

Expiration Date

Until further notice

Requirements

Bachelor's Degree in Mechanical Engineering, Electrical Engineering, Computer or Information Science, Programming, Refrigeration & HVAC or a related field is required
A minimum of 5 years of progressive experience in Refrigeration, HVAC, Building Automation, Controls, Information Technology and/or Computer Programming and Retail Operations is required
Ability to recommend, interpret, and/or apply company policies and procedures
Gives attention to detail and follows instruction
Ability to develop rapport, trust, and open communication that enhances the growth and job performance of direct reports
Understands the history, strategy, organizational authority, interdependence of job duties, products, systems, and services of the company
Conflict management skills
Ability to read and interpret construction documents, operation and maintenance instructions, procedure manuals and other technical literature
Ability to write and present complex reports and correspondence
Ability to speak effectively to varying range of audiences

Job Responsibility

Ensures the training, development, and performance of their team’s staff
Recruits and recommends qualified employees for their team’s staff positions
Establishes, communicates and evaluates job responsibilities and performance expectations to their team
Understands the overarching company strategy, while communicating and modeling the core values of the organization
Makes recommendations regarding building operations and controls for stores, National Services offices and warehouse facilities
Supports International Sustainability and International Real Estate company initiatives through technology, exploration and advancement on mechanical systems
Advises and works with design professionals to keep drawings accurate and up to date
Advises ALDI Facilities and Real Estate teams on contractor performance and training needs
Engages with equipment manufacturers and other vendors to address site specific or systemic concerns
Works with government officials, utility companies, and equipment suppliers as needed on specific projects

What we offer

401(k) Plan
Company 401(k) Matching Contributions
Employee Assistance Program (EAP)
PerkSpot National Discount Program
Medical, Prescription, Dental & Vision Insurance
Generous Vacation Time & 7 Paid Holidays
Up to 6 Weeks Paid Parental Leave at 100% of pay
Up to 2 Weeks Paid Caregiver Leave at 100% of pay
Short and Long-Term Disability Insurance
Life, Dependent Life and AD&D Insurance

Fulltime

New

Senior Refrigeration Engineer/Designer

Our client is an international leader in the engineering and manufacturing of cu...

Location

Canada , Scarborough

Salary:

95000.00 - 110000.00 CAD / Year

Randstad

Expiration Date

April 09, 2026

Requirements

Professional Experience: 8+ years of experience in industrial or commercial refrigeration system design, applications engineering, or installation/commissioning technical support
System Design Expertise: Demonstrated experience designing complete refrigeration systems and involvement in system integration with customer processes
Technical Knowledge: Strong understanding of refrigeration cycles, compressor performance, superheat control, oil management, and refrigeration controls
Drafting & Design Proficiency: Proven ability to read and produce P&IDs, control narratives, and general arrangement (GA) drawings
Codes & Compliance: Familiarity with Canadian codes and standards related to refrigeration, including CSA B52, ASHRAE 15, provincial regulations, and ASME B31.3/B31.5
Communication Skills: Strong ability to explain complex technical concepts to diverse stakeholders, including Sales, Production, Service, Field Technicians, and Management

Job Responsibility

Applications and Sales Support: Evaluate and understand customer process requirements, operating profiles, and specific constraints
Technical Validation: Verify Sales’ proposals by performing cooling load, energy balance, and equipment sizing calculations
Bidding Support: Support the sales team during the bidding phase by providing technical insight and performance estimates
System Design: Design skidded or built-up refrigeration systems and process chillers using HFC/HFO and ammonia
Operational Strategy: Define system operating envelopes, setpoints, and capacity-control strategies
Process Mapping: Develop and review process flows and P&IDs for new systems and major retrofits
Controls and Equipment Operation: Develop clear controls narratives
Programming Collaboration: Work with PLC programmers to define sequences of operation, alarm strategies, and interlocks
Safety Logic: Provide input to PLC/HMI logic to ensure the system operates safely and efficiently
Commissioning Support: Support commissioning teams by validating design intent, tuning control loops, and resolving startup issues

What we offer

Financial Growth: Competitive base salary plus a performance-driven profit-sharing program
Retirement & Health: Comprehensive benefits package (health, dental, and vision) and RRSP matching to support your long-term goals
Vibrant Culture: An engaged work environment featuring regular employee activities, including weekly snack days, quarterly team events, and summer BBQs
Career Development: Professional development support, including coverage for P.Eng. fees, technical training, and industry conferences
Impactful Work: The opportunity to lead varied, complex refrigeration projects and directly influence internal standard designs and control strategies
Core Values: A culture that prioritizes safety, technical excellence, and the delivery of practical, field-proven solutions

Fulltime

Senior Design Engineer

Position – Design Engineer (Application Engineering - Refrigeration Rack Systems...

Location

India , Bengaluru

Salary:

Not provided

Dover Precision Components

Expiration Date

Until further notice

Requirements

Bachelor’s degree in mechanical engineering (master’s preferred)
5–8 years of experience in product design within HVAC/ Refrigeration or custom equipment domains
Proven experience CAD modeling and drafting
Should have knowledge on refrigeration systems
Should have experience in creating 2D and 3D drawings using AutoCAD and SolidWorks
Generate Piping and instrumentation diagram transformation to system design, component selection like Piping, valve, compressor etc. of refrigeration products as per ANSI, ASTM and ASHRAE standards
Ability to read Engineering BOM, drawings
Component validation and propose low-cost value based on design requirement
Create P&ID System drawings & BOM
Document and communicate well at each step

Job Responsibility

Responsible for Generate Piping and instrumentation diagram transformation to system design, component selection like Piping, valve, compressor etc. of refrigeration products as per ANSI, ASTM, ASHRAE, CRN standards
Create detailed drawings based on sales orders for refrigeration systems in AutoCAD and SolidWorks
Calculates refrigeration specifications based on display case manufacturer’s requirements and refrigerated walk-in cooler/freezer requirements
Determines proper system/equipment type to meet the customer’s needs
Selects proper compressors, condensers, evaporators, controls and other accessories to satisfy the refrigeration requirements
Performs design calculations to size refrigeration components based on requirements for advance refrigeration systems
Component validation and propose low-cost value based on design requirement
Product enhancement
Drive decisions working with US Engineers and collaborating with cross functional teams

New

Senior Mechanical Engineer

Orbital Materials is seeking a highly skilled and innovative Senior Mechanical E...

Location

Canada

Salary:

Not provided

Orbital

Expiration Date

Until further notice

Requirements

Professional engineering designation in Alberta, Canada or local regulatory body
Experience in the design and equipment selection of mechanical systems used for data center cooling and/or HVAC systems
Familiarity with various data center tiers and best practices for efficiency and reliability
Continuous improvement mindset
Experience in the design, selection, and optimization of chiller systems for large-scale cooling applications
Proficiency in conducting thermodynamic analysis to optimize cooling system performance, energy efficiency, and heat transfer.
Practical experience in designing and executing lab experiments to validate the performance of mechanical systems, cooling solutions, and integrated systems.
Ability to interpret experimental data and translate findings into design improvements.
Experience in the selection and design of refrigeration systems and components

Job Responsibility

Mechanical Systems Design for Modular Data Centers and Cooling Solutions
Selection of coils, heat exchangers, chillers, compressors
Working with key stakeholders to optimize designs for performance, manufacturability, and ease of deployment
Design and Thermodynamic Analysis for Cold Plate Cooling Systems
Assist in setup, running and analysis of results for CFD
Assist in setup, running and analysis of results for FEA
Design, Selection and Analysis of Refrigeration Systems
Compare the impact on overall efficiency of the data center of different refrigerants for the ambient design condition
Select compressors, expansion valves, and other supporting systems
Coordination, Review and Approval of Technical Reports and Documentation

What we offer

Competitive salary commensurate with AI sector
Flexible and generous paid time off
Pension with company match
Excellent health, dental and vision insurance plans
Equity package - the ability to own part of Orbital Materials as we grow
Regular company offsites
The experience of working in a cutting-edge organization dedicated to a better future

Fulltime

New

Industrial Refrigeration Design Engineer

To design and propose industrial and commercial project to customer and legislat...

Location

United Kingdom , Leicestershire

Salary:

Not provided

JLL

Expiration Date

Until further notice

Requirements

Ability to be customer focused
Ability to demonstrate a high level of financial awareness
Ability to adhere to design standards
Ability to adhere to company vision and values
Have excellent team working skills and ability to use own initiative
Be able to work to stringent deadlines
Willingness to share knowledge and best practice models
Willingness to develop own skills and experience through learning interventions
Have a flexible approach to work
Be able to communicate to the highest level

Job Responsibility

Carry out site surveys where required
Generate and update enquiry bank
Attend customer scoping and design meetings where required
Produce initial outline design/scope
Produce Design File (electronic or hard copy) in line with ISO 9001 standard
Produce detailed design, consisting of but not limited to: Cold room heat load calculation, cabinet heat load calculations,, produce engineering sheets and pipework isometric drawings, equipment selections and pipe work sizing
Produce supplier/sub-contractor enquiries for quotations
Produce data for Design of Contracts project handover including: Equipment/supplier/sub-contractor procurement schedule, identify PED category of system and inform compliance team if CAT 4, calculate system refrigerant charge, produce high level program of works and high level phasing if required
Raise Contract Approval Form to enable project to be booked on system
Order any long lead time items to ensure project meets program

Fulltime

Sustainability Engineer

Amgen is searching for an Engineer responsible for planning, design, constructio...

Location

Portugal , Lisbon

Salary:

Not provided

Amgen

Expiration Date

Until further notice

Requirements

Master’s degree in Engineering, Physical, or Life Sciences
Bachelor’s degree in Chemical or Mechanical Engineering with 2 years of engineering/scientific experience
Demonstrated behaviors consistent with Amgen’s Values
Passion and interest in environmental sustainability
Experience in sustainability assessments (including carbon footprint elimination, water consumption reduction, and waste minimization)
Experience and/or knowledge of industrial, laboratory, and relevant manufacturing environments and systems including but not limited to: boilers, chilled water plants, refrigeration, compressed air, process heating/cooling, motors, pumps, HVAC, and lighting
Knowledge of engineering principles to determine attainable usage reductions/savings (energy and utility costs) for various energy and water conservation measures
Ability to develop and support detailed engineering analysis spreadsheets to support project justification, design, development, and capital planning
Experience or exposure to measurement and verification (M&V) and international measurement and verification protocols such as IPMVP (International Performance Measurement and Verification Protocol)
Experience or exposure to Certified Energy Manager (CEM) program concepts, including energy auditing, cost analysis, and sustainability best practices

Job Responsibility

Support the Corporate Environmental Sustainability program by developing and providing updates to strategic energy/carbon, water, and waste reduction targets across global sites
Identify energy and water consumption improvement initiatives and innovative alternative technologies to optimize utility usage
Develop the assessment, cost analysis, technical feasibility, and lifecycle impact of potential energy, water, and waste reduction related projects. This would include generating HVAC, heat-load, energy related, and mass/energy balance calculations
Develop presentations and reports to facilitate the business case development of project proposals
Work with system subject matter experts (SMEs) and clients to develop and specify opportunities for integration of projects within capital planning and equipment lifecycle-based replacement projects
Analyze the system and facilities energy and water usage as well as utility costs to find opportunities for performing energy and water audits on sites and drive energy efficiency and decarbonization initiatives across international locations
Identify system retro-commissioning opportunities to support advancement of monitoring based commissioning process/digitalization of equipment performance monitoring
Work with project design teams and external consultants to design, develop, and support engineering project development, plans, standards, and equipment selection
Ensure commissioning and qualification standards are developed and used. Provide support & lead aspects of C&Q (Commissioning & Qualification)
Investigate technology and issues as a technical SME for initiative and project design teams. Designs include new and renovated systems as well as new technology deployment. Ensure designs optimize the total equipment life cycle

What we offer

Vast opportunities to learn, develop, and move up and across our global organization
Diverse and inclusive community of belonging, where colleagues are empowered to bring ideas to the table, take risks, and act
Generous AMGEN Total Rewards Plan comprising healthcare, finance, wealth, and career benefits
Flexible work arrangements

Fulltime

Assistant inspector

An Assistant Inspector with the Department of Building and Safety, Housing and C...

Location

United States , Los Angeles

Salary:

67191.00 - 103084.00 USD / Year

City of Los Angeles

Expiration Date

Until further notice

Requirements

Successful completion of 60 semester or 90 quarter units of coursework from an accredited trade school, college or university
or One year of full-time paid experience in any one of the following: a. Building, civil, or architectural design drafting, surveying or engineering construction
or b. Building or public works inspection
or c. Performing at least helper duties in any of the following: carpentry, electrical, heating and refrigeration, plumbing, iron worker, masonry or operating engineering work, inspected public works construction or any combination of these crafts
or d. Working in property management of multi-family residential properties, coordinating the maintenance and repairs
or e. Performing inspections for a private inspection service relating to construction, building, or housing: or Two years of full-time paid experience with the City of Los Angeles’ Departments of Building and Safety, Housing and Community Investment, Public Works, Bureau of Contract Administration, or Los Angeles World Airports processing compliance orders, plans, permits, appeals, property research, certificates of occupancy, inspection requests, or City contracts.
A valid Class C driver’s license issued by the California Department of Motor Vehicles (DMV) is required at the time of filing.
Applicants will be disqualified and not be eligible for hire if their DMV record within the last 36 months reflects three or more moving violations and/or at-fault accidents, or a conviction of a major moving violation such as DUI.

Job Responsibility

Assists inspectors and receives training in the inspection of buildings and structures, plumbing, heating and refrigeration, electrical installations, grading projects
or as an elevator or pressure vessel safety engineer.
May be subject to frequent review, written examinations, and supervision, and may perform regular inspector’s duties as indicated by training progress.
May perform owner and property records research, data input, report generation and field data collection.
In the Housing and Community Investment Department may post notices of inspection at multi-family properties and distribute pertinent information regarding housing related issues to the public
and may independently make inspections of a limited scope.
In the Department of Public Works and Airports assist inspectors and receive training in the inspection of streets, sewers, storm drains, bridges and structures, and in the administration of public works contracts and permits
and may independently make inspections of a limited scope.

What we offer

employee benefit coverage (including health and dental coverage as well as life insurance)
Mileage will be paid according to established rates.

Fulltime

New

Quantum Systems Mechanical and Cryogenics Engineering Manager

Microsoft’s Quantum Systems organization is a multidisciplinary organization adv...

Location

United States , Redmond

Salary:

139900.00 - 274800.00 USD / Year

Microsoft Corporation

Expiration Date

Until further notice

Requirements

Bachelor's Degree in Mechanical Engineering, Cryogenics, Physics, or related field AND 8+ years industry experience in engineering, product/technical program management, or product development
OR Master's Degree in Mechanical Engineering, Cryogenics, Physics, or related field AND 6+ years industry experience in engineering, product/technical program management, or product development
OR Doctorate Mechanical Engineering, Cryogenics, Physics, or related field AND 3+ years industry experience in engineering, product/technical program management, or product development
OR equivalent experience
Ability to meet Microsoft, customer and/or government security screening requirements
Ability to leverage AI tools to drive innovation and efficiency
Ability to work in an “AI-first” environment using modern AI tools

Job Responsibility

Lead and develop a multidisciplinary engineering organization spanning Mechanical Engineering, Cryogenic Engineering (including cryofridge system design), and Physics
Own the lifecycle, upgrades, reliability, and maintenance strategy for cryogenic refrigerator systems across global sites
Establish and scale engineering infrastructure and toolchains, including mechanical/model shop facilities and standardized workflows for mechanical CAD, thermal and structural simulation, and product data management (PDM)
Own mechanical engineering standards and governance
Drive robust mechanical architecture, modeling, and simulation
Provide technical leadership, cross-team alignment, and strategic input
Embody our Culture and Values

Fulltime

Refrigeration Design Engineer

JLL

Location:
United Kingdom , Leicestershire

Category:
-

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
February 21, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Refrigeration Design Engineer