CrawlJobs Logo

Receiving Inspector

https://www.baxter.com/ Logo

Baxter

Location Icon

Location:
United States , Batesville

Category Icon
Category:
Quality Control

Job Type Icon

Contract Type:
Employment contract

Salary Icon

Salary:

24.12 USD / Hour
Save Job
Save Icon
Apply Position

Job Description:

In this role, you ensure the quality and compliance of incoming supplier materials by performing precise inspections using a variety of measurement tools and gauges. You expertly interpret engineering blueprints and specifications to verify that products meet required standards.

Job Responsibility:

  • Ensure the quality and compliance of incoming supplier materials by performing precise inspections using a variety of measurement tools and gauges
  • Interpret engineering blueprints and specifications to verify that products meet required standards
  • Accurately document inspection results in the on-line MIS system
  • Perform multi-vary studies by using a wide assortment of gauging and equipment
  • Coordinate and support Manufacturing, Engineering, QA and Supply Management in addition to communicating with suppliers to ensure all quality requirements are met or exceeded
  • Participate in team activities and problem solving sessions as required
  • Communicate problems and/or solutions to appropriate team member
  • As needed, document and/or chart production data to aid in problem identification, quality feedback and production scheduling
  • Evaluate defective material and tooling, faulty operations, questionable conditions and potential work stoppages
  • Advise and recommend alternatives to appropriate team member
  • Ensure that work area and equipment are maintained in a clean, orderly and safe condition
  • Follow prescribed safety regulations

Requirements:

  • Must pass Inspector I test
  • High School Diploma or (GED) General Education Degree (applies to anyone hired after 1997)
  • Must be proficient in the use of multi-dimensional testing and gauging equipment to include optical comparators, computerized vision measuring systems, electronic test equipment in addition to any other manual precision gauges
  • Must be proficient in the use of Intergraph, CAD and Telnet systems for viewing and plotting current blueprint and procedure cards
  • Must be able to identify problems, formulate solutions and implement necessary changes as required
  • Must have basic knowledge of GMP’s, SOP’s and FDA requirements
  • Must follow processes and procedures as written
What we offer:
  • Medical and dental coverage that start on day one
  • Insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance
  • Employee Stock Purchase Plan (ESPP)
  • 401(k) Retirement Savings Plan (RSP)
  • Flexible Spending Accounts
  • Educational assistance programs
  • Paid holidays
  • Paid time off ranging from 20 to 35 days based on length of service
  • Family and medical leaves of absence
  • Paid parental leave
  • Commuting benefits
  • Employee Discount Program
  • Employee Assistance Program (EAP)
  • Childcare benefits

Additional Information:

Job Posted:
March 13, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Baxter - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Receiving Inspector

Receiving Incoming Quality Inspector

iBUILT is currently accepting applications for an Receiving-Incoming Quality Ins...
Location
Location
United States , Berwick
Salary
Salary:
Not provided
ibuilt.com Logo
iBUILT
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Excellent attention to detail and ability to multitask
  • Works with a flexible schedule and demonstrates effective time management
  • Excellent communication skills
  • Excellent analytical and judgment skills.
  • Demonstrated ability to identify business process issues and drive process improvement.
  • Open-minded self-starter with the ability to adapt, improvise and problem solve.
  • Ability to work independently on multiple tasks and projects with various stakeholders with proper guidance of a team manager
  • Takes initiative and displays a sense of urgency – is highly responsive to business needs and unexpected situations that emerge
  • High school diploma or GED, college degree preferred
  • Lean, Six Sigma, and Kanban experience preferred
Job Responsibility
Job Responsibility
  • Responsible for all receiving functions of all incoming materials
  • Receive, quality check, label and store all incoming inventory
  • Compare received items against procurement documentation and other specifications to ensure completeness and accuracy of orders.
  • Inspection of purchased parts and material for conformance to specifications. Examines items for defects in materials, work, and damage occurring in transit, inspects and measures items for dimensional accuracy, fit, alignment, and functional operation, according to prints, parts manuals, company standards, and other specifications
  • Approves or rejects items, and records inspection and disposition information
  • Daily use and update or ERP inventory management system
  • Maintain cleanliness and organization in Warehouse and Receiving areas
What we offer
What we offer
  • Health insurance
  • Dental insurance
  • Vision insurance
  • Retirement plan
  • Paid time off
  • Fulltime
Read More
Arrow Right

Senior Material Supplier

As a Senior Material Supplier, you will be responsible for the operational suppo...
Location
Location
Belgium; United Kingdom , Zaventem; Luton
Salary
Salary:
Not provided
https://www.tui.com Logo
TUI
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Aviation background with supply chain experience, including procurement & tendering experience
  • Strong IT skills and knowledge of engineering systems
  • Ability to work on own initiative
  • Demonstrate self-confidence and the ability to present at all levels across a wide engineering organization
  • At least 2 years' experience in a similar position in aviation
  • Knowledge of the MS-Office package, aviation ERP systems
  • Experience with AMOS is a big plus
  • Authorised receiving inspector in the aviation sector is a plus
Job Responsibility
Job Responsibility
  • Operational support and procurement of aircraft spare parts
  • Tracing and tracking of on-going shipments worldwide
  • Expediting the delivery of parts into the shops or to other stations
  • Coordination of case-to-case logistical activities worldwide
  • Monitoring task progress and taking the necessary action to deliver in agreed timescales/budgets
  • Completing all paperwork in an accurate and timely manner
  • Maintaining a shift handover log for your designated area at the end of each day
  • Liaising with other departments as necessary
  • Willingness to travel to support the operational support of the engineering organisation
  • Acting up to Duty Material Supplier as requested within agreed levels of authority
What we offer
What we offer
  • Working in the leading global tourism group
  • Development and career opportunities
  • Personal benefits: attractive remuneration, generous travel benefits, extensive health & wellbeing offers
  • Fulltime
Read More
Arrow Right

Qc inspector – material receiving

Location
Location
United Arab Emirates , Abu Dhabi
Salary
Salary:
Not provided
lobelia.earth Logo
Lobellia
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum Qualification: Undergraduate – Major: Mechanical Engineering
  • Relevant Experience: +7 years
  • Material receiving inspection in EPC projects experience
Job Responsibility
Job Responsibility
  • Report to Site QC Manager regarding all quality matters
  • Attend joint inspection with Implementation Contractor team to verify material is accepted prior to offer for COMPANY inspection
  • Visual inspection of materials against packing list i.e. material type, size, grade, class, quantity, heat number, part number etc.
  • Review of documentation for the materials received for completeness prior to offering inspection to COMPANY
  • Co-ordination with COMPANY to perform receiving inspections
  • Any deficiency/damage noted shall be reported to Procurement team for addressing the issue with Vendor
  • NCR shall be raised for cases not meeting the requirements
  • Monitor the warehouse periodically to ensure equipment is preserved in accordance with Vendor recommendation and COMPANY specification
  • Other duties assigned by Project Quality Management
What we offer
What we offer
  • All-inclusive salary package
  • Single status sponsorship
  • Condition applies for food, accommodation (shared room of 2 persons) & transport – will be provided only on site
  • Overtime is included in your monthly salary
  • Other terms and benefits will be discussed to shortlisted candidates
  • Fulltime
Read More
Arrow Right

Assistant inspector

An Assistant Inspector with the Department of Building and Safety, Housing and C...
Location
Location
United States , Los Angeles
Salary
Salary:
67191.00 - 103084.00 USD / Year
lacity.gov Logo
City of Los Angeles
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Successful completion of 60 semester or 90 quarter units of coursework from an accredited trade school, college or university
  • or One year of full-time paid experience in any one of the following: a. Building, civil, or architectural design drafting, surveying or engineering construction
  • or b. Building or public works inspection
  • or c. Performing at least helper duties in any of the following: carpentry, electrical, heating and refrigeration, plumbing, iron worker, masonry or operating engineering work, inspected public works construction or any combination of these crafts
  • or d. Working in property management of multi-family residential properties, coordinating the maintenance and repairs
  • or e. Performing inspections for a private inspection service relating to construction, building, or housing: or Two years of full-time paid experience with the City of Los Angeles’ Departments of Building and Safety, Housing and Community Investment, Public Works, Bureau of Contract Administration, or Los Angeles World Airports processing compliance orders, plans, permits, appeals, property research, certificates of occupancy, inspection requests, or City contracts.
  • A valid Class C driver’s license issued by the California Department of Motor Vehicles (DMV) is required at the time of filing.
  • Applicants will be disqualified and not be eligible for hire if their DMV record within the last 36 months reflects three or more moving violations and/or at-fault accidents, or a conviction of a major moving violation such as DUI.
Job Responsibility
Job Responsibility
  • Assists inspectors and receives training in the inspection of buildings and structures, plumbing, heating and refrigeration, electrical installations, grading projects
  • or as an elevator or pressure vessel safety engineer.
  • May be subject to frequent review, written examinations, and supervision, and may perform regular inspector’s duties as indicated by training progress.
  • May perform owner and property records research, data input, report generation and field data collection.
  • In the Housing and Community Investment Department may post notices of inspection at multi-family properties and distribute pertinent information regarding housing related issues to the public
  • and may independently make inspections of a limited scope.
  • In the Department of Public Works and Airports assist inspectors and receive training in the inspection of streets, sewers, storm drains, bridges and structures, and in the administration of public works contracts and permits
  • and may independently make inspections of a limited scope.
What we offer
What we offer
  • employee benefit coverage (including health and dental coverage as well as life insurance)
  • Mileage will be paid according to established rates.
  • Fulltime
Read More
Arrow Right

Technical Service Representative II

At Percepta, we bring first-class service across each market we support. As a Te...
Location
Location
United States , Melbourne
Salary
Salary:
Not provided
ttec.com Logo
TTEC
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma or equivalent
  • Minimum 2-3 year of customer service experience
  • Minimum 1-year recent experience as an automotive technician in a powertrain or body/chassis/electrical diagnostic and repair role or equivalent training - preferred
  • Ability to analyze repair shop diagnosis information to determine coverage eligibility
  • Ability to read and understand workshop manual and electrical schematics
  • Ability to speak confidently about repair procedures
  • Proficiency with part numbers and parts catalog supersession pertaining to powertrain assemblies
  • Excellent interpersonal skills
  • Ability to use conflict resolution and negotiation skills to resolve difficult contacts from an automotive technical perspective
  • Strong working knowledge of the Internet, computers, and software (MS Office products, Internet Explorer, etc.)
Job Responsibility
Job Responsibility
  • Receive inbound calls from competitive make dealerships and independent repair facilities regarding powertrain warranty claims adjudication per contract terms and contact handling processes
  • Receive inbound calls from F/L dealerships, competitive make dealerships, independent repair facilities, and vehicle owners regarding warranty process/policy and claims adjudication per contract terms and contact handling processes
  • Receive inbound calls from independent inspectors taking verbal inspections reports and documenting them in the appropriate systems
  • Receive inbound emails from 3rd party vendors and process warranty claims for Motor craft products
  • Review digital photographs and supporting documentation
  • Provide real time powertrain related technical assistance to competitive make dealerships and independent repair facilities
  • Perform detailed claim analysis and adjudication per contract terms and contact handling processes
  • Place outbound calls to independent repair facilities and dealerships providing claim approval/denial details
  • Communicate with dealers and repair facilities in a professional, knowledgeable, empathetic manner pertaining to claim adjudication and concerns if authorization will not be provided
  • Provide assistance to F/L dealerships inquiring about the national powertrain network (NPN)
What we offer
What we offer
  • Culture of Service
  • Teamwork
  • Respect
  • Proactive
  • CareerGrowth
  • Diversity
  • Competitive Compensation
  • programs that offer incentives and promote physical, mental, and financial wellness
Read More
Arrow Right

Receiving inspector

This job is based in Satair. This job requires an awareness of any potential com...
Location
Location
Singapore , Singapore Area
Salary
Salary:
Not provided
airbus.com Logo
Airbus
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum Higher Nitec in related disciplines
  • 2 years of relevant experience will have an added advantage
  • Be able to communicate in English, both verbally and in writing
  • Basic literacy and numeracy skills
  • Basic IT and Microsoft office skills
  • Familiar with ERP system, preferably SAP
  • Ability to manage different ERP systems and softwares
  • Good knowledge about transport/shipping, hereunder INCO-terms
  • Service minded
  • Good team player
Job Responsibility
Job Responsibility
  • Accept the consignment against Delivery Order/Note or Packing List
  • Unpack and check the delivered items are correct with respect to part numbers, description, specification and quality as stated on the DO/Note or Packing List
  • In case any discrepancies found – all must be reported into the claim database
  • Inspect visually the condition of parts received particularly for any transit damage
  • Checks the appropriate ARC/release note/Certificate of Conformance are provided for items. Contact the Quality Dept. in the event of missing or wrong certificates
  • For shelf life controlled items, ensure remaining shelf life meets minimum requirement
  • Report any Suspected Unapproved Parts to the Manager (Director) - Quality
  • Perform Goods Receipt into SAP. Ensure all shelf life data are captured for all shelf life controlled items. Print certificate front page and product labels
  • Scan the documents and put the labels on the parts
  • Put the parts away on an agreed bin location
  • Fulltime
Read More
Arrow Right

Receiving inspector

This job is based in Satair. Accept the consignment against Delivery Order/Note ...
Location
Location
Singapore
Salary
Salary:
Not provided
airbus.com Logo
Airbus
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum Higher Nitec in related disciplines
  • Be able to communicate in English, both verbally and in writing
  • Basic literacy and numeracy skills
  • Basic IT and Microsoft office skills
  • Familiar with ERP system, preferably SAP
  • Ability to manage different ERP systems and softwares
  • Good knowledge about transport/shipping. Hereunder INCO-terms
  • The ideal candidate should be service minded, a good team player, able to multitask, thorough and tidy
Job Responsibility
Job Responsibility
  • Accept the consignment against Delivery Order/Note or Packing List
  • Unpack and check the delivered items are correct with respect to part numbers, description, specification and quality as stated on the DO/Note or Packing List
  • In case any discrepancies found – all must be reported into the claim database
  • Inspect visually the condition of parts received particularly for any transit damage
  • Checks the appropriate ARC/release note/Certificate of Conformance are provided for items. Contact the Quality Dept. in the event of missing or wrong certificates
  • For shelf life controlled items, ensure remaining shelf life meets minimum requirement
  • Report any Suspected Unapproved Parts to the Manager (Director) - Quality
  • Perform Goods Receipt into SAP. Ensure all shelf life data are captured for all shelf life controlled items. Print certificate front page and product labels
  • Scan the documents and put the labels on the parts
  • Put the parts away on an agreed bin location
  • Fulltime
Read More
Arrow Right

Material Receiving Inspector (Mechanical)-QCI

Material Receiving Inspector (Mechanical) checks and guarantees that certificate...
Location
Location
Saudi Arabia , Jubail
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • A university degree or diploma in a relevant discipline, or an equivalent qualification in Mechanical Engineering
  • Relevant experience in construction/modernization of oil & gas /industrial sector/ EPC projects large refinery plants
  • At least 10 years of experience in the specific discipline
  • Experience working on Main Contractor side
  • Fluent English
  • Excellent IT and analytical skills
  • Attention to detail, excellent communications skills
  • Strong interpersonal, team-oriented skills, self-motivation, and direction, with strong bias toward timely performance and problem resolution
Job Responsibility
Job Responsibility
  • Knowledge and experience of material receiving and inspection as per Client’s procedures
  • To forward materials to Subcontractors, according to the instructions given by the Material Controller
  • To keep records about the handling of materials, using the Company software systems
  • To perform feasibility analysis by the Company software system
  • To maintain the inventory of unused material for sale
  • To have general Mechanical QCI background (Metallic/ Non-Metallic Piping, Valves, Hydrotesting, Coating)
What we offer
What we offer
  • Competitive Salary package with benefits
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy