R&D Engineer 2 Job at Solomon Page (West Lafayette)

R&D Systems Engineer

Silvus is seeking a full-time R&D Systems Engineer that will report to the R&D D...

Location

United States , Los Angeles

Salary:

110000.00 - 150000.00 USD / Year

Silvus Technologies (International)

Expiration Date

Until further notice

Requirements

Minimum Master's Degree in Electrical Engineering or other related technical fields
Minimum 2 years of communication systems design experience
Fluent with C/C++, MATLAB, and/or Python
Working knowledge of RF signal propagation, channel modeling, and digital communication technologies
Must be a U.S. Person (U.S. Citizen, or U.S. Permanent Resident) due to clients under U.S. federal contracts

Job Responsibility

Algorithm and protocol design and parameterization for wireless systems projects
MATLAB & C/C++ based simulator development and maintenance
Fixed point design and simulation in support of hardware implementation
Hands-on work with Silvus radio products and Research & Development prototypes
System testing and characterization
Work with hardware and software engineers to characterize and troubleshoot
Work with field test engineers to plan and execute realistic field testing
Report to project lead, department director, and management as needed
Participate in the generation of technical documentation and presentations
Travel Requirements - semi-frequent local or long-distance travel for feature testing and demonstration

Fulltime

New

R&D Engineer 2

The R&D Engineer applies professional engineering principles to support the desi...

Location

United States , San Diego

Salary:

90000.00 - 98000.00 USD / Year

UC San Diego

Expiration Date

Until further notice

Requirements

Working knowledge of engineering principles and methods
Demonstrated knowledge and experience in materials selection, fabrication techniques, procurement procedures, assembly techniques, testing, troubleshooting, and calibration methods used in hydrometeorological instrument development and production
Working knowledge necessary to begin independent application of principles, practices and procedures in the completion of assignments
Knowledge of hydrological measurement principles for streamflow, soil moisture, and other parameters
Demonstrated ability to develop new methods for scientific investigation and to translate data information requirements to hardware capable of collecting such information
Knowledge of Matlab, Python, BASIC, or similar programming languages and ability to quickly become conversant in a variety of languages
Experience in planning and performing laboratory work and fieldwork necessary to meet project objectives in a safe manner including when traveling with hazardous materials, in adverse conditions
Ability to read schematics, solder, operate equipment to test electronics
Ability to work with various 3rd party sensors and data acquisition systems
Experience with both PC and Unix operating systems

Job Responsibility

Support the design, preparation, deployment, operation, and maintenance of specialized hydrometeorological observing systems
Support the implementation of observational infrastructure by assisting with integration of sensors and data loggers, testing of components, and field deployment activities
Perform routine and corrective maintenance of existing stations
Troubleshoot equipment and communications issues
Support analysis of station data
Contribute to documentation related to station configuration, installation methods, and maintenance practices
Provide day-to-day technical guidance to junior staff, interns, and graduate students during laboratory and field activities
Support multiple projects simultaneously, adapting to changing field conditions, access constraints, and operational priorities

Fulltime

Mechanical Engineer

Location

United States , Carrollton

Salary:

90000.00 - 100000.00 USD / Year

Ommo Technologies

Expiration Date

Until further notice

Requirements

2+ years of relevant experience with mechanical design engineering
Bachelor’s degree in Mechanical Engineering or related fields
Proficiency in 3D CAD design, FEA, and 2D drafting/ drawings
Experience designing parts for a variety of machining processes
Experience with a broad range of finishing processes
Self motivated and capable of driving and leading projects
Good planning and time management skills
Comfortable with and capable of solving very complex and ambiguous problems and managing multiple projects simultaneously

Job Responsibility

Design & develop products from concept to mass production
Design & prototype test fixtures and test equipment for R&D and mass production
3D CAD design for manufacturing, spanning a variety of processes, including milling, turning, and injection molding.
Create engineering drawings with GD&T best practices
Create and manage product/ project documentation throughout the product life cycle, in accordance with the company’s ISO13485 QMS including: Product development plans (PDP)
Design inputs, product requirements, and design outputs
Design Verification & Design Validation Plans as well as supporting documents, reports, and matrices.
Failure mode effect analysis (FMEA)
Calculate (excel/ hand calcs) important design criteria, such as forces, stress, deflection, wear, etc and create FEA models/ simulations when necessary
Analyze manufacturing data for assigned projects to ensure requirements and quality metrics are met.

What we offer

PTO
Equity
Medical, Dental & Vision
401K & 401K Matching

Fulltime

Middle AI R&D Engineer (Prototypes & Innovation)

Indeema is looking for a skilled AI R&D Engineer to join our Team.

Location

Ukraine , Lviv

Salary:

Not provided

Indeema Software

Expiration Date

Until further notice

Requirements

2+ years of experience in software engineering, ML engineering, or applied AI development
Strong understanding of AI/ML fundamentals, especially transformer-based architectures
Hands-on experience with LLMs, including prompt engineering, RAG systems, and/or fine-tuning
Strong Python proficiency and ability to build production-quality prototypes (PyTorch, FastAPI or similar)
Experience with building AI workflows using frameworks such as LangChain, LlamaIndex or equivalent
Understanding of ML concepts: loss functions, optimization, evaluation metrics, overfitting
Experience working with embeddings, vector databases, and retrieval pipelines
Ability to design and run experiments, evaluate results rigorously, and document findings clearly
Comfortable reading and interpreting research papers and applying relevant ideas in practice
Experience with Git and collaborative development workflows (code reviews, CI/CD basics, testing practices)

Job Responsibility

Research and evaluate new AI models, techniques, and architectures together with the R&D team
Design, run, and analyze experiments, ensuring reproducibility and clear documentation of results
Rapidly develop AI prototypes (agents, RAG systems, classifiers, copilots, vision-based solutions)
Benchmark different approaches and present results to stakeholders to support product decisions
Transform successful prototypes into production-ready features in collaboration with engineering teams
Deploy and test AI models, including on edge devices such as NVIDIA Jetson
Read and critically evaluate research papers and extract actionable insights
Contribute to the technical roadmap with ideas based on research and experimentation
Promote strong engineering and research practices (clean code, reproducibility, experiment rigor)
Share knowledge with the team through demos, documentation, and internal presentations

Fulltime

R&D Sterility Assurance - Project Lead

At Baxter, our mission to save and sustain lives is driven by scientific rigor a...

Location

Belgium , Braine-l'Alleud

Salary:

Not provided

Baxter

Expiration Date

Until further notice

Requirements

B.S. in Engineering with 5–8 years of experience, or M.S. with 2–4 years, or Ph.D. with 1–2 years of relevant industry experience
Understanding of engineering principles and cross-disciplinary collaboration
Knowledge of sterilization modalities (Moist Heat, EtO, Radiation, Aseptic Processing preferred)
Experience in GMP environments and with regulatory expectations for sterile products
Ability to design experiments, analyze data, and draw meaningful conclusions
Analytical, structured problem-solver with strong decision-making abilities
Clear, confident communicator able to influence stakeholders and management
Able to work independently in ambiguous environments while balancing quality and business needs
Proven ability to mentor and support junior colleagues
Willingness to travel up to 20%

Job Responsibility

Act as the Sterility Assurance Project Lead / Focal Point for R&D programs
Define and execute sterility assurance strategies, including test method validation plans, rationale statements, and sterilization parameters
Provide interpretation and guidance on GxP and global sterility regulations
Support regulatory submissions related to sterility assurance
Lead sterility assurance activities with a high degree of autonomy across projects of broad scope
Contribute to project planning, budgets, product requirements, and design decisions
Communicate status, risks, and recommendations to cross-functional teams and leadership
Serve as a technical liaison with manufacturing facilities (domestic and international)
Evaluate and adapt sterilization approaches to optimize quality, safety, and cycle time
Support microbiology test method validations

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Health & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer

Fulltime

Manufacturing Engineering Lead

As Manufacturing Engineering Lead you'll be the technical anchor for one of Toru...

Location

United States , South Salt Lake

Salary:

100000.00 - 140000.00 USD / Year

Torus

Expiration Date

Until further notice

Requirements

6+ years of experience in manufacturing engineering, with at least 2 years in a technical lead or senior individual contributor capacity
Demonstrated experience with complex electromechanical or rotating machinery assembly and production processes
Proven ability to lead technical work across a team — setting direction, reviewing output, and holding the line on quality and timelines
Strong hands-on problem-solving skills with experience using structured methodologies (8D, FMEA, root cause analysis)
Proficiency with engineering documentation systems and change management processes
Experience driving design-to-manufacturing transitions and collaborating directly with product or R&D engineering teams
Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related technical field
Must have the ability to safely lift and move objects weighing up to 50 lbs.
Must be capable of standing, bending, and executing repetitive tasks for prolonged periods of time.
Ability to read, identify, observe and recognize details, color-coding and fine print at close range on associated engineering drawings.

Job Responsibility

Serve as the go-to technical resource on the manufacturing line, fielding engineering questions and resolving issues as they arise in real time
Own day-to-day engineering execution on the line — keeping projects on track, removing blockers, and maintaining momentum
Lead process development, documentation, and continuous improvement efforts for assembly, test, and production
Drive design-for-manufacturability (DFM) feedback and ensure smooth transitions from R&D and product engineering into production
Own and maintain critical manufacturing documentation including work instructions, process specs, BOMs, and engineering change orders
Identify and resolve technical problems that affect throughput, quality, or safety.
Collaborate closely with cross-functional teams including Product Engineering, Quality, Supply Chain, and Production Operations
Support capacity planning, tooling and equipment decisions, and capital project scoping.
Other duties and projects as assigned

What we offer

Employee Rewards Package including equity
401(k) Retirement Savings Plan
Health Benefits Package: Choice between traditional PPO or HSA eligible medical plans
Dental insurance
and Vision insurance
Human-centered Paid Time Off (based on employment status) including unlimited discretionary PTO
10-days paid company holidays
Waiting period-free 100% paid parental leave.
Torus paid Life with option to purchase additional coverage
Voluntary Short- and Long-Term Disability Insurance

Fulltime

New

R&D Sterility Assurance - Project Lead

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

Belgium , Braine-l'Alleud

Salary:

Not provided

Baxter

Expiration Date

Until further notice

Requirements

B.S. in Engineering with 5–8 years of experience, or M.S. with 2–4 years, or Ph.D. with 1–2 years of relevant industry experience
Strong understanding of engineering principles and cross‑disciplinary collaboration
Knowledge of sterilization modalities (Moist Heat, EtO, Radiation, Aseptic Processing preferred)
Experience in GMP environments and with regulatory expectations for sterile products
Ability to design experiments, analyze data, and draw meaningful conclusions
Analytical, structured problem‑solver with strong decision‑making abilities
Clear, confident communicator able to influence stakeholders and management
Able to work independently in ambiguous environments while balancing quality and business needs
Proven ability to mentor and support junior colleagues
Willingness to travel up to 20%

Job Responsibility

Act as the Sterility Assurance Project Lead / Focal Point for R&D programs
Define and execute sterility assurance strategies, including test method validation plans, rationale statements, and sterilization parameters
Provide interpretation and guidance on GxP and global sterility regulations
Support regulatory submissions related to sterility assurance
Lead sterility assurance activities with a high degree of autonomy across projects of broad scope
Contribute to project planning, budgets, product requirements, and design decisions
Communicate status, risks, and recommendations to cross‑functional teams and leadership
Serve as a technical liaison with manufacturing facilities (domestic and international)
Evaluate and adapt sterilization approaches to optimize quality, safety, and cycle time
Support microbiology test method validations

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer

Fulltime

R&D Sterility Assurance - Project Lead

This is where your work makes a difference. At Baxter, we believe every person—r...

Location

Belgium , Braine-l'Alleud

Salary:

Not provided

Baxter

Expiration Date

Until further notice

Requirements

B.S. in Engineering with 5–8 years of experience, or M.S. with 2–4 years, or Ph.D. with 1–2 years of relevant industry experience
Strong understanding of engineering principles and cross‑disciplinary collaboration
Knowledge of sterilization modalities (Moist Heat, EtO, Radiation, Aseptic Processing preferred)
Experience in GMP environments and with regulatory expectations for sterile products
Ability to design experiments, analyze data, and draw meaningful conclusions
Analytical, structured problem‑solver with strong decision‑making abilities
Clear, confident communicator able to influence stakeholders and management
Able to work independently in ambiguous environments while balancing quality and business needs
Proven ability to mentor and support junior colleagues
Willingness to travel up to 20%

Job Responsibility

Act as the Sterility Assurance Project Lead / Focal Point for R&D programs
Define and execute sterility assurance strategies, including test method validation plans, rationale statements, and sterilization parameters
Provide interpretation and guidance on GxP and global sterility regulations
Support regulatory submissions related to sterility assurance
Lead sterility assurance activities with a high degree of autonomy across projects of broad scope
Contribute to project planning, budgets, product requirements, and design decisions
Communicate status, risks, and recommendations to cross‑functional teams and leadership
Serve as a technical liaison with manufacturing facilities (domestic and international)
Evaluate and adapt sterilization approaches to optimize quality, safety, and cycle time
Support microbiology test method validations

What we offer

Support for Parents
Continuing Education/ Professional Development
Employee Heath & Well-Being Benefits
Paid Time Off
2 Days a Year to Volunteer

Fulltime

R&D Engineer 2

Solomon Page

Location:
United States , West Lafayette

Category:
Research and Development

Contract Type:
Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
January 02, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for R&D Engineer 2

R&D Systems Engineer

R&D Engineer 2

Mechanical Engineer

Middle AI R&D Engineer (Prototypes & Innovation)

R&D Sterility Assurance - Project Lead

Manufacturing Engineering Lead

R&D Sterility Assurance - Project Lead

R&D Sterility Assurance - Project Lead

R&D Engineer 2

Solomon Page

Location:United States , West Lafayette

Category:Research and Development

Contract Type:Employment contract

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:January 02, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for R&D Engineer 2

R&D Systems Engineer

R&D Engineer 2

Mechanical Engineer

Middle AI R&D Engineer (Prototypes & Innovation)

R&D Sterility Assurance - Project Lead

Manufacturing Engineering Lead

R&D Sterility Assurance - Project Lead

R&D Sterility Assurance - Project Lead

Location:
United States , West Lafayette

Category:
Research and Development

Contract Type:
Employment contract

Job Posted:
January 02, 2026