Quality Inspector - Mechanical - Level II Job at SQA Services (Hialeah)

Quality Source Inspector - Mechanical - Level II

We’re hiring for a Quality Mechanical Source Inspector position in Pittsburgh, P...

Location

United States , Pittsburgh

Salary:

30.00 - 34.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

3+ years of hands-on experience with precision mechanical parts inspection
Strong ability to read and interpret manufacturing drawings and industry/commodity standards
Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., indicators, micrometers, calipers, height gauges)
Experience with certificates of conformance and inspection documentation
Ability to adapt to new technology and software
Excellent visual acuity to detect defects in complex products
Must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with ITAR

Job Responsibility

Conducting precision mechanical inspections at one or more client suppliers in Pittsburgh and the Northeast region
Perform precision inspection verifications on mechanical parts, components, assemblies, and materials
Inspection may include, but is not limited to, purchased parts, in-process and final assemblies, and materials for workmanship and conformance to specifications/drawings
Perform surface plate inspection of the first article, in-process, and lot sample parts if required
Utilize inspection equipment such as micrometers, gauge blocks, dial indicators, height gauges, optical comparators, profilometers, and coordinate measuring machines (CMMs) if necessary
Visual acuity and the ability to detect defects in highly complex products
Verify documentation packages to industry/commodity-specific standards
Classify defect types and verify rework conducted during the time of the inspection

What we offer

Mileage reimbursement at the US gov't rate ($0.725 per mile driven). Untaxed

Parttime

Quality Source Inspector - Mechanical - Level II

Location

United States , New Kensington; Pittsburgh

Salary:

Not provided

SQA Services

Expiration Date

Until further notice

Requirements

Experience with GD&T
Familiarity with precise measurement hand tools for mechanical inspections
Experience with Quality Inspections (e.g., Electromechanical, Machining, Composites)
Experience with Certification of Conformances

Job Responsibility

Travel to one or more supplier sites to support source inspections on an as needed basis

Parttime

Qa/qc Inspector Ii - Civil

The QA/QC Inspector 2 is a senior, advanced inspector responsible for overseeing...

Location

United States , Hackberry

Salary:

Not provided

McDermott

Expiration Date

Until further notice

Requirements

Minimum 7 years of progressive industrial construction/maintenance industry experience is required, with 5+ years of advanced QA/QC inspection in the specified discipline
Hold a senior/advanced professional certification for the discipline (e.g., AWS Senior Certified Welding Inspector (SCWI), NICET Level III/IV, or equivalent advanced state/national Civil certifications)
Expert knowledge of relevant industry codes and standards, and the ability to interpret and apply them to construction practices
Proven ability to manage inspection records for inclusion in the final Mechanical Completion/Turnover Documentation

Job Responsibility

Act as the lead inspector for high-risk or critical path activities, managing all associated quality documentation and final turnover packages for the assigned discipline
Conduct internal and external quality audits of subcontractor processes and systems to ensure adherence to the QMS and contractual requirements
Provide technical disposition and approval for complex Non-Conformance Reports (NCRs) and coordinate with regulatory bodies for final approval and commissioning
Develop and review Inspection Test Plans (ITPs) and job-specific quality procedures, ensuring they meet the most stringent project specifications and industry codes (e.g., ASME, API, NEC)
Mentor and provide expert technical guidance to QA/QC Inspectors 1 and Technicians

Fulltime

Lead Quality Inspector

Reporting to the Quality Supervisor, you will be responsible for performing visu...

Location

United States , Houston

Salary:

65000.00 - 70000.00 USD / Year

Celeros Flow Technology

Expiration Date

Until further notice

Requirements

NACE Level II Coatings required
Supervisory experience required
Experienced in use of precision inspection equipment (ex., mics, callipers. Etc) to measure dimensional details as listed on drawings
Knowledge in reading & interpret blueprints, including GD&T
Experience in using and programming of Articulated ARMs is required
Knowledge of manufacturing processes and techniques, test equipment and procedures, and assembly applications
Use of hand and power tools
Strong computer skills including MS Office Suite skills, including Word, Excel, and Outlook
Experience with SAP (Required)
Ability to work in a team-oriented environment that is fast-paced and demanding

Job Responsibility

Performing visual, mechanical inspection of purchased or manufactured parts, in process or finished, to determine if the parts conform to specifications, drawings, designated codes and standards
Using precision measuring and testing equipment, including calipers, height gage, micrometre’s, surface plate, Articulated ARM, Optical Comparator to perform mechanical inspections
Preparing a Non-Conformance Report (NCR) for any part that does not meet specified requirements and processing it per established procedures
Document nonconformances in SAP- NCR module where needed and complete the transactions in SAP
Review and verification of materials received from vendors
Witnessing internal testing procedures to verify accuracy of results
Interpreting and executing an Inspection and Test Plan (ITP)
Interfacing with third-party inspectors to verify completion of required customer requests
Handling other assigned work-related functions as deemed necessary and appropriate by your immediate supervisor
Provide on-the-job training and guidance to Level I inspection personnel

What we offer

Health Insurance (effective on start date)
Dental/Vision (effective on start date)
Flexible Spending Accounts/Health Savings Accounts
Life Insurance/Disability/Accident/Critical Illness
401(k) Savings Plan with generous company match
Tuition Reimbursement
Paid time off/Generous Holiday Schedule

Fulltime

New

PeB Quality Engineer

Location

India , Kolkata

Salary:

Not provided

Randstad

Expiration Date

August 23, 2026

Requirements

Bachelor's degree in Mechanical Engineering
3-5 years of experience in PEB/Steel Fabrication Quality Control
Certifications: AWS CWI/CSWIP, NDT Level II (UT, RT, MT, PT), ISO 9001 Auditor (preferred)
Strong knowledge of welding standards (AWS, ASME), NDT methods, and steel structures
Experience in customer handling, TPI coordination, and QAP preparation
Proficiency in MS Office, AutoCAD (basic), and QA/QC software
Excellent verbal and written communication skills
Strong supervisory and leadership skills
Excellent organizational skills and attention to detail

Job Responsibility

Develop and implement Quality Assurance Plans (QAP) for PEB projects
Conduct in-process and final inspections to ensure compliance with AWS, AISC, ISO, and customer specifications
Monitor welding processes (SMAW, GMAW, FCAW, SAW) and ensure adherence to WPS/PQR
Perform visual inspections (VT), dimensional checks, and material verification
Oversee welding quality and ensure compliance with ASME, AWS D1.1, and EN standards
Coordinate Non-Destructive Testing (NDT) such as UT, RT, MT, PT, and PMI
Review NDT reports and ensure corrective actions for defects
Liaise with Third-Party Inspectors (TPI) and clients for inspections and approvals
Address customer quality concerns and ensure timely resolution
Prepare Inspection Test Plans (ITP), Method Statements, and Quality Reports

Fulltime

Senior QAQC Inspector - Advance NDT

To interpret the suitability of products and processes against the designated sp...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor of Engineering - Mechanical / Metallurgy or Equivalent
NDT certificate in ASNT/PCN Level III for methods in UT, RT, PAUT and TOFD, as minimum
NDT certificate in ASNT/PCN Level II for methods MT and PT, as minimum
CSWIP 3.1 certification and NDT Certificate in ECT, preferred
Minimum 10 years of working experience as NDE personnel for Oil & Gas projects, preferably in LNG (greenfield, brownfield, shutdowns, and live plant environments)
Demonstrated minimum 4-6 years of hands-on experience in advance NDT (PAUT/TOFD) post certification and NDT data interpretation, procedure review, scan plan assessment, and technical validation of contractor inspection outputs
Practical experience in interpretation and acceptance evaluation of weld inspection results against ASME Section V, ASME B31.3, ASME VIII, API 1104, API 5L, project specifications, and approved inspection procedures
Demonstrated understanding of welding processes, weld joint configurations, weld repair scenarios, heat affected zone considerations, common fabrication and service-induced discontinuities, and the impact of welding variables on NDT technique selection and interpretation
Demonstrated ability to assess inspection limitations arising from geometry, restricted access, material condition, and weld profile, coating, cladding, or in-service constraints, and recommend technically suitable inspection approaches
Extensive experience with reviewing/interpretation of PAUT/TOFD, RT Film and witnessing of MT and PT methods

Job Responsibility

Engage with external Contractors to perform PAUT/TOFD and advance NDT techniques and perform defect sizing, characterization
Review and technically assess contractor-issued NDT reports, interpretation records, images, and supporting inspection data to confirm adequacy, traceability, and compliance prior to acceptance
Review and verify NDT procedures, technique sheets, personnel certifications, calibration records, equipment validity, and qualification records prior to commencement of inspection activities
Ensure full traceability between weld maps, line/component identification, NDT reports, repair history, final inspection status, and supporting quality records
Interpret advance NDT data and evaluate indications against the applicable acceptance criteria (ASME, API, Project specs.) and prepare and accurate inspection reports with supporting data/images
Engaging contractors and applicable third-party organizations with a professional approach and maintain a good working level relationship
Review contractors documented quality deliverables in accordance with the requirements and expectations of COMPANY and provide clear, concise output to the applicable quality focal point
Evaluate the suitability of products and processes at key stages against the prescribed specification requirements and is effectively implemented
Ensure NDE traceability of inspected welds and components
Continuously monitor the quality of works in progress at site and at the EPC Contractor fabrication workshop against the applicable NDT Procedure and COMPANY technical specification

Fulltime

Qa/qc Inspector (Welding)

Location

China , Qingdao

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Minimum Higher National Diploma (HND) or Diploma in Mechanical, Welding, Metallurgy, or equivalent
Certification as AWS SCWI, CSWIP 3.2 Senior Welding Inspector, or equivalent
ASNT Level II certification in NDT methods (VT, MT, PT, RT, UT)
Strong knowledge of international codes and standards including AWS, API, ASME, ASNT, EN, DEP, and ISO
Proficient in MS Office and database management systems
Minimum 10 years of welding and NDT inspection experience, including at least 5 years post-certification within the Oil & Gas industry
Minimum 5 years of offshore project experience
Proven experience in inspection and testing for major oil & gas projects, including offshore process platforms and jackets across all phases (manufacturing, fabrication, construction, and installation)
Experience in inspection of structures, piping, offshore pipelines, and materials across various welding processes
Familiarity with advanced NDT techniques such as UT, AUT, and PAUT

Job Responsibility

Ensure quality requirements for fabrication, construction, and installation activities are implemented in accordance with approved quality procedures, plans, and project documentation
Verify that contractors, subcontractors, and vendors deploy competent resources, follow internationally accepted practices, and deliver products compliant with corporate and project quality standards
Participate in inspection, surveillance, and audit activities involving contractors, subcontractors, vendors, manufacturers, suppliers, and third-party inspection and certification bodies
Review and verify project quality documentation, including Inspection & Test Plans (ITPs), Method Statements, Work Procedures, and WPS/PQR documents
Confirm personnel qualifications and ensure calibration status of inspection equipment is valid
Attend material receiving inspections and review Material Test Certificates (MTCs)
Monitor welding activities at site and fabrication yards to ensure compliance with approved Welding Procedure Specifications (WPS)
Attend Procedure Qualification Record (PQR) mechanical testing and witness welder qualification tests, including evaluation of visual inspections and NDT results
Witness and interpret daily NDT activities at site and fabrication yards, and assess inspection findings
Participate in dimensional control inspections, including laser survey inspections where applicable

Fulltime

Senior Multidiscipline Inspector

Understanding the requirements of Vendor / Manufacturer's Quality System require...

Location

United Arab Emirates , Abu Dhabi

Salary:

Not provided

Bureau Veritas Certification CZ, s.r.o.

Expiration Date

Until further notice

Requirements

Degree in Mechanical, Electrical, Welding or Metallurgical Engineering. CSWIP 3.2 or AWS-Sr, CWI or ERS welding inspection and PCN level II qualification is desirable and BGAS Level 2 or NACE Level 1 certification requirements
Minimum of 15 years' experience in onshore and offshore oil and gas/ petrochemical industry, third party inspection and verification of activities including Welding/ Process Piping/ Mechanical Equipment, Painting, Coating, Wrapping, Hydro testing and advance NDT methods with ability to assess NDT procedures, experience in review and approval of multidiscipline ITPs, procedures, site quires, NCR and concession requests
Very good knowledge of spoken and written English language including writing of technical reports / procedures and QA/QC documentation
Proven experience in liaising with EPC Contractors
Computer literate and familiarity with codes ASME, AWS, API, DNV, ISO and BS

Job Responsibility

Understanding the requirements of Vendor / Manufacturer's Quality System requirements
Review and verification of Manufacturer / Vendor documents as per Purchase Orders, Material Specifications as per relevant codes and project specifications
Carryout Material Receiving Inspection of all permanent Project Material by EPC Contractor
Witness verify and endorse Procedure and Welders qualification
Review and approval of Inspection & Test Plans
Review and approval of material certificates
Monitor, inspect and approve all welding including welding procedures and NDT works
Monitor, review and approve all PWHT works
Review of all radiographs/NDT reports
Signing of weld / NDT log

Fulltime

Select Country

Quality Inspector - Mechanical - Level II

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?