Quality Inspector - Mechanical - Level 2 Job at SQA Services (Los Angeles)

New

Quality Inspector - Mechanical - Level 2

We’re hiring for a Quality Mechanical Inspector position in Stuart, FL. This is ...

Location

United States , Stuart

Salary:

25.00 - 29.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

2+ years of hands-on experience with precision mechanical parts inspection
Strong ability to read and interpret manufacturing drawings and industry/commodity standards
Proficient in GD&T and validating dimensions (tolerances ≥.001)
Experience with certificates of conformance and inspection documentation
Ability to adapt to new technology and software
Weekends are required (every other week)
Excellent visual acuity to detect defects in complex products
Must be willing to undergo a background check
Must be ITAR compliant
Ability to read and write in English and communicate clearly verbally

Job Responsibility

Conduct visual, physical, and dimensional inspections of parts, assemblies, and materials at various stages (in-process, final, and first article) to ensure conformance to specifications and drawings
Use a variety of precision inspection tools, including micrometers, dial indicators, calipers, huck and height gauges and feeler gauges
Demonstrate strong visual acuity with the ability to detect defects in complex products and assess workmanship quality per customer specifications
Classify defect types and verify rework completed during inspection
Verify documentation packages meet industry and commodity-specific standards
Ensure proper protection and preservation of inspected products prior to further processing or shipment
Perform 5S activities
Assist with customer requests

What we offer

Mileage reimbursement at the US gov't rate ($0.70 per mile driven, up to 100 miles). Untaxed

Fulltime

New

Quality Inspector - Mechanical - Level 2

We're actively seeking a Quality Mechanical Inspector for an immediate opening i...

Location

United States , Hialeah, FL

Salary:

30.00 - 32.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

Previous mechanical inspection experience
Knowledge of GD&T and inspection methodologies
Strong attention to detail and ability to follow inspection plans and protocols
Experience with the use of precision measurement tools and equipment
Ability to read and interpret blueprints and/or engineering drawings
Ability to work effectively within a quality management system
Must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with ITAR

Job Responsibility

Verify that inspection equipment is capable of detecting defects and ensure inspection methodology is in line with drawing intent
Work within the Quality Management system and undergo basic training on policies and procedures
Ability to read and understand drawings to pull the dimensions to create Inspection Test Plans (ITPs)
Understanding of what inspection equipment and methodology would be needed to effectively measure/inspect different mechanical parts
Ability to work in SAP to upload the ITPs for each part where one is created

What we offer

Mileage reimbursement at the US gov't rate ($0.70 per mile driven). Untaxed

Fulltime

New

Quality Inspector - Electromechanical - Level 2

We are seeking a dedicated and highly skilled Mechanical Inspector Level 2 to jo...

Location

United States , Price

Salary:

32.00 - 36.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

Extensive experience as a Quality Inspector or CMM Operator, with industry and commodity-specific expertise
Proficiency in dimensional inspection of precision tolerance parts
Strong knowledge and hands-on experience with all inspection tools
Ability to understand and interpret complex GD&T requirements and validate complex assemblies
Experience with multiple primary and secondary part numbers (e.g., brackets, clips, doublers, splices, brackets, drip shields, etc.)
To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.

Job Responsibility

Conduct visual, physical, and dimensional inspections (both in-process and final) of parts, per project specifications and requirements
Perform incoming inspections from external providers of products and services (e.g., nickel plating)
Conduct in-process and final inspections of critical features, including witness inspections (e.g., CMM program run)
Compile final inspection sign-off sheets and inspection packages
Verify that inspection equipment is capable of detecting defects and ensure inspection methodology aligns with drawing intent
Review and validate the justification for parts not inspected at final inspection
Audit and validate the execution of inspection plans as applicable
Document non-conformances using approved methods and submit non-conformance reports for customer disposition
Verify hardware cleanliness and absence of internal or external foreign object debris
Verify fasteners are properly installed

What we offer

Mileage Compensation ($0.70 per mile driven)

Fulltime

New

Quality Inspector - Electromechanical - Level 2

We are seeking a dedicated and highly skilled Mechanical Inspector Level 2 to jo...

Location

United States , Denver

Salary:

32.00 - 36.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

Extensive experience as a Quality Inspector or CMM Operator, with industry and commodity-specific expertise
Proficiency in dimensional inspection of precision tolerance parts
Strong knowledge and hands-on experience with all inspection tools
Ability to understand and interpret complex GD&T requirements and validate complex assemblies
Experience with multiple primary and secondary part numbers (e.g., brackets, clips, doublers, splices, brackets, drip shields, etc.)
To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State

Job Responsibility

Conduct visual, physical, and dimensional inspections (both in-process and final) of parts, per project specifications and requirements
Perform incoming inspections from external providers of products and services (e.g., nickel plating)
Conduct in-process and final inspections of critical features, including witness inspections (e.g., CMM program run)
Compile final inspection sign-off sheets and inspection packages
Verify that inspection equipment is capable of detecting defects and ensure inspection methodology aligns with drawing intent
Review and validate the justification for parts not inspected at final inspection
Audit and validate the execution of inspection plans as applicable
Document non-conformances using approved methods and submit non-conformance reports for customer disposition
Verify hardware cleanliness and absence of internal or external foreign object debris
Verify fasteners are properly installed

What we offer

Mileage Compensation ($0.70 per mile driven)

Fulltime

New

Quality Inspector - Mechanical - Level 2

We’re hiring for a Quality Mechanical Inspector Level 2 position in Long Beach, ...

Location

United States , Long Beach

Salary:

30.00 - 33.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

3+ years of hands-on experience with precision mechanical parts inspection
Strong ability to read and interpret manufacturing drawings and industry/commodity standards
Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., micrometers, calipers, height gauges)
Experience with certificates of conformance and inspection documentation
Ability to adapt to new technology and software
Excellent visual acuity to detect defects in complex products
Must be willing to undergo a background check
Must be ITAR compliant

Job Responsibility

Hand tool set ups to get through receiving inspection
Supporting the Receiving department to reduce a backlog of machined rocket parts and associated documentation
Perform detailed inspections—visual, dimensional, and physical—on components, assemblies, and raw materials throughout various production phases (including in-process, final, and first article) to verify compliance with engineering drawings and specifications
Operate and utilize precision measuring instruments such as micrometers, dial indicators, gauge blocks, height gauges, and profilometers to validate part conformity
Conduct surface plate inspections and statistical lot sampling based on quality requirements
Apply sharp visual inspection skills to identify workmanship issues and product defects, including damage such as burrs, scratches, loose fasteners, dings, and inadequate edge distances
Identify and categorize nonconformities and confirm that corrective actions or rework have been properly executed
Examine and approve First Article Inspection (FAI) reports, ensuring all documentation is complete, accurate, traceable, and compliant with applicable standards
Audit and confirm the integrity of supporting documentation to ensure alignment with industry and commodity-specific quality requirements
Cross-check shipping documentation for accuracy, confirming part numbers, serial numbers, change notices, and final destination data are correct

New

Quality Inspector - Mechanical - Level 2

We’re hiring for a Quality Mechanical Inspector position in Hawthorne, CA, on a ...

Location

United States , Hawthorne; Los Angeles; Torrance

Salary:

30.00 - 33.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

5+ years of hands-on experience with precision mechanical parts inspection
Strong ability to read and interpret manufacturing drawings and industry/commodity standards
Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., indicators, micrometers, calipers, height gauges)
Experience with certificates of conformance and inspection documentation
Ability to adapt to new technology and software
Excellent visual acuity to detect defects in complex products
Must be a U.S. citizen or U.S. lawful permanent resident (green card holder)

Job Responsibility

Conducting precision mechanical inspections at the client supplier in Hawthorne, CA
Perform precision inspection verifications on mechanical parts, components, assemblies, and materials
Inspection may include, but is not limited to, purchased parts, in-process and final assemblies, and materials for workmanship and conformance to specifications/drawings
Perform surface plate inspection of the first article, in-process, and lot sample parts if required
Utilize inspection equipment such as micrometers, gauge blocks, dial indicators, height gauges, optical comparators, profilometers, and coordinate measuring machines (CMMs) if necessary
Visual acuity and the ability to detect defects in highly complex products
Verify documentation packages to industry/commodity-specific standards
Classify defect types and verify rework conducted during the time of the inspection

What we offer

50% hourly rate for any travel time ("p2p")
Mileage reimbursement at the US gov't rate ($0.70 per mile driven). Untaxed

Fulltime

New

Quality Inspector - Mechanical - Level 2

We’re hiring for a Quality Mechanical Inspector Level 2 position in Hawthorne, C...

Location

United States , Hawthorne

Salary:

30.00 - 33.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

3+ years of hands-on experience with precision mechanical parts inspection
Strong ability to read and interpret manufacturing drawings and industry/commodity standards
Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., micrometers, calipers, height gauges)
Ability to adapt to new technology and software
Excellent visual acuity to detect defects in complex products
Must be willing to undergo a background check
Must be ITAR compliant

Job Responsibility

Perform detailed inspections—visual, dimensional, and physical—on components, assemblies, and raw materials throughout various production phases (including in-process, final, and first article) to verify compliance with engineering drawings and specifications
Operate and utilize precision measuring instruments such as micrometers, dial indicators, gauge blocks, height gauges, and profilometers to validate part conformity
Conduct surface plate inspections and statistical lot sampling based on quality requirements
Apply sharp visual inspection skills to identify workmanship issues and product defects, including damage such as burrs, scratches, loose fasteners, dings, and inadequate edge distances
Identify and categorize nonconformities and confirm that corrective actions or rework have been properly executed
Receiving shipping documentation for accuracy, confirming part numbers, serial numbers, change notices, and destination data are correct
Assure appropriate packaging, preservation, and delivery handling upon receiving

Fulltime

New

Quality Inspector - Mechanical - Level 2

We’re hiring for a Quality Mechanical Inspector position in Long Beach, CA. The ...

Location

United States , Long Beach

Salary:

30.00 - 33.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

5+ years of hands-on experience with precision mechanical parts inspection
Strong ability to read and interpret manufacturing drawings and industry/commodity standards
Proficient in GD&T and validating dimensions (tolerances ≥.005”) using hand tools (e.g., indicators, micrometers, calipers, height gauges)
Experience with certificates of conformance and inspection documentation
Ability to adapt to new technology and software
Excellent visual acuity to detect defects in complex products
Must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with ITAR

Job Responsibility

Perform precision inspection verifications on mechanical parts, components, assemblies, and materials
Work with receiving department to burn down a back log of parts (machined rocket parts) and paperwork
Inspection may include, but is not limited to, purchased parts, in-process and final assemblies, and materials for workmanship and conformance to specifications/drawings
Perform surface plate inspection of the first article, in-process, and lot sample parts if required
Visual acuity and the ability to detect defects in highly complex products
Verify documentation packages to industry/commodity-specific standards
Classify defect types and verify rework conducted during the time of the inspection

Parttime

Quality Inspector - Mechanical - Level 2

SQA Services

Location:
United States , Los Angeles ▼
Anaheim
Temecula
Rancho Dominguez
Lake Forest
Valencia
Ontario
Perris
Santa Ana
Vista
Gardena
Poway
Rosemead
Camarillo
Newbury Park

Category:
Quality Control

Contract Type:
Contract work

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 02, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Quality Inspector - Mechanical - Level 2

Quality Inspector - Mechanical - Level 2

Quality Inspector - Mechanical - Level 2

Quality Inspector - Electromechanical - Level 2

Quality Inspector - Electromechanical - Level 2

Quality Inspector - Mechanical - Level 2

Quality Inspector - Mechanical - Level 2

Quality Inspector - Mechanical - Level 2

Quality Inspector - Mechanical - Level 2

Quality Inspector - Mechanical - Level 2

SQA Services

Location:United States , Los Angeles ▼AnaheimTemeculaRancho DominguezLake ForestValenciaOntarioPerrisSanta AnaVistaGardenaPowayRosemeadCamarilloNewbury Park

Category:Quality Control

Contract Type:Contract work

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 02, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Quality Inspector - Mechanical - Level 2

Quality Inspector - Mechanical - Level 2

Quality Inspector - Mechanical - Level 2

Quality Inspector - Electromechanical - Level 2

Quality Inspector - Electromechanical - Level 2

Quality Inspector - Mechanical - Level 2

Quality Inspector - Mechanical - Level 2

Quality Inspector - Mechanical - Level 2

Quality Inspector - Mechanical - Level 2

Location:
United States , Los Angeles ▼
Anaheim
Temecula
Rancho Dominguez
Lake Forest
Valencia
Ontario
Perris
Santa Ana
Vista
Gardena
Poway
Rosemead
Camarillo
Newbury Park

Category:
Quality Control

Contract Type:
Contract work

Job Posted:
January 02, 2026