Quality Inspector – Composites Job at SQA Services (Tallassee)

Composites - Quality Inspector (Level II - Contract)

SQA Services is hiring immediately in Tallahassee, Alabama, for Level II Composi...

Location

United States , Tallassee; Dallas; Charleston; Chandler; Los Angeles; Wichita

Salary:

30.00 - 35.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

5+ years inspecting aerospace composite structures (Level II equivalent)
Strong defect recognition and dimensional inspection skills
Experience with durometer testing (certification provided if needed)
Ability to read engineering drawings and write clear inspection reports

Job Responsibility

Perform visual, dimensional, depth gauge, and Shore A durometer inspections on composite panels
Verify compliance to engineering drawings and specifications
Document inspection results in MES or digital quality systems
Support MRB verification and maintain a target throughput of 8 panels/day

What we offer

Airfare, hotel, rental car, and meals covered
Per Diem Available

Fulltime

Defense - Quality Inspector

This role is at Spirit AeroSystems, Inc., a wholly owned subsidiary of The Boein...

Location

United States , Wichita

Salary:

24.81 - 41.27 USD / Hour

Boeing

Expiration Date

Until further notice

Requirements

Ability to perform in one or more of the following classifications: Systems/Payload Structures Mechanic A, Assembly Mechanic A, Fuselage Assembly Mechanic A, Underwing Composites Mechanic A, Metals Mechanic A, Process Mechanic A
Ability to certify for Systems inspection function
Ability to investigate and document Root Cause analysis and Corrective action
Ability to determine and submit test and investigation statements
Ability to perform process and hardware audits and surveillances
Ability to perform all functions associated with Level B requirements
Candidates must be able to apply and obtain a security clearance
Must be able to secure Program Access approval
All applicants must be willing and able to work any shift, including alternative work weeks
All Candidates must pass the WorkKeys Assessment

Job Responsibility

Assist in training as applicable to job roles
Investigate and document Root Cause analysis and Corrective action (non-disciplinary)
Determine and submit test and investigation statements
Perform process and hardware audits and surveillances
Perform all functions associated with Level B requirements

What we offer

Competitive base pay and variable compensation opportunities
Health insurance
Flexible spending accounts
Health savings accounts
Retirement savings plans
Life and disability insurance programs
Paid and unpaid time away from work
Generous company match to your 401(k)
Industry-leading tuition assistance program
Fertility, adoption, and surrogacy benefits

Fulltime

Quality Inspector - Operations

We are seeking an Inspector to support composite fuselage and propulsion fabrica...

Location

United States , Wichita

Salary:

24.81 - 41.27 USD / Hour

Boeing

Expiration Date

Until further notice

Requirements

Must be willing and able to work any shift
Must pass a vision exam
Proficiency in basic computer operations
Ability to work inside aircraft and tight spaces, including overhead and under-head tasks
All Candidates must pass the WorkKeys Assessment (workkeys.com) or provide verification that they have passed the WorkKeys Assessment
Must present two (2) forms of identification for WorkKeys Assessment

Job Responsibility

Composite Fuselage fabrication and assembly, Composite Propulsion fabrication, and all propulsion assembly statement of work
Perform systems inspection function (DIT-MCO, HIRF, Skydrol, photogrammetry, etc)
Use and interpret drawings, inspection manuals and specifications, shop mathematics precision measuring instruments, specialized inspection machines, tools and equipment
Experience working with Quality Management System Policies and Procedures
Working knowledge of Company Policies, Procedures and Specifications
Overall working knowledge of production processes
Contact other company organizations or customer representatives, as required to coordinate and accomplish work assignments
Communication skills written and verbal will be necessary as well as utilizing good computing skills
Operate testing machines, calculate and record results
Maintain certifications as required

What we offer

Competitive base pay and variable compensation opportunities
Opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work
Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
May be eligible for a $5,000 state of Kansas Aviation tax credit for up to five years

Fulltime

Defense - Quality Inspector

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

United States , Wichita

Salary:

24.81 - 41.27 USD / Hour

Boeing

Expiration Date

Until further notice

Requirements

Candidates must be eligible to apply for, obtain, and maintain a Department of Defense (DoD) security clearance
Must be able to secure Program Access approval
All applicants must be willing and able to work any shift, including alternative work weeks
Experience required in one or more of the following: familiarity with MBD, primarily Catia V5 and Enovia, including GD&T tolerancing
familiarity in SAP, Military Enterprise Resource Planner (mERP), but not required
cross-trained to support both major assembly and composite fabrication, so experience in both disciplines is preferred
Sikorsky DQR experience preferred but not required
Composite Inspection
Assembly Inspection
Fabrication Inspection

Job Responsibility

Possess the skills/knowledge to perform in one or more of the following classifications: Systems/Payload Structures Mechanic A Assembly Mechanic A Fuselage Assembly Mechanic A Underwing Composites Mechanic A Metals Mechanic a Process Mechanic A
Ability to certify for Systems inspection function
Assist in training as applicable to job roles
Ability to investigate and document Root Cause analysis and Corrective action (non-disciplinary)
Determine and submit test and investigation statements
Perform process and hardware audits and surveillances
Perform all functions associated with Level B requirements

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Kansas Tax Credit: Join Spirit AeroSystems’ Kansas team and you may be eligible for a $5,000 state of Kansas Aviation tax credit for up to five years

Fulltime

Composites Inspector

Location

United States , Tallassee

Salary:

Not provided

SQA Services

Expiration Date

Until further notice

Requirements

5 or more years of hands-on experience inspecting aerospace composite structures at a Level II (or equivalent) inspection level
Experience performing visual composite inspections, dimensional measurements, and durometer hardness testing, and documenting results in MES or digital quality systems
Available to start immediately and work full-time (with overtime) 3rd shift for a contract assignment
Willing to relocate to Tallassee, Alabama, and work on a contract basis

What we offer

per diem and travel expenses provided

Fulltime

Defense - Quality Inspector

This role is at Spirit AeroSystems, Inc., a wholly owned subsidiary of The Boein...

Location

United States , Wichita

Salary:

24.81 - 41.27 USD / Hour

Boeing

Expiration Date

Until further notice

Requirements

Candidates must be able to apply and obtain a security clearance
Must be able to secure Program Access approval
All applicants must be willing and able to work any shift, including alternative work weeks
Selected candidate will possess a familiarity with MBD, primarily Catia V5 and Enovia, including GD&T tolerancing
Selected candidate will be familiar in SAP, Military Enterprise Resource Planner (mERP), but not required
Selected candidate will be cross-trained to support both major assembly and composite fabrication, so experience in both disciplines is preferred
2+ years Composite Mechanic
2+ years Assembly Mechanic
Must be willing and able to work any shift
All Candidates must pass the WorkKeys Assessment (www.workkeys.com) or provide verification that they have passed the WorkKeys Assessment

Job Responsibility

Possess the skills/knowledge to perform in one or more of the following classifications: Systems/Payload Structures Mechanic A Assembly Mechanic A Fuselage Assembly Mechanic A Underwing Composites Mechanic A Metals Mechanic a Process Mechanic A
Ability to certify for Systems inspection function
Assist in training as applicable to job roles
Ability to investigate and document Root Cause analysis and Corrective action (non-disciplinary)
Determine and submit test and investigation statements
Perform process and hardware audits and surveillances
Perform all functions associated with Level B requirements

What we offer

Generous company match to your 401(k)
Industry-leading tuition assistance program pays your institution directly
Fertility, adoption, and surrogacy benefits
Up to $10,000 gift match when you support your favorite nonprofit organizations
Eligible for a $5,000 state of Kansas Aviation tax credit for up to five years

Fulltime

Quality Source Inspector - Mechanical - Level II

Location

United States , New Kensington; Pittsburgh

Salary:

Not provided

SQA Services

Expiration Date

Until further notice

Requirements

Experience with GD&T
Familiarity with precise measurement hand tools for mechanical inspections
Experience with Quality Inspections (e.g., Electromechanical, Machining, Composites)
Experience with Certification of Conformances

Job Responsibility

Travel to one or more supplier sites to support source inspections on an as needed basis

Parttime

Quality Mechanical Inspector

Now urgently hiring a Quality Mechanical Inspector. This role will primarily inv...

Location

United States , Brownsville

Salary:

29.00 - 32.00 USD / Hour

SQA Services

Expiration Date

Until further notice

Requirements

Strong working knowledge of inspection tools (e.g., calipers, micrometers, height gauges)
GD&T (Geometric Dimensioning & Tolerancing) experience required
Experience with Coordinate Measuring Machines (CMM)
Must be a U.S. citizen and able to pass a background check
Willingness to travel 20-30% of the time
Flexibility to work part-time with potential for full-time, depending on travel willingness and project demands

Job Responsibility

Conduct in-process and final mechanical inspections of composite and mechanical parts
Perform precise mechanical inspections at various client-supplier sites in Brownsville and Austin, TX
Interpret standard manufacturing drawings according to industry standards
Utilize inspection tools such as calipers, micrometers, height gauges, and thread gauges
Engage in ongoing training and collaboration with industry experts
Maintain accurate and thorough inspection records to ensure product quality

Fulltime

Select Country

Quality Inspector – Composites

Requirements

What we offer

Looking for more opportunities?