CrawlJobs Logo
Clark Construction Company Logo Clark Construction Company · Quality Control

Quality Control Specialist (Mechanical)

United States, Bethesda · Job Posted February 20, 2026
Apply Position
Job Link Share

Job Description

The Quality Control Specialist (Mechanical) is responsible for verifying the installation, testing, and functional performance of all mechanical systems, including HVAC, plumbing, and controls. The goal is to ensure systems are installed correctly, safely, and operate as designed.

Job Responsibility

  • Review contract documents (plans and specifications) and subcontractor submittals to ensure contract compliance.
  • Inspect and verify the installation of ductwork, piping, insulation, chillers, boilers, pumps, air handling units (AHUs), and related mechanical and plumbing equipment for compliance with the contract documents, approved submittals and applicable building codes.
  • Ensure all mechanical and plumbing installations conform to all contract documents and building codes and standards such as ASME, ASHRAE, and NFPA.
  • Witness and verify installation, startup, testing and commissioning of HVAC and plumbing equipment and systems.
  • Work closely with the project management team, subcontractors, and third-party inspectors to resolve non-conforming work and close out punch list items promptly.

Requirements

  • Bachelor's degree in Mechanical Engineering or a related field. Previous and relevant work experience in place of degrees is applicable
  • Minimum 5 years of experience in mechanical construction, piping, HVAC installation, or quality assurance/control.
  • Takes initiative and personal responsibility to always deliver value and excellence
  • Uses expertise to create a vision and aligns the team to deliver/achieve desired outcomes
  • A track record of establishing/contributing to creative strategic solutions
  • Ability to communicate effectively with, persuade, and gain “buy-in” from, a broad range of stakeholders (e.g., executive team, leadership team, Business Unit Leaders, direct reports, clients, trade partners, and third party providers
  • Alignment to Clark Standards of Excellence: self-motivated, results oriented, adaptable, team player, accountable, ethical, innovative, resilient, builds relationships, builds people/teams and followership, sets direction and executes
Clark Construction Company - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Quality Control Specialist (Mechanical)

8 matching positions

QC Specialist

Quality Control Specialist ensures that all museum exhibits and other MOI produc...
Location
Location
Croatia , Oroslavje
Salary
Salary:
Not provided
museumofillusions.com Logo
Museum of Illusions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum Bachelor’s degree in Engineering, with an emphasis on Mechanical engineering, or related field
  • At least 3+ years of related experience in QC in manufacturing or R&D
  • Ability to interpret technical drawings and design specifications
  • Knowledge of quality standards (ISO, GMP, etc.) and regulatory requirements
  • Strong attention to detail and analytical skills
  • Excellent communication and problem-solving abilities
  • Fluent English skills (written and spoken)
  • Category B driver's license
Job Responsibility
Job Responsibility
  • Perform testing of exhibit prototypes and materials
  • Perform quality checks of final products at suppliers location
  • Verify compliance with design specifications, durability standards, and safety regulations
  • Record inspection results, non-conformances, and corrective actions
  • Assist in root cause analysis and continuous improvement initiatives
  • Work closely with R&D team to identify potential design or material issues early in development
  • Participate in customer complaints analysis
  • Coordinate with other teams to resolve quality concerns promptly
  • Perform internal audits and supplier audits
  • Write procedures, work instructions and QC plans
What we offer
What we offer
  • Full-time salaried position with a bonus structure
  • Supplementary and additional health insurance
  • A young, vibrant and ambitious team to work with
  • A fun, exciting and industry-leading concept to manage and develop in Zagreb
  • Reimbursement of travel expenses and provision of the warm meal
  • Fulltime
Read More
Arrow Right

Project Quality Control Coordinator

Location
Location
Azerbaijan , Baku
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Higher education
  • Must have at least 3 years’ experience in a similar role in Oil & Gas industry
  • Welding qualification CSWIP 3.1 (preferred 3.2) or IWI B (Preferred IWI C)
  • Knowledge of ISO 9001 standards
  • Knowledge of advanced NDT technologies
  • Capability to check the calibration of NDT instruments and certification validity
  • Knowledge in Coating and Painting inspection (qualification BGAS Level 2 or equivalent is preferable)
  • Capability to plan, execute, report inspection and test according to Quality Control Plan
Job Responsibility
Job Responsibility
  • Support the implementation of the Project Quality Management System (PQMS) activities within the project
  • Support Project Quality Manager in supervising the project Quality Control activities
  • Report to Project Quality Manager information and data about Project in line with Corporate and Offshore Division Guidelines
  • Act as focal point for quality control related matters within the project and in liaison with external entities
  • Verify the implementation of the inspection, control and test notification process
  • Support the Project Quality Manager in defining the Project Quality Control System and in identifying needed project quality control plans and QC procedures in accordance with the Company Quality Management System
  • Support the Project Quality Manager in planning and allocating QC functions to the project, ensure coordination of assigned personnel
  • Review Quality Control Plans, ensure that the tests, controls and inspections are carried out according to Quality Control Plans/Inspection Test Plans and that personnel have access to all required project documentation
  • Check procedures and equipment to be used in tests, controls and inspections and agrees on the applicable operating procedures with the organization in charge of the works
  • Review applicable QC procedures, including those relating to special processes
Read More
Arrow Right

Group Quality Manager

The Group Quality Manager (Mechanical) is responsible for leading and continuous...
Location
Location
Ireland , Dublin
Salary
Salary:
Not provided
designergrp.com Logo
Designer Group Ltd
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Recognised third-level qualification or trade qualification with extensive mechanical systems experience
  • Minimum 5+ years’ experience in mechanical quality assurance, quality control, or mechanical engineering leadership
  • Strong working knowledge of ISO 9001 quality management systems (internal auditor experience desirable)
  • Experience across relevant standards and codes (ASME, EN, BS, PED, WRAS, DW, ASTM, SMACNA)
  • Solid understanding of piping materials, fabrication, welding, installations, NDT, and testing
  • Ability to read and interpret P&IDs, isometrics, schematics, GAs, as-builts
  • European Welding Inspection qualification (e.g. CSWIP 3.1) advantageous
  • Experience with digital QA platforms such as Procore, Eida, or similar
  • Strong leadership, communication, and stakeholder management skills
Job Responsibility
Job Responsibility
  • Own and maintain the Group Mechanical Quality Management System (ISO 9001:2015), including IMS and related platforms
  • Lead mechanical quality strategy across all regions, ensuring consistent application of standards, specifications, and procedures
  • Act as the senior quality authority for mechanical systems across projects and fabrication environments
  • Provide proactive quality leadership from project startup through to mechanical completion and final handover
  • Support project teams with risk management, issue resolution, and compliant solutions across all quality milestones
  • Review installations against Designer Group quality plans, ITPs, project specifications, and client standards
  • Coordinate and manage the mechanical QA function, including Field QA, Test Pack Engineers, Welding Coordinators, Inspectors, and NDT specialists
  • Drive a “Right First Time” culture through coaching, workshops, audits, inspections, and First-of-a-Kind (FOAK) approvals
  • Train and mentor teams on quality best practice and continuous improvement
  • Own mechanical quality reporting, KPIs, dashboards, and system-of-record platforms
What we offer
What we offer
  • Competitive salary package aligned to experience and expertise
  • Senior, group-wide role with real influence on delivery and standards
  • Long-term career development and professional training
  • Exposure to complex, high-profile international projects
  • A collaborative culture where quality, safety, and people matter
  • Fulltime
Read More
Arrow Right

Mechanical and Plumbing Quality Control Specialist

The Mechanical and Plumbing Quality Control (QC) Specialist will conduct indepen...
Location
Location
United States , St Petersburg
Salary
Salary:
Not provided
powerdesigninc.us Logo
Power Design
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Solid knowledge of the multi-family mechanical and plumbing industry and relevant codes, including IMC, IPC, NCCER and ASHRAE standards
  • Experience with Hydronic piping systems, Chiller, Boiler, Water Source Heat Pump, and Refrigeration systems
  • 8-10 years mechanical and plumbing experience
  • Journeyman plumber’s or HVAC technician’s license required
  • master’s license preferred
  • Must be detail-oriented and quality-driven
  • Able to travel up to 50% of the time
  • Strong written, verbal, and interpersonal communication skills required
  • Proficient in Microsoft Office, including Excel, Word, and Outlook
  • Ability to interact with employees at all levels, from field personnel to executive management
Job Responsibility
Job Responsibility
  • Prepare for evaluation by gathering and reviewing contract documents, reports, and coordination drawings, as well as meeting with key personnel to discuss project specifics
  • Follow work program steps for each mechanical and plumbing scope to determine if job conditions meet expectations
  • Identify and document any items observed needing improvement/attention in addition to specific work program items
  • Provide training on installation methods and/or best practices to project teams when needed
  • Represent the Quality Assurance department positively through interaction with Project Superintendent and Foreman
  • Deliver accurate and concise evaluation reports and photo documentation
  • Communicate with customers prior to evaluation, while on-site, and following evaluation to discuss progress, satisfaction, and needs
  • Meet with executive management and project teams to communicate evaluation results and recommend action plans for improvement
  • Render impartial and unbiased judgment by remaining independent and objective
  • Maintain accurate, organized records
Read More
Arrow Right

Senior Quality Control Engineer

We have recently expanded Geomiq and created a new Quality hub in India, Bengalu...
Location
Location
India , Bengaluru
Salary
Salary:
Not provided
geomiq.com Logo
Geomiq
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree or equivalent in Mechanical, Electrical, or Manufacturing Engineering
  • Able to read and understand technical Engineering Drawings (ideally for CNC machined parts at a minimum)
  • 5 to 8 years experience working as a Quality Control Specialist within the manufacturing industry
  • Experience in manufacturing of metal and plastic components (CNC, Injection Moulding, Sheet Metal would be a bonus)
  • Track record of excellent problem-solving and process improvement
  • Ability to deliver results in an ambiguous environment where decisions must be made quickly
  • High attention to details and data-driven approach
  • Experience working in a fast-paced environment
Job Responsibility
Job Responsibility
  • Conduct regular inspections and testing of manufactured parts to ensure they meet predefined specifications and quality standards. This includes using various measurement and testing tools to check dimensions, functionality, and durability of the products
  • Verify that all products align with the technical drawings and specifications. This involves detailed comparisons against engineering drawings and ensuring that every component matches the required tolerances and parameters
  • Maintain accurate records of quality checks, results of inspections, and testing processes
  • Prepare detailed reports summarising findings and share with management and relevant departments. Ensuring all job cards are accurately completed and filled out
  • Work collaboratively with the wider team to resolve issues, determine root causes, and suggest corrective actions to prevent recurrence
  • Regularly communicate with stakeholders involved in the orders to provide updates and collect feedback
  • Lead initiatives aimed at continuous improvement in quality control practices
What we offer
What we offer
  • Competitive Salary
  • Stocked Pantry
  • Public National Holidays: 3 fixed national holidays, including Republic Day, Independence Day, and Gandhi Jayanti
  • Flexible Regional Public Holidays: 7 additional days
  • Earned Vacation Leave: 15 days of paid vacation annually
  • Sick Leave: 5 days of paid sick leave
  • Birthday Leave: an extra day off
  • Professional Development: training programs, mentorship, and internal promotion opportunities
  • Lunch provided
  • Fulltime
Read More
Arrow Right

Document Control Specialist

The Document Control Specialist supports the Quality team by managing and mainta...
Location
Location
United States , Greenville
Salary
Salary:
Not provided
synapse-its.com Logo
Synapse - Manufacturing
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Able to read and understand mechanical drawings from SOLIDWORKS
  • Attention to detail is required
  • Analytical & problem-solving skills & ability to multitask
  • Able to work independently with minimal supervision.
  • Highly organized with meticulous attention to detail and follow-through
  • Excellent interpersonal, verbal and written communication skills
  • Effectively communicate and understand instructions both verbally and written
  • Reliable, dependable, and able to work overtime when required
  • Able to work in a team environment and take direction well
  • Computer literacy, proficient in the use of Microsoft Office Suite
Job Responsibility
Job Responsibility
  • Ensures that company quality system documentation are adequately approved, controlled, and maintained
  • Proposes and implements improvements to document control systems
  • Prepares and processes approvals for quality system document changes
  • Maintain shared documented processes and engineering drawings with an active spreadsheet
  • Ensure proper accessibility and maintenance of documents
  • Ensure that all technical documents are collected and registered in their correct system.
  • Notify personnel of updated document versions and how to access them.
  • Works with documents and records across various departments.
  • Input and maintain data in company ERP system
  • Maintain regular and punctual attendance
Read More
Arrow Right

Quality Engineer

As a Quality Engineer, you will play a critical role in ensuring the quality and...
Location
Location
Portugal , Porto
Salary
Salary:
Not provided
geomiq.com Logo
Geomiq
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree or equivalent in Mechanical, Electrical, or Manufacturing Engineering
  • Able to read and understand technical Engineering Drawings (ideally for CNC machined parts)
  • Minimum 1 year experience working as a Quality Control Specialist within the manufacturing industry
  • Experience in manufacturing of metal and plastic components (CNC, Injection Moulding, Sheet Metal would be a bonus)
  • Track record of excellent problem-solving and process improvement
  • Ability to deliver results in an ambiguous environment where decisions must be made quickly
  • High attention to details and data-driven approach
Job Responsibility
Job Responsibility
  • Oversee quality control and logistics for all orders processed through the hub
  • Collaborate closely with manufacturing partners to ensure adherence to quality standards and delivery timelines
  • Act as the primary point of contact for resolving post-order quality and logistics issues
  • Ensure a high level of customer satisfaction through effective issue management
  • Manage the Engineering Change Request (ECR) process efficiently
  • Champion a 'Right First Time' approach across all processes
  • Maintain composure and sound judgment when making decisions under pressure
  • Identify and escalate systemic issues or improvement opportunities to management
  • Maintain 100% confidentiality of Geomiq's supply chain and customer information
  • Ensure proper redaction where required and escalate uncertainties to management before proceeding
What we offer
What we offer
  • Competitive Salary: We offer pay that reflects your skills and the value you bring
  • Stocked Kitchen: Enjoy snacks, fresh fruit, and drinks all day
  • 22 Days Annual Leave: Recharge with 22 days off, plus public holidays
  • Birthday Off: Take an extra day to celebrate your birthday
  • Christmas Shutdown: Relax over the holidays with additional company-wide time off
  • Pet-Friendly Office: Bring your dog to our pet-friendly workspace
  • Team Events: Connect with colleagues through monthly team-building activities
  • Career Growth: Benefit from our focus on internal promotions and development
  • Fulltime
Read More
Arrow Right

Specialist - Quality Excellence

We are seeking a highly skilled and dynamic Quality Control & FMEA Specialist wi...
Location
Location
India , Chennai
Salary
Salary:
Not provided
nordex-online.com Logo
Nordex Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree (minimum) or Master’s degree in Mechanical or Electrical Engineering
  • Minimum 3 years of project management experience, preferably in multi-national environments
  • Minimum 2 years of experience developing quality control plans derived from P‑/D‑FMEAs
  • Knowledge and hands-on experience in APQP, Six Sigma, FMEA methodologies, SPCs, and quality tools (certifications preferred)
  • At least 3 years of experience working with global teams, demonstrating adaptability and strong organizational skills
  • Strong understanding of supply chain quality processes and control plan requirements
  • Excellent communication skills in English (mandatory)
  • German or Spanish is an added advantage
  • Creative, structured, humorous, and persuasive—able to communicate and collaborate effectively with cross-functional teams
Job Responsibility
Job Responsibility
  • Verify that end-to-end control plans (including SPCs) are fully aligned with P‑FMEAs and D‑FMEAs
  • Ensure all critical and special characteristics are accurately derived from FMEAs and translated into robust control plans
  • Lead ongoing improvements to baseline quality standards and best practices (MSA, Lean, Kaizen, APQP frameworks)
  • Identify improvement opportunities and implement preventive quality measures across processes
  • Own and manage lessons learned documentation in alignment with FMEAs and control plan updates
  • Ensure consistent application of updated standards across teams and projects
  • Coordinate with internal and external stakeholders to ensure alignment on project timelines, cost expectations, and customer requirements
  • Facilitate smooth collaboration with global teams and ensure successful project deliverables
Read More
Arrow Right