Quality Assurance Tech Job at GROWMARK FS, LLC (Elizabethtown)

Quality Assurance Tech- 1

Quality Assurance Tech- 1 position at a Medical Devices Company. Entry level rol...

Location

United States , El Paso

Salary:

9.00 - 13.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

Has basic skills training in an analytical/scientific method or operational process area.
Works within clearly defined SOPs and/or scientific methods and adheres to quality guidelines.
Works with a high degree of supervision and has minimal discretion.
Demonstrates knowledge of basic operating procedures for a specific functional area
Accountable for the execution of specific tasks with oversight of a supervisor
Has some effect on quality, cost, and/or productivity
Need US Citizens Or GC Holders Only

Job Responsibility

Is entry level with limited experience.
Develops skills in basic tasks, techniques and procedures within one skill area/process/method.
Maintains appropriate licenses/training/certifications, as needed.
Applies basic knowledge and skills to complete routine tasks consisting of prescribed steps
Responsible for developing and implementing a compliant and cost-effective quality system that assures products and services are reliable, safe and effective.

Fulltime

New

Quality Assurance Representative – Avionics Tech III, MQ-9

The USMC MQ-9 CLS Quality Assurance Representative is a highly qualified aircraf...

Location

United States , Kaneohe Bay

Salary:

52.40 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High School graduate or equivalent
Must have an active Secret US Government clearance with ability to obtain Top-Secret. Note: US Citizenship is required to obtain a Secret Clearance
Minimum of ten years performed within the last fifteen years of experience performing repairs of high-performance aircraft and/or MQ-9 remotely piloted aircraft and associated Ground Control Stations (GCS)
Minimum of three years of aircraft maintenance experience as an aircraft quality assurance representative/specialist in military aviation (E-6 or higher), or civil service (WG-10), or Government aviation maintenance Contractor Inspector
Minimum of three years MQ-9 maintenance experience either as Aircraft Mechanic or Avionics Technician
Aircraft Mechanic or Avionics Technician Qualified
Specialized training courses regarding aviation maintenance
Successful completion of the Navy Quality Assurance Program
Strong interpersonal and organizational abilities
Computer/typing skills and knowledge of applicable software

Job Responsibility

Perform O-Level QA on MQ-9 aircraft and/or Ground Control Stations (GCS)
Work from blueprints, maintenance manuals, quality control procedures, quality instructions, contractor standard specifications, Naval inspection manual/cards and military technical directives
Inspect aircraft mechanical, electrical and electronic systems assemblies and engines using general and special test equipment
Monitor all required inspections of maintenance procedures and systems checkouts and is authorized to inspect safety of flight related maintenance actions
Possess a thorough knowledge of flight line operations along with the ability to comply with DAFI 21-101, DAFI 21-103, NAVAIRINST 3710.1 (series) and CNAFINST 4790.2 (series) as applicable to MQ-9 maintenance
Ability to recognize Unmanned Aircraft System (UAS) aircraft discrepancy trends
develop trend analysis reports
compile and organize data
and brief verbally or in writing to the Quality Manager
Site Manager

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Quality assurance engineer - High-tech Manufacturing

In our high-tech small production runs, single part and prototype production, yo...

Location

Germany , Berlin

Salary:

Not provided

ASML

Expiration Date

Until further notice

Requirements

University degree in engineering or natural sciences, or an equivalent qualification with solid knowledge of quality management methods (e.g. Six Sigma, PDCA, Continuous Improvement)
Professional experience in the production of technical products or in quality-related industrial functions
Strong hands-on knowledge of common quality methods (e.g. 8D, Ishikawa, 5 Why, SPC, FMEA)
Solid technical understanding and ability to read, analyze, and assess technical drawings, specifications, and process descriptions
Ability to perform structured root-cause analyses and derive, implement, and track appropriate corrective measures
Ability to handle quality metrics, reports, and documentation confidently
Fluent communication in English and German

Job Responsibility

Main point of contact for quality-related topics for assigned products and defined parts of the production process
Support and improve quality-relevant production processes to ensure stable and efficient manufacturing
Analyze and manage internal quality deviations, including decisions on rework or product release and coordination with relevant stakeholders
Ensure product quality by performing checks at defined inspection points and deciding on product release for shipment
Create, maintain, and manage quality documentation, reports, and deviation records
Drive continuous improvement activities by tracking quality measures, supporting problem-solving initiatives, and contributing to operational projects
Strengthen quality awareness by supporting training activities and collaborating closely with Manufacturing and Engineering teams

What we offer

Remuneration according to company collective agreement (with IG Metall) including 13th monthly salary and variable remuneration components
Collective working time: 35 hours/week
Flexible arrangement of daily working hours (depending on the work area)
30 days of vacation
Reimbursement of moving expenses for you and your family (starting from 100 km distance)
Specific advanced training and development opportunities
Access to organized childcare and vacation care
Health and sports offers (e.g. subsidy for sports activities, health days, company doctor, free vaccinations, etc.)
Travel allowance for BVG company ticket or bicycle

Fulltime

Associate Director, Product Quality Assurance

The Associate Director of Product Quality for Cell and Gene Therapy Programs wil...

Location

United States , Cambridge

Salary:

185000.00 - 225000.00 USD / Year

Beam Therapeutics

Expiration Date

Until further notice

Requirements

Bachelors or Advanced degree in scientific discipline
12+ years’ experience in the pharmaceutical/biotech industry in combination with drug substance/drug product manufacture, development and/or quality with at least 4 years of which should have been in a CMC-focused position in Cell and Gene Therapy Quality role
Detailed knowledge and understanding of GMP regulations and Food and Drug Administration (FDA) requirements
Ability to influence without direct authority
Ability to develop into a primary PQL for Beam programs
Excellent verbal and written communication skills, detail-oriented personality and ability to work and drive change across functions
Experience interacting with regulatory health authorities at pre- and post-approval inspection
Strong team player that has a customer service approach and is solution oriented
Attention to detail and the ability to work individually, within a multi-disciplinary team, as well as with external partners and vendors
Excellent listening, communication and interpersonal skills fostering team spirit

Job Responsibility

Provides strategic Quality CMC-focused support based on Program Team timelines, milestones, and regulatory commitments
Drives and takes action on Phase Appropriate Quality strategy for Beam’s products
Performs Quality review/approval of records and documentation related to manufacturing such as process defining documentation
Performs product quality impact assessments for product complaints, manufacturing deviations, OOT/OOS results, MRB, adverse trends, etc
Quality reviewer and approver of select technical documents (e.g. complaints, temperature excursion reports, justification of specification (JoS), specifications, method validations, critical quality attribute (CQA) assessment, comparability, risk assessments, continued process verification (CPV), tech transfer, ad hoc testing / characterization protocols, etc.)
Ad hoc Quality representative on Program Team and CMC Team in support of primary PQL
Ensures alignment with regulatory requirements, industry standards / best practices, and Beam initiatives
Support clinical to commercial analytical control strategy
Strategic and technical support across product lifecycle (manufacturing process and analytical method changes, tech transfer, characterization, comparability, validations, technology improvements, etc.)
Reviews manufacturing process performance, analytical method performance, stability data, etc. for signals / trends / patterns to proactively monitor and if necessary, support mitigations

Fulltime

Product Quality Assurance Engineer – Hardware (Electron Microscopy)

Become a key player in ensuring top-notch quality! We are looking for a Product ...

Location

Czech Republic , Brno

Salary:

Not provided

Sport Vision Czechia s.r.o.

Expiration Date

Until further notice

Requirements

Degree in Electrical Engineering, Electronics, Physics, Mechatronics, or a related field (HW-oriented background preferred)
Strong hands-on experience with hardware debugging and measurement tools (especially oscilloscope-based signal analysis)
Proven ability to analyze electronic circuits, power systems, and embedded hardware behavior
Experience in failure analysis, root cause investigation, and system-level troubleshooting
Understanding of complex multidisciplinary systems (electronics, optics, vacuum, mechanics, embedded SW)
Familiarity with quality and problem-solving methods (8D, RCA, FMEA, CAPA)
Experience from high-tech industries (semiconductor, instrumentation, electron microscopy, or similar) is a strong advantage
Strong analytical mindset and structured approach to problem-solving
Communicative level of English

Job Responsibility

Take ownership of product quality for electron microscopy systems (SEM, TEM, DualBeam) with a strong focus on hardware and or software performance and diagnostics
Perform in-depth hardware analysis using lab equipment (oscilloscope, multimeter, signal analyzers) to identify faults and validate system behavior
Lead root cause analysis of HW or SW-related issues across complex systems (electronics, vacuum, optics, motion control)
Collaborate closely with R&D and production teams to troubleshoot and resolve hardware failures and performance deviations
Define and validate test methodologies for hardware systems, including signal integrity, power stability, and system-level performance
Support manufacturing by optimizing calibration procedures, test setups, and measurement techniques
Review and approve technical documentation, engineering changes (ECO), and deviation reports with a strong understanding of hardware impact
Monitor field performance, reliability data, and customer complaints, focusing on hardware-related failure modes

What we offer

Contribution for changing residence
Cafeteria - individual benefit system
Free language / soft skills / hard skills training courses
Joint company events: sports and social
Extra week of paid vacation
Financial reward for loyalty
Meal vouchers
Financial reward for employee referral or extra time off
Multisport card
Interest-free employee loans

Fulltime

Sr. Specialist I, Product Quality Assurance

The Sr. Specialist I, NC Product Quality Assurance (PQA) will be responsible for...

Location

United States , Durham

Salary:

140000.00 - 185000.00 USD / Year

Beam Therapeutics

Expiration Date

Until further notice

Requirements

Bachelors or Advanced degree in a scientific discipline with 10+ years' experience in the pharmaceutical/biotech industry in combination with drug substance/drug product manufacture, development and/or quality
Knowledge of aseptic processing, and/or cell and gene therapy is preferred
Apply Quality concepts and company policies to resolve issues of moderate complexity in an effective manner
Excellent verbal and written communication skills, detail-oriented personality, and ability to work collaboratively across functions
Knowledge of global regulations and standards
Strong team player that has a customer service approach and is solution oriented
Attention to detail and the ability to work individually as well as within a multi-disciplinary team
Excellent listening, communication and interpersonal skills with a team focus
Consistent delivery of high-quality work
Ability to gown and work in a cleanroom environment

Job Responsibility

Provide Quality oversight of on-the-floor activities including manufacturing shop floor presence during operations
Provide Quality oversight of QC testing
Responsible for ensuring GMP compliance with applicable procedures and production requirements in QC, manufacturing, and facilities operations
Responsible for assisting with product disposition activities of supply produced at the manufacturing facility
Real time review of batch records and labels
Review and approval of manufacturing discrepancies and associated CAPA's
Communicating lot disposition pending issues to management
Aid in the development and ongoing improvement of applicable quality systems for the site
identifying gaps or improvements, authoring and approval of procedures, and providing training, as needed
Review and approve calibration and maintenance work orders and asset inductions

Fulltime

IT Quality Assurance Analyst

Our IT Quality Assurance (QA) Analyst ensures the quality, reliability, stabilit...

Location

Australia , Frenchs Forest

Salary:

Not provided

KFC Australia

Expiration Date

Until further notice

Requirements

Tertiary qualification in Computer Science or a related field
Proven experience in a technical QA role across both manual and automated testing
Experience across an end-to-end testing tech stack (e.g. Playwright (Web), Appium (Mobile), JavaScript/TypeScript, Cucumber BDD and BrowserStack)
Experience building or contributing to test automation frameworks
Ability to work effectively in a dynamic, cross-functional team environment
Resourceful and proactive, with the ability to work autonomously
Strong problem-solving skills with the ability to balance high quality standards with delivery timelines
Ambitious and motivated to grow and develop within a fast-paced technology environment

Job Responsibility

Perform end-to-end testing across restaurant technology platforms
Design, review and execute test cases based on business requirements and real restaurant operational scenarios
Provide ad hoc support to restaurant operations during critical incidents, with occasional on-site support to diagnose and validate issues impacting in-store technology
Support UAT, pilot testing and market rollout validation
Prepare and manage test data aligned to store use cases such as promotions, combos, refunds and multi-tender payments
Log, track and manage defects in Jira, working closely with vendors and global technology teams to drive resolution
Contribute to release readiness, deployment validation and release sign-off activities
Develop, maintain and execute automated test suites across Web, Mobile (iOS/Android), APIs and integrated restaurant systems
Build and enhance scalable automation frameworks using Playwright, Appium, JavaScript/TypeScript and Cucumber BDD
Perform API automation testing using REST (Rest Assured) and GraphQL for microservices-based platforms

What we offer

A culture where you can be your original self
Monthly mobile phone and home internet contributions
Flexible work initiatives, including half day Fridays
Free onsite secure parking at Frenchs Forest
Additional days of leave each year to focus on your Wellbeing
Corporate KFC Culture Club initiatives
Employee discounts at KFC restaurants
Access to Udemy, LinkedIn Learning and ongoing learning opportunities to support your technical development
Exposure to the evolving Yum! global technology ecosystem as new platforms and integrations roll out

Fulltime

Specialist Quality Assurance - Drug Product

Join Amgen’s Mission of Serving Patients. In this vital role you will support th...

Location

United States , Thousand Oaks

Salary:

104287.35 - 141094.65 USD / Year

Amgen

Expiration Date

Until further notice

Requirements

Doctorate degree
OR Master’s degree and 2 years of quality experience
OR Bachelor’s degree and 4 years of quality experience
OR Associate’s degree and 8 years of quality experience
OR High school diploma / GED and 10 years of quality experience

Job Responsibility

Support the Plant Quality Assurance program providing daily oversight of operational activities associated with and supporting the aseptic Drug Product manufacturing areas
Ensure timely delivery and completion of records within our QMS (Deviations, CAPAs, Change Controls etc.)
SOP revision, review and approval
Work order approval
Support tech transfers into the facility
Evaluate compliance issues
Provide recommendations
Assure progress of quality records to completion
Represent the B20 Quality function of projects
Partner with colleagues in Manufacturing, Supply Chain, Facilities and Engineering and Automation

What we offer

A comprehensive employee benefits package, including a Retirement and Savings Plan with generous company contributions, group medical, dental and vision coverage, life and disability insurance, and flexible spending accounts
A discretionary annual bonus program
Stock-based long-term incentives
Award-winning time-off plans
Flexible work models where possible

Fulltime

Select Country

Quality Assurance Tech

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?