Quality Assurance Steel Inspector Job at Kiwi Constructors Ltd. (Guelph)

Quality Control Supervisor

The Quality Control Supervisor is responsible for directing activities of N.D.T....

Location

United States , Blytheville

Salary:

Not provided

Lexicon, Inc

Expiration Date

Until further notice

Requirements

High School diploma or equivalent
Minimum 5 years’ experience in structural steel
At least two years’ quality control and supervisory experience
NDE (non-destructive examinations) qualified is preferred
Certified Welding Inspector & UT LVL II is preferred
Must be able to lift in excess of 100 pounds on occasion
Must have ability to bend, stoop, and climb frequently
The ability to work overtime and regular, punctual attendance is required
Requires some travel with over night stays

Job Responsibility

Directing activities of N.D.T. and Quality Control Inspectors
Performs constant surveillance of fabrication activities including fitting, welding, bolting, lay-down assembly, cleaning and painting
Maintains records of welder qualifications and checks records of inspections
Coordinates with shop supervision to assure timely performance of inspections
Works with maintenance department for calibrating welding machines
Calibrates tapes and paint gauges with inspectors and shop supervision
Prepares weld qualification tests and controls welding and testing thereof
Resolves in-process non-conformance corrections and obtains engineering approval for repairs
Notifies plant supervision and engineering of continuing or recurring problems
Responsible for adhering to all company safety and OSHA regulations

What we offer

Health Insurance
HSA with Employer contributions
Dental Insurance
Vision Insurance
Life Insurance
Disability Income Benefits
Paid Holidays
Paid Vacation
401 (k)

Fulltime

Nde inspector, certified welding inspector (cwi)

Are you ready to start “Building America”? At Lexicon, we're seeking a skilled N...

Location

United States , Little Rock

Salary:

Not provided

Lexicon, Inc

Expiration Date

Until further notice

Requirements

High school diploma or equivalency certificate
Previous fitting and welding experience is required
Must be able to read and understand blueprints and shop drawings and pass an inspector test
Must be able to perform basic math such as addition, subtraction, multiplication, division, geometry and some trigonometry
Current American Welding Society (AWS) Certified Welding Inspector (CWI) certification
OR Currently certified Level II in at least two NDE Methods (VT), (PT), (MT), (UT) to ASNT SNT-TC-1A or equivalent qualification

Job Responsibility

Perform internal and external inspections to determine if a weldment/structure meets the acceptance criteria of a specific code, standard, or document
Interpret codes and specifications in accordance with the drawing requirements
Use a computer to compile and submit data of acceptance or rejection of inspections, as well as for inter-office communications
Recommend and approve repairs as well as perform visual inspection of work in progress and completed work
Monitor welding processes such as gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), flux cored arc welding (FCAW), shielded metal arc welding (SMAW), submerged arc welding (SAW), and plasma arc welding (PAW) to ensure they are performed in accordance with qualified procedures
Verify and document welder qualifications
Verify the compliance of base metals with the applicable specifications
Appraise welding joint designs and joint preparations for compliance with drawing
Verify proper fit, cleanliness, and environmental conditions
Verify tack weld quality

What we offer

Health, Dental, Vision, and Life Insurance
HSA with employer contributions
Life Insurance
Paid Holidays and Vacation
401k with company match
Lexicon University

Fulltime

Specialist - Logistics Quality

Location

India , Chennai

Salary:

Not provided

Nordex Group

Expiration Date

Until further notice

Requirements

Minimum 4–6 years in quality assurance or logistics roles within industrial, manufacturing, or renewable energy sectors
Hands-on involvement in FMEA processes (p-FMEA and d-FMEA) and development of control plans
Experience in supplier quality evaluations and audits, particularly for logistics service providers
Strong background in non-conformity management, including incident reporting and root cause analysis
Practical knowledge of continuous improvement methodologies
Experience working with digital quality tools (ServiceNow, Upvise, ERP systems)
Exposure to global logistics operations and process standardization initiatives
Ability to manage KPIs and performance monitoring for logistics quality activities
Proficiency in ServiceNow, Upvise, MS Office Suite
familiarity with ERP systems and digital quality platforms

Job Responsibility

Quality assurance of major components (Blades, MHOs, Steel Towers, DTRs, HUBs) during outbound transport
Develop the Logistics Quality Control Plan and control methods (checklists) based on p-FMEA, d-FMEA, and specific transport instructions
Participate in p-FMEA analysis for outbound transport of main components
Active member of the Logistics Change Committee and administrator of the “GCM: logistics – INC” group, driving lessons learned and continuous improvement actions
Implement the Outbound Field Support (OFS) role in previously analyzed and required locations
Coordinate with the Logistics Operations team to align the activities of Marine Cargo Surveyors and OFS inspectors according to the assigned transport plans, ensuring smooth execution and compliance with Nordex guidelines
Coordinate OFS at factories, yards, and ports during truck loading/unloading and storage of components according to Nordex transport guidelines
Manage OFS reports and perform KPI analysis
Coordinate Marine Cargo Surveyors at ports according to Nordex transport guidelines and GF01.45.04.02.05 Nordex BIC Process
Manage Marine Cargo Survey reports and KPI analysis

Certified Welding Inspector

HVEA Engineers is seeking Certified Welding Technicians (CWI’s) to perform struc...

Location

United States , greater NY metropolitan area/Hudson Valley Region

Salary:

Not provided

HVEA Engineers

Expiration Date

Until further notice

Requirements

Demonstrated experience performing visual inspection and nondestructive testing of welds
AWS D1.1 or D1.5 experience preferred
Ability to review and interpret structural steel plans, working drawings, and technical specifications
Proficiency in the use of weld inspection tools including
weld gauges, NDT equipment, and micrometers
Ability to read plans and specifications, complete daily work reports
Ability to work independently with minimal supervision
American Welding Society (AWS)/Certified Welding Inspector (CWI)
Valid Class D driver’s license

Job Responsibility

Perform structural steel welding inspection in accordance with AWS standards
Perform visual inspection of non-destructive testing performed by others
Review the performance of inspections completed by subconsultants/others when needed
Interpret construction drawings and specifications on construction projects
Communicate with clients, contractors, supervisors, and other inspectors regarding specifications and qualification test results and site progress
Maintain field notes and related documentation
Prepare daily reports including description of contractor work activities, labor and equipment identification and quantity
Gather data and measurements to be used in the completion of checklists and quality assurance of various construction activities
Recommend approval of the work inspected (in compliance with the Contract Plans and Specifications)
Other duties as assigned

What we offer

Comprehensive group health, dental, vision, short term disability, long term disability and life insurance coverage
A variety of voluntary benefits
Opportunity for professional growth and advancement including tuition reimbursement
Paid time off
Eleven Company paid holidays
401K retirement plan

Fulltime

Senior Subsea Pipeline Marine Inspector

Airswift are a Global Manpower Provider specializing in the Energy, Infrastructu...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering discipline (Mechanical) with demonstrated knowledge and experience
CSWIP 3.4UC Underwater Inspection Controller (Ref. CSWIP Document No.CSWIP-DIV-7-95 – Part 2)
Current / valid BOSIET, TBOSIET, FOET or TFOET certificate (Ref. OPITO requirements), as applicable, in conjunction with an offshore medical certificate
Experience in conducting QMS audits and QA verification programs for various project phases (i.e., Engineering, Procurement, Construction and Installation (specifically, the Repair / Installation of pipelines and their associated infrastructure) would be preferable
At least six (6) years of working experience in Quality Assurance and Control (QA/QC) within the Oil and Gas industry (i.e., onshore and offshore)
Should have a proven history as a lead 3.4UC underwater inspection controller within demanding subsea/offshore projects
Subsea pipeline project experience is highly desired, with emphasis on pipeline operations, integrity assurance/non-destructive testing (NDT) and inspection, maintenance and/or design and construction
Familiarity with marine vessel operations and the organisational responsibility of the (i) Offshore Construction/Installation Manger, (ii) Vessel Master, (iii) Diving and ROV Supervisors, (iv) Client Representative(s), (v) Certifying Authorities, etc.
Knowledge and working experience of underwater inspection (UWI) in the form of visual inspection and non-destructive testing (NDT) conducted by means of the intervention of diver(s) and/or remotely operated vehicle (ROV) or crewed submersible (i.e., either as a practitioner and/or as the result of training or certification conforming to the requirements of CSWIP Document No. CSWIP-DIV-7-95 – Part 1 and 2)
With respect to UWI and other related activities, shall be familiar with (i) relevant subsea applied inspection systems, (ii) recording and processing of data, (iii) quality assurance (QA), (iv) inspection planning and briefing, (v) the capabilities and limitations of divers/ROV’s and submersibles, and (vi) the care and deployment of equipment

Job Responsibility

Ensure compliance with QatarEnergy LNG systems and processes, including the Project Management System. Engage contractors and applicable third-party organisations with a professional approach and maintain a good working level relationship
Have a knowledge of the front end engineering design (FEED) deliverables and engineering study reports to support the implementation of the Project Quality Plan (PQP) and associated Procedures
Review the project Scope of work, to determine the nature, extent, and frequency of quality verification activities
Monitor, evaluate and report the inspection and testing status of the pipeline repair activities
Maintain interface relationships with Subsea Pipeline Repair Installation, and Inspection Contractors (including nominated specialist third-party Contractor organisation(s)), and the applicable regulatory focal points
especially, those functioning offshore
Review Contractor’s and Vendor’s quality reports / deliverables, in line with the project quality requirements
In conjunction with the QA/QC delegation operating offshore, verify that the repair activities are in accordance with approved documented information (i.e. procedures, specifications, detailed methodologies, etc)
Support the underwater inspection (UWI) activities during the offshore / subsea repairs, by means of the development of job records, preparation of daily reports, review of diver commentary and transfer into the written form, interpretate ROV camera footage and transfer into the written form and be able to produce an oral commentary of the daily activities, as and when required
Monitor the technical inspections, verification, certification and acceptance by Specialist Third Party Inspection (TPI) Contractor, as applicable, and develop the final documentation for each offshore campaign (i.e., PL-49, PL-75, PL-610 and PL-811)

Fulltime

Civil Engineer

Our Mission & Ambition are Shaping a World of Trust. A business to business to S...

Location

Vietnam , Da Nang; Central

Salary:

Not provided

Bureau Veritas Certification CZ, s.r.o.

Expiration Date

Until further notice

Requirements

Civil construction or structure background, university degree or equivalent
3+ years of experience working as a Field Inspector
Knowledge in one of the fields (construction, mechanical, structural/civil, electrical and architectural) is preferred
Knowledge of materials testing
Successful completion of related internal safety certifications
Good command in office software (Outlook, Word, Excel, PowerPoint, …)
Fluent in reading, writing & speaking English is preferred
Can work independently under pressure
Can arrange to travel for inspection jobs
Strong leadership skills – able to lead and manage a team

Job Responsibility

Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g. soils, aggregates, concrete, asphalt, and steel)
Carry out General and Principal Inspections for trunk road bridges (comprising steel, concrete and masonry), retaining walls and high mast lights
Perform inspection on projects requiring expertise and knowledge in multiple areas of construction inspection
Read and interpret blueprints and construction specifications
To perform assessments and provide advice for service delivery within agreed parameters that include budget constraints and contractual requirements
Conduct activities in line with internal procedures, accreditation schemes, legislation and industry standards
To give technical guidance to other employees, as appropriate, and disseminate information to achieve effective knowledge transfer and application
Provides clear documentation of findings and results
Follow up on resolution of non-compliance reports (NCR’s)
May assist Project Manager in development of scope for testing and inspection services

Quality Engineer, Airworthiness Compliance

WE’RE LOOKING FOR A QUALITY ENGINEER, AIRWORTHINESS COMPLIANCE. Ensure complianc...

Location

Canada , Fort Erie

Salary:

Not provided

Airbus

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Aerospace, Aviation, Engineering or equivalent related field experience
TCCA Aircraft Maintenance Engineer License (AME)
10 years related Quality inspection on Aircraft components and systems
In lieu of degree, 15 years combined experience in a Quality Assurance capacity and/or as a certificated aviation maintenance technician (AMT) and/or (AME)
Airbus H125, H130, H135 Type Rated Training
Ability to interpret technical and regulatory documentation
Ability to effectively communicate verbally and in writing with all levels of personnel
Familiar with inspection tools, aids and devices used in determining tolerances and specification limits
Have the experience and flexibility to work in multiple areas
Must have the ability to interface with the external customer in regards to aircraft and aircraft records presentation at delivery

Job Responsibility

Ensure compliance with Transport Canada Civil Aviation (TCCA) CAR 571 and 573 regulations for Aircraft airworthiness, return to service after maintenance, repair or alterations
Support quality inspectors in the daily activities related to maintenance, coordination of Aircraft & Engine Calendar and/or hourly inspections, repairs, alterations and conformity inspections of aircraft parts, paint and related Backshop, Maintenance Repair and Overhaul (MRO) activities
Act as a quality interface between internal and external customers for nonconformance resolutions and customer aircraft delivery activities
Airworthiness Compliance: Responsible for representing the Certified Repair Station (CRS) or Transport Canada Civil Aviation Approved Maintenance Organization (AMO) for U.S aeronautical products maintained under Bilateral agreement between Canada and United States for the approval of Aircraft, Airframe, Aircraft engine(s), propellers/rotors, appliances or component parts for return to service (RTS) after undergoing inspection, maintenance, preventive maintenance, rebuilding or alterations and for making an entry in the applicable maintenance records with content, form and disposition acceptable to TCCA administrator and Airbus company RTS procedures
Compile comprehensive list of airworthiness directives, alert service bulletins and optional service bulletins, document preservation, maintenance or inspections of Aircraft, Engine(s), Dynamic components, Main or Tail rotor blades, component changes as applicable in respective component log cards for final conformity of Aircraft
Issue TCCA Form Ones, conformity inspection records, airworthiness approvals of new products and articles, return to service of inspected products and articles, that conform to the approved type design requirements and are in a condition for safe operation using procedures
Validation of inspection and/or compliance of life limited, cycle limited components, airworthiness directives, Emergency alert and alert service bulletins for applicable airframe, engine(s) and component calendar and/or hourly technical inspections per applicable manufactures recommended, TCCA/ AMM/ICA approved continuous airworthiness inspection programs
Ensure the state of preservation for Airframe and Engine(s) are reviewed for proper application and current with applicable intervals and carry on calendar maintenance intervals
Validation of testing of emergency locator transmitters (ELT), Transponders, Altimeters, Airspeed Indicators, Air Data Computers, aircraft static pressure systems and automatic pressure altitude reporting systems in accordance with applicable TCCA regulations
Witness functional/operational tests, check-outs, and adjustments of aircraft radios and navigational instruments

Fulltime

New

Metal inspector

Great opportunity in Surrey BC, we are currently looking for a Ground Inspector/...

Location

Canada , Surrey

Salary:

23.00 CAD / Hour

Randstad

Expiration Date

May 01, 2026

Requirements

A strong work ethic with the ability to focus and complete tasks independently
Comfortable performing physically demanding work in varying weather conditions
Excellent attention to detail with a commitment to safety and quality
Ability to communicate effectively with team members and customers
You can meet the schedule and shift time: Monday to Saturday
High School diploma, GED Certification, or equivalent experience in a similar role preferred
Min of 1+ years of experience working in a yard or automotive garage environment
Mechanically inclined/experience using hand/power tools
Attention to detail and ability to follow instructions
You are comfortable working in a covered outdoor environment in all types of weather

Job Responsibility

Report problems and communicate throughout the facility via radio
General yard clean up and repairs
Greet customers
Inspect customer loads and directing them to the proper location in the yard to unload
Basic sorting of scrap material and quality inspection
Grading of material and deductions
Doing basic quality assurance of materials
Accurately recording of production data
Climbing up truck ladders to inspect load
Participating in safety, quality and environmental inspections

What we offer

Pay Rate: $23/H
Located in Surrey (Close to Scott Road Station)
Weekly Pay (Direct Deposits)
Minimum 40 hours a week and opportunities for overtime
4% Vacation Pay added to every pay
Extensive training
Opportunities for growth
Team working environment
Free Parking on site

Fulltime

Quality Assurance Steel Inspector

Kiwi Constructors Ltd.

Location:
Canada , Guelph

Category:
Quality Control

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
December 09, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Quality Assurance Steel Inspector

Quality Control Supervisor

Nde inspector, certified welding inspector (cwi)

Specialist - Logistics Quality

Certified Welding Inspector

Senior Subsea Pipeline Marine Inspector

Civil Engineer

Quality Engineer, Airworthiness Compliance

Metal inspector

Quality Assurance Steel Inspector

Kiwi Constructors Ltd.

Location:Canada , Guelph

Category:Quality Control

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:December 09, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Quality Assurance Steel Inspector

Quality Control Supervisor

Nde inspector, certified welding inspector (cwi)

Specialist - Logistics Quality

Certified Welding Inspector

Senior Subsea Pipeline Marine Inspector

Civil Engineer

Quality Engineer, Airworthiness Compliance

Metal inspector

Location:
Canada , Guelph

Category:
Quality Control

Contract Type:
Not provided

Job Posted:
December 09, 2025