Qc Inspector Job at CommScope (Santa Ana)

Qc Inspector

This position is accountable to ensure quality standards for manufacturing proce...

Location

United States , Pineville

Salary:

Not provided

CommScope

Expiration Date

Until further notice

Requirements

Work experience in reliability testing and measurement or other technical functions like repair, system engineering or verification
Experience with measurement equipment and testing of software and hardware
English/Spanish highly desirable
Technical/practical knowledge of fiber and copper cable highly desirable

Job Responsibility

Collaborate with quality assurance engineer for defining the quality plans
Perform reliability and qualification testing for prototypes, new products, and production build
Collaborate with quality/manufacturing engineers for test data analysis
Document test results and processes using defined test reports
Assist in evaluating existing equipment improvements and new process equipment specifications
Communicate with manufacturing supervisors to review production problem areas, special projects, and other items needing attention and follow-up
Creating worksheet logs for production use to provide data (i.e. KPI): polisher log, connector log, i.e.
Assist the Engineering department with Quality Assurance
This position is responsible for promoting safety and quality in the production floor

Qc Inspector

To validate that the work of all engineers is performed to the required standard...

Location

United Kingdom , Dartford

Salary:

38000.00 - 42000.00 GBP / Year

Sureserve

Expiration Date

Until further notice

Requirements

To validate that the work of all engineers is performed to the required standards, as set out by Gas Safety Regulations and Sureserve Compliance
To identify any gaps in an engineer's knowledge and provide feedback to line managers where additional training is required
Serious complaint jobs may need to be visited. A clear record of events must be documented, including issues such as poor workmanship, gas safety concerns, and CO risks
Following visits, photographic evidence must be uploaded via PDA, along with full reports and recommendations
A QC Inspector will ensure sufficient quality checks (QCs) are carried out across the area throughout the year to meet client needs and demonstrate that standards are being achieved
To ensure engineers comply with all health and safety requirements. All issued equipment must be fit for purpose and free from defects, including PPE, Vehicles, Ladders
Regular HSE checks must be conducted with each engineer within the geographical contract area
To confidently engage with client representatives and communicate relevant information through the correct channels
To understand servicing, breakdowns, and installation work (where required), and identify ways to improve engineers' working practices
To recognise that honest reporting is essential for the development of engineers, the team, and the company

Job Responsibility

To validate that the work of all engineers is performed to the required standards, as set out by Gas Safety Regulations and Sureserve Compliance
To identify any gaps in an engineer's knowledge and provide feedback to line managers where additional training is required
Serious complaint jobs may need to be visited
Following visits, photographic evidence must be uploaded via PDA, along with full reports and recommendations
To ensure sufficient quality checks are carried out
To ensure engineers comply with all health and safety requirements
Regular HSE checks must be conducted with each engineer
To confidently engage with client representatives
To understand servicing, breakdowns, and installation work
To recognise that honest reporting is essential

Fulltime

Qc inspector

In this position, you will support laboratory testing, batch verification, mater...

Location

Vietnam , Bac Ninh

Salary:

Not provided

PPG Industries

Expiration Date

Until further notice

Requirements

Minimum college certification in relevant discipline
Minimum 2 years of quality control experience in a manufacturing environment, preferably within the paint and coatings industry
Knowledge in chemicals, paint or coatings

Job Responsibility

Verify formular and component specifications on batch cards
Set up, adjusts, calibrates and operates laboratory equipment and instruments
Test samples of manufactured products to verify conformity to specifications
Record test results on batch cards, checklist and in our computer operating system
Manage quality records and retains of production batches
Evaluate retains of production batches in response to quality complaint
Conduct incoming material testing, ensuring conformance to required specifications
Perform routine testing during production and finished product to ensure finish product are filled and packaged according to specifications
Perform quality audit of laboratory and production work instruction to ensure compliance to Quality Policy

Fulltime

QC Inspector

The Quality Inspector will be responsible for performing and documenting inspect...

Location

United States , Boise

Salary:

Not provided

Apollo Mechanical Contractors

Expiration Date

Until further notice

Requirements

5 Years of Microelectronics experience
AWS CWI Certification Preferred
Experienced in ASME and AWS codes
Ability to communicate clearly and effectively
Proficient with learning and applying technical concepts
Willingness to learn and adapt quickly in a fast-paced environment
Communicate effectively on the phone and in person
Display diplomacy and tact in collaborating with a wide variety of colleagues, customers, and suppliers
Microsoft Office Suite (particularly Excel and Word)

Job Responsibility

Perform various inspections i.e. Welding, Dimensional, Visual, etc
Generate all required inspection reports
Coordinate quality inspections with all the site sub-contractors and vendors
Coordinate all nondestructive testing on site
Complete and coordinate the approval of the site QC technical submittals with the customer
Coordinate with the customers representative on all quality matters
Performing receiving inspection of equipment and material

What we offer

Medical, Dental, and Vision (employer pays 86% of benefit cost)
EAP Plan
401K with Company Match and profit share (total match of up to 7.5%)
STD, LTD, & Voluntary Life benefits offered
Paid Time off
Paid Holidays
Yearly company sponsored family events

Qc inspector

QC Inspector role for a Medical Device Company.

Location

United States , Tempe

Salary:

15.00 - 18.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

One to two (1-2) years related Quality Control experience or equivalency
Six (6) months related experience in a manufacturing environment preferred
Demonstrated human relation and communications skills
Ability to withstand repetitive motion and to lift up to 50 lbs
Must be able to read and comprehend English
High school diploma or GED
Able to sit or stand for long periods
attention to detail
perform repetitive tasks

Job Responsibility

Performs visual, dimensional and functional inspections on a wide variety of products in accordance with internal procedures and Product Specifications
Reports non-conformances to Supervisor and discusses corrective action
Follows-up to see if corrective action was effective
Determines whether product is acceptable or rejected, initiates rejection notices, and maintains accurate written records of the inspections performed, including the results
Recognizes conditions outside their specific areas of inspection which require action and refers the items to the supervisor
Monitors compliance to G.M.P. in employee working areas and reports infractions to Q.C. Supervisor for corrective action
Employee evaluates both the product and process, making decisions on subjective visual inspections
Responsibilities have an impact on product quality, productivity, and product costs as affected by internal and external costs of rework, scrap and product warranty

Fulltime

Qc inspector

Inspects and audits the processes and product to ensure they conform to the comp...

Location

United States , Bossier City

Salary:

Not provided

Cactus Wellhead LLC

Expiration Date

Until further notice

Requirements

High School diploma or general education degree (GED)
Minimum of 2 years related experience and/or training
or equivalent combination of education and experience
Experience with Precision Measuring Tools performing Geometric Dimension & Tolerance inspection of machined parts to detailed blueprints
Working knowledge of Quality Systems, Mechanical, Electronic and Hydraulic experience
Proficient in dimensional inspection of wellhead and valve components
Must understand, use and properly apply dimensional inspection equipment such as tape measures, scales, OD and ID micrometers, calipers, depth gages, thread inspection equipment of all types
Ability to read and interpret wellhead and valve component engineering drawings
Basic Computer Skills
Basic Language Skills

Job Responsibility

Practice safe work habits and comply with all quality, safety, health and environmental policies, procedures, programs and regulations
Visual and dimensional inspection of wellhead and valve components to ensure conformance to Engineering drawings and specifications
Perform in-process inspection for setout/staged equipment
Performing Final Inspection of all outgoing equipment
Completes quality documentation accurately and legibly
Verification of job packages for complete signoffs
Measure dimensions using precision instruments
Hardness test parts
Reports time against jobs
Processing Nonconformance Reports (NCR) at location

Fulltime

Welding QC Inspector

Explore this job opportunity as a Welding QC Inspector for a Multipurpose DP3 ve...

Location

Romania

Salary:

Not provided

OSM Ship Management Pte. Ltd.

Expiration Date

Until further notice

Requirements

Certified Welding CSWIP 3.1
Minimum of 3 years of offshore pipeline experience or hook-up
At least 5 years of experience in the Oil & Gas industry
Fluent in English
Willingness to work internationally and travel frequently
Strong knowledge of coating application procedures, inspection techniques, and international standards
Ability to work independently with strong attention to detail and commitment to safety and quality

Job Responsibility

Perform inspections and monitor all welding activities to ensure compliance with project specifications, codes, and standards (such as ASME, AWS, ISO)
Review and verify welding procedures, welder qualifications, and material certifications
Conduct visual inspections of welds, as well as non-destructive testing (NDT) surveillance, and ensure weld quality and workmanship meet acceptance criteria
Monitor pre-welding, welding, and post-welding operations including fit-up, alignment, heat input, interpass temperature, and post-weld heat treatment
Identify and report non-conformities and assist in the development of corrective action plans
Maintain accurate and detailed inspection records, welding logs, and reports
Coordinate with the construction team, welding supervisors, and subcontractors to resolve technical issues related to welding
Ensure that welding equipment is properly maintained and calibrated
Participate in internal and external audits related to welding quality
Ensure that all safety practices are strictly followed during welding operations

What we offer

Insurance: Provided by the company

Fulltime

Site PVV - Welding QC Inspector

We are looking for a Site PVV - Welding QC Inspector with the following details:...

Location

Iraq , Basra

Salary:

Not provided

Lobellia

Expiration Date

Until further notice

Requirements

Minimum 10 years of experience in Welding QC on major Oil & Gas EPC projects
Strong experience with piping, pressure vessels, and valves welding
Experience on CPF, refinery, or large industrial facilities strongly preferred
Solid knowledge of welding processes, metallurgy, and fabrication techniques
Strong understanding of ASME IX, ASME B31.3, API standards
Ability to interpret isometrics, welding drawings, WPS/PQR/WPQ documentation
Knowledge of weld repair techniques and metallurgical constraints
Understanding of NCR, deviation, and concession processes
Familiarity with digital QC systems (Aconex, SharePoint, SmartPlant, etc.) is a plus

Job Responsibility

Monitor and record all welding activities on a daily basis
Conduct routine inspections in fabrication areas, pipe racks, vessel installation zones, and field welding locations
Verify that welding activities follow approved procedures and are performed by qualified welders
Verify the contractor’s daily welding reports and associated databases
Review weekly trends of weld acceptance/rejection
Provide daily updates and weekly reporting directly to the CPF2 Site QC Superintendent
Contribute actively to daily/weekly QC coordination meetings
Maintain up-to-date records, ITP follow-up, NCR/CAR tracking, and Mechanical Completion documentation
Verify material identification, traceability, joint preparation, bevels, fit-up, alignment, and cleanliness before welding
Ensure compliance with approved WPS, PQR, and welder qualifications (WPQ)

Fulltime

Select Country

Qc Inspector

Job Responsibility

Requirements

Looking for more opportunities?

Qc Inspector

Qc Inspector

Qc Inspector

Qc inspector

QC Inspector

Qc inspector

Qc inspector

Welding QC Inspector

Site PVV - Welding QC Inspector

Our AI answers in your language