CrawlJobs Logo

QC Inspector

United Arab Emirates, Al Ruwais · Job Posted December 10, 2025
Apply Position
Job Link Share

Job Description

Site Inspector ensures the implementation of all the quality procedures and standards in the Site. They are responsible for performing inspections on subcontractor’s activities assuring the conformity to site inspection plans and applicable engineering. They report to the construction manager.

Job Responsibility

  • To ensure the implementation of all the Quality/HSE procedures and standards for the areas or activities (subcontractors) of responsibilities
  • To support the Construction Material Controller in checking the Supplier’s material prior to the start of works
  • To address Subcontractor activities for his/her own discipline, ensuring that Plant Construction works are performed according to the applicable engineering specification, site procedures and Site Inspection Plan according to Quality & Safety procedures, as well as according to the terms and conditions of the subcontract
  • To check that the manpower employed by the Subcontractor continuously respect the requirements of applicable procedures and the Quality level fixed by the same
  • To check that the equipment employed by the Subcontractor are adequate and calibrated as required according to applicable procedures and to the Quality level fixed by the same
  • To check that the works performed by the Subcontractor conform to the applicable documents, Safety regulations, and to the Quality level fixed by the same, in coordination with the other members of Quality/HSE teams
  • To inform the Site Engineer to make the necessary changes when detects any design errors
  • To promote the non-conformity draft and informs the Construction Manager, supporting them in the nonconformity resolution
  • Keeping the Construction Manager informed, receive the Request of Inspection from Subcontractors and confirm to proceed with the inspection informing the Client, assume the responsibility in case of Client’s (motivated) rejection of the inspection taking care of remedial action and avoiding the repetition of similar case in future

Requirements

  • University Degree or Diploma in relevant discipline or equivalent
  • Significant experience in the industrial construction of large or XL gas plants
  • Covered a similar role in at least 2-3 projects of comparable size
  • A minimum of 12 years of relevant experience
  • Excellent communications and interpersonal skills
  • Attention to detail, management skills
  • Team-oriented skills, self-motivation, and direction, with strong bias toward timely performance and problem resolution

What we offer

  • Single Status
  • Accommodation provided by the company
  • Transportation provided by the company
  • Round trip ticket on each rotation (Economy class)

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Similar Jobs for

QC Inspector

8 matching positions

Qc Inspector

Location
Location
United States , Santa Ana
Salary
Salary:
Not provided
commscope.com Logo
CommScope
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Work experience in reliability testing and measurement or other technical functions like repair, system engineering or verification
  • Experience with measurement equipment and testing of software and hardware
  • English/Spanish highly desirable
  • Technical/practical knowledge of fiber and copper cable highly desirable
Job Responsibility
Job Responsibility
  • Collaborate with quality assurance engineer for defining the quality plans
  • Perform reliability and qualification testing for prototypes, new products, and production build
  • Collaborate with quality/manufacturing engineers for test data analysis
  • Document test results and processes using defined test reports
  • Assist in evaluating existing equipment improvements and new process equipment specifications
  • Communicate with manufacturing supervisors to review production problem areas, special projects, and other items needing attention and follow-up
  • Creating worksheet logs for production use to provide data (i.e. KPI): polisher log, connector log, i.e.
  • Assist the Engineering department with Quality Assurance
  • This position is responsible for promoting safety and quality in the production floor
  • Fulltime
Read More
Arrow Right

Qc Inspector

This position is accountable to ensure quality standards for manufacturing proce...
Location
Location
United States , Pineville
Salary
Salary:
Not provided
commscope.com Logo
CommScope
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Work experience in reliability testing and measurement or other technical functions like repair, system engineering or verification
  • Experience with measurement equipment and testing of software and hardware
  • English/Spanish highly desirable
  • Technical/practical knowledge of fiber and copper cable highly desirable
Job Responsibility
Job Responsibility
  • Collaborate with quality assurance engineer for defining the quality plans
  • Perform reliability and qualification testing for prototypes, new products, and production build
  • Collaborate with quality/manufacturing engineers for test data analysis
  • Document test results and processes using defined test reports
  • Assist in evaluating existing equipment improvements and new process equipment specifications
  • Communicate with manufacturing supervisors to review production problem areas, special projects, and other items needing attention and follow-up
  • Creating worksheet logs for production use to provide data (i.e. KPI): polisher log, connector log, i.e.
  • Assist the Engineering department with Quality Assurance
  • This position is responsible for promoting safety and quality in the production floor
Read More
Arrow Right

Qc Inspector

To validate that the work of all engineers is performed to the required standard...
Location
Location
United Kingdom , Dartford
Salary
Salary:
38000.00 - 42000.00 GBP / Year
sureserve.co.uk Logo
Sureserve
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • To validate that the work of all engineers is performed to the required standards, as set out by Gas Safety Regulations and Sureserve Compliance
  • To identify any gaps in an engineer's knowledge and provide feedback to line managers where additional training is required
  • Serious complaint jobs may need to be visited. A clear record of events must be documented, including issues such as poor workmanship, gas safety concerns, and CO risks
  • Following visits, photographic evidence must be uploaded via PDA, along with full reports and recommendations
  • A QC Inspector will ensure sufficient quality checks (QCs) are carried out across the area throughout the year to meet client needs and demonstrate that standards are being achieved
  • To ensure engineers comply with all health and safety requirements. All issued equipment must be fit for purpose and free from defects, including PPE, Vehicles, Ladders
  • Regular HSE checks must be conducted with each engineer within the geographical contract area
  • To confidently engage with client representatives and communicate relevant information through the correct channels
  • To understand servicing, breakdowns, and installation work (where required), and identify ways to improve engineers' working practices
  • To recognise that honest reporting is essential for the development of engineers, the team, and the company
Job Responsibility
Job Responsibility
  • To validate that the work of all engineers is performed to the required standards, as set out by Gas Safety Regulations and Sureserve Compliance
  • To identify any gaps in an engineer's knowledge and provide feedback to line managers where additional training is required
  • Serious complaint jobs may need to be visited
  • Following visits, photographic evidence must be uploaded via PDA, along with full reports and recommendations
  • To ensure sufficient quality checks are carried out
  • To ensure engineers comply with all health and safety requirements
  • Regular HSE checks must be conducted with each engineer
  • To confidently engage with client representatives
  • To understand servicing, breakdowns, and installation work
  • To recognise that honest reporting is essential
  • Fulltime
Read More
Arrow Right

Qc inspector

In this position, you will support laboratory testing, batch verification, mater...
Location
Location
Vietnam , Bac Ninh
Salary
Salary:
Not provided
ppg.com Logo
PPG Industries
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Minimum college certification in relevant discipline
  • Minimum 2 years of quality control experience in a manufacturing environment, preferably within the paint and coatings industry
  • Knowledge in chemicals, paint or coatings
Job Responsibility
Job Responsibility
  • Verify formular and component specifications on batch cards
  • Set up, adjusts, calibrates and operates laboratory equipment and instruments
  • Test samples of manufactured products to verify conformity to specifications
  • Record test results on batch cards, checklist and in our computer operating system
  • Manage quality records and retains of production batches
  • Evaluate retains of production batches in response to quality complaint
  • Conduct incoming material testing, ensuring conformance to required specifications
  • Perform routine testing during production and finished product to ensure finish product are filled and packaged according to specifications
  • Perform quality audit of laboratory and production work instruction to ensure compliance to Quality Policy
  • Fulltime
Read More
Arrow Right

QC Inspector

The Quality Inspector will be responsible for performing and documenting inspect...
Location
Location
United States , Boise
Salary
Salary:
Not provided
apollomech.com Logo
Apollo Mechanical Contractors
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 5 Years of Microelectronics experience
  • AWS CWI Certification Preferred
  • Experienced in ASME and AWS codes
  • Ability to communicate clearly and effectively
  • Proficient with learning and applying technical concepts
  • Willingness to learn and adapt quickly in a fast-paced environment
  • Communicate effectively on the phone and in person
  • Display diplomacy and tact in collaborating with a wide variety of colleagues, customers, and suppliers
  • Microsoft Office Suite (particularly Excel and Word)
Job Responsibility
Job Responsibility
  • Perform various inspections i.e. Welding, Dimensional, Visual, etc
  • Generate all required inspection reports
  • Coordinate quality inspections with all the site sub-contractors and vendors
  • Coordinate all nondestructive testing on site
  • Complete and coordinate the approval of the site QC technical submittals with the customer
  • Coordinate with the customers representative on all quality matters
  • Performing receiving inspection of equipment and material
What we offer
What we offer
  • Medical, Dental, and Vision (employer pays 86% of benefit cost)
  • EAP Plan
  • 401K with Company Match and profit share (total match of up to 7.5%)
  • STD, LTD, & Voluntary Life benefits offered
  • Paid Time off
  • Paid Holidays
  • Yearly company sponsored family events
Read More
Arrow Right

Qc inspector

Canadian Plains is looking for a Level 1 or 2 QC Inspector to join our team in L...
Location
Location
Canada , Lloydminster
Salary
Salary:
Not provided
cpenergy.ca Logo
Canadian Plains Energy Services
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Level 1 or 2 CWB certification required
  • Relevant technical diploma and/or trade certificate
  • Must have advanced skills in Excel, Bluebeam, and SpoolFab
  • Must have the ability to pass a drug & alcohol test
  • Strong client relations skills
  • Exemplary professional verbal and written communication skills
  • Meticulous record-keeping skills
  • Excellent organizational and time management skills
  • Capable of working independently with minimal direction
Job Responsibility
Job Responsibility
  • Ensure the implementation of QC requirements at the job site
  • Perform pre-inspection to ensure that all installed materials are in conformance with the applicable standards, drawings and specifications
  • Conduct interim and final inspections with owner’s representative per inspection and testing procedures (I&TP.)
  • Create Hydrotest packages and witness all testing activities
  • Review Radiographic film
  • Continually monitor work in-progress to ensure compliance with QC and other project requirements
  • Act as an accessible resource on QC issues
  • Coordinate Quality team member activities in conjunction with construction activities
  • Prepare required documentation and maintain files for final turnover to the client
  • Fulltime
Read More
Arrow Right

Qc inspector

QC Inspector role for a Medical Device Company.
Location
Location
United States , Tempe
Salary
Salary:
15.00 - 18.00 USD / Hour
gomillenniumsoft.com Logo
MillenniumSoft Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • One to two (1-2) years related Quality Control experience or equivalency
  • Six (6) months related experience in a manufacturing environment preferred
  • Demonstrated human relation and communications skills
  • Ability to withstand repetitive motion and to lift up to 50 lbs
  • Must be able to read and comprehend English
  • High school diploma or GED
  • Able to sit or stand for long periods
  • attention to detail
  • perform repetitive tasks
Job Responsibility
Job Responsibility
  • Performs visual, dimensional and functional inspections on a wide variety of products in accordance with internal procedures and Product Specifications
  • Reports non-conformances to Supervisor and discusses corrective action
  • Follows-up to see if corrective action was effective
  • Determines whether product is acceptable or rejected, initiates rejection notices, and maintains accurate written records of the inspections performed, including the results
  • Recognizes conditions outside their specific areas of inspection which require action and refers the items to the supervisor
  • Monitors compliance to G.M.P. in employee working areas and reports infractions to Q.C. Supervisor for corrective action
  • Employee evaluates both the product and process, making decisions on subjective visual inspections
  • Responsibilities have an impact on product quality, productivity, and product costs as affected by internal and external costs of rework, scrap and product warranty
  • Fulltime
Read More
Arrow Right

Qc inspector

Inspects and audits the processes and product to ensure they conform to the comp...
Location
Location
United States , Bossier City
Salary
Salary:
Not provided
cactuswhd.com Logo
Cactus Wellhead LLC
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School diploma or general education degree (GED)
  • Minimum of 2 years related experience and/or training
  • or equivalent combination of education and experience
  • Experience with Precision Measuring Tools performing Geometric Dimension & Tolerance inspection of machined parts to detailed blueprints
  • Working knowledge of Quality Systems, Mechanical, Electronic and Hydraulic experience
  • Proficient in dimensional inspection of wellhead and valve components
  • Must understand, use and properly apply dimensional inspection equipment such as tape measures, scales, OD and ID micrometers, calipers, depth gages, thread inspection equipment of all types
  • Ability to read and interpret wellhead and valve component engineering drawings
  • Basic Computer Skills
  • Basic Language Skills
Job Responsibility
Job Responsibility
  • Practice safe work habits and comply with all quality, safety, health and environmental policies, procedures, programs and regulations
  • Visual and dimensional inspection of wellhead and valve components to ensure conformance to Engineering drawings and specifications
  • Perform in-process inspection for setout/staged equipment
  • Performing Final Inspection of all outgoing equipment
  • Completes quality documentation accurately and legibly
  • Verification of job packages for complete signoffs
  • Measure dimensions using precision instruments
  • Hardness test parts
  • Reports time against jobs
  • Processing Nonconformance Reports (NCR) at location
  • Fulltime
Read More
Arrow Right