CrawlJobs Logo
Bureau Veritas Certification CZ, s.r.o. Logo Bureau Veritas Certification CZ, s.r.o. · Quality Control

Qa/qc Manager I

United States, Mclean · Job Posted May 16, 2026
Apply Position
Job Link Share

Job Description

Responsible for providing engineering and technical support to plan, schedule, coordinate, and execute full life cycle commissioning of critical facilities, whilst under direct supervision. This position is also responsible for participating in the MEP design process, witnessing and/or performing the static and dynamic testing of mechanical, electrical, and controls systems, and for operating the system in normal, maintenance, and failure modes of operations by performing the following duties.

Job Responsibility

  • Assists in the development of commissioning plans
  • Assists in engineering design reviews
  • Interprets design and specification under direct supervision
  • Works in conjunction with senior engineers to fully understand scope and design as well as resolve issues, when necessary
  • Reviews shop drawings and submittals under direct supervision
  • Develops MEP test procedures under direct supervision
  • Develops MEP operating procedures under direct supervision
  • Provides input in the development of site specific load bank plans
  • Provides input in the development of commissioning schedules
  • Witnesses and/or performs the static and dynamic testing of MEP Systems, whilst under direct supervision, with examples that include chiller plants, air handling equipment, pumps, UPS systems, switchgear, and ATS switches
  • Conducts site observation surveys and prepares field reports on the status of projects and completion of projects with respect to compliance to the plans and specifications, whilst under direct supervision
  • Prepares daily reports, issue logs, and identifies corrective measures for on-site problems affecting commissioning, whilst under supervision
  • Familiarizes oneself with site specific requirements, as well as the latest equipment and functional concepts
  • Follows and obeys all project specific safety requirements, specific on-site regulations, and company specific safety requirements and protocols
  • Performs routine calculations
  • Seeks to obtain and maintain accreditations pertinent to position
  • Assists the project manager in the reasonable execution of project tasks
  • Receives instruction from senior engineers and ensures proper execution of assigned tasks
  • Participates in professional trade associations and societies
  • Performs various administrative duties
  • Performs other duties as assigned

Requirements

  • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
  • Ability to write routine reports and correspondence
  • Ability to speak effectively before groups of customers or employees of organization
  • Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume
  • Ability to apply concepts of basic algebra and geometry
  • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form
  • Ability to deal with problems involving several concrete variables in standardized situations
  • Knowledge of Deltek and Microsoft Office 365
  • Pertinent and/or relevant industry experience
  • and/or one to two years related experience and/or training
  • or equivalent combination of education and experience
  • Valid Driver's License
  • CPR and/or basic First Aid
  • OSHA 10
  • NFPA70E
  • Strong technical writing
  • Communication skills, both oral and written
  • Time management skills
Bureau Veritas Certification CZ, s.r.o. - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Qa/qc Manager I

8 matching positions

Quality (QA/QC) Manager

Location
Location
Salary
Salary:
Not provided
https://www.mota-engil.com/ Logo
Mota Engil
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Engineering
  • Complementary training in Quality Management
  • 5 to 10 years of professional experience in similar roles in construction/mining projects
  • Proficiency in ISO 9001, ISO 45001, and ISO 14001 standards and Audits
  • Proficiency in MS Office, SAP, and Collaborative Platforms (preferred)
  • Fluency in French and/or English (mandatory)
  • Effective communication skills
  • Leadership
  • Planning and organization
  • Teamwork
Job Responsibility
Job Responsibility
  • The QA/QC Manager shall be responsible for the overall management, implementation, and monitoring of the Project Quality Assurance and Quality Control systems to ensure compliance with the Contract requirements, specifications, standards, and approved procedures
  • The QA/QC Manager shall develop, implement, maintain, and verify the effectiveness of the Project Quality Assurance Plan and all associated quality management procedures and controls
  • The QA/QC Manager shall advise Project management on quality-related matters, including quality performance, deficiencies, compliance issues, corrective actions, and improvement measures
  • The QA/QC Manager shall supervise and coordinate all quality assurance and quality control personnel assigned to the Project and shall ensure that such personnel are suitably qualified and competent
  • The QA/QC Manager shall interface with suppliers, subcontractors, laboratories, and consultants on all quality-related matters to ensure compliance with Project requirements and approved specifications
  • The QA/QC Manager shall coordinate quality activities with engineering, procurement, construction, and other Project departments to ensure that quality objectives and requirements are achieved
  • The QA/QC Manager shall supervise and participate in inspections, audits, testing, monitoring, and verification activities to confirm compliance with the Project Quality Assurance Plan and applicable standards
  • The QA/QC Manager shall identify, record, and monitor quality deficiencies and non-conformances and shall recommend and follow up on the implementation of corrective and preventive actions
  • The QA/QC Manager shall represent the Project during quality audits and inspections conducted by management, the Employer, the Engineer, certification bodies, or governmental authorities
  • The QA/QC Manager shall maintain all quality records, reports, test results, and quality documentation necessary to demonstrate compliance with the Contract and applicable standards.
Read More
Arrow Right

Qa/qc Manager

Apollo Mechanical Contractors is seeking an experienced QA/QC Manager to lead pr...
Location
Location
United States , Los Alamos
Salary
Salary:
Not provided
apollomech.com Logo
Apollo Mechanical Contractors
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • AWS Certified Welding Inspector (CWI) required
  • additional certifications (NDE Level II/III, ASNT, API) preferred
  • Experience with ASME, AWS, and other applicable nuclear/high‑security codes and standards strongly preferred
  • Strong leadership skills with the ability to supervise QA/QC staff and influence cross‑functional teams
  • Excellent written and verbal communication skills
  • Ability to interpret and apply drawings, technical specifications, procedures, and regulatory requirements
  • Strong organizational and time‑management abilities
  • capable of managing multiple priorities
  • Demonstrated diplomacy, professionalism, and tact when collaborating with customers, inspectors, suppliers, and project teams
  • Proficiency in Microsoft Office Suite (especially Excel and Project)
Job Responsibility
Job Responsibility
  • Develop, implement, and manage the Project QA/QC Program in accordance with nuclear/high‑security requirements and company quality standards
  • Lead and supervise QA/QC inspectors, including task assignment, mentoring, and performance oversight
  • Plan, perform, and document a wide variety of inspections (dimensional, visual, weld, installation, equipment, piping, etc.)
  • Ensure subcontractors and vendors comply with project quality requirements
  • coordinate inspection activities across all project participants
  • Manage and oversee non‑destructive examination (NDE) activities including scheduling, documentation, and acceptance review
  • Review, submit, and track QC technical submittals, ensuring timely approval by customer representatives
  • Serve as primary liaison to the customer on all quality‑related matters
  • participate in quality meetings, audits, and assessments
  • Perform receiving inspections of materials and equipment to verify conformance with purchase orders and specifications
Read More
Arrow Right

Senior Construction Manager I

ICON is seeking a Senior Construction Manager I to lead field construction for r...
Location
Location
United States , Austin
Salary
Salary:
Not provided
iconbuild.com Logo
ICON
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 7+ years of field construction management experience (residential or community development)
  • Bachelor’s degree in Construction Management, Engineering, Architecture, or related field
  • Strong knowledge of construction methods, codes, and permitting
  • Proven history of on-time, on-budget project delivery
  • Proficiency in construction management software (Procore, Smartsheet, P6, etc.)
  • Excellent communication and team leadership skills
  • Willingness to travel across Texas as needed
Job Responsibility
Job Responsibility
  • Provide constructability input throughout design, from Schematic Design through Construction Documents
  • Advise design teams on materials, methods, and logistics to improve speed, cost, and safety
  • Coordinate with Estimating, Project Managers, Print Operations, and ICON leadership to align on schedule, logistics, and cost impacts on residential and commercial construction projects
  • Develop and manage the construction master schedule and integrate phasing, sequencing, and logistics
  • Lead the RFP process with the PM, including bid package development, scope definition, trade qualification, pre-bid meetings, bidder Q&A, leveling, and buyout recommendations
  • Prepare detailed site logistics plans including access, laydown, utilities, deliveries, equipment, and safety areas
  • Manage overall field execution, tracking schedule, cost, manpower, and performance
  • Oversee superintendents and trade partners
  • ensure consistent expectations for safety, quality, and production
  • Lead field QA/QC and safety programs
Read More
Arrow Right

Field Qa/qc Inspector - Electrical E&i

The project is planning the expansion of the existing Hamburg Refinery, by addin...
Location
Location
Germany , Hamburg
Salary
Salary:
Not provided
met-ts.co.uk Logo
Met T&S
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • University Degree or Diploma in relevant discipline or equivalent
  • Experience in the oil and gas industry
  • At least 5 years relevant experience in a similar role
  • Experience in Gas Plants and EPC Projects
  • Fluent English
  • Excellent IT and analytical skills
  • Excellent communications, team-oriented and interpersonal skills
  • Attention to details
  • Self-motivation and direction, with a strong bias toward timely performance and problem resolution
Job Responsibility
Job Responsibility
  • To ensure the implementation of all the Quality/HSE procedures and standards for the areas or activities (subcontractors) of responsibilities, together with the other members of Quality/HSE teams
  • To support the Construction Material Controller in checking the Supplier's material prior to the start of works
  • To address Subcontractor activities for his/her own discipline, ensuring that Plant Construction works are performed according to the applicable engineering specification, site procedures and Site Inspection Plan according to Quality & Safety procedures, as well as according to the terms and conditions of the subcontract
  • To check that the manpower employed by the Subcontractor continuously respect the requirements of applicable procedures and the Quality level fixed by the same
  • To check that the equipment employed by the Subcontractor are adequate and calibrated as required according to applicable procedures and to the Quality level fixed by the same
  • To check that the works performed by the Subcontractor conform to the applicable documents, Safety regulations, and to the Quality level fixed by the same, in coordination with the other members of Quality/HSE teams
  • To inform the Site Engineer to make the necessary changes when detects any design errors
  • To promote the non-conformity draft and informs the Construction Manager, supporting them in the nonconformity resolution
  • Keeping the Construction Manager informed, receive the Request of Inspection from Subcontractors and confirm to proceed with the inspection informing the Client, assume the responsibility in case of Client's (motivated) rejection of the inspection taking care of remedial action and avoiding the repetition of similar case in future
  • Fulltime
Read More
Arrow Right

QA/QC, IMS and Customer Interface Manager

Explore a world of opportunities with us. Look ahead with us and help shape inno...
Location
Location
Thailand , Saraburi
Salary
Salary:
Not provided
evonik.com Logo
Evonik Industries
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree / Master’s degree in chemistry or chemical engineering
  • 15-20 years working experience in chemical/pharma/FMCG industries as Quality Control Manager
  • Strong communication, collaboration, and networking abilities
  • Fluency in English, both written and spoken
  • Proficiency in Microsoft tools, Minitab, Six Sigma., etc.
  • Analytical and problem-solving skills
  • Ability to work effectively in a global, multicultural environment
Job Responsibility
Job Responsibility
  • Building safety awareness & observing safety adherence in all operations of QA/QC to ensure zero incidence by regular safety talks & safety rounds with team members
  • Reviewing and controlling raw materials’ quality compliance to ensure the right raw material input into the production process
  • Raw material new vendor development to reduce dependability on single supplier by assessing new vendor’s specification & process capabilities, sample analysis, trials at lab/plant
  • Reviewing and controlling FG quality in compliance to ensure the right product is produced as per customers’ requirements by evaluating FG quality, its consistency & process capabilities
  • Planning, executing all improvement activities for product development, quality improvement of all grades of H2O2 & PAA by conducting lab trials & coordinating with plant team for plant modifications, plan trials & ending with commercial production
  • Train & guide team for SPC analysis, identifying improvement opportunities & implementation
  • Identify areas for improvement and develop strategies to achieve quality KPIs
  • Collaborate with cross-functional teams, suppliers and internal & external stakeholders to address quality issues and drive continuous improvement initiatives
  • Product specific regulatory approvals as per customer need and application
  • Evaluate the annual performance of direct reports, identify gaps/OFIs for individuals help them overcome and develop people. Drive quality culture and develop people
What we offer
What we offer
  • hybrid and flexible working environments with #SmartWork
  • performance-based remuneration
  • occupational health benefits
  • attractive career paths
  • high-quality development programs
  • Fulltime
Read More
Arrow Right
New

Associate II, Quality (7pm-7am)

This is where you make a difference in our patients’ safety. As a member of the ...
Location
Location
United States , Marion
Salary
Salary:
88000.00 - 121000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma, GED, or equivalent required. Must be at least 18 years of age
  • BS in engineering/science or equivalent work experience
  • 3-5 years exp. in Quality with a medical device/Pharma company or other similarly regulated industry
  • Strong interpersonal skills and great attention to detail are necessary
  • Must be a strong team player with good problem solving, and good verbal and written communication skills
  • Must have the ability to manage people, encourage teamwork and drive decisions
  • Must be able to handle multiple projects concurrently, have computer experience and have knowledge of FDA Regulations, Application of Good Laboratory Practices, and Application of Good Manufacturing Practices
  • Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
  • Must have basic English written and oral communication skills adequate to communicate with other team members
Job Responsibility
Job Responsibility
  • Leads ongoing, daily departmental operations
  • May include the supervision of assigned personnel in achieving defined quality goals in an efficient, accurate and timely manner
  • Interview/hire, evaluate, train and develop direct reports
  • Perform in-depth internal assessments and evaluations by collecting and analyzing accurate, objective evidence regarding risks and their magnitude
  • Work closely with production supervisors, quality, engineering and other internal groups to accomplish the above and influence necessary actions
  • Determine the logic, adequacy and effectiveness of processes, systems and related requirements
  • Develop plans to correct identified risks including areas of non-conformance. Inform management and implement approved corrective action plans
  • Serve as Subject Matter Expert (SME) by maintaining a high level of expertise in current regulatory requirements. Provide training and coaching to local employees and others as needed on relevant area(s)
  • Write, review, analyze and revise written Standard Operating Procedures (SOPs) and submit procedural changes as needed to meet Corporate, Divisional, Plant, Regulatory Requirements, etc
  • Participate in external assessments and audits by evaluating and solving product/process problems by providing technical, analytical and supervisory skills Support process with timely closure of observations/audit items
What we offer
What we offer
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Support for Parents
  • Continuing Education/ Professional Development
  • Employee Heath & Well-Being Benefits
  • Paid Time Off
  • Fulltime
Read More
Arrow Right
New

Project Manager

Position is responsible for management, or assisting management, of all phases o...
Location
Location
United States , Raleigh
Salary
Salary:
70.00 - 72.00 USD / Hour
lorienglobal.com Logo
Lorien
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Provide leadership, oversight management, delegation and coordination to the various internal and external organizations that are providing services to the project (engineering, project controls, estimating, construction management, supply chain, legal, Environmental Health and Safety, QA/QC, operations, communications, regulatory, security, fuels, transmission, etc.)
  • Structure, lead, and/or assist in leading all project related meetings and reports required to ensure open communication between all team members, key stakeholders, and management (monthly project reviews, kickoff meetings, etc.) and to properly report project status
  • Present reports to appropriate management / governance team skillfully
  • Plan assigned project (s) including scope, schedule, cost, safety, quality and closeout
  • This includes but not limited to scope definition, estimating, schedule creation and monitoring, cost control measures, procurement/contracting strategies, equipment selection, vendor selection, start-up and commissioning plans, and integration processes such as turnover to operations, and warranty management
  • Execute projects with a focus on Event Free and Operations Quality, according to plan within designed scope, cost and schedule limits
  • Travel to project sites is required
  • Personal vehicle will be driven with mileage reimbursed
Job Responsibility
Job Responsibility
  • Provide leadership, oversight management, delegation and coordination to the various internal and external organizations that are providing services to the project (engineering, project controls, estimating, construction management, supply chain, legal, Environmental Health and Safety, QA/QC, operations, communications, regulatory, security, fuels, transmission, etc.)
  • Structure, lead, and/or assist in leading all project related meetings and reports required to ensure open communication between all team members, key stakeholders, and management (monthly project reviews, kickoff meetings, etc.) and to properly report project status
  • Present reports to appropriate management / governance team skillfully
  • Plan assigned project (s) including scope, schedule, cost, safety, quality and closeout
  • This includes but not limited to scope definition, estimating, schedule creation and monitoring, cost control measures, procurement/contracting strategies, equipment selection, vendor selection, start-up and commissioning plans, and integration processes such as turnover to operations, and warranty management
  • Execute projects with a focus on Event Free and Operations Quality, according to plan within designed scope, cost and schedule limits
  • Travel to project sites is required
  • Personal vehicle will be driven with mileage reimbursed
What we offer
What we offer
  • Health
  • Dental
  • Vision
Read More
Arrow Right
New

Project Engineer

The Project Engineer will be responsible for supporting a project management tea...
Location
Location
United States , Phoenix
Salary
Salary:
Not provided
apollomech.com Logo
Apollo Mechanical Contractors
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Ability to communicate clearly and effectively
  • Proficient with learning and applying technical concepts
  • Ability to multi-task and work under pressure and deadlines
  • Willingness to learn and adapt quickly in a fast-paced environment
  • Display diplomacy and tact in collaborating with a wide variety of colleagues, customers, and suppliers
  • Proficient in Microsoft Office Suite (particularly Excel, Word and Project)
  • Bachelor’s degree or equivalent combination of education and experience
Job Responsibility
Job Responsibility
  • Jobsite documentation (RFIs, change orders, ASIs, supplemental design documentation, QA/QC, submittals, etc.)
  • Manage jobsite logistics such as office supplies and badging/orientation paperwork
  • Coordinate deliveries of equipment and material
  • Assemble estimates and budgets
  • Manage subcontractors and vendors
  • Attend project meetings
  • Write and track purchase orders and subcontracts
  • Update project schedules
  • Craft productivity tracking
What we offer
What we offer
  • Medical, Dental, and Vision
  • 401K with company Match
  • STD, LTD, Voluntary Life benefits
  • Paid Time off
  • Fulltime
Read More
Arrow Right