Qa/qc inspector Job at ASafe Global (Dresden)

Field QA/QC Inspector - Electrical E&I

Site Inspector ensures the implementation of all the quality procedures and stan...

Location

Germany , Hamburg

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

University Degree or Diploma in relevant discipline or equivalent
Experience in the oil and gas industry
At least 5 years relevant experience in a similar role
Experience in Gas Plants and EPC Projects
Fluent English
Excellent IT and analytical skills
Excellent communications, team-oriented and interpersonal skills
Attention to details
Self-motivation and direction, with a strong bias toward timely performance and problem resolution
Only spontaneous candidates with significant experience, consistent with the relevant field and the right to work in EU will be considered for this position.

Job Responsibility

To ensure the implementation of all the Quality/HSE procedures and standards for the areas or activities (subcontractors) of responsibilities, together with the other members of Quality/HSE teams
To support the Construction Material Controller in checking the Supplier’s material prior to the start of works
To address Subcontractor activities for his/her own discipline, ensuring that Plant Construction works are performed according to the applicable engineering specification, site procedures and Site Inspection Plan according to Quality & Safety procedures, as well as according to the terms and conditions of the subcontract
To check that the manpower employed by the Subcontractor continuously respect the requirements of applicable procedures and the Quality level fixed by the same
To check that the equipment employed by the Subcontractor are adequate and calibrated as required according to applicable procedures and to the Quality level fixed by the same
To check that the works performed by the Subcontractor conform to the applicable documents, Safety regulations, and to the Quality level fixed by the same, in coordination with the other members of Quality/HSE teams
To inform the Site Engineer to make the necessary changes when detects any design errors
To promote the non-conformity draft and informs the Construction Manager, supporting them in the nonconformity resolution
Keeping the Construction Manager informed, receive the Request of Inspection from Subcontractors and confirm to proceed with the inspection informing the Client, assume the responsibility in case of Client’s (motivated) rejection of the inspection taking care of remedial action and avoiding the repetition of similar case in future.

Field QA/QC Welding Inspector

Welding Inspector verifies that welded joints, post-weld heat treatments and non...

Location

Germany , Hamburg

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

University Degree or Diploma in relevant discipline or equivalent
CSWIP Level 2 (minimum) certification
Three Level 2 Certification such as VT, PT or MT, RT or UT
Experience in the oil and gas industry
At least 5 years relevant experience in a similar role
Experience in Gas Plants and EPC Projects
Fluent English
Excellent IT and analytical skills
Excellent communications, team-oriented and interpersonal skills
Attention to details

Job Responsibility

To witness the welding coupon and destructive non-destructive test execution on shop or at Laboratories for preparation of Procedure Qualification Record (PQR)
To support the Home office Welding Group during cycle for the approval of Procedure Qualification Record (PQR), Welding Procedure Specification (WPS) and PWHT procedure
To witness the Subcontractor Welder Qualification process
To check that welding material respects the requirements of the approved WPS
To check that welding machines and ovens are continuously calibrated
To check that shop and field welds are performed in compliance with PROJECT specifications and with approved WPS/PQR, NDE and PWHT Procedures, etc.
To witness the execution of non-destructive tests, heat treatment and hardness test
To check the execution of positive material identification test
To grant that welding activities and the tests are recorded by Subcontractors in the welding data base
To check that all repairs are performed correctly, and non-destructive tests are regularly repeated

Qa/qc inspector

This role monitors and maintains Harder’s quality standards while complying with...

Location

United States , Phoenix

Salary:

Not provided

Harder Mechanical Contractors

Expiration Date

Until further notice

Requirements

Ability to communicate and work professionally with a broad spectrum of people including employees, craft, and clients
Knowledge of quality control legal standards and procedures
Organized and productive
Strong time management skills and ability to prioritize tasks on an ongoing basis
2+ years of experience with strong 3D piping knowledge
Previous experience with high purity examination
A current or previous AWS CWI or LEV II certification
Previous experience with structural and piping scopes, as well as process piping detailing experience
Demonstrated experience in high-tech tool install process piping systems
Must be able to pass a background check and drug screen to work on the client site

Job Responsibility

Work with the field team on-site to ensure all quality standards are met
Oversee operations and procedures to make sure there are no deviations from the quality requirements and standards
Track quality control statistics, and complete necessary documentation for the Project Management team, and the client
Inspect field work, and work with the Quality Control team to perform necessary tests and quality control assessments on-site
Understand the quality requirements of the client, Harder Mechanical Contractors, and specific local and state regulations

What we offer

Comprehensive medical, dental, and vision benefits – 100% of employee premiums are paid by the company
Generous retirement package includes: 10% retirement contribution made by the company and a company match up to 2% of your annual salary
Profit sharing
Discretionary annual bonus
Paid vacation and holidays
Harder University training and development, as well as other paid professional development opportunities
Team environment that promotes individual growth

Fulltime

SCS (SCADA/Com) Inspector

Airswift is seeking for a SCS (SCADA/Com) INSPECTOR to work with our client base...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Diploma in Electrical / Control Systems
Minimum 5 years SCADA / SCS Supervision experience

Job Responsibility

Inspect SCADA panel installations, cabling and fiber optics
Witness point-to-point and end-to-end testing
Ensure compliance with QA/QC procedures

Senior Subsea Pipeline Marine Inspector

Airswift are a Global Manpower Provider specializing in the Energy, Infrastructu...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering discipline (Mechanical) with demonstrated knowledge and experience
CSWIP 3.4UC Underwater Inspection Controller (Ref. CSWIP Document No.CSWIP-DIV-7-95 – Part 2)
Current / valid BOSIET, TBOSIET, FOET or TFOET certificate (Ref. OPITO requirements), as applicable, in conjunction with an offshore medical certificate
Experience in conducting QMS audits and QA verification programs for various project phases (i.e., Engineering, Procurement, Construction and Installation (specifically, the Repair / Installation of pipelines and their associated infrastructure) would be preferable
At least six (6) years of working experience in Quality Assurance and Control (QA/QC) within the Oil and Gas industry (i.e., onshore and offshore)
Should have a proven history as a lead 3.4UC underwater inspection controller within demanding subsea/offshore projects
Subsea pipeline project experience is highly desired, with emphasis on pipeline operations, integrity assurance/non-destructive testing (NDT) and inspection, maintenance and/or design and construction
Familiarity with marine vessel operations and the organisational responsibility of the (i) Offshore Construction/Installation Manger, (ii) Vessel Master, (iii) Diving and ROV Supervisors, (iv) Client Representative(s), (v) Certifying Authorities, etc.
Knowledge and working experience of underwater inspection (UWI) in the form of visual inspection and non-destructive testing (NDT) conducted by means of the intervention of diver(s) and/or remotely operated vehicle (ROV) or crewed submersible (i.e., either as a practitioner and/or as the result of training or certification conforming to the requirements of CSWIP Document No. CSWIP-DIV-7-95 – Part 1 and 2)
With respect to UWI and other related activities, shall be familiar with (i) relevant subsea applied inspection systems, (ii) recording and processing of data, (iii) quality assurance (QA), (iv) inspection planning and briefing, (v) the capabilities and limitations of divers/ROV’s and submersibles, and (vi) the care and deployment of equipment

Job Responsibility

Ensure compliance with QatarEnergy LNG systems and processes, including the Project Management System. Engage contractors and applicable third-party organisations with a professional approach and maintain a good working level relationship
Have a knowledge of the front end engineering design (FEED) deliverables and engineering study reports to support the implementation of the Project Quality Plan (PQP) and associated Procedures
Review the project Scope of work, to determine the nature, extent, and frequency of quality verification activities
Monitor, evaluate and report the inspection and testing status of the pipeline repair activities
Maintain interface relationships with Subsea Pipeline Repair Installation, and Inspection Contractors (including nominated specialist third-party Contractor organisation(s)), and the applicable regulatory focal points
especially, those functioning offshore
Review Contractor’s and Vendor’s quality reports / deliverables, in line with the project quality requirements
In conjunction with the QA/QC delegation operating offshore, verify that the repair activities are in accordance with approved documented information (i.e. procedures, specifications, detailed methodologies, etc)
Support the underwater inspection (UWI) activities during the offshore / subsea repairs, by means of the development of job records, preparation of daily reports, review of diver commentary and transfer into the written form, interpretate ROV camera footage and transfer into the written form and be able to produce an oral commentary of the daily activities, as and when required
Monitor the technical inspections, verification, certification and acceptance by Specialist Third Party Inspection (TPI) Contractor, as applicable, and develop the final documentation for each offshore campaign (i.e., PL-49, PL-75, PL-610 and PL-811)

Fulltime

New

Qa/qc Inspector – Electrical & Instrumentation

To provide advanced technical oversight of site inspection activities, ensure th...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Electrical Engineering Diploma or equivalent qualification
Trade Certificates in Electrical and/or Instrumentation (preferred)
Strong knowledge of quality assurance principles and practices
Familiarity with industry codes and standards including: IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/IECEx (IEC 60079 series)
Additional certifications in inspection, QA/QC, or E&I specialization will be an added advantage
Minimum 8 years of QA/QC experience within the oil & gas industry
Experience across both greenfield and brownfield project environments
Extensive exposure to shutdown/turnaround inspection activities, preferably in LNG facilities or similar high-hazard operating plants
Strong capability in conducting inspections and overseeing contractors across procurement, fabrication, construction, installation, and testing phases
Solid understanding and hands-on experience with key E/I standards such as IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/IECEx-60079, etc.

Job Responsibility

Supervise and perform inspections for all Electrical and Instrumentation construction, installation, and testing activities at site
Ensure compliance with COMPANY requirements, approved ITPs, project specifications, and internationally recognized codes and standards
Review, verify, and endorse inspection reports, check sheets, red-line markups, and associated documentation submitted by the Contractor
Monitor and assess the competency and performance of Contractors’ QA/QC Inspectors, providing guidance where necessary
Witness FAT, SAT, and site testing activities such as continuity, insulation resistance, loop checks, functional testing, grounding verification, and cable installation inspections
Verify material compliance at site (cables, panels, instruments, junction boxes, EX equipment, etc.) against approved MRs and datasheets
Support shutdown and brownfield execution teams by ensuring safe and compliant inspection processes under live plant operating conditions
Coordinate with Construction, Commissioning, and HSE teams to resolve technical issues and maintain quality control across all E/I activities
Raise NCRs, surveillance reports, and monitor corrective actions until closeout
Prepare daily/weekly quality reports and escalate any critical quality issues to the QA/QC Engineer

Qa/qc Coordinator

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

BSc degree or higher in Mechanical or Metallurgical Engineering from a recognized Engineering faculty
Valid CSWIP 3.2.1 or AWS Senior Welding Inspection Certificate (SCWI) with at least five years of post-certification experience
B Gas Grade 2 or NACE Level II Coating Inspector qualification is preferable
NDT Level II in RT, UT, PT & MT / NDT qualifications per ASNT or ISO requirements
Certified QMS Lead Auditor in accordance with ISO 9001:2015 with at least five years of auditing experience
Strong knowledge of international codes/standards: EN, ISO, API, ASME, ASTM
Good leadership and communication skills
Ability to work on projects in a complex, multicultural environment
Proficient in MS Office, database management, spreadsheets, and email communication
Minimum 15 years as QA/QC Coordinator or QA/QC Lead, leading multidiscipline QC inspector teams for inspection and testing activities on major oil and gas projects, including offshore process platforms, jackets, subsea pipelines, and all phases of manufacturing, fabrication, construction, and offshore installation

Job Responsibility

Report quality status daily to the Senior Quality Engineer
Supervise and coordinate all activities related to the Quality Management System during construction and installation phases
Ensure all works by contractors, subcontractors, vendors, manufacturers, service providers, and third-party inspectors comply with project specifications, corporate standards, international codes, and QA/QC requirements
Review technical and quality documents, ITPs, and QA/QC procedures in the document management system
Ensure approved QA/QC documents are implemented at worksite level, including quality plans, control procedures, ITPs, and inspection checklists
Lead and coordinate QC inspectors’ activities at fabrication sites, construction sites, and offshore installations
review inspection reports
Monitor contractor/vendor implementation of approved quality requirements and address deficiencies
Act as focal point for resolving shop/site-related quality control issues in consultation with senior quality management
Control and follow up on technical deviations, material substitutions, and changes to inspection/test requirements

New

Qa/qc Electrical Inspector

Airswift is seeking highly skilled and detail-oriented QA/QC Electrical Inspecto...

Location

United States , Sycamore

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

5+ years of experience in electrical inspection and QA/QC for utility-scale solar industry
Solid experience as an owner’s representative with strong supervisory experience
Experience in utility scale solar electrical systems, including fiber installation techniques and all pre-functional and functional testing requirements
Strong understanding of electrical codes, standards, and best practices (NEC, IEEE, NETA, IEC, etc.)

Job Responsibility

Conduct detailed inspections of electrical systems, including low, medium, and high-voltage equipment on solar and storage sites
Verify cable splicing, routing, labeling, and terminations are completed according to approved plans, specifications, and safety standards
Inspect and test fiber optic terminations and communication cabling for proper installation and functionality
Review and validate electrical drawings, one-lines, and as-builts for conformance with installation practices
Perform in-process and final inspections of conduit, cable trays, grounding systems, combiner boxes, inverters, transformers, switchgear, and control panels
Collaborate with project managers, QA/QC teams, and contractors to identify and resolve deficiencies
Document all inspections with detailed reports, punch lists, and corrective actions
Ensure compliance with National Electrical Code (NEC), NFPA, and applicable OSHA safety regulations
Witness and verify electrical testing, such as insulation resistance (megger), continuity, torqueing, and terminations
Support commissioning efforts by validating proper energization procedures and functional testing

Qa/qc inspector

ASafe Global

Location:
Germany , Dresden

Category:
Quality Control

Contract Type:
Not provided

Salary:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
December 06, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Qa/qc inspector

Field QA/QC Inspector - Electrical E&I

Field QA/QC Welding Inspector

Qa/qc inspector

SCS (SCADA/Com) Inspector

Senior Subsea Pipeline Marine Inspector

Qa/qc Inspector – Electrical & Instrumentation

Qa/qc Coordinator

Qa/qc Electrical Inspector

Qa/qc inspector

ASafe Global

Location:Germany , Dresden

Category:Quality Control

Contract Type:Not provided

Salary:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:December 06, 2025

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Qa/qc inspector

Field QA/QC Inspector - Electrical E&I

Field QA/QC Welding Inspector

Qa/qc inspector

SCS (SCADA/Com) Inspector

Senior Subsea Pipeline Marine Inspector

Qa/qc Inspector – Electrical & Instrumentation

Qa/qc Coordinator

Qa/qc Electrical Inspector

Location:
Germany , Dresden

Category:
Quality Control

Contract Type:
Not provided

Job Posted:
December 06, 2025