CrawlJobs Logo

Qa/qc Inspector – Electrical & Instrumentation

airswift.com Logo

Airswift Sweden

Location Icon

Location:
Qatar , Doha

Category Icon
Category:
Energy

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

Not provided
Save Job
Save Icon
Apply Position

Job Description:

To provide advanced technical oversight of site inspection activities, ensure the competency and performance of Contractors’ QA/QC Inspectors, and verify that all Electrical and Instrumentation (E/I) inspections are executed in accordance with COMPANY standards, project specifications, and relevant international codes. This role acts as the field-level focal point for inspection supervision and reporting, working functionally under the QA/QC Engineer.

Job Responsibility:

  • Supervise and perform inspections for all Electrical and Instrumentation construction, installation, and testing activities at site
  • Ensure compliance with COMPANY requirements, approved ITPs, project specifications, and internationally recognized codes and standards
  • Review, verify, and endorse inspection reports, check sheets, red-line markups, and associated documentation submitted by the Contractor
  • Monitor and assess the competency and performance of Contractors’ QA/QC Inspectors, providing guidance where necessary
  • Witness FAT, SAT, and site testing activities such as continuity, insulation resistance, loop checks, functional testing, grounding verification, and cable installation inspections
  • Verify material compliance at site (cables, panels, instruments, junction boxes, EX equipment, etc.) against approved MRs and datasheets
  • Support shutdown and brownfield execution teams by ensuring safe and compliant inspection processes under live plant operating conditions
  • Coordinate with Construction, Commissioning, and HSE teams to resolve technical issues and maintain quality control across all E/I activities
  • Raise NCRs, surveillance reports, and monitor corrective actions until closeout
  • Prepare daily/weekly quality reports and escalate any critical quality issues to the QA/QC Engineer

Requirements:

  • Electrical Engineering Diploma or equivalent qualification
  • Trade Certificates in Electrical and/or Instrumentation (preferred)
  • Strong knowledge of quality assurance principles and practices
  • Familiarity with industry codes and standards including: IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/IECEx (IEC 60079 series)
  • Additional certifications in inspection, QA/QC, or E&I specialization will be an added advantage
  • Minimum 8 years of QA/QC experience within the oil & gas industry
  • Experience across both greenfield and brownfield project environments
  • Extensive exposure to shutdown/turnaround inspection activities, preferably in LNG facilities or similar high-hazard operating plants
  • Strong capability in conducting inspections and overseeing contractors across procurement, fabrication, construction, installation, and testing phases
  • Solid understanding and hands-on experience with key E/I standards such as IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/IECEx-60079, etc.
  • Proven ability to work under tight schedules and constrained execution windows while maintaining quality and safety compliance

Nice to have:

  • Trade Certificates in Electrical and/or Instrumentation
  • Additional certifications in inspection, QA/QC, or E&I specialization
  • Experience preferably in LNG facilities or similar high-hazard operating plants

Additional Information:

Job Posted:
March 03, 2026

Work Type:
On-site work
Icon
Airswift Sweden - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon
PREMIUM
More languages and countries
+ Unlock 31694 hidden job offers
Languages
English Čeština Deutsch Ελληνικά Español Français +15
Countries
United States United Kingdom India Canada Australia +
See plans
Plans from $2.99 / month

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Qa/qc Inspector – Electrical & Instrumentation

Qa/qc Engineer

We are currently looking for a QA/QC Site Engineer to join our Construction team...
Location
Location
Greece , Larisa
Salary
Salary:
Not provided
https://www.metlengroup.com Logo
Metlen Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • University Degree in Electrical Engineering or related field
  • Experience in working on electrical/civil works & inspection activities in electrical works projects like Substations, Power Plants or O&G
  • Previous experience in completion systems, (final walkdown, punch items, turn over packages)
  • Previous exposure to high voltage electrical installation including switchgear and electric drives
  • Hazardous Area installation and equipment ATEX inspection experience
  • Working knowledge of construction standards, codes of practice, regulations / legislation in general and in particular of BS/IEC/ISO/API/ATEX/EEMUA codes and standards relating to electrical and instrumentation work
  • Knowledge of safety regulations
  • Familiar with MS Office Package (excel, outlook etc)
  • Excellent command / highly proficient in spoken and written English
Job Responsibility
Job Responsibility
  • Maintain standards of safety and comply with Project’s Health, Safety and Environment Management System requirements
  • Reports to Site Quality manager, liaise with construction team for quality issues
  • Responsible for the execution (and improvement) of the Project Quality Plan in compliance with the requirements of the project, through the implementation of project’s specifications, procedures, inspection and test plans (ITPs) and method statements (MSs)
  • Issues relevant Request for Inspection (RFI) to the Client and maintains a relevant register file for the progress of inspections
  • Verifies that inspections are performed to the extent defined within the ITPs, by the appropriate staff, with the calibrated equipment, as required
  • Checks all required inspection points and reports as specified within the ITPs and monitors records within Schedules
  • Issues the relevant Quality Records and, when necessary, informs the Quality Control Supervisor for non-conformities
  • Inspect materials/equipment during receipt, verify compliance with the requirements
  • Monitor preservation of equipment during storage/handling and after installation
  • Checks cable/bus bars laying/installation and cable identification
What we offer
What we offer
  • Competitive remuneration package
  • Accommodation
  • Company car
  • Ticket Restaurant Card
  • Group Health Insurance program
  • Discount on the household electricity bill
  • Pension Plan
  • Cooperation, creativity and innovation: we adopt flexible cooperation models to achieve fast results and increased productivity
  • Fulltime
Read More
Arrow Right

Quality Control Manager

GC Energy operates in the industrial investment sector in Poland and abroad. We ...
Location
Location
Poland , Rzeszów
Salary
Salary:
Not provided
gc-energy.eu Logo
GC Energy Sp. z o.o.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 5 + years of Experience as On-Site QA/QC Manager for Electrical and Instrumental installations for Oil and Gas industry
  • Excellent knowledge of English both written and spoken
  • Proficient in the use of Microsoft Office Package. Familiar with other computer packages (eg. MS Project, Outlook, etc)
  • Able to work autonomously and in team
  • Strong problem- solving skills
  • Excellent organization skills in regards to team organization, daily planning, advanced planning, activity planning and experience in final documentation handover.
  • Experience in managing and handling, MS, QCP, ITPs, NCR, RFI, TQ, PL, TBT, MoM and experience in managing all electronic and hard copy archives
  • Excellent communication skills in order to liaise with colleagues, client and management
  • Active particiption in preparation of calculation needs in terms of the Contract
Job Responsibility
Job Responsibility
  • Assuring that the quality management system is being implemented and followed
  • Ensuring Quality Policy, QMS and quality objectives are being implemented and followed
  • Monitoring the performance of the quality teams and quality inspectors, updating and reporting quality progress and assuring quality objectives are being met and fulfilled
  • Responsible for updating and monitoring all quality related databases, final documentation and creating statistics for meetings and evaluation of progress
  • Ensuring that approved Inspection and Test Plans (ITP) are developed prior to the start of each job
What we offer
What we offer
  • Private medical care and group accident insurance
  • High level of independence, developing and implementing new solutions
  • Work in a nice and pleasant atmosphere
  • Necessary work tools
  • Opportunity for professional development
Read More
Arrow Right

Electrical Inspector / Aramco Approved

We are a world leader in Testing, Inspection and Certification (TIC), delivering...
Location
Location
Saudi Arabia , Al Khobar
Salary
Salary:
Not provided
bureauveritas.cz Logo
Bureau Veritas Certification CZ, s.r.o.
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Engineering Degree/ Diploma in Electrical
  • 10+ years proven experience
  • SEC Approval
  • QM01 Electrical - General
  • QM02 Instrumentation - General
  • QM16 Transformers
  • QM17/18 Cables
  • QM19 Motor Control Center-MCC
  • QM20 Switchgear (16)
  • QM21 Generators and Motors
Job Responsibility
Job Responsibility
  • Inspect and monitor SEC Projects in relation to Quality Assurance and Quality Control
  • escalate non-compliance and violation of scope, codes and standards
  • reviews Project Quality Documents and performs other tasks in relation of Projects Quality in area of his or her specialty
  • Review of applicable contractual requirements (technical standards, specifications etc.)
  • Review of QHSE drawings / files / plans and the relevant procedures review and validation of inspection assignment documentation (technical aspects, reference documentation, schedules, drawings, milestones, reporting, logistics, coordination procedure, etc.)
  • Monitor equipment and instrumentation to ensure proper Installation, operation and calibration using inspection procedures, protocol and checklists
  • Execution of inspection reporting including Non-Conformities (NCR’s) and other applicable deliverables, treatment and closing of Non-Conformities / corrective actions
  • Interpretation of results of survey or inspection
  • Respects security guidelines of BV and safeguards personal security in the working environment
  • Initiating internal Inspection reports/INCR’s to construction crew for effective implementation of project quality plan, ITP’s, Method Statements, written procedures, project specifications, Manufacturers' recommendations, Shop drawings etc.
  • Fulltime
Read More
Arrow Right

E&I Inspector

We are seeking an experienced Site Electrical & Instrumentation Inspector to ove...
Location
Location
Netherlands , Rotterdam
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree in Electrical or Instrumentation Engineering
  • Certified and trained to the relevant ATEX level
  • Strong background working on onshore plants within the oil & gas sector
  • Proven experience as a site-based Quality Control Inspector
  • Proficient with inspection tools, documentation systems, and test procedures
  • Working knowledge of industry regulations and safety standards
  • Ability to review, interpret, and implement supplier instruction manuals for E&I equipment
Job Responsibility
Job Responsibility
  • Inspect Electrical & Instrumentation installations in accordance with ITP/ITR requirements
  • Review contractor ITPs, procedures, and quality documentation
  • Sign off ITRs and manage documentation using AP Completions software
  • Compile, manage, and approve E&I test packs
  • Create detailed daily and weekly site reports
  • Support Site Quality with reporting to project leadership
  • Manage, track, and close punch?lists and non?conformances
  • Drive corrective actions and ensure timely resolution with contractors
  • Assist commissioning teams in closing out punch?points
  • Witness Site Acceptance Tests
  • Fulltime
Read More
Arrow Right
New

Senior Lecturer/Associate Professor in Literacy

As a Senior Lecturer / Associate Professor in Literacy, you will play a key role...
Location
Location
Australia , Albury-Wodonga, Bathurst, Port Macquarie, Wagga Wagga
Salary
Salary:
Not provided
csu.edu.au Logo
Charles Sturt University
Expiration Date
June 08, 2026
Flip Icon
Requirements
Requirements
  • A doctoral qualification relevant to literacy or education, with a recognised teaching qualification
  • A strong record of high-quality teaching and student-centred learning
  • An established or emerging research profile aligned to literacy, curriculum or pedagogy
  • The ability to build productive partnerships and contribute to academic leadership
Job Responsibility
Job Responsibility
  • Lead impactful literacy teaching and research
  • Teach across online and on-campus environments
  • Shape future teachers and education practice
  • Contribute to curriculum innovation
  • Build strong relationships with students and partners
  • Provide academic leadership in literacy education
  • Contribute to the School's research profile
  • Supervise higher degree research students
  • Actively engage with professional, community and government stakeholders
  • At Associate Professor level: significant academic leadership, research impact, and contribution to the broader discipline at national/international level
What we offer
What we offer
  • 17% superannuation
  • Fulltime
Read More
Arrow Right
New

Program Manager - Controls and Avionics Solutions

This position is based in Endicott, New York. New York and on-site work will be ...
Location
Location
United States , Endicott
Salary
Salary:
120874.00 - 205486.00 USD / Year
baesystems.com Logo
Baesystems
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in engineering, engineering or manufacturing management, or other discipline
  • Demonstrated ability for building strong customer/ stakeholder relationships
  • Strong communication, negotiation, and presentation skills
  • Ability to interpret data and make data-driven decisions
  • Highly adaptable with strong initiative
  • Demonstrated ability to lead and motivate cross-functional teams
  • Knowledge of the global aviation market and regulatory requirements and/ or military aviation market
Job Responsibility
Job Responsibility
  • Maintaining strong customer relationships and leading a multidisciplinary team to execute complex development programs within schedule and budget
  • Leadership and management oversight of a project team assuring that project’s financials, schedule, and technical objectives are met and that the highest level of customer satisfaction is achieved while meeting all contractual commitments
  • Work effectively and collaboratively with Engineering, Operations, and all Program Office functional leadership to assure deliveries continue to exceed customer commitments and achievement of financial commitments to the company
  • Manages, coordinates, plans, organizes, controls, integrates, and executes projects within the Military Aircraft Systems portfolio
  • Participates in the support of new business and in the development of proposals
What we offer
What we offer
  • Health insurance
  • Dental insurance
  • Vision insurance
  • Health savings accounts
  • 401(k) savings plan
  • Disability coverage
  • Life and accident insurance
  • Employee assistance program
  • Legal plan
  • Discounts on home, auto, and pet insurance
  • Fulltime
Read More
Arrow Right
New

Finance Business Partner (Research)

Full Time, Fixed Term (12 months). Level 7 - $101,421 to $110,819 p.a. (plus 17%...
Location
Location
Australia , Wagga Wagga
Salary
Salary:
101421.00 - 110819.00 AUD / Year
csu.edu.au Logo
Charles Sturt University
Expiration Date
June 02, 2026
Flip Icon
Requirements
Requirements
  • A degree in Accounting or Finance (professional accounting body membership is desirable)
  • Experience in project budgeting, forecasting and financial analysis
  • Background in management accounting or business partnering within complex environments
  • exposure to government funding or higher education is advantageous
  • Excellent stakeholder engagement skills, with the ability to work effectively with academics and researchers
  • Familiarity with business intelligence systems and dashboard reporting
Job Responsibility
Job Responsibility
  • Partner with academics to deliver strategic financial insights that enable research success
  • Directly influence world-class projects and decisions shaping the future of education and innovation
  • Lead initiatives that enhance financial governance, deliver accurate and timely reporting, and support key projects such as cost-pricing systems and research budgeting
  • Help build financial capability across the University, fostering collaboration and continuous improvement
What we offer
What we offer
  • Flexibility with a 35-hour work week
  • Access to hybrid work arrangements
  • 17% superannuation
  • Fulltime
Read More
Arrow Right
New

Associate Lecturer/ Lecturer in Oral Health

Make a real impact by educating future oral health professionals to serve the ur...
Location
Location
Australia , Wagga Wagga
Salary
Salary:
80046.00 - 134965.00 AUD / Year
csu.edu.au Logo
Charles Sturt University
Expiration Date
June 16, 2026
Flip Icon
Requirements
Requirements
  • A qualification relevant to the discipline and appropriate to the level being applied for
  • Full registration (for teaching/research) as a Dentist or Oral Health Therapist with the Australian Health Practitioner Regulation Agency (Ahpra)
  • Excellent understanding of the clinical practice of oral health therapy, supported by a record of teaching and subject coordination relevant to the discipline and appropriate to the level being applied for
  • Evidence of the delivery of high quality student-centred learning and teaching in oral health therapy and/or general dentistry
  • A record of research activity or capability relevant to the discipline and appropriate to the level being applied for, as outlined in the position descriptions, may facilitate the progression of research opportunities
Job Responsibility
Job Responsibility
  • deliver high-quality teaching, clinical supervision and learning experiences in Oral Health
  • work with students in both clinical and preclinical settings while contributing to curriculum development, industry engagement and community partnerships
What we offer
What we offer
  • Generous support provided to assist with relocating to Riverina’s beautiful Wagga Wagga or surrounds
  • 17% superannuation
  • Fulltime
Read More
Arrow Right