Qa/qc Electrical Inspector Job at Airswift Sweden (Sycamore)

Field QA/QC Inspector - Electrical E&I

Site Inspector ensures the implementation of all the quality procedures and stan...

Location

Germany , Hamburg

Salary:

Not provided

Met T&S

Expiration Date

Until further notice

Requirements

University Degree or Diploma in relevant discipline or equivalent
Experience in the oil and gas industry
At least 5 years relevant experience in a similar role
Experience in Gas Plants and EPC Projects
Fluent English
Excellent IT and analytical skills
Excellent communications, team-oriented and interpersonal skills
Attention to details
Self-motivation and direction, with a strong bias toward timely performance and problem resolution
Only spontaneous candidates with significant experience, consistent with the relevant field and the right to work in EU will be considered for this position.

Job Responsibility

To ensure the implementation of all the Quality/HSE procedures and standards for the areas or activities (subcontractors) of responsibilities, together with the other members of Quality/HSE teams
To support the Construction Material Controller in checking the Supplier’s material prior to the start of works
To address Subcontractor activities for his/her own discipline, ensuring that Plant Construction works are performed according to the applicable engineering specification, site procedures and Site Inspection Plan according to Quality & Safety procedures, as well as according to the terms and conditions of the subcontract
To check that the manpower employed by the Subcontractor continuously respect the requirements of applicable procedures and the Quality level fixed by the same
To check that the equipment employed by the Subcontractor are adequate and calibrated as required according to applicable procedures and to the Quality level fixed by the same
To check that the works performed by the Subcontractor conform to the applicable documents, Safety regulations, and to the Quality level fixed by the same, in coordination with the other members of Quality/HSE teams
To inform the Site Engineer to make the necessary changes when detects any design errors
To promote the non-conformity draft and informs the Construction Manager, supporting them in the nonconformity resolution
Keeping the Construction Manager informed, receive the Request of Inspection from Subcontractors and confirm to proceed with the inspection informing the Client, assume the responsibility in case of Client’s (motivated) rejection of the inspection taking care of remedial action and avoiding the repetition of similar case in future.

Qa/qc inspector

Location

Germany , Dresden

Salary:

Not provided

ASafe Global

Expiration Date

Until further notice

Requirements

Technical diploma or certification in Engineering, Construction Management, or a related field
3+ years of QA/QC inspection experience, ideally within semiconductor, cleanroom, or industrial construction
Familiarity with ISO 9001, ITPs, material approvals, and QA/QC documentation standards
Strong attention to detail with the ability to work independently and identify issues early
Fluent in English
Must be eligible to work and be available on-site in Dresden, Germany for the project duration

Job Responsibility

Perform daily inspections on site to monitor construction activities and verify compliance with approved drawings, specifications, and quality standards
Support the QA/QC Engineer in the implementation of quality plans, checklists, and procedures
Conduct material inspections and verify compliance with the required standards and certifications
Witness and document testing activities for concrete, steel, HVAC, piping, and electrical systems
Identify and report non-conformances, assist in root cause analysis, and verify corrective actions
Maintain accurate and timely QA/QC records, including inspection reports, NCRs, and quality logs
Liaise with contractors, subcontractors, and vendors to ensure proper quality control documentation
Support final inspections and contribute to handover packages and close-out documentation

What we offer

Competitive Compensation
Growth Opportunities
Employee Success
Meaningful Impact
Inclusive Workplace

SCS (SCADA/Com) Inspector

Airswift is seeking for a SCS (SCADA/Com) INSPECTOR to work with our client base...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Diploma in Electrical / Control Systems
Minimum 5 years SCADA / SCS Supervision experience

Job Responsibility

Inspect SCADA panel installations, cabling and fiber optics
Witness point-to-point and end-to-end testing
Ensure compliance with QA/QC procedures

Qa/qc Engineer

We are currently looking for a QA/QC Site Engineer to join our Construction team...

Location

Greece , Larisa

Salary:

Not provided

Metlen Group

Expiration Date

Until further notice

Requirements

University Degree in Electrical Engineering or related field
Experience in working on electrical/civil works & inspection activities in electrical works projects like Substations, Power Plants or O&G
Previous experience in completion systems, (final walkdown, punch items, turn over packages)
Previous exposure to high voltage electrical installation including switchgear and electric drives
Hazardous Area installation and equipment ATEX inspection experience
Working knowledge of construction standards, codes of practice, regulations / legislation in general and in particular of BS/IEC/ISO/API/ATEX/EEMUA codes and standards relating to electrical and instrumentation work
Knowledge of safety regulations
Familiar with MS Office Package (excel, outlook etc)
Excellent command / highly proficient in spoken and written English

Job Responsibility

Maintain standards of safety and comply with Project’s Health, Safety and Environment Management System requirements
Reports to Site Quality manager, liaise with construction team for quality issues
Responsible for the execution (and improvement) of the Project Quality Plan in compliance with the requirements of the project, through the implementation of project’s specifications, procedures, inspection and test plans (ITPs) and method statements (MSs)
Issues relevant Request for Inspection (RFI) to the Client and maintains a relevant register file for the progress of inspections
Verifies that inspections are performed to the extent defined within the ITPs, by the appropriate staff, with the calibrated equipment, as required
Checks all required inspection points and reports as specified within the ITPs and monitors records within Schedules
Issues the relevant Quality Records and, when necessary, informs the Quality Control Supervisor for non-conformities
Inspect materials/equipment during receipt, verify compliance with the requirements
Monitor preservation of equipment during storage/handling and after installation
Checks cable/bus bars laying/installation and cable identification

What we offer

Competitive remuneration package
Accommodation
Company car
Ticket Restaurant Card
Group Health Insurance program
Discount on the household electricity bill
Pension Plan
Cooperation, creativity and innovation: we adopt flexible cooperation models to achieve fast results and increased productivity

Fulltime

New

Qa/qc Inspector – Electrical & Instrumentation

To provide advanced technical oversight of site inspection activities, ensure th...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Electrical Engineering Diploma or equivalent qualification
Trade Certificates in Electrical and/or Instrumentation (preferred)
Strong knowledge of quality assurance principles and practices
Familiarity with industry codes and standards including: IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/IECEx (IEC 60079 series)
Additional certifications in inspection, QA/QC, or E&I specialization will be an added advantage
Minimum 8 years of QA/QC experience within the oil & gas industry
Experience across both greenfield and brownfield project environments
Extensive exposure to shutdown/turnaround inspection activities, preferably in LNG facilities or similar high-hazard operating plants
Strong capability in conducting inspections and overseeing contractors across procurement, fabrication, construction, installation, and testing phases
Solid understanding and hands-on experience with key E/I standards such as IEC, NEC, NFPA, BS, NEMA, NETA, ATEX/IECEx-60079, etc.

Job Responsibility

Supervise and perform inspections for all Electrical and Instrumentation construction, installation, and testing activities at site
Ensure compliance with COMPANY requirements, approved ITPs, project specifications, and internationally recognized codes and standards
Review, verify, and endorse inspection reports, check sheets, red-line markups, and associated documentation submitted by the Contractor
Monitor and assess the competency and performance of Contractors’ QA/QC Inspectors, providing guidance where necessary
Witness FAT, SAT, and site testing activities such as continuity, insulation resistance, loop checks, functional testing, grounding verification, and cable installation inspections
Verify material compliance at site (cables, panels, instruments, junction boxes, EX equipment, etc.) against approved MRs and datasheets
Support shutdown and brownfield execution teams by ensuring safe and compliant inspection processes under live plant operating conditions
Coordinate with Construction, Commissioning, and HSE teams to resolve technical issues and maintain quality control across all E/I activities
Raise NCRs, surveillance reports, and monitor corrective actions until closeout
Prepare daily/weekly quality reports and escalate any critical quality issues to the QA/QC Engineer

Electrical QA/QC Engineer

We are seeking a highly qualified and Saudi Aramco and/or SEC-approved Electrica...

Location

Saudi Arabia , Hofof

Salary:

Not provided

Giza Systems

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Electrical Engineering or a related discipline
Mandatory: Current or previous approval as Electrical QA/QC Engineer or Inspector from Saudi Aramco (SAP/ID Number) and/or Saudi Electricity Company (SEC)
Minimum of 8 years of experience in QA/QC roles within OHTL, high-voltage transmission, and substation projects
Hands-on experience in 132/230/380 kV transmission lines, gantry structures, and HV substation installations
Strong knowledge of Saudi Aramco Engineering Standards (SAES), SEC Transmission Construction Standards (TCS), IEC, IEEE, and other applicable international standards
Experience in electrical testing, inspection, and pre-commissioning activities
ISO 9001 Lead Auditor certification or equivalent is preferred
Excellent communication, interpersonal and negotiation skills
Excellent analytical & problem-solving skills
Excellent command of verbal and written English

Job Responsibility

Review, verify, and approve Project Quality Plans (PQP), Inspection and Test Plans (ITPs), Method Statements, shop drawings, and technical submittals related to electrical works for OHTL, gantry, and substation projects
Ensure all electrical materials and equipment comply with approved vendor lists, project specifications, Saudi Aramco standards, and SEC requirements
Conduct site inspections and surveillance for OHTL works including tower grounding, tower erection, hardware installation, conductor and OPGW stringing, sagging, and tensioning activities
Inspect fabrication, erection, alignment, and installation of high-voltage gantry structures and associated electrical components
Inspect installation of substation equipment including transformers, circuit breakers, disconnect switches, busbars, CTs, VTs, surge arresters, cable sealing ends, and control and protection panels
Verify installation of LV, MV, and HV cables including routing, laying, glanding, termination, splicing, identification, and cable management systems
Witness and record electrical testing and pre-commissioning activities such as insulation resistance tests, continuity tests, Hi-Pot/VLF tests, grounding resistance tests, transformer tests, and primary and secondary injection testing
Ensure grounding and bonding systems for OHTL towers, gantries, equipment foundations, and substations are installed as per approved drawings and standards
Maintain accurate records of inspections, test results, and quality documentation
Prepare daily, weekly, and monthly QA/QC reports highlighting inspection status, progress, and quality issues

Fulltime

Quality Control Manager

GC Energy operates in the industrial investment sector in Poland and abroad. We ...

Location

Poland , Rzeszów

Salary:

Not provided

GC Energy Sp. z o.o.

Expiration Date

Until further notice

Requirements

5 + years of Experience as On-Site QA/QC Manager for Electrical and Instrumental installations for Oil and Gas industry
Excellent knowledge of English both written and spoken
Proficient in the use of Microsoft Office Package. Familiar with other computer packages (eg. MS Project, Outlook, etc)
Able to work autonomously and in team
Strong problem- solving skills
Excellent organization skills in regards to team organization, daily planning, advanced planning, activity planning and experience in final documentation handover.
Experience in managing and handling, MS, QCP, ITPs, NCR, RFI, TQ, PL, TBT, MoM and experience in managing all electronic and hard copy archives
Excellent communication skills in order to liaise with colleagues, client and management
Active particiption in preparation of calculation needs in terms of the Contract

Job Responsibility

Assuring that the quality management system is being implemented and followed
Ensuring Quality Policy, QMS and quality objectives are being implemented and followed
Monitoring the performance of the quality teams and quality inspectors, updating and reporting quality progress and assuring quality objectives are being met and fulfilled
Responsible for updating and monitoring all quality related databases, final documentation and creating statistics for meetings and evaluation of progress
Ensuring that approved Inspection and Test Plans (ITP) are developed prior to the start of each job

What we offer

Private medical care and group accident insurance
High level of independence, developing and implementing new solutions
Work in a nice and pleasant atmosphere
Necessary work tools
Opportunity for professional development

Qaqc Supervisor

At Enertis Applus+, we are looking for a QAQC Supervisor to join our Engineering...

Location

United States , Puerto Rico

Salary:

Not provided

Enertis Applus+

Expiration Date

Until further notice

Requirements

Professional in Engineering (Civil, Mechanical, or Electrical) with a postgraduate degree in project management
Must hold a valid professional license
Proficiency in Microsoft Office and quality management systems
Total experience as a QA/QC Coordinator: 5 years in supervisory and/or coordination roles within Quality Systems for projects in the industrial sector
Specific experience for the position: 3 years as an inspector or auditor in industrial sectors, preferably in the electrical and/or hydrocarbons sector. This experience will be counted from the start of professional practice under a valid professional license.

Job Responsibility

Ensure compliance with current regulations
Monitor and report all activities, processes, and procedures
Develop internal audit tools and carry out internal audits and reports
Determine data-based solutions and follow up on the implementation of quality improvement plans
Conduct inspections and periodic reviews to ensure that the contractor complies with quality and safety policies
Prepare and maintain organized quality management documentation
Manage and update information on the Project’s SharePoint
Monitor compliance with dossier progress
Implement tools that ensure quality control and assurance in processes, reports, records, and certificates
Ensure compliance with regulations and standards in the execution and presentation of tests and trials that validate multidisciplinary construction stages

What we offer

Professional growth opportunities with a well-defined career plan
Be part of a company in constant expansion
Hybrid or remote work modality (depending on profile and location)
Flexible working hours and excellent work-life balance
A positive corporate culture
Personal and professional growth
A hybrid working model
Flexibile retribution scheme
The tax saving benefits we offer include health insurance, lunch vouchers, public transport tickets and kindergarten.

Qa/qc Electrical Inspector

Airswift Sweden

Location:
United States , Sycamore

Category:
Energy

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
March 04, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Qa/qc Electrical Inspector

Field QA/QC Inspector - Electrical E&I

Qa/qc inspector

SCS (SCADA/Com) Inspector

Qa/qc Engineer

Qa/qc Inspector – Electrical & Instrumentation

Electrical QA/QC Engineer

Quality Control Manager

Qaqc Supervisor

Qa/qc Electrical Inspector

Airswift Sweden

Location:United States , Sycamore

Category:Energy

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:March 04, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Qa/qc Electrical Inspector

Field QA/QC Inspector - Electrical E&I

Qa/qc inspector

SCS (SCADA/Com) Inspector

Qa/qc Engineer

Qa/qc Inspector – Electrical & Instrumentation

Electrical QA/QC Engineer

Quality Control Manager

Qaqc Supervisor

Location:
United States , Sycamore

Category:
Energy

Contract Type:
Not provided

Job Posted:
March 04, 2026