QA Assurance III Job at Navarro Inc (Carlsbad)

Senior Subsea Pipeline Marine Inspector

Airswift are a Global Manpower Provider specializing in the Energy, Infrastructu...

Location

Qatar , Doha

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor’s degree in engineering discipline (Mechanical) with demonstrated knowledge and experience
CSWIP 3.4UC Underwater Inspection Controller (Ref. CSWIP Document No.CSWIP-DIV-7-95 – Part 2)
Current / valid BOSIET, TBOSIET, FOET or TFOET certificate (Ref. OPITO requirements), as applicable, in conjunction with an offshore medical certificate
Experience in conducting QMS audits and QA verification programs for various project phases (i.e., Engineering, Procurement, Construction and Installation (specifically, the Repair / Installation of pipelines and their associated infrastructure) would be preferable
At least six (6) years of working experience in Quality Assurance and Control (QA/QC) within the Oil and Gas industry (i.e., onshore and offshore)
Should have a proven history as a lead 3.4UC underwater inspection controller within demanding subsea/offshore projects
Subsea pipeline project experience is highly desired, with emphasis on pipeline operations, integrity assurance/non-destructive testing (NDT) and inspection, maintenance and/or design and construction
Familiarity with marine vessel operations and the organisational responsibility of the (i) Offshore Construction/Installation Manger, (ii) Vessel Master, (iii) Diving and ROV Supervisors, (iv) Client Representative(s), (v) Certifying Authorities, etc.
Knowledge and working experience of underwater inspection (UWI) in the form of visual inspection and non-destructive testing (NDT) conducted by means of the intervention of diver(s) and/or remotely operated vehicle (ROV) or crewed submersible (i.e., either as a practitioner and/or as the result of training or certification conforming to the requirements of CSWIP Document No. CSWIP-DIV-7-95 – Part 1 and 2)
With respect to UWI and other related activities, shall be familiar with (i) relevant subsea applied inspection systems, (ii) recording and processing of data, (iii) quality assurance (QA), (iv) inspection planning and briefing, (v) the capabilities and limitations of divers/ROV’s and submersibles, and (vi) the care and deployment of equipment

Job Responsibility

Ensure compliance with QatarEnergy LNG systems and processes, including the Project Management System. Engage contractors and applicable third-party organisations with a professional approach and maintain a good working level relationship
Have a knowledge of the front end engineering design (FEED) deliverables and engineering study reports to support the implementation of the Project Quality Plan (PQP) and associated Procedures
Review the project Scope of work, to determine the nature, extent, and frequency of quality verification activities
Monitor, evaluate and report the inspection and testing status of the pipeline repair activities
Maintain interface relationships with Subsea Pipeline Repair Installation, and Inspection Contractors (including nominated specialist third-party Contractor organisation(s)), and the applicable regulatory focal points
especially, those functioning offshore
Review Contractor’s and Vendor’s quality reports / deliverables, in line with the project quality requirements
In conjunction with the QA/QC delegation operating offshore, verify that the repair activities are in accordance with approved documented information (i.e. procedures, specifications, detailed methodologies, etc)
Support the underwater inspection (UWI) activities during the offshore / subsea repairs, by means of the development of job records, preparation of daily reports, review of diver commentary and transfer into the written form, interpretate ROV camera footage and transfer into the written form and be able to produce an oral commentary of the daily activities, as and when required
Monitor the technical inspections, verification, certification and acceptance by Specialist Third Party Inspection (TPI) Contractor, as applicable, and develop the final documentation for each offshore campaign (i.e., PL-49, PL-75, PL-610 and PL-811)

Fulltime

Aircraft Maintenance Engineer - Surface Finisher

At Boeing, we innovate and collaborate to make the world a better place. We’re c...

Location

Australia , Amberley

Salary:

Not provided

Boeing

Expiration Date

Until further notice

Requirements

Certificate III in Aeroskills (Surface Finishing) or equivalent qualification
Demonstrated understanding of Quality Assurance (QA) procedures and ability to self-certify maintenance tasks
Eligibility to obtain and maintain a Defence Security Clearance (Negative Vetting 1)
Knowledge of Occupational Health and Safety (OHS) standards and commitment to maintaining a safe workplace
Hold a current C class driver's license

Job Responsibility

Perform surface finishing tasks on aircraft and components, ensuring compliance with all technical documentation and quality standards
Certify completed work and maintain accurate maintenance records
Provide supervision and on-the-job training to junior technicians
Collaborate with maintenance planning teams to support aircraft servicing schedules
Promote and uphold a safe working environment by following EH&S policies
Participate in shift rotations, including A and B shifts

What we offer

$10,000 sign-on bonus
Competitive salary and allowances under our Enterprise Agreement
Generous study assistance and career development support
Employee Assistance Program and wellbeing initiatives
Discounts on health insurance, travel, and accommodation
Comprehensive leave options including Paid Parental Leave, Defence Reservist Leave, Gender Affirmation Leave, and First Nation Cultural Leave
Opportunities to engage with community and STEM programs

Fulltime

Aircraft Mechanic III – APG / Engines

The T-38 Aerospace Propulsion Technician inspects, maintains, modifies, tests, a...

Location

United States , Birmingham

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

High School Diploma or equivalent
8+ years of relevant aircraft maintenance experience with fixed wing commercial, Government or DOD aircraft
Must have current practical experience on maintaining, servicing, removing, and installing General Electric J85-GE-5 turbojet with afterburner propulsion system or similar systems
Experience supporting DoD contracts
Knowledge of commonly used concepts, practices, and procedures within the field
Must have the ability to obtain and maintain a Government Security Clearance

Job Responsibility

Inspects, maintains, modifies, tests, and repairs propellers, turboprop and turboshaft engines, jet engines, small gas turbine engines, and engine ground support equipment (SE)
Manages aerospace propulsion functions and activities
Removes, installs, inspects, repairs, T-38 A/B/C propulsion systems, modules and components
Prepares propulsion systems for receiving / installation, storage, or transportation
Tests components using bench mockups and test equipment
Installs and removes propulsion systems on stands, and operates, evaluates, and performs test stand functions
Inspects and maintains propulsion ground SE
Performs operator inspections on related SE
Implements maintenance and safety policies for propulsion systems
Analyzes, interprets, and recommends propulsion systems maintenance actions based on unscheduled removals and monitoring system data

Fulltime

Aircraft Mechanic III - Structures

The Aircraft Structural Mechanic III is responsible for assessing aircraft damag...

Location

United States , Birmingham

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

High School Diploma or equivalent required
12+ years of relevant aircraft structural maintenance experience with fixed / rotary wing commercial, Government or DOD aircraft
5+ years of depot level structural maintenance experience
Previous Air Force Specialty Code 2A773 highly desirable
Multi aspect aviation qualifications / certifications / disciplines and ability to train these skills a must
Experience supporting DoD contracts
Strong knowledge of commonly used concepts, practices, and procedures within depot level maintenance
Federal Aviation Administration (FAA) Airframe and/or Powerplant certification a plus
Must have the ability to obtain and maintain a Government Security Clearance

Job Responsibility

Inspect / assess damage to aircraft structural components and formulate proper repair/replacement procedures utilizing applicable technical data
Remove and install close tolerance, high-strength fasteners in major aircraft structural components
Designs structural repair, modification, and corrosion protection treatments with respect to original strength, weight, and contour to maintain structural integrity
Perform post repair flight control weight and balance functions as well as control surface rigging per designated technical orders
Inspect components/repairs for structural serviceability according to specifications and technical publications
Manufactures / use jigs, fixtures, forms, and molds to fabricate repair or replacement parts
Use advanced metalworking practices, equipment, and tools to form, cut, bend, and fasten replacement or repair parts to damaged structures and components
Able to train shop drawing and depot level metal layout techniques
shop mathematics
corrosion identification, removal, repair, and prevention

Fulltime

Aircraft Sheet Metal – Structures Mechanic

Yulista has immediate openings for qualified Aircraft Sheet Metal – Structures M...

Location

United States , Birmingham

Salary:

Not provided

Yulista Holdings

Expiration Date

Until further notice

Requirements

High School Diploma or equivalent
Level II: 5+ years of relevant aircraft depot level structural maintenance experience with fixed / rotary wing commercial, Government or DOD aircraft
Level III: 12+ years of relevant aircraft structural maintenance experience with fixed / rotary wing commercial, Government or DOD aircraft, 5+ years of which having performed depot level structural maintenance
Ability to read and interpret documents such as engineering drawings, technical documentation, operating and maintenance instructions, and procedure manuals
Highly knowledgeable of fixed wing aircraft construction features, identification and characteristics of aerospace materials
Extensive knowledge in fabrication and depot repair / replacement of metal components, tubing, cable, plastic, fiberglass, bonded honeycomb, and composite structural components
Intermediate computer skills specifically using Microsoft Office Suite
Ability to use general office equipment such as fax, phone, copier, scanner, printers
Ability to follow processes
Ability to perform basic mathematical computations

Job Responsibility

Inspect / assess damage to aircraft structural components and formulate proper repair/replacement procedures
Remove and install close tolerance, high-strength fasteners in major aircraft structural components
Designs structural repair, modification, and corrosion protection treatments
Perform post repair flight control weight and balance functions as well as control surface rigging
Inspect components/repairs for structural serviceability
Manufactures / use jigs, fixtures, forms, and molds to fabricate repair or replacement parts
Use advanced metalworking practices, equipment, and tools to form, cut, bend, and fasten replacement or repair parts
Able to train shop drawing and depot level metal layout techniques
Recommends methods to improve equipment performance and maintenance procedures
Uses automated maintenance systems

What we offer

Values culture, teamwork, and atmosphere
Competitive pay
Robust benefits package

Fulltime

Business Analyst III-Private Banking

Serve as a liaison between the business community and the IT organization in ord...

Location

United States , Los Angeles

Salary:

60.00 - 69.00 USD / Hour

INSPYR Solutions

Expiration Date

Until further notice

Requirements

Knowledge of: Functional, operational and technical requirements of assigned project(s)
Concepts of risk management, issue tracking, change management and requirements gathering
Concepts, practices and procedures analyzing business processes
Investment concepts, practices and procedures used in the securities industry
The use of technology in business
The relationship between IT and business
Core business competencies such as finance, management, accounting, operations, and marketing
More detailed awareness of the business context of a technical solution, including specific business goals associated with the project, how the project will meet the goals, and their own part in advancing the goals
General financial industry knowledge and knowledge of supported business area. Skill in: Business Analysis tools: Microsoft Office suite (Word, Excel, PowerPoint, and Outlook), Software Engineering Methodology (SEM) process, Change Management, Project Management tools (MS Project), basic database query language usage, time tracking tools, Use Case / UML, advanced quality assurance (QA) tool usage for test case development, execution, and defect tracking/issue tracking software
Creating and interpreting process maps and flowcharts

Job Responsibility

Adheres to established standards and maintains currency in business analysis practices, procedures and techniques
Consults with users to identify, analyze, refine and document business requirements
Coordinates project scheduling with appropriate entities
Develops and maintains project schedules and produces project reports and documentation
Develops conceptual design documents, including project definition, alternative solutions, scope of work, functional specifications, and logical skeletons for new systems
Follows up with internal clients about completed tasks to ensure client satisfaction
Identifies requirements for testing, develops test plans and scripts and coordinates test transmissions, as required. Tests software
May determine appropriate actions in emergency situations to ensure data is secure and available for use as soon as possible
May prepare project proposals and project plans
Provides training and may lead the work of others, as required

QA Technician III

Quality associates support the development and implementation of programs to est...

Location

United States , San Diego

Salary:

25.00 - 30.00 USD / Hour

MillenniumSoft Inc

Expiration Date

Until further notice

Requirements

High school diploma
Daily working knowledge of SAP
Computer skills required, such as Microsoft Word, Microsoft Excel and the use of email
Pharmaceutical, Biotech, Medical Device, Regulatory, or QA experience preferred
Limited / Basic application of Quality systems principles and concepts ( e.g. Document control, Complaint Mgt or other broad Quality Systems area)
Basic knowledge of ISO 9001, ISO 13485, and other applicable regulatory bodies
Limited/Basic application of Quality Systems principles and applicable Regulatory and/or Business requirements
Self-driven and detail oriented
Able to work independently and with minimal supervision
Demonstrated ability to perform detail-oriented work with high degree of accuracy

Job Responsibility

Consistent application of Quality System standards to assigned area
Develops solutions to routine assigned activities of limited to moderate scope & complexity
Follows applicable Company / Unit procedures and may make updates to procedures and policies
Proactively manages group and/or personal metrics to ensure goals are tracked and met
Works within and across functions for assigned Quality systems
Monitors and plans daily workload in the most efficient/productive manner
Provides guidance to Manufacturing associates to ensure adherence to Quality System Procedures as needed
Communicates the need for standards and process compliance to members of functional area
Effectively collaborates with functional group
Communicates issues related to lack of resources to managers in a proactive manner

Fulltime

Validation Engineer III

The Validation Engineer III performs an array of well-defined validation activit...

Location

United States , Bedford

Salary:

Not provided

PCI Pharma Services

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Engineering or related scientific discipline required with a minimum of 6 years of Pharmaceutical industry experience or combination of work experience in Validation, QA, MFG, or Engineering
Experience in pharmaceutical or biopharmaceutical environment in operations/engineering/manufacturing/quality environments
Combination of equipment qualification, process validation, or cleaning validation is acceptable
QA pharmaceutical experience also preferred
Validation experience with the following is highly preferred: Thermal characterization, Vacuum physics, Heat and mass transfer, Formulation, Aseptic Filling and Lyophilization, Steam Sterilization
Experience in multiple regulatory inspections and knowledgeable in current industry standards and regulatory trends as they pertain to Validation of pharmaceutical or biopharmaceutical processes

Job Responsibility

Author validation plans
assist with the development of specifications for user requirements, functional requirements, and design requirements, trace matrices, validation summary reports and test protocols for installation, operation, performance of equipment, functional requirements, risk assessments, and IQ/OQ/PQ
Review commissioning, qualification and validation related system lifecycle documentation (user requirements, functional and design specifications, commissioning and qualification protocols)
Assist with direction on equipment/process change control development (equipment, utilities, facilities, and processes) used to develop and manufacture products in a cGMP environment
Work closely with other validation department personnel as well as cross-functionally with Manufacturing, Engineering, Critical Utilities, Quality Assurance, and project management to achieve all project deliverables
Assist management with mentoring and training of colleagues on policies and procedures including the requirements for validation
Validation representative on validation projects leading by example on projects
Develop and recommend science-based solutions with a focus on continuous improvement and compliance
Perform risk assessment and mitigation steps to achieve attainment and maintenance of a validated state of compliance for all equipment, utilities, processes, materials, and facilities
Coordinate and execute validation protocol activities with consistent and effective communication with affected departments

Fulltime

QA Assurance III

Navarro Inc

Location:
United States , Carlsbad

Category:
Quality Control

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:
March 22, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for QA Assurance III

Senior Subsea Pipeline Marine Inspector

Aircraft Maintenance Engineer - Surface Finisher

Aircraft Mechanic III – APG / Engines

Aircraft Mechanic III - Structures

Aircraft Sheet Metal – Structures Mechanic

Business Analyst III-Private Banking

QA Technician III

Validation Engineer III

QA Assurance III

Navarro Inc

Location:United States , Carlsbad

Category:Quality Control

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Additional Information:

Job Posted:March 22, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for QA Assurance III

Senior Subsea Pipeline Marine Inspector

Aircraft Maintenance Engineer - Surface Finisher

Aircraft Mechanic III – APG / Engines

Aircraft Mechanic III - Structures

Aircraft Sheet Metal – Structures Mechanic

Business Analyst III-Private Banking

QA Technician III

Validation Engineer III

Location:
United States , Carlsbad

Category:
Quality Control

Contract Type:
Not provided

Job Posted:
March 22, 2026