CrawlJobs Logo
Meta Logo Meta · IT - Software Development

Prototype Process Engineer

United States, Redmond Employment contract 173000.00 - 245000.00 USD / Year · Job Posted April 24, 2026
Apply Position
Job Link Share

Job Description

At Meta, we’re building the future of human connection and the technology that enables it. This means continuously inventing and developing technologies for the next generation of experiences. To continue our efforts in the path to AGI, and as we move closer to a future with intelligent robots and advanced AI models, we're hiring talent across a broad range of disciplines from robotics hardware to system software, machine perception, and artificial intelligence. These crucial projects and initiatives taken on by this team have never been done before, so you have a rare opportunity to help us create new ways people connect around the world. Meta Robotics Studio is seeking a highly skilled and experienced Prototype Process Engineer to join our team. As a Prototype Process Engineer, you will be responsible for supporting a cross-functional product design team, focusing on hands-on assembly, process development, and prototype build setup. You will act as a key liaison between design intent and scaling production.

Job Responsibility

  • Support a cross-functional product design team with hands-on assembly
  • Develop process flows and quality work instructions for prototype builds
  • Identify fixturing and tooling needs for prototype assembly
  • Setup and manage prototype builds from start to finish
  • Work embedded with engineering teams during initial unit builds to ensure design intent is maintained and to facilitate updates to the scale line
  • Act as the conduit for design intent and updates between engineering and the scale line
  • Support troubleshooting and field service questions for downstream issues
  • Serve as the primary point of contact for issues found by users
  • Coordinate with cross-functional teams to ensure alignment and collaboration
  • Ensure compliance with company policies, procedures, and standards
  • Identify opportunities for process improvements and implement changes to increase efficiency and effectiveness

Requirements

  • BS or MS degree in engineering or related field, or equivalent experience
  • 5+ years of experience in consumer electronic products
  • Experience with hardware development cycle and sustaining hardware
  • Experience in manufacturing assembly and test development

Nice to have

  • Demonstrated ability to integrate AI tools to optimize/redesign workflows and drive measurable impact (e.g., efficiency gains, quality improvements)
  • Experience adhering to and implementing responsible, ethical AI practices (e.g., risk assessment, bias mitigation, quality and accuracy reviews)
  • Demonstrated ongoing AI skill development (e.g., prompt/context engineering, agent orchestration) and staying current with emerging AI technologies
  • Experience optimizing design of existing products or devices
  • Experience with optical electro-mechanical systems
  • Experience with building cross-functional relationships
  • Experience with driving for results, motivation, and urgency

What we offer

  • bonus
  • equity
  • benefits
Meta - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Prototype Process Engineer

8 matching positions

Prototype Process Engineer- Robotics Studio

At Meta, we’re building the future of human connection and the technology that e...
Location
Location
United States , Redmond, WA +1 location
Salary
Salary:
144000.00 - 204000.00 USD / Year
meta.com Logo
Meta
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS or MS degree in engineering or related field, or equivalent experience
  • 5+ years of experience in consumer electronic products
  • Experience with hardware development cycle and sustaining hardware
  • Experience in manufacturing assembly and test development
Job Responsibility
Job Responsibility
  • Support a cross-functional product design team with hands-on assembly
  • Develop process flows and quality work instructions for prototype builds
  • Identify fixturing and tooling needs for prototype assembly
  • Setup and manage prototype builds from start to finish
  • Work embedded with engineering teams during initial unit builds to ensure design intent is maintained and to facilitate updates to the scale line
  • Act as the conduit for design intent and updates between engineering and the scale line
  • Support troubleshooting and field service questions for downstream issues
  • Serve as the primary point of contact for issues found by users
  • Coordinate with cross-functional teams to ensure alignment and collaboration
  • Ensure compliance with company policies, procedures, and standards
What we offer
What we offer
  • bonus
  • equity
  • benefits
Read More
Arrow Right

Process Engineer

Location
Location
China , Shenzhen
Salary
Salary:
Not provided
formlabs.com Logo
Formlabs GmbH
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor degree in engineering programs
  • At least two years of experience in design or process engineering work
  • At least three years of sourcing or purchasing work experience
  • Experience in one or more of the manufacturing process like injecting , bending, stamping, machining process etc
  • Willing to study different process knowledge and share with team members
  • Ability in writing English in document
Job Responsibility
Job Responsibility
  • Manage the earlier stage of cost analysis evaluate and predict
  • Give the manufacturing process suggestion for parts design during project and output the analysis document
  • Collaborate with Sourcing and OPS team ,sourcing and quote the part cost for engineers
  • Manage the prototype and special samples for RD team
  • Bom and drawing management
  • Manufacturing knowledge management and organize in team document
  • Fulltime
Read More
Arrow Right

Commissioning Process Engineer

Define and update the commissioning processes and specifications in alignment wi...
Location
Location
Spain , Madrid
Salary
Salary:
Not provided
nordex-online.com Logo
Nordex Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree in Industrial Engineering or similar
  • Control processes in CAD-PLM (Teamcenter, Windchill, CREO viewer, autoCAD, Teamcenter Visualization), Microsoft Office (Word, Excel, Powerpoint), MS Project, SAP
  • Teamwork and strong communication skills for interdepartmental collaboration
  • High English level
  • Between 3 and 5 years of experience
  • Availability to travel occassionally
Job Responsibility
Job Responsibility
  • Define and update the commissioning processes and specifications in alignment with needs from PM COM and requirements from WTG designers
  • Design and validate tools for maintenance, testing and commissioning of Nordex turbines considering requirements from engineering, PM, QHSE and Sourcing
  • Translate lessons learned from windfarms and factories into requirements for Engineering
  • Analyse and establish Commissioning Process&Tools based on product design parameters
  • Take part in product development groups and review designs
  • Definition and validation of Commissioning tools
  • Creation of Commissioning manuals
  • Solve incidents and improvements opened by Windfarms and Quality Departments related to Maintenance and Commissioning documents and tools
  • Travel to ports, plants and Windfarms for new tools or turbine prototypes
What we offer
What we offer
  • Opportunity to make our world a little more sustainable
  • Fulltime
Read More
Arrow Right

Installation Process Engineer

Define and update the Installation processes and specifications in alignment wit...
Location
Location
Spain , Madrid
Salary
Salary:
Not provided
nordex-online.com Logo
Nordex Group
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree in Industrial Engineering or similar
  • Between 3 and 5 years of experience in a similar role
  • Control processes in CAD-PLM (Teamcenter, Windchill, CREO viewer, autoCAD, Teamcenter Visualization), Microsoft Office (Word, Excel, Powerpoint), SAP
  • Teamwork and close relationship with other departments
  • High English is compulsory
  • Ability to make short trips
Job Responsibility
Job Responsibility
  • Define and update the Installation processes and specifications in alignment with the needs from PM Ops and the requirements from WTG designers
  • Design and validate tools for installation of Nordex turbines considering requirements from engineering, PM, QHSE and Sourcing
  • Translate the lessons learned from Wind Farm’s into requirements for Engineering to improve the WT design
  • Analyse and establish Installation Process&Tools based on parameters and characteristics of the product design
  • Take part in product development groups. Review designs and propose improvements and corrections from Installation and COE perspective
  • Creation of Installation manuals
  • Solve incidents and improvements actions opened by PM Ops and Quality Departments related to Installation documents and tools
  • Travelling to Wind Farms or factories for new tools or turbine prototypes to validate/review Installation processes
What we offer
What we offer
  • In addition to the opportunity to make our world a little more sustainable, we offer you:
  • Some offers may vary by location
  • Fulltime
Read More
Arrow Right

Process Engineer

Location
Location
China , Taicang
Salary
Salary:
Not provided
akg-turkey.com Logo
AKG Termoteknik Sistemler
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor Degree or above，Mechanical/electrical related major or engineering background
  • Five years working experience in mechanical or industry engineering area
  • Ability for using CAD and 3D drawing software, three years working experience with fixture and tool design
  • Ability for communication in both English and Chinese. Know well about Microsoft office
  • With strong communication, organization, coordination ability, good team work skills, highly responsible work, honest, can work independently, willing to learn and share.
Job Responsibility
Job Responsibility
  • Design tools and/or machines of varying types which are used in manufacturing
  • Re-design, repair, or replace in-process production program equipment, production
  • Develop processes, methods, tooling and production controls for new product
  • Set up new equipment, ensure satisfactory operation, and instruct others to properly
  • Write procedures for the operation of new or existing equipment
  • Implement process improvements
  • Participate in the transition of product from design to prototype to full production
  • Design and development of FMEA's
  • Optimize and maintain the current standard working time calculation.
  • Fulltime
Read More
Arrow Right

Manufacturing Process Engineer III

The Manufacturing Process Engineer III develops and optimizes complex processes,...
Location
Location
United States , Redmond
Salary
Salary:
115000.00 - 150000.00 USD / Year
sigmadzn.com Logo
Sigma Design
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Engineering
  • Master's preferred
  • 5+ years of related Process Engineering experience
  • Proven ability to integrate mechanical and electrical systems in small-batch or one-off builds
  • Strong command of DFM/DFA principles and practical experience influencing design decisions
  • Skilled in fixture/tooling development, process documentation, and build optimization
  • Proficient with CAD software and process simulation tools
  • Knowledge of quality systems, process validation, and root cause analysis methods
  • Experienced in Lean Manufacturing and Six Sigma principles, adapted for flexible, non-production workflows
  • Excellent interpersonal and communication skills, including direct client engagement and cross-functional collaboration
Job Responsibility
Job Responsibility
  • Design and implement advanced processes and assembly methods for prototype and low-volume electro-mechanical systems
  • Create process flows, work instructions, and fixture/tooling specifications that enable efficient prototype builds and testing
  • Provide expert Design for Manufacturing (DFM) and Design for Assembly (DFA) input during early product development
  • Lead process development and validation activities for new technologies and materials in an R&D setting
  • Architect assembly and test tooling, including defining requirements, reviewing designs, and overseeing implementation
  • Partner with cross-functional teams to iterate quickly on process concepts and troubleshoot technical issues in real time
  • Apply Lean and Six Sigma principles to reduce waste, improve build repeatability, and increase efficiency — tailored to a prototype environment
  • Serve as the technical lead for complex build programs, ensuring processes meet quality, cost, and schedule targets
  • Mentor junior engineers and technicians in process design, documentation, and build best practices
  • Interface directly with customers and internal project teams to communicate technical solutions and recommendations
What we offer
What we offer
  • competitive compensation
  • a 401(k) with up to 4% company match
  • quarterly bonus program
  • 15-days of accrued PTO
  • 9 company paid holidays
  • multiple options for medical insurance
  • dental insurance
  • voluntary benefits: vision, long-term disability, and life insurance
  • Fulltime
Read More
Arrow Right

Process Engineer

A great Robert Half client is seeking a Process Engineer to develop, refine, and...
Location
Location
United States , Wixom, MI
Salary
Salary:
Not provided
https://www.roberthalf.com Logo
Robert Half
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Mechanical, Manufacturing, or Industrial Engineering
  • 5+ years of experience in precision CNC machining (aerospace experience preferred)
  • Strong understanding of GD& T and blueprint interpretation
  • Experience working with tight tolerances (±0.0005” or tighter)
  • Experience machining aerospace materials including Titanium, Inconel, Aluminum alloys, and Stainless Steel
  • Working knowledge of SPC and quality management systems
Job Responsibility
Job Responsibility
  • Develop and optimize CNC machining processes (milling, turning, grinding) for aerospace components
  • Select tooling, cutting parameters, and workholding solutions for tight-tolerance parts
  • Create and maintain process documentation and standardized work instructions
  • Support new product introduction (NPI) from prototype through full production
  • Conduct root cause analysis for dimensional, surface finish, and quality issues
  • Improve cycle times, reduce scrap, and increase overall machine utilization
  • Perform capability studies (Cp, Cpk) and apply statistical process control (SPC) methods
  • Ensure compliance with AS9100 and other aerospace quality standards
  • Collaborate with programming, quality, and production teams
  • Assist with capital equipment selection, implementation, and machine validation
What we offer
What we offer
  • medical, vision, dental, and life and disability insurance
  • company 401(k) plan
Read More
Arrow Right

Process Engineer

Join our innovative team. Want to do more than just imagine the ways our world w...
Location
Location
China , Shanghai
Salary
Salary:
Not provided
aptiv.com Logo
Aptiv plc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Engineering
  • 3-5 years’ SMT and PTH experience in a high volume Electronics Manufacturing environment, with particular emphasis on experience
  • Well working knowledge of manufacturing process design, cycle time Analysis, APQP, MSA, PFMEAs, DFM Rules, Lean six sigma tools
  • Familiar with ISO9000. ISO14000 and IATF16949 system requirement and 6 SIGMA
  • Good English on both spoken and written is plus
Job Responsibility
Job Responsibility
  • Handle NPI, co-work with global team to complete DFM, process design, PFMEA, new product quotation estimation, cooperate engineer team get NPI build readiness completed, lead and participate product PVT build
  • Manage process defect analysis, take prevent action, best practice and lesson learn share to team members
  • Lead and participate customer audit, coordinate engineer team follow up improvement action
  • Coordinate activities of SMT manufacturing operations to obtain optimum efficiency and economy of operations and maximize profits while meeting customer expectations for quality and on-time shipments
  • Lead & manage ECN/ECR implementation on engineering portion
  • Coordinate process, manufacturing and logistics for all activities for a product launch. Prototype series, Pre-Series, Run at Rate and Production release
  • Establish and follow project time schedules, including resource planning
  • Work out and follow action plans
  • Conduct DFM, and work together with Engineering team for product design and process design related issues
  • Handle design reviews for process team and secure manufacturability of product
  • Fulltime
Read More
Arrow Right