Protection and Control Engineer Job at Hedera Hiring Ltd (Bristol)

Protection and Control Engineer

Rehabilitation work for 300KV GIS at Al-Zour South power station. Include remova...

Location

Kuwait

Salary:

1200.00 - 1500.00 KWD / Month

Toshiba EMEA

Expiration Date

Until further notice

Requirements

Protection and control system Engineer at least 7–10-year experience in Kuwait
Familiar with MEW primary substation 400/300/132/33/11/.415 KV
preferred experience in one & half scheme and double busbar as well 400/300/132KV substation
Understand schematic diagram for different manufacturer
Trouble shooting faults
Panel modification work
Prepare project cable list, termination schedule details, red mark drawing and a- built drawing
Carry out coordinate test and commission activities for protection (i.e., busbar protection, 3 Circuit Breaker protection, bay protection, OHL main-1 & Main -2 protection, generator protection and couple TR protection etc.)
Prepare and modify site test report for protection & control Panel and follow up with client for approval
Responsible to arrange and open the necessary PTW (permit to work)

Protection and Control Engineer

A large independent connections provider with a very broad and exciting range of...

Location

United Kingdom , Bristol

Salary:

50000.00 - 60000.00 GBP / Year

Hedera Hiring Ltd

Expiration Date

Until further notice

Requirements

Minimum 3 years’ experience designing Protection and Control systems up to 132kV
A good understanding of power industry (particularly UK) including technical standards
Ability to work in a team environment and adhere to budgets and programmes
Good communication skills
At least a HNC or equivalent in an appropriate discipline

Job Responsibility

Producing designs for substation Protection and Control systems from 11kV up to 132kV (Single Line Diagrams, Circuit Diagrams, General Arrangements, Wiring Diagrams, Block Cable Diagrams/Schedules, cable specification/sizing calculations, etc.)
Producing specifications for substation Protection and Control systems from 11kV up to 132kV
Working alongside other designers, construction professionals and engineering teams
Liaising with external stakeholders, including the end client, other design houses and consultancies as well as other internal departments

What we offer

Salary up to £65k
Remote working considered
Corporate benefit package

Parttime

Senior Protection and Control Engineer

You will support Substation and Transmission projects with focus on electrical p...

Location

United States , Reading

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor’s degree in electrical engineering and 8 or more years of protection and controls experience
Extensive experience in protection and control engineering for 69kV and above switchyards and substations
Experience in estimating project costs and writing proposal content
Design and implement advanced protection and control schemes for power systems
Has a competent understanding of regulations, electrical codes, manufacturing standards and industry standard practices
Competent use of relevant software such as MS Office Suite
Self-motivated, organized, and be able to work independently
Strong interpersonal and written communication skills
Professional Engineer (PE) in the United States is preferred

Job Responsibility

Technical execution of complex protection and control project assignments applied to both brownfield and greenfield for Power Networks projects for various clients
Preparation of engineering drawings and documents, calculations, and other miscellaneous deliverables as required
Collaborate with project managers, drafters, civil/structural engineers, and field personnel
Mentor and guide junior engineers
Complete tasks in accordance with project procedures, applicable codes and/or standards, on schedule and within budget
Discuss technical problems and communicate effectively with other project personnel and outside customers
Perform independent audits and reviews of technical work
Perform proposal preparation, proposal estimates, and provide input to scope documents and client presentations
Perform the function of a team leader that can solve complex issues and act as a lead engineer responsible for the quality of the deliverables
Work in a team-oriented environment with ability to work independently or as part of a group when and as required

Lead Protection and Control Engineer

You will support Substation and Transmission projects with focus on electrical p...

Location

United States , Reading

Salary:

Not provided

Airswift Sweden

Expiration Date

Until further notice

Requirements

Bachelor’s degree in electrical engineering and 12 or more years of experience in protection and controls including supervisory experience
Professional Engineer (PE) in the United States
Experience with power system modeling and analysis tools (e.g., ETAP, CYME, SKM)
Extensive experience in protection and control engineering for 69kV and above switchyards and substations
Experience in estimating project costs and writing proposal content
Has a competent understanding of regulations, electrical codes, manufacturing standards and industry standard practices
Competent use of relevant software such as MS Office Suite
Self-motivated, organized, and be able to work independently
Ideal candidate should have strong interpersonal and written communication skills that permit working efficiently alongside senior substation engineers and designers in a team setting

Job Responsibility

Technical execution of complex protection and control project assignments applied to both brownfield and greenfield Power Networks projects for various clients
Expert in designing protection schemes and settings for substations equipment, including bus, line, capacitor, and transformer protection
Develop and improve processes for protection and control designs, including one-lines and three-lines, AC/DC schematics, relay panel drawings and wiring diagrams
Understanding of SCADA communication design
Preparation of specifications and provide procurement support
Preparation of engineering drawings and documents, calculations, and other miscellaneous deliverables as required
Supervise/coordinate other engineers of equal and lesser experience to successfully deliver a project
Complete tasks in accordance with project procedures, applicable codes and/or standards, on schedule and within budget
Discuss technical problems and communicate effectively with other project personnel and outside customers
Perform independent audits and reviews of technical work

Senior Protection and Control Design Engineer (SCADA)

Our client is a leading engineering and design consultancy who specialise in del...

Location

United Kingdom

Salary:

650.00 - 800.00 GBP / Day

Morson Talent

Expiration Date

Until further notice

Requirements

Proven technical capability associated with the design and/or application of power system protection. Preference will be given to candidates with experience in protection application at transmission voltage levels up to 400 kV, gained within a transmission utility, consultancy or manufacturing environment. Strong candidates with a distribution background will be considered
Preparation of Protection and Control design deliverables, feasibility studies, reports, programmes and cost estimating
Calculation of relay settings and preparation of logic files
Proven ability of working with internal and external parties, e.g. equipment suppliers, manufacturers, service providers, professional bodies, and working within a strong team-working culture
Experience in the preparation of detailed electrical schematic diagrams for substation Protection and Control systems
Experience in Busbar, Feeder, Transformer, Reactor, Circuit Breaker fail, DAR protections and SCADA interface is essential and FACTS, HVDC protection systems is desirable
Protection design utilising conventional and non-conventional Instrument Transformers
Knowledge of IEC61850 communication protocols
Experience in preparing Single Line Diagram, Substation Layout, Key Line Drawings (SLD, KLD)
Experience in preparing Panel general arrangements, panel equipment bill of materials, panel internal wires, termination external cable connection diagrams, cable block diagrams, cable schedules, cable core sheets, cable sizing, DC battery sizing

Job Responsibility

Responsible for the design of transmission protection systems for voltages up to 400 kV
Reviewing in-house designs and those produced by external contractors
Responsible for delivering tender design man-hours estimates, deliverables lists and design programs
Guiding junior engineers through various P&C tasks by offering technical advice and support
Experience in the concepts required in the safe design and operation of electrical networks, and development construction
Advising on design and design change issues
Specialist in an Electrical field but experience and extensive knowledge of other Engineering fields would be advantageous
Substantial experience with Construction and Design Management (CDM)
Ensure that design projects are undertaken by competent personnel and sub-contractors reviewing designs created by others
Challenging, proposing, agreeing and implementing alternative solutions compared with those dictated by the transmission specifications, policies, processes and “best practices”

Engineer, Protection and Controls

P&C Engineer is responsible for completing activities and assignments with the d...

Location

United States , Westwood

Salary:

53.55 - 65.02 USD / Hour

EVERSOURCE

Expiration Date

Until further notice

Requirements

Must pass the minimum physical requirements as prescribed by Eversource
Must have corrective vision, normal color perception, hearing and a sense of smell
Must possess a valid driver’s license to operate motor vehicles
Must possess or be willing and able to obtain the appropriate drivers license and Eversource qualification to operate motor vehicles of any class and type required by the company based on departmental needs
Bachelor of Science degree in Electrical Engineering (BSEE) or Bachelor of Science degree in Electrical and Computer Engineering (BSECE)
Must evidence interest and aptitude necessary for successful progress in the engineering profession
Must possess personality traits such as alertness, self-reliance, poise, tact and the ability to maintain harmonious relations with their associates

Job Responsibility

Complete activities and assignments with the design and operation of protection and control systems necessary for the safe and reliable operation of the transmission and distribution system
Analyze protection system operations, and the appropriate resolutions, in order to provide support to operations on unplanned maintenance
Share accountability with peers in the planning, project management, substation engineering, operations, and maintenance organizations to carry out the efficient and timely completion of system reliability projects, generation interconnection projects and system restoration and troubleshooting efforts
Review and evaluate proposed changes to existing electric facilities to ensure compatibility with established Eversource protection system standards and practices
Create new Protection and Control system designs in accordance with Eversource Standards as required
Specify materials associated with new or modified Protection and Control systems for assigned projects
Develop, calculate, and document settings and logic for protective relays, logic processors, feeder reclosers, and switches necessary to support Eversource system reliability projects and initiatives
Perform coordination studies by modeling and analyzing electric system elements and their protection systems using fault simulation software
Analyze protection system operations during transmission and distribution system disturbances in support of Substation Technical Group Event analysis
Interface with Eversource Planning, Operations and Field personnel to support their efforts to plan, operate and maintain the transmission and distribution system

Fulltime

Engineer, Protection and Controls

P&C Engineer is responsible for completing activities and assignments with the d...

Location

United States , Westwood

Salary:

53.55 - 65.02 USD / Hour

EVERSOURCE

Expiration Date

Until further notice

Requirements

Must pass the minimum physical requirements as prescribed by Eversource
Must have corrective vision, normal color perception, hearing and a sense of smell
Must possess a valid driver’s license to operate motor vehicles
Must possess or be willing and able to obtain the appropriate drivers license and Eversource qualification to operate motor vehicles of any class and type required by the company based on departmental needs
Engineering education as evidenced by a Bachelor of Science degree in Electrical Engineering (BSEE) or Bachelor of Science degree in Electrical and Computer Engineering (BSECE)
Must evidence interest and aptitude necessary for successful progress in the engineering profession
Must possess personality traits such as alertness, self-reliance, poise, tact and the ability to maintain harmonious relations with their associates

Job Responsibility

Review and evaluate proposed changes to existing electric facilities to ensure compatibility with established Eversource protection system standards and practices
Create new Protection and Control system designs in accordance with Eversource Standards as required
Specify materials associated with new or modified Protection and Control systems for assigned projects
Develop, calculate, and document settings and logic for protective relays, logic processors, feeder reclosers, and switches necessary to support Eversource system reliability projects and initiatives
Perform coordination studies by modeling and analyzing electric system elements and their protection systems using fault simulation software
Analyze protection system operations during transmission and distribution system disturbances in support of Substation Technical Group Event analysis
Interface with Eversource Planning, Operations and Field personnel to support their efforts to plan, operate and maintain the transmission and distribution system
Manage and perform work activities with training, guidance and oversight from senior staff and management
Actively support storm and/or emergency restoration assignments
Effectively coordinate work activities with others

Fulltime

Guidance, Navigation, and Control Engineer

As a Controls Engineer, you’ll help shape the way a revolutionary new class of v...

Location

United States , North Kingstown

Salary:

Not provided

REGENT Craft

Expiration Date

Until further notice

Requirements

Proven track record of designing and flight-testing control systems for aircraft, UAS, or similarly complex vehicles
Strong theoretical foundation in control theory, plus hands-on application to real systems
Proven design of real-world control systems and state-estimation filters
Experience designing control algorithms and simulations in MATLAB/Simulink
Demonstrated safety & quality mindset in regulated or mission-critical programs

Job Responsibility

Own vehicle control laws: Design and implement control laws for stabilization, mode transitions, envelope protection, and emergency fallbacks
Apply safety-critical rigor: Define and trace requirements, lead design/code reviews, and develop rigorous test plans including SIL and HIL
Simulate, analyze, refine: Use and extend high-fidelity simulation environments to design and validate GNC algorithms
Integrate multisensor navigation: Develop and optimize state estimation algorithms that integrate GNSS/INS, radar altimeter, and other sensor inputs
Tune with real-world data: Leverage flight test and sea trial data to iteratively refine control algorithms
Collaborate across disciplines: Work closely with aero, hydro, mechanical, and systems teams
Lead test events: Plan, execute, and analyze full-scale test events to validate and mature flight controls

What we offer

Competitive compensation including a robust equity incentive plan
Comprehensive health, dental, and vision insurance - we cover 100% of your premiums
401(k) with company matching
Generous flexible time off, paid parental leave, and company-wide holiday breaks
Relocation packages available
Daily, free catered lunches
Learning & professional development opportunities

Fulltime

Select Country

Protection and Control Engineer

Job Description

Job Responsibility

Requirements

What we offer

Looking for more opportunities?

Protection and Control Engineer

Protection and Control Engineer

Protection and Control Engineer

Senior Protection and Control Engineer

Lead Protection and Control Engineer

Senior Protection and Control Design Engineer (SCADA)

Engineer, Protection and Controls

Engineer, Protection and Controls

Guidance, Navigation, and Control Engineer

Our AI answers in your language