Propulsion Performance Engineer Job at Mach Industries (San Luis Obispo)

Propulsion Performance Engineer - Cycle Analyst/Designer

Mach Industries is searching for an experienced Cycle Analyst/Designer to guide ...

Location

United States , San Luis Obispo

Salary:

130000.00 - 180000.00 USD / Year

Mach Industries

Expiration Date

Until further notice

Requirements

BS in Aerospace, Mechanical Engineering or related field
Proficiency with NPSS
2+ years of experience using NPSS
3+ years of relevant experience in a professional environment
Fundamental knowledge in engine design, aerodynamics and thermodynamics
Must be a U.S. Person due to required access to U.S. export-controlled information

Job Responsibility

Improve cycle model in NPSS and develop cycle models from scratch
Create analytical tools to perform basic analysis
Develop tools/workflows for speeding up repetitive tasks
Work with aerodynamic, structural and mechanical engineers to develop the ultimate components
Develop test procedures for determining performance of components
Analyze test data with simulation tools to assist in determining performance
Communicate cycle results and general engine design knowledge to the team and customers

What we offer

Offers Equity
healthcare
dental and vision plans
retirement savings
paid time off
funds for continuing education, training, and career growth

Fulltime

Senior Hardware Engineer- Propulsion Controller

To achieve our vision of a world with Zero Crashes, Zero Emissions and Zero Cong...

Location

United States , Milford

Salary:

Not provided

General Motors

Expiration Date

Until further notice

Requirements

Bachelors degree (or higher) in Electrical, Computer Engineering or equivalent
5+ years of experience in electronic hardware design, with a strong focus on propulsion controller hardware design and automotive hardware electronics design
Experience in designing propulsion controller hardware and components, such as SoCs, MCUs, Ethernet Switches, PHY, CAN, power supply design, etc
Strong proficiency in circuit design, schematic creation, PCB layout, signal integrity and power integrity, and power management
Experience in design & analysis tools like: Mentor Graphics (schematic & layout), Ansys (signal integrity), Simplis (power integrity), Altair (EMC), Mathcad, PSpice & Saber
Proven ability of successfully launching build-to-print hardware into production
In-depth knowledge of requirements engineering process (FMEA, Preliminary Hazard Analyses)
In-depth knowledge of verification and validation processes
In-depth knowledge of embedded software development, testing and associated tools
Understanding of hardware design and failure mode

Job Responsibility

Design of propulsion controller electrical hardware: from schematic capture, worst case analysis, PCB layout, bring-up, debug, signal integrity and power integrity (SI/PI), design verification test (environmental and EMC), to manufacturing support and production launch
Design and development of the propulsion controller hardware (from concept design to launch) while meeting cost, timing, quality, and safety targets
Collaborate with cross-functional teams, such as software, mechanical, and manufacturing, to ensure seamless integration of the electrical design of the propulsion controller hardware
Work closely with contract manufacturing partners to ensure successful product build, from prototype through to mass production, while maintaining quality, cost, and timing targets
Electrical schematic design and PCB layout
Support new IC design/development strategic to new propulsion controller designs and architectures
Perform/support detailed hardware analysis – worst case analysis, thermal analysis, signal integrity, power integrity, etc
Execute bring-up of hardware design from power supplies, SoCs, MCUs, network devices, solenoid/valve control, instrumentation, etc
Lead design for manufacturing (DFM), design for assembly (DFA), and design for testing (DFT)
Drive the validation and testing of hardware components and systems, ensuring high levels of reliability and performance

What we offer

This job may be eligible for relocation benefits

Fulltime

Sr. Propulsion Engineer

Redwire Space, Inc has an exciting opportunity for a Remote, Sr. Propulsion Engi...

Location

United States

Salary:

Not provided

Redwire Space

Expiration Date

Until further notice

Requirements

Bachelor's degree in Aerospace Engineering, Mechanical Engineering, or related field, with 6+ years of experience
Experience serving as Responsible Engineer or similar role with technical ownership of spacecraft propulsion system architecture, development, and analysis
Experience developing propulsion subsystem requirements, specifications, and interface definitions
Familiarity with electric and chemical propulsion systems, their differences, and trade-offs
Experience performing ∆V budget development and propellant sizing
US Citizen with the ability to obtain a U.S. Government security clearance
Must be able to travel up to 20%

Job Responsibility

Serve as the Responsible Engineer for spacecraft propulsion subsystems across one or more spacecraft programs
Define propulsion subsystem requirements including thrust capability, delta-V budgets, propellant capacity, maneuver timelines, and mission lifetime margins
Perform system level trade studies, design optimization, and performance modeling, to evaluate propulsion technologies and supplier solutions aligned to mission needs
Lead propulsion supplier evaluation, selection, and technical oversight throughout the program lifecycle
Develop subsystem specifications, interface control documents (ICDs), and verification plans for propulsion systems
Coordinate closely with Mission Analysis and GNC teams to ensure maneuver planning and propulsion capabilities are aligned
Ensure propulsion subsystem interfaces with spacecraft avionics, power systems, structures, thermal and software are properly defined and integrated
Develop propulsion test plans and support or execute hot fire, pressure, and environmental tests
Support propulsion subsystem integration, system-level testing, and anomaly resolution during integration and test campaigns
Contribute to hazard analyses, fault management strategies, and safety of operations processes

Fulltime

Propulsion Engineer (Mechanical)

As a Propulsion Engineer (Mechanical) at Magdrive, you will support the design, ...

Location

United Kingdom , Harwell Campus, Oxfordshire

Salary:

50000.00 - 60000.00 GBP / Year

Magdrive

Expiration Date

Until further notice

Requirements

Degree (BEng/MEng/MSc) in Mechanical Engineering, Aerospace Engineering, or similar discipline
3-5 years of experience developing space or high-performance mechanical hardware
Experience supporting environmental test campaigns
Proficiency in professional 3D CAD (e.g. SolidWorks) and structured engineering workflows

Job Responsibility

Design thruster structural components and support mechanical integration from concept through flight hardware
Ensure coherent, clash‑free integration of mechanical and electrical hardware, including structures, components, and PCBs
Support the transition of designs from R&D prototypes to flight release, ensuring compliance with environmental and mechanical requirements
Support mechanical aspects of environmental and functional test campaigns, including test configurations and fixtures
Incorporate MAIT feedback and NCRs to resolve recurring assembly, test, and integration issues at design source
Support definition and verification of mechanical interfaces to the spacecraft, including mounting, alignment, and load paths

What we offer

25 days annual leave + bank holidays + Birthdays, and long-service awards (up to 30 days)
Private medical insurance
Flexible working hours
Remote working where possible
Financial support for home office setup

Fulltime

Propulsion Engineer

Responsible for the definition, integration, and technical oversight of spacecra...

Location

United States , Littleton; Albuquerque

Salary:

140000.00 - 205000.00 USD / Year

Redwire Space

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, or related field, with 6+ years of experience
Experience serving as Responsible Engineer or similar role with technical ownership of spacecraft propulsion system architecture, development, and analysis
Experience developing propulsion subsystem requirements, specifications, and interface definitions
Familiarity with electric and chemical propulsion systems, their differences, and trade-offs
Experience performing ∆V budget development and propellant sizing
US Citizen with the ability to obtain a U.S. Government security clearance
Must be able to travel up to 20%

Job Responsibility

Serve as the Responsible Engineer for spacecraft propulsion subsystems across one or more spacecraft programs
Define propulsion subsystem requirements including thrust capability, delta-V budgets, propellant capacity, maneuver timelines, and mission lifetime margins
Perform system level trade studies, design optimization, and performance modeling, to evaluate propulsion technologies and supplier solutions aligned to mission needs
Lead propulsion supplier evaluation, selection, and technical oversight throughout the program lifecycle
Develop subsystem specifications, interface control documents (ICDs), and verification plans for propulsion systems
Coordinate closely with Mission Analysis and GNC teams to ensure maneuver planning and propulsion capabilities are aligned
Ensure propulsion subsystem interfaces with spacecraft avionics, power systems, structures, thermal and software are properly defined and integrated
Develop propulsion test plans and support or execute hot fire, pressure, and environmental tests
Support propulsion subsystem integration, system-level testing, and anomaly resolution during integration and test campaigns
Contribute to hazard analyses, fault management strategies, and safety of operations processes

What we offer

Highly competitive benefits package

Fulltime

Software Engineer - Propulsion Thermal Management

The successful candidates will join an Agile team of approximately 10 members, r...

Location

United States , Milford

Salary:

Not provided

General Motors

Expiration Date

Until further notice

Requirements

Bachelor’s degree in software, Computer Science, Electrical or Mechanical Engineering
2+ years of embedded software/controls development experience
Development / testing experience on SIL/HIL or other virtual environments
In depth knowledge of control algorithm / software development and diagnostic strategy for thermal management system
Skilled with software coding (C-language), Simulink/Stateflow, GIT environment(s), plant modeling, Python, C++
Ability to manage time and meet deliverable timing is critical
High analytical ability, effective communication, interpersonal, and leadership skills required to build relationships with local and global team members and customers to resolve issues

Job Responsibility

Design, develop and implement thermal management control and diagnostic algorithms for GM’s next generation of EV vehicles
Work closely with multi-disciplined engineering teams to interpret functional requirements to translate and implement appropriate control and diagnostic strategies
Create and integrate software in MATLAB Simulink models and hand-coded C
Create or modify Unit test cases and Multicomponent test cases to ensure thorough software testing
Explore and understand new thermal systems and requirements to enable controls and software development
Leverage GM’s virtual systems, benches, and vehicles to verify and validate systems behaviors and performance
Works cross-functionally with System Engineers, Software Engineers, Calibrators, Scrum Manager, Scrum Leader to ensure robust design
Participate in the Agile Team and Agile ceremonies as required
Develop innovative solutions using machine learning methods

What we offer

medical
dental
vision
Health Savings Account
Flexible Spending Accounts
retirement savings plan
sickness and accident benefits
life insurance
paid vacation & holidays
tuition assistance programs

Fulltime

Staff Condition Monitoring Engineer - Propulsion

As a Staff Condition Monitoring Engineer on our Electric Propulsion System team,...

Location

United States , San Jose

Salary:

152000.00 - 200000.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Bachelor's degree in Mechanical Engineering, Aerospace Engineering, Electrical Engineering, or related field
8+ years of professional engineering experience in vibration analysis, structural or rotating equipment health monitoring, or related fields
Experience with gearbox, turbine, or electric motor design, testing, or analysis for an automotive, aerospace, or defense application
Proficiency with data analysis tools and programming languages (Python, MATLAB, or similar)
Ability to build and maintain data analysis software tools while employing software development and version control (Git, Bitbucket, etc.) best practices
Expert understanding of vibration analysis and signal processing tools
Experience with health monitoring algorithms and predictive maintenance techniques
Knowledge of sensors, data acquisition systems, and instrumentation such as accelerometers, load cells, strain gauges, and oil debris sensors
Familiarity with gearbox systems and failure modes
Proven ability to organize and lead cross-functional technical initiatives

Job Responsibility

Review and analyze flight test data (vibration, thermal, structural) to support ongoing flight test campaigns
Build and maintain robust analysis tools for processing flight and dynamometer test data
Develop insights from complex datasets to inform design improvements and operational decisions
Own the development and implementation of onboard vibration and engine health monitoring algorithms
Design predictive maintenance algorithms to optimize system reliability and performance
Validate and refine monitoring systems throughout the design/development cycle
Lead by example, actively developing solutions alongside the team while providing technical oversight
Collaborate with cross-functional team members to develop health monitoring metrics and analytical tools
Work with systems, safety, and reliability teams to inform DFMEA and ensure requirements are properly validated and understood
Mentor and/or oversee junior engineers

Fulltime

Staff Electronics Engineer- Propulsion Controller

Archer is an aerospace company based in San Jose, California building an all-ele...

Location

United States , San Jose

Salary:

170800.00 - 225600.00 USD / Year

Archer Aviation

Expiration Date

Until further notice

Requirements

Electrical Engineering Degree or equivalent experience
8+ years experience in complex electronics and control system design
Proven expertise in architecting microcontroller-based control systems from concept to production
Deep knowledge of low-voltage power design, analog signal conditioning, and communication protocols including CAN and Ethernet
Experience designing fault-tolerant, redundant electronics for safety-critical applications
Strong understanding of PCBA design for EMC/EMI mitigation, signal integrity, and thermal management
Demonstrated technical leadership and ability to mentor engineering teams

Job Responsibility

Own the technical roadmap and architecture for engine and generator controller boards from concept through flight certification
Drive microcontroller selection, processing architecture, and memory management to meet real-time performance and safety requirements
Design low-voltage power distribution trees, precision analog signal conditioning circuits, and sensor interfaces for temperature, current, voltage, position, and vibration sensing in harsh environments
Architect and validate multi-protocol communication systems including CAN, Ethernet, SPI, I2C, and UART for integration with aircraft subsystems
Develop fault detection, isolation, and recovery logic in hardware to ensure fail-safe operation and meet functional safety requirements
Serve as technical authority for controller design, leading design reviews, mentoring engineers, and ensuring best practices for reliability and manufacturability
Collaborate with firmware, power electronics, mechanical, systems, and safety teams to integrate controllers into the propulsion system
Develop and execute validation plans using simulation and testing to meet performance, EMC, and certification requirements

Fulltime

Select Country

Propulsion Performance Engineer

Job Description

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?