CrawlJobs Logo
Airswift Sweden Logo Airswift Sweden · Energy

Project Quality Control Coordinator

Azerbaijan, Baku · Job Posted April 23, 2026
Apply Position
Job Link Share

Job Responsibility

  • Support the implementation of the Project Quality Management System (PQMS) activities within the project
  • Support Project Quality Manager in supervising the project Quality Control activities
  • Report to Project Quality Manager information and data about Project in line with Corporate and Offshore Division Guidelines
  • Act as focal point for quality control related matters within the project and in liaison with external entities
  • Verify the implementation of the inspection, control and test notification process
  • Support the Project Quality Manager in defining the Project Quality Control System and in identifying needed project quality control plans and QC procedures in accordance with the Company Quality Management System
  • Support the Project Quality Manager in planning and allocating QC functions to the project, ensure coordination of assigned personnel
  • Review Quality Control Plans, ensure that the tests, controls and inspections are carried out according to Quality Control Plans/Inspection Test Plans and that personnel have access to all required project documentation
  • Check procedures and equipment to be used in tests, controls and inspections and agrees on the applicable operating procedures with the organization in charge of the works
  • Review applicable QC procedures, including those relating to special processes
  • Check that material and equipment are correctly received, stored, identified, traceable preserved and handled (if needed)
  • Check the documents certifying the tests, controls and inspections carried out and ensure their orderly collection and management, mechanical completion included
  • Verify that the tests, controls and inspections are carried out by the Subcontractors
  • Verify the correct implementation and application of Quality Tools
  • Provide specialist support to the Project Quality Manager in interfacing with the Client and third parties
  • Ensure the correct application and, whenever necessary, the update of site Quality Control Plans/procedures
  • Ensure training of Site Personnel on QC topics
  • Verify proper Non Conformity detection and recording in D2 system, as well as relevant corrective actions implementation
  • Verify the preparation of the Quality section of the final dossier. In case of subcontracted activities, verify the QC section of the dossier is properly collected
  • Verify that inspection/control/test reports are verified, recorded, filed and traceable
  • Collect and analyze project QC data to be provided to Project Quality Manager, also in view of the Project Quality Management Review preparation
  • Support the Project Quality Manager in the management/implementation of lesson learned, Cost of Non-quality and Self Verifications processes
  • Reports Project QC information and data to Project Quality Manager by means of Corporate and Offshore Division methodologies and tools
  • Fully adhere, at all times and irrespective of the work place, to Company Health, Safety, Environmental and Quality (HSEQ) policies, procedures and requirements
  • Perform other related duties as assigned by Superior

Requirements

  • Higher education
  • Must have at least 3 years’ experience in a similar role in Oil & Gas industry
  • Welding qualification CSWIP 3.1 (preferred 3.2) or IWI B (Preferred IWI C)
  • Knowledge of ISO 9001 standards
  • Knowledge of advanced NDT technologies
  • Capability to check the calibration of NDT instruments and certification validity
  • Knowledge in Coating and Painting inspection (qualification BGAS Level 2 or equivalent is preferable)
  • Capability to plan, execute, report inspection and test according to Quality Control Plan

Nice to have

  • Welding qualification CSWIP 3.2
  • IWI C
  • Coating and Painting inspection qualification BGAS Level 2
Airswift Sweden - All Job Offers

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Suggested Tags: Frontend Developer Secretary Talent Manager Salesforce Administrator Data Analyst
Similar Jobs for

Project Quality Control Coordinator

8 matching positions

Coordinator Quality Assurance & Control

Under the direction of the Laboratory Director and in collaboration with the Lab...
Location
Location
United States , Tucson
Salary
Salary:
Not provided
tmcaz.com Logo
Tucson Medical Center
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in Medical Laboratory Science or equivalent
  • Minimum of 5 years experience in a Clinical Laboratory
  • Must be able to train others to use CQI and related SPC tools
  • Medical Technologist (ASCP) Certification or equivalent
  • Knowledge of quality control test measurements and regulations regarding analyzing specimens
  • Skill in evaluating tests and identifying measures outside the norm, and whether any follow up testing might be required
  • Demonstrates effective computer skills including programs such as Microsoft Office Suite, email, PDF, and internet searches
  • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
  • Ability to complete routine reports and correspondence
  • Ability to listen and accurately interpret others’ communication or instructions to take appropriate action
Job Responsibility
Job Responsibility
  • Supports quality improvement initiatives through team participation, data collection, process change implementations, and other activities
  • Ensures Quality Assurance Quality Control Program fulfills all accreditation and regulatory requirements of local, state and federal agencies and affiliates (e.g., CAP, JCAHO, CLIA, FDA, OSHA, AABB, etc.)
  • Provides and communicates current regulatory guidelines, legislative changes and accreditation criteria to laboratory management team, all sections of the laboratory and Respiratory Therapy
  • Works with Directors, management team, and quality improvement teams, to coordinate and establish annual quality assurance calendar
  • Assures all quality improvement and monitoring activities are completed in a timely manner
  • Develops and proposes, in collaboration with the management team, appropriate improvement projects utilizing statistical process controls, including but not limited to: measurement of customer satisfaction and perception of quality, measurement of cost effectiveness and productivity, and reduction/elimination of non-quality improvement processes and unnecessary redundancies
  • Facilitates the CQI (Continuous Quality Improvement) and SPC (Statistical Process Control), process in each section of the laboratory
  • Works with appropriate staff to identify key indicators of service, establish methods for monitoring performance, and to initiate improvement activities
  • Facilitates the implementation of processes to assure the best quality outcome is delivered to customers/clients in a customer-focused manner
  • Provides support to the technical and non-technical managers to target, measure, and report quality improvement opportunities
  • Fulltime
Read More
Arrow Right

Project Coordinator, Project Planning

We are seeking a highly motivated and meticulous Project coordinator. The ideal ...
Location
Location
India , Gurugram
Salary
Salary:
Not provided
jll.com Logo
JLL
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • 1-3 years of Experience in Construction field - Project management / Construction management professional or related role
  • A relevant education background - Degree in Architecture
  • Post-graduation in Construction management / Project management or equivalent, will be preferred
  • Sound knowledge and understanding of audit, construction contracts and local statutory regulations & laws, quantity surveying, cost management
  • Familiarity with construction best practices
  • quality assurance and quality control procedures
  • Proficiency in project management software and other related tools (Ex. Primavera
  • Microsoft Project, Word, Excel, PowerPoint, SharePoint, Smart Sheet
  • BI
  • BIM software
Job Responsibility
Job Responsibility
  • Plan, coordinate, and review various projects
  • Comprehend quality assurance systems and SOP/Operations manual requirements
  • Utilize project management software and tools to review projects
  • Check project process compliance and adherence to the SOP
  • Verify contract compliance and scope of work adherence
  • Review project reports, including status updates and risk assessments
  • Check project progress and performance against approved baselines (Schedule, Budget etc.,)
  • Identify and report on project variances, risks, and potential issues
  • Evaluate quality assurance and management systems implemented in projects
  • Verify drawings (Ex. GFC / shop drawings / as built drawings etc.,), specifications and BOQ and approvals
  • Fulltime
Read More
Arrow Right

Quality Assurance Quality Control Engineer

Location
Location
Germany , Dresden
Salary
Salary:
Not provided
asafeglobal.com Logo
ASafe Global
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Degree or diploma in Civil, Mechanical, Electrical Engineering or a related field
  • 5+ years of relevant QA/QC experience, preferably in semiconductor, cleanroom, or high-tech industrial construction
  • Solid understanding of ISO standards, quality control processes, and construction QA/QC documentation
  • Strong experience with inspection test plans (ITPs), material verification, and construction methodology
  • Familiarity with EU and German quality standards and construction regulations
  • Excellent communication skills and ability to liaise with multidisciplinary teams
  • Fluent in English
  • Ability to work on-site in Dresden, Germany for the duration of the project
  • A valid Visa/Work permit for the specific job location is essential
Job Responsibility
Job Responsibility
  • Oversee and implement the quality control procedures for the construction project, ensuring compliance with all codes, standards, and client specifications
  • Conduct inspections, audits, and testing across all stages of construction activities
  • Review and approve material submittals, method statements, and test plans in coordination with engineering and project teams
  • Track and document all QA/QC activities and maintain inspection test records
  • Identify non-conformances, ensure timely corrective actions, and lead root cause analyses
  • Coordinate with subcontractors and vendors to verify quality compliance throughout the supply and installation phases
  • Participate in progress meetings and provide regular reporting on QA/QC metrics to the management team
  • Support project close-out through the preparation of handover documentation and as-built records
What we offer
What we offer
  • Valuing Our Team: At ASafe Global, we recognize that our employees are our greatest asset, and we are dedicated to fostering a supportive and rewarding work environment
  • Competitive Compensation: We provide a competitive compensation package, ensuring that our employees are fairly rewarded for their contributions
  • Growth Opportunities: ASafe Global offers a range of professional development opportunities to support the continuous growth and advancement of our team members
  • Employee Success: We believe in the interconnectedness of our company’s success and the well-being of our employees, emphasizing a mutually beneficial relationship
  • Meaningful Impact: Play a key role in shaping the future of construction and innovation
  • Inclusive Workplace: Join a diverse and supportive team committed to forward-thinking solutions
Read More
Arrow Right

Deputy Director of Quality Assurance and Quality Control

This position provides a high level of responsible, complex management and polic...
Location
Location
United States , Honolulu
Salary
Salary:
120900.00 - 193490.00 USD / Year
honolulutransit.org Logo
Honolulu
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • A combination of education and experience substantially equivalent to graduation from an accredited college or university with major work in quality management, business administration, engineering, or a related field
  • five years of progressive experience in quality assurance, quality control, or related administrative or analytical field
  • experience must include active involvement in developing, implementing, improving QA/QC processes or programs, with demonstrated ability to analyze operations and develop effective solutions
  • a minimum of two years experience in a governmental agency or regulated industry, including experience supervising or managing QA/QC activities or teams
  • candidate must meet the health and physical condition standards necessary and proper for performing the essential duties
Job Responsibility
Job Responsibility
  • Assist, establish, implement, and maintain an effective Quality Management Plan for HART, including methods to investigate, monitor, regulate, and enforce quality standards
  • establish coordination of functions and operations across departments through the development and clear definition of quality assurance procedures
  • ensure HART’s compliance with applicable laws, regulations, rules, and generally accepted industry practices
  • provide additional oversight for the planning, analysis, inspection, design, testing, and/or integration of products and/or components to ensure compliance with HART’s quality assurance program
  • contribute to the development of contractor and quality specifications for design, procurement, and construction contracts
  • oversee internal and external audit, surveillance, and monitoring programs, ensuring compliance with HART's requirements
  • holds the delegated responsibility for ensuring that internal and external audits are scheduled, performed, and followed up
  • review HART’s activities, including contract work performed
  • help to identify and evaluate quality issues or work deficiencies, and initiate, recommend, or implement solutions and procedural changes as needed
  • guide and direct other quality assurance functions, including the conduct of quality engineering reviews of design plans, specifications, procedures, contracts, and request for proposals, for completeness and quality requirements
What we offer
What we offer
  • Medical, prescription drug, vision, dental, and life insurance plans
  • generous vacation and sick leave, earning up to 21 days per year
  • 13 paid holidays annually (14 days during election year)
  • retirement plan contributions through the Employees' Retirement System (ERS)
  • deferred compensation options to invest pre-tax income for retirement
  • flexible spending accounts for health and dependent care expenses
  • pre-tax transportation benefits, including TheBus and vanpool options
  • access to confidential counseling services through the Employee Assistance Program (EAP)
  • additional perks include training opportunities and employer-funded Holo Card for eligible employees to use on public transit
  • eligibility for Public Service Loan Forgiveness (PSLF) program, supporting employees dedicated to public service
  • Fulltime
Read More
Arrow Right

Quality Control Technician

Support the Manufacturing, Materials Group and Quality department as required in...
Location
Location
Canada , Mississauga
Salary
Salary:
24.00 - 26.00 CAD / Hour
profoundmedical.com Logo
Profound Medical
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • College or University Degree or at least 3 years of experience with inspecting parts using measurement equipment in an ISO 9001 environment
  • Exposure to ISO 9001 quality system minimum
  • Preferred, exposure to ISO 13485 standard
  • Ability to read and understand part drawings and written specifications
  • Ability to interpret technical drawings, dimensions, tolerances, etc
  • Ability to interpret circuit schematics
  • Employs a results-oriented work style and teamwork-oriented approach to meeting objectives
  • Demonstrates the ability to prioritize duties, multi-task, and quickly assume new tasks to function productively in a fast-paced environment
  • Proven ability to establish working relationships with design engineers, sustaining engineers, manufacturing engineers, production technicians, procurement team, QC personnel, and QA personnel
  • Strong communication skills, written and oral
Job Responsibility
Job Responsibility
  • Contribute to a positive, high-performance team environment
  • Provide support to manufacturing and purchasing through inspection and auditing of incoming material for conformance to product specification, purchasing specifications, as well as Food and Drug Administration to GMPs and ISO 13485
  • Performs timely First Article Inspections, and Incoming Inspections using mechanical and measuring equipment to ensure conformance to part/product specifications and requirements
  • Maintain control of equipment requiring calibration and preventative maintenance
  • Coordinate calibration of equipment with manufacturing engineers and procurement team
  • Coordinate preventative maintenance work with manufacturing engineers
  • Maintain control of materials used in manufacturing
  • Prepare and review shipment of product to sterilization
  • Actively supports quality control and continuous improvement through participation in engineering changes and other improvement programs
  • Will also assist in supplier evaluation through data collection of inspection results
What we offer
What we offer
  • group RRSP
  • medical benefits paid by the employer
  • Fulltime
Read More
Arrow Right

Sub-Fabrication Project Coordinator

The Sub-Fabrication Project Coordinator serves as an extension of the Project Ma...
Location
Location
United States , Little Rock
Salary
Salary:
Not provided
lexicon-inc.com Logo
Lexicon, Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor’s degree in Construction Management, Engineering, or related field (or equivalent experience)
  • 3-6 years of related experience in the structural steel and/or general construction industry
  • General knowledge of construction methods, processes, scheduling and coordination
  • Ability to read and interpret submittals and shop drawings
  • Excellent communication, negotiation, and relationship-building skills
  • Proficiency in Microsoft Office Suite
Job Responsibility
Job Responsibility
  • Interfaces with Project Manager and necessary departments to assist in the scheduling of work and materials to and from sub-fabricators
  • Coordinates shipping schedules and load arrangements between sub-fabricator and jobsite or Prospect Steel facilities
  • Provides input and direction to aid in the preparation and maintenance of all sub-fabrication backlogs and schedules
  • Acts as the conduit for information flowing between the Project Manager and the sub-fabricators while working closely with the Purchasing and Production Control departments
  • Tracks, understands and reports on sub-fabricator’s adherence to the project schedule
  • Works with Project Team and Quality Assurance department to expedite corrective action resolutions for non-conforming items
  • Ensures that the proper drawings are being utilized in the sub-fabricator’s plant
  • Works closely with Project Team on efficiently incorporating changes to the sub-fabricator’s scope of work to minimize cost and schedule impacts
  • Reports status of materials, fabrication and any variation in scheduled activities
  • Assists in activities required to close out sub-fabricator contracts on a project
What we offer
What we offer
  • Health Insurance
  • HSA with Employer contributions
  • Dental Insurance
  • Vision Insurance
  • Life Insurance
  • Disability Income Benefits
  • Paid Holidays
  • Paid Vacation
  • 401 (k)
  • ESOP
  • Fulltime
Read More
Arrow Right
New

Documentation Project Coordinator

We are recruiting on behalf of one of our clients for a Documentation Project Co...
Location
Location
United Kingdom , Bridgwater
Salary
Salary:
138.00 GBP / Day
rullion.co.uk Logo
Rullion
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Highly organised individual with excellent attention to detail
  • Strong communication and stakeholder management skills
  • Ability to manage multiple priorities and work to deadlines
  • Experience working within project, engineering, construction, infrastructure, energy, defence, or other regulated environments
  • Strong administrative and coordination skills
  • Proactive approach to problem solving and continuous improvement
  • Ability to work both independently and collaboratively within project teams
  • Competent user of Microsoft Office applications, particularly Excel, Word, and Outlook
  • Previous experience in document control, project coordination, project administration, records management, or a similar support role
  • Experience managing controlled documentation within a project environment
Job Responsibility
Job Responsibility
  • Coordinate and manage project documentation throughout its lifecycle
  • Maintain document registers, trackers, and document management systems
  • Ensure documents are correctly formatted, version controlled, approved, and distributed
  • Monitor documentation deliverables and support project milestones
  • Liaise with project managers, engineers, suppliers, and stakeholders to obtain and track required documentation
  • Support the preparation and submission of technical and project documentation
  • Maintain accurate records and ensure compliance with company procedures and quality standards
  • Manage document review and approval workflows
  • Support internal and external audits by providing document and records evidence
  • Prepare reports on document status, progress, and key performance indicators
  • Fulltime
Read More
Arrow Right

Sr. Manager Quality Control - Chemistry

At Amgen, if you feel like you’re part of something bigger, it’s because you are...
Location
Location
United States , Holly Springs
Salary
Salary:
142103.85 - 192258.15 USD / Year
amgen.com Logo
Amgen
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High school diploma / GED and 12 years of Aseptic Manufacturing experience OR Associate’s degree and 10 years of Aseptic Manufacturing experience OR Bachelor’s degree and 8 years of Aseptic Manufacturing experience OR Master’s degree and 6 years of Aseptic Manufacturing experience OR Doctorate degree and 2 years of Aseptic Manufacturing experience
  • In addition to meeting at least one of the above requirements, you must have a minimum of 2 years experience directly managing people and/or leadership experience leading teams, projects, programs, or directing the allocation or resources.
Job Responsibility
Job Responsibility
  • Lead teams responsible for the QC Chemistry laboratory and 1st and 2nd shift Quality Control operations
  • Include the startup and validation of laboratory equipment, transfer and implementation of analytical methods, and development of a diverse team to support site startup and successfully transition into steady-state commercial operations at Amgen North Carolina
  • Overall responsibility for startup, operational readiness, and day-to-day management of the QC Chemistry laboratory and oversight of 1st and 2nd shift QC teams, including successfully transitioning the organization from site startup activities into routine commercial operations
  • Lead QC Chemistry functions supporting analytical method families including chromatography (HPLC/UPLC), capillary electrophoresis (CE), gel-based methods, and general compendial chemistry testing
  • Manage 1st and 2nd shift managers 7 days a week for cross functional night shift support for manufacturing
  • Ensure laboratory and shift operations are conducted in compliance with safety guidelines, cGLPs, cGMPs, and other applicable regulatory requirements
  • Build, lead, coach, and develop a high-performing organization capable of supporting both startup execution and long-term commercial manufacturing operations
  • Implement effective digital tools for leading the organization
  • Partner cross-functionally with Manufacturing, Process Development, Quality Assurance, Facilities & Engineering, Supply Chain, and other site functions to support startup readiness, process performance, and ongoing manufacturing operations
  • Participate in regulatory agency inspections and support site licensure and inspection readiness activities
What we offer
What we offer
  • A comprehensive employee benefits package, including a Retirement and Savings Plan with generous company contributions, group medical, dental and vision coverage, life and disability insurance, and flexible spending accounts
  • A discretionary annual bonus program, or for field sales representatives, a sales-based incentive plan
  • Stock-based long-term incentives
  • Award-winning time-off plans
  • Flexible work models where possible
  • Fulltime
Read More
Arrow Right