Project Engineer Robotics Job at EBZ Gruppe (Calla)

Project Engineer - Controls & Robotics

Orise (PA Solutions, an ATS Company) delivers complex, turnkey automation system...

Location

United States , Warren

Salary:

Not provided

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, Mechatronics, Computer Engineering, or equivalent experience
3–5 years of PLC/HMI programming experience in a machine-build or automation project environment
Automotive or aerospace automation experience
Hands-on robot programming experience (Fanuc, ABB, or KUKA)
Ability to read and interpret electrical schematics, device datasheets, and safety circuits
Experience with industrial networks, remote IO, VFDs, sensors, and servo systems
Strong debugging and problem-solving background during build/commissioning
Experience with vision systems (Cognex, Keyence) or advanced motion control

Job Responsibility

Oversee development and implement PLC programs (Siemens TIA Portal, Rockwell Studio 5000, etc.) including HMI screens, alarms, diagnostics, and safety logic
Oversee program and integrate industrial robots (Fanuc, ABB, KUKA) including EOAT configuration, frames, paths, routines, payloads, and fault recovery sequences
Oversee configuration and diagnose industrial networks (Ethernet/IP, Profinet, OPC-UA, IO-Link)
Support electrical design reviews (control architecture, IO counts, panel layouts, device selection)
Validate IO, tune motion, perform device bring-up, and troubleshoot servo, vision, sensor, and safety hardware
Participate in system design reviews, PFMEAs, functional specifications, and sequence of operations creation
Breakdown controls tasks and provide hour estimates, assumptions, and risk identification
Support project managers with technical content for customer meetings, timelines, and issue logs
Identify scope gaps, flag change order opportunities, and ensure alignment with customer standards
Lead bench test, debug, and commissioning activities for your assigned zones or stations

What we offer

Comprehensive Medical, Dental & Vision Plans
401(k) with company match
Employee Stock Purchase Plan
Paid Vacation

Fulltime

Senior Software Engineer, Robotics Platform

Chef is looking for a Senior Software Engineer, Robotics Platform, to help us sc...

Location

United States , San Francisco

Salary:

150000.00 - 250000.00 USD / Year

Chef Robotics

Expiration Date

Until further notice

Requirements

BS in computer science, robotics, or equivalent experience
Strong experience and expertise in Linux systems, with at least 4+ years experience building complex software in a Linux environment
Excellent software engineering fundamentals
Experience leading and shipping complex software projects
Understanding of network and time protocols, e.g. TCP, UDP, PTP
Knowledge of build systems and tooling, performance optimization, and memory and network profiling

Job Responsibility

Debug and fix difficult low-level systems software problems, e.g. with drivers, networking, Linux configuration
Lead an upgrade of our autonomy software OS and middleware
Investigate load and networking issues and increase performance of our perception and robotics algorithms
Work with manufacturing to develop processes for provisioning robotic systems at scale
Help integrate new robot hardware, sensors, and cameras, and monitor performance
Contribute to overall software architecture design and standards and test and release processes
Champion engineering excellence, ensuring high-quality, well-structured, and well-tested code

What we offer

medical, dental, and vision insurance
commuter benefits
flexible paid time off (PTO)
catered lunch
401(k) matching

Fulltime

Robotics Deployment Project Manager

The Deployment Team is responsible for managing the deployment of robotics-centr...

Location

United States , Chicago

Salary:

115000.00 - 140000.00 USD / Year

Formic

Expiration Date

Until further notice

Requirements

5+ years of project management experience in technically complex manufacturing environments
3+ years of prior automation/robotics experience
Experience working with industrial robots and/or cobots including Fanuc, Kuka, Yaskawa, ABB, or Universal Robots
Experience working with or for an industrial robotics System Integrator
Strong communication skills (both written and spoken) and ability to influence
Ability to skillfully manage a diverse set of team members and stakeholders
Hunger to learn, grow, and make an impact in a fast-paced environment
Action-oriented with strong problem-solving skills
Willingness to travel up to 35-40% of time in this position
Valid driver's license and a reliable vehicle for any local travel, as needed

Job Responsibility

Strategically plan and manage robotics-centric automation solutions for a variety of different clients and applications, overseeing all aspects of deployment
Support defining project scopes, gathering project requirements, and validating proposals in cooperation with Formic Applications/Solutions Engineers and third party robotics system integrators
Develop and track project plans and monitor progress to ensure deadlines, standards, and cost targets are met
Facilitate the resolution of issues that surface in the deployment process
Play an active role in building, standardizing, and refining our internal processes and operations

What we offer

Equity in Formic
99% covered Medical, Dental, and Vision insurance plans, with 75% coverage for dependents
Additional Fully Covered Insurance Benefits: FSA & DCFSA, Life Insurance, Short-Term Disability, and Long-Term Disability
Employee Assistance Program (EAP)
Paid Parental Leave
Company-sponsored 401(k)
Home Office Stipend
Monthly Cell-Phone Reimbursement
Flexible Time-Off
Paid Company Holidays

Fulltime

Robotic Process Engineer

At Machina Labs, we’re reshaping manufacturing through advanced robotics and mac...

Location

United States , Chatsworth

Salary:

100000.00 - 130000.00 USD / Year

Machina Labs

Expiration Date

Until further notice

Requirements

B.S. in Mechanical, Manufacturing, Industrial, or Aerospace Engineering, or related field
Minimum 2 years of experience (or fewer with advanced degrees) in a manufacturing, robotics, or prototyping environment
Proficiency in CAD software (e.g., SolidWorks, Fusion 360, Rhino)
Familiarity with CAM, tool path generation, or robot programming
Strong data analysis skills (e.g. MATLAB, Python, advanced Excel or similar tools)
Comfort working in open-ended problem spaces, making rapid decisions and course corrections as needed
Strong attention to detail and ability to follow standard processes
Comfortable working in a hands-on, fast-paced manufacturing environment
Demonstrated ability to interface with interdisciplinary teams and internal/external project stakeholders
Effective written and verbal communication skills

Job Responsibility

Generate and modify CAD models to ensure compatibility for RoboForming
Use internal software stack to convert CAD into robot tool paths for execution on the RoboCraftsman
Analyze RoboForming data and 3D scan results to assess part quality and identify areas for improvements
Design and execute structured experiments (DOE) to optimize forming parameters and tool path strategies
Collaborate with product managers, software engineers, and manufacturing engineers to improve workflows and tool path strategies
Contribute to technical discussions with external customers as needed to support project goals and ensure alignment
Work autonomously and making informed decisions with limited data, then refining based on outcomes
Document process, results, and analyses for continuous improvement for internal use

What we offer

Medical
Dental
Vision
PTO
Stock Options

Fulltime

Robotics Engineer, Intern

At Machina Labs, we’re reshaping manufacturing through advanced robotics and mac...

Location

United States , Chatsworth

Salary:

20.00 - 35.00 USD / Hour

Machina Labs

Expiration Date

Until further notice

Requirements

Experience in Robotics, Controls and Motion Planning, Simulation, and Sensor Integration
Experience in statistical method for model complex systems (Machine Learning)
Experience developing real-time software and familiarity with software development design paradigms such as OO, functional, etc.
Solid understanding of robot Kinematics and Dynamics
Experience with Robotic Software Frameworks such as ROS
Experience with software development lifecycle in a team (code reviews, version control, tests)
Understanding of manufacturing processes and process instrumentation
Bachelor’s degree or equivalent experience in Electrical Engineering, Mechanical Engineering, Computer Engineering or related engineering fields

Job Responsibility

Identify project priorities, software/hardware requirements and design constraints with team members across multiple disciplines and translate those into minimum viable systems
Take part in design review meetings and provide feedback to team
Design software for path planning and control of robotic end-effectors
Operate robots using your software and enable other team members to efficiently interface with the robots to test and implement new features
Design, implement, and integrate sensors and supporting software / firmware
Rapidly develop prototypes to verify design concepts and constraints, and balance design efforts with short- and long-term objectives
Take part in the software development effort and take charge of the full software development lifecycle

Fulltime

Senior Robotics Software Engineer, Manipulation

As a Senior Robotics Software Engineer, Manipulation at Chef Robotics, you'll le...

Location

United States , San Francisco

Salary:

150000.00 - 260000.00 USD / Year

Chef Robotics

Expiration Date

Until further notice

Requirements

BS, MS, or PhD in Computer Science, Robotics, Electrical Engineering, Mechanical Engineering, or related field
7+ years of professional experience in robotics software development with focus on manipulation
Expert-level proficiency in Python and/or C++ with strong software engineering fundamentals
Deep understanding of both classical and machine/reinforcement learning approaches to robot manipulation
Extensive experience with robotic waypoint generation, path planning, and trajectory optimization
Proven experience leading and shipping complex robotics software projects
Strong background with common deep learning frameworks (TensorFlow, PyTorch)
Advanced knowledge of manipulation algorithms including grasping, placement, and dexterous manipulation
Experience with force control, impedance control, and compliant manipulation strategies
Understanding of contact dynamics and physics-based manipulation modeling

Job Responsibility

Lead the development of classical and ML/RL-based motion planning and manipulation algorithms that work reliably across thousands of different foods with varying physical properties (stickiness, density, viscosity, texture)
Design and implement novel algorithms to learn ingredient properties on-the-fly and intelligently adapt manipulation parameters in real-time
Develop robust manipulation strategies that can handle edge cases and unexpected ingredient behaviors
Incorporate new sensor data including force control, tactile feedback, and vision systems for enhanced manipulation precision
Develop sensor fusion algorithms that combine multiple data sources for improved manipulation decision-making
Implement real-time feedback loops that adjust manipulation parameters based on sensor input
Design calibration systems for accurate sensor-based manipulation control
Create diagnostic systems to monitor and validate sensor performance during manipulation tasks
Analyze manipulation performance across different ingredients and environmental conditions
Optimize manipulation trajectories and control parameters for maximum throughput while maintaining quality

What we offer

medical, dental, and vision insurance
commuter benefits
flexible paid time off (PTO)
catered lunch
401(k) matching
early-stage equity

Fulltime

Senior Robotics Software Engineer, Planning and Control

As a Senior Robotics Software Engineer, Planning and Control at Chef Robotics, y...

Location

United States , San Francisco

Salary:

150000.00 - 260000.00 USD / Year

Chef Robotics

Expiration Date

Until further notice

Requirements

BS, MS, or PhD in Computer Science, Robotics, Electrical Engineering, Mechanical Engineering, or related field
7+ years of professional experience in robotics software development with focus on planning and control
Expert-level proficiency in Python and/or C++ with strong software engineering fundamentals
Deep understanding of motion planning algorithms including sampling-based, optimization-based, and learning-based approaches
Extensive experience with trajectory optimization, path planning, and trajectory smoothing techniques
Proven experience leading and shipping complex robotics planning and control projects
Strong background with real-time control systems and feedback control design
Advanced knowledge of robotic motion planning including RRT, PRM, and optimization-based planning methods
Experience with trajectory optimization techniques and numerical optimization methods
Understanding of control theory including PID, model predictive control, and adaptive control strategies

Job Responsibility

Lead the development of classical and learning-based motion planning algorithms for complex food preparation workflows
Design and implement trajectory optimization systems that balance speed, safety, and precision across multi-step recipes
Develop robust path planning algorithms that handle dynamic obstacles and changing kitchen environments
Create adaptive planning systems that can replan in real-time based on changing conditions or recipe modifications
Implement global and local planning strategies for efficient task sequencing and execution
Design and implement advanced control algorithms for precise robot motion during food preparation tasks
Develop real-time control systems that ensure smooth trajectory execution with appropriate safety constraints
Create feedback control loops that adapt to unexpected situations and maintain system stability
Implement model predictive control and other advanced control techniques for optimal performance
Design fail-safe mechanisms and emergency stop procedures for safe operation in commercial environments

What we offer

Medical, dental, and vision insurance
Commuter benefits
Flexible paid time off (PTO)
Catered lunch
401(k) matching
Early-stage equity

Fulltime

Robotics Software Engineer

As a Robotics Software Engineer at Chef Robotics, you’ll help shape the future o...

Location

United States , San Francisco

Salary:

170000.00 - 260000.00 USD / Year

Chef Robotics

Expiration Date

Until further notice

Requirements

BS, MS, or PhD in computer science, robotics, electrical engineering, mechanical engineering, or related field
5+ years of experience in Python and/or C++
Experience leading and shipping complex software projects
Understanding both classical and machine/reinforcement learning approaches to robot manipulation, and the tradeoffs between various techniques
Experience with robotic waypoint generation, path planning, and trajectory smoothing
Experience with common deep learning frameworks like Tensorflow or Pytorch
Excellent software engineering fundamentals
Excellent mathematical skills, especially with geometry, probability and statistics, linear algebra, and machine learning

Job Responsibility

Develop classical or ML/RL-based motion planning and manipulation algorithms that work across thousands of different foods with varying physical properties (stickiness, density, viscosity, etc.)
Develop novel algorithms to learn ingredient properties on-the-fly and intelligently adapt manipulation parameters
Incorporate new sensor data (e.g., force control, cameras) for trajectory optimization and metrics to measure ingredient manipulation performance
Analyze manipulation performance across ingredients and optimize trajectories for throughput
Contribute to overall software architecture design and standards, including designing interfaces between subsystems
Champion engineering excellence, ensuring high-quality, well-structured, and well-tested code
Stay up-to-date with the latest robotics research and apply insights in a practical way to our system

What we offer

medical, dental, and vision insurance
commuter benefits
flexible paid time off (PTO)
catered lunch
401(k) matching
early-stage equity

Fulltime

Project Engineer Robotics

EBZ Gruppe

Location:
United States , Calla

Category:
IT - Software Development

Contract Type:
Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:
January 02, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Project Engineer Robotics

Project Engineer - Controls & Robotics

Senior Software Engineer, Robotics Platform

Robotics Deployment Project Manager

Robotic Process Engineer

Robotics Engineer, Intern

Senior Robotics Software Engineer, Manipulation

Senior Robotics Software Engineer, Planning and Control

Robotics Software Engineer

Project Engineer Robotics

EBZ Gruppe

Location:United States , Calla

Category:IT - Software Development

Contract Type:Not provided

Salary:

Job Description:

Job Responsibility:

Requirements:

Nice to have:

Additional Information:

Job Posted:January 02, 2026

Looking for more opportunities? Search for other job offers that match your skills and interests.

Similar Jobs for Project Engineer Robotics

Project Engineer - Controls & Robotics

Senior Software Engineer, Robotics Platform

Robotics Deployment Project Manager

Robotic Process Engineer

Robotics Engineer, Intern

Senior Robotics Software Engineer, Manipulation

Senior Robotics Software Engineer, Planning and Control

Robotics Software Engineer

Location:
United States , Calla

Category:
IT - Software Development

Contract Type:
Not provided

Job Posted:
January 02, 2026