Project Engineer – Automation and Control Job at Randstad (Knowlton)

Project Engineer - Controls & Robotics

Orise (PA Solutions, an ATS Company) delivers complex, turnkey automation system...

Location

United States , Warren

Salary:

Not provided

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

Bachelor’s degree in Electrical Engineering, Mechatronics, Computer Engineering, or equivalent experience
3–5 years of PLC/HMI programming experience in a machine-build or automation project environment
Automotive or aerospace automation experience
Hands-on robot programming experience (Fanuc, ABB, or KUKA)
Ability to read and interpret electrical schematics, device datasheets, and safety circuits
Experience with industrial networks, remote IO, VFDs, sensors, and servo systems
Strong debugging and problem-solving background during build/commissioning
Experience with vision systems (Cognex, Keyence) or advanced motion control

Job Responsibility

Oversee development and implement PLC programs (Siemens TIA Portal, Rockwell Studio 5000, etc.) including HMI screens, alarms, diagnostics, and safety logic
Oversee program and integrate industrial robots (Fanuc, ABB, KUKA) including EOAT configuration, frames, paths, routines, payloads, and fault recovery sequences
Oversee configuration and diagnose industrial networks (Ethernet/IP, Profinet, OPC-UA, IO-Link)
Support electrical design reviews (control architecture, IO counts, panel layouts, device selection)
Validate IO, tune motion, perform device bring-up, and troubleshoot servo, vision, sensor, and safety hardware
Participate in system design reviews, PFMEAs, functional specifications, and sequence of operations creation
Breakdown controls tasks and provide hour estimates, assumptions, and risk identification
Support project managers with technical content for customer meetings, timelines, and issue logs
Identify scope gaps, flag change order opportunities, and ensure alignment with customer standards
Lead bench test, debug, and commissioning activities for your assigned zones or stations

What we offer

Comprehensive Medical, Dental & Vision Plans
401(k) with company match
Employee Stock Purchase Plan
Paid Vacation

Fulltime

Electrical Engineer – Process Automation and Electrical Engineering

Electrical engineer is responsible for activities related to its discipline with...

Location

Italy , Milan

Salary:

Not provided

EUROTECNICA Contractors and Engineers S.p.A.

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in electrical engineering
Minimum +2/3 years of work experience in engineering design in Oil & Gas or Power sectors is preferred
Proactivity, sense of initiative, ability to work independently and in a team
Fluent in Italian and English (written and spoken)
Availability to short and long term national and international business trips

Job Responsibility

Develop the discipline deliverables such as: Single Line Diagrams
Load schedule/ Plant load balance
Network studies and calculations (Load flow, short circuit, stability, protection settings, harmonics, etc.)
Electrical equipment specifications for MV and LV equipment such as Motor Control Centers, switchgears, metering panels, transformers, UPSes, VFDs, motors, heaters, etc.
Earthing, lighting, tracing systems
CCTV, Public Address systems
Electrical cables routing, power distribution
Electrical layout drawings
Field installation details
Field equipment and accessories MTO

Fulltime

Boiler Controls Engineer

We offer an exceptional career opportunity with significant growth potential for...

Location

United States , Solon

Salary:

100000.00 - 140000.00 USD / Year

Revel Staffing

Expiration Date

Until further notice

Requirements

Minimum of 5 years of experience in Boiler Control System Engineering
B.S. in Engineering or equivalent experience
Expertise in implementing boiler control systems (BMS & Combustion Control) using PLC or DCS platforms
Proven experience in commissioning, startup, and tuning of boiler control systems
Self-motivated with the ability to manage multiple projects independently
Strong teamwork and communication skills

Job Responsibility

Lead multiple boiler control system projects, primarily utilizing Rockwell Automation control platforms
Analyze customer requirements to develop system architecture, control strategies, and network design
Oversee the hardware design for control system cabinets and panels
Develop PLC and HMI application programs
Lead integrated system testing and Factory Acceptance Test (FAT) activities
Serve as the main technical contact for clients and foster long-term customer relationships
Ensure system hardware and software meet customer specifications and comply with NFPA 85 and other industry standards
Conduct site visits for project meetings and system commissioning

Fulltime

Service Controls Engineer

The Service Controls Engineer III conceptualizes, develops and programs retrofit...

Location

United States , Rolling Meadows; Chicago

Salary:

95000.00 - 115000.00 USD / Year

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

Bachelors in electrical engineering, engineering related field or equivalent experience
Six (6) + years of automation experience
Proficiency in Allen Bradley programmable logic controller’s (PLC), human-machine interface’s (HMI), servo control, and electrical design
Computers, including programs such as Eplan, AutoCAD, Solid Works, Microsoft Office suite, etc.
Inspection and measuring tools such as scales, calipers, micrometers, multi-meters, dB meters, etc.

Job Responsibility

Lead the development of controls architecture system retrofits and optimize performance expectations
Program control systems for cam, servo, and air operated stations, along with test and electrical devices
Ensure the electrical design is functional, robust, and cost effective
Innovate and use good judgment to incorporate ATS Life Sciences Chicago standards and regulatory requirements
Research and specify appropriate purchased and preferred components
Create electrical wiring schematics, flow diagrams, panel layouts, bill of materials (BOM), organize release packages, and update schematics
Participate in internal and customer design reviews, installations, and service calls when needed
Provide estimates for controls engineering hours to design retrofits and upgrades on existing machines according to a customer and internal specification
Guide Electricians in wiring and codes
Support software validation requirements

What we offer

compensation for hours worked over 45
paid time off (PTO)
employee incentive bonus program
comprehensive benefits (including health, dental vision and employee assistance program)
wellness reimbursement
tuition reimbursement
annual paid volunteer day off
401K with employer match
optional employee share purchase program

Fulltime

Senior Vice President - Control Automation Lead

The AIM COO Control Automation Engagement Lead will provide strategic leadership...

Location

India , Haryana

Salary:

Not provided

Citi

Expiration Date

Until further notice

Requirements

Master's degree in Information Technology, Information Systems, Computer Applications, Engineering, or a related quantitative field from a premier institution
15+ years of progressive experience in technology, automation, or risk & control domains, with at least 8-10 years in a senior leadership role managing large, complex offshore engagements or global programs
Experience in a global financial services organization in the Risk & Control areas
Proven track record of successfully delivering large-scale automation initiatives with significant business impact
Extensive experience with modern control automation tools and platforms (e.g., Appian, Xceptor, Tableau, UiPath, Automation Anywhere)
Deep understanding of banking products, financial regulations, risk management frameworks (e.g., MCA, Inherent Risk), and audit processes
Exceptional leadership, communication, and interpersonal skills, with a demonstrated ability to influence and collaborate effectively with C-level executives and diverse global stakeholders
Strong analytical and strategic thinking capabilities, with the ability to translate complex business problems into actionable automation strategies

Job Responsibility

Define, champion, and execute the strategic vision and roadmap for the offshore Control Automation engagement, ensuring alignment with Citi's global automation and risk management objectives
Responsible for end-to-end delivery of control automation projects, overseeing the entire Control Automation life cycle from requirement management to implementation with focus on quality and speed to market
Drive insourcing of work from vendors and contribute to cost optimization and knowledge retention
Oversee the entire portfolio of offshore control automation programs and projects, ensuring successful delivery, adherence to financial targets, and maximization of value across diverse business functions
Cultivate and maintain robust relationships with senior executives across business, risk, audit, and technology functions, acting as the primary point of contact for the offshore engagement
Drive seamless collaboration and integration between offshore teams and global stakeholders, ensuring effective knowledge transfer, shared best practices, and consistent application of automation standards
Lead, mentor, and develop a large, multi-disciplinary team of control automation professionals, fostering a culture of innovation, continuous improvement, high performance, and talent retention within the offshore center
Spearhead the evaluation, adoption, and scaling of emerging technologies (e.g., advanced AI/ML, process mining, new automation platforms) to continuously enhance control automation capabilities and drive efficiency
Establish and enforce robust operational governance frameworks, ensuring optimal process efficiency, adherence to quality standards, compliance with regulatory requirements, and effective risk management for all offshore automation activities
Provide executive oversight on the architectural design and scalability of automation solutions, ensuring they are robust, reusable, and capable of addressing complex enterprise-wide control challenges

What we offer

Top benefits offered to global workforce, designed to support well-being, growth and work-life balance

Fulltime

Instrumentation Engineer – Process Automation and Electrical Engineering

Instrumentation engineer is responsible for activities related to its discipline...

Location

Italy , Milan

Salary:

Not provided

EUROTECNICA Contractors and Engineers S.p.A.

Expiration Date

Until further notice

Requirements

Bachelor’s Degree in Automation/Electrical engineering or Bachelor’s Degree in Chemical engineering
Minimum +2/3 years of work experience in engineering design in Oil & Gas or Power sectors is preferred
Proactivity, sense of initiative, ability to work independently and in a team
Fluent in Italian and English (written and spoken)
Availability to short and long term national and international business trips

Job Responsibility

Develop the discipline deliverables such as: Technical specifications / data sheets for field and control room instrumentation
Sizing and calculation of flow elements, control, and safety valves
Process hook-up sketches and relevant bill of materials
Interconnecting and wiring diagrams
Instrumentation cabling, wiring, junction boxes, power supply and distribution, UPS, and associated TCP/IP, SCADA, Modbus networking (switches, routers, Ethernet, fiber optics, etc.)
Cause & effect matrices
Interlock and control logic diagrams
Interlock and control narratives
Distributed Control Systems (DCS)
Safety Instrumented Systems (SIS)

Fulltime

Senior Controls Design Engineer- Hardware

As a Controls Design Engineer you will be the driving force behind bringing ATS’...

Location

United States , Lewis Center

Salary:

Not provided

ATS Automation Tooling Systems Inc.

Expiration Date

Until further notice

Requirements

Post-secondary degree or diploma in mechanical, electrical, systems, or computer engineering
6+ years of experience in electrical controls systems design, development with experience in robotics, machine building and automation system environments
Strong electrical problem solving skills
Thorough understanding and hands-on experience with PLCs, robotics control systems and machine operation
Effective communication skills both verbally and in writing with the ability to work either independently and part of a team in fast-paced environments

Job Responsibility

Design and develop electrical and pneumatic schematics specific to customer and project requirements based on standard ATS design approach
Create complete electrical schematics including power distribution
motor control
safety
PLC, PC and/or robot I/O
analog I/O
fuse and wire sizing
and detail panel layouts
Work directly with customers for concept development and advise customer on solving technical problems
Debug and commission electrical / pneumatic systems at our facility and on-site at customer locations

What we offer

Flexible work schedules
Employee events
Free coffee beverages
Employee referral program
Safety shoe programs
Competitive starting salaries
Overtime pay eligibility
Paid vacation
Company paid short- and long-term disability and life insurance
Comprehensive health benefits

Fulltime

Automation Engineer

Responsible for designing, implementing, and optimizing automated systems and pr...

Location

Puerto Rico , Aguadilla

Salary:

Not provided

Hewlett Packard Enterprise

Expiration Date

Until further notice

Requirements

Bachelor's or Master's degree in Mechanical or Electrical Engineering
Typically 4-6 years experience
Understanding of automation components such as sensors, actuators, and control systems
Experience in manufacturing or automation projects
Exposure to robotics, PLCs, or industrial automation platforms
Using ProEngineer or other 3D CAD software as a mechanical design tool
Strong analytical and problem solving skills
Strong understanding and experience in electronics packaging
Designing sheet metal and plastic parts and associated production tooling and processes
Using CFD and thermal mockups to validate thermal solution

Job Responsibility

Designing, implementing, and optimizing automated systems and processes within manufacturing operations
Supporting the design and implementation of automated systems and components
Contributing to troubleshooting and optimization of automation systems
Designing engineering solutions for mechanical and thermal hardware, electronics enclosures, and production tooling
Developing and implementing parameters and test plans for new and existing designs
Collaborating and communicating with management, internal, and outsourced development partners regarding design status, project progress, and issue resolution
Leading a project team of other mechanical hardware engineers and internal and outsourced development partners
Providing guidance and mentoring to less-experienced staff members

What we offer

Health & Wellbeing benefits
Personal & Professional Development programs
Unconditional Inclusion environment

Fulltime

Select Country

Project Engineer – Automation and Control

Job Responsibility

Requirements

Nice to have

What we offer

Looking for more opportunities?