CrawlJobs Logo

Production Technician I - Kiefel

https://www.baxter.com/ Logo

Baxter

Location Icon

Location:
United States , Marion

Category Icon
Category:
Manufacturing

Job Type Icon

Contract Type:
Not provided

Salary Icon

Salary:

44000.00 USD / Year
Save Job
Save Icon
Apply Position

Job Description:

This is a Salaried Non-Exempt position which contributes to our mission of saving and sustaining lives by supplying, operating and maintaining a Kiefel Machine in addition to inspecting and performing quality checks on the finished bags. Working in a cleanroom is essential to delivering life-saving therapies.

Job Responsibility:

  • Operate, monitor, and adjust as necessary a Kiefel machine using controls on an electrical control panel (HMI) or by making manual adjustments
  • Load and replenish production supplies (i.e. injection sites, tubing, PVC/Non-PVC roll stock and adhesive) at a rate consistent with production needs
  • Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
  • Inspect finished product and ensure that the quality standards have been met
  • Load and secure finished product in mobile closets
  • Execute a machine changeover when assigned (material changeovers only)
  • Document required information on manufacturing logs and/or POMS system
  • Identify, correct or escalate any inefficiency in the machine’s performance
  • Test, inspect and package Inter-Plant Shipping Orders (IPSO)
  • Notify the supervisor and take appropriate action if any safety, quality, or mechanical issues occur
  • Learn, understand and apply rigorous quality standards, Standard Operating Procedures (SOPs) and Current Good Manufacturing Practices (cGMP)
  • Sustain a clean and safe work area using 6S principles including maintaining and securing provided tools

Requirements:

  • High School Diploma, GED or equivalent
  • At least 1-2 years Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc.
  • Must have basic English written and oral communication skills adequate to communicate with other team members
  • Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
  • Must be able to perform basic mathematics
  • Proficient in how to use a calculator and measurement tools (calipers, snap gauges, rulers), as well as basic hand tools
  • The ability to push/pull and lift/carry up to 50 pounds and stand/walk continuously throughout the shift
  • Normal visual acuity required
  • Ability to squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck, twist and bend at the waist and balance
What we offer:
  • Shift flexibility to trade shifts and leverage overtime opportunities
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement

Additional Information:

Job Posted:
March 22, 2026

Employment Type:
Fulltime
Work Type:
On-site work
Icon
Baxter - All Job Offers
Job Link Share:
Copy Link Icon
Facebook Icon Twitter Icon LinkedIn Icon

Looking for more opportunities? Search for other job offers that match your skills and interests.

Briefcase Icon

Similar Jobs for Production Technician I - Kiefel

New

Production Technician I - Kiefel

This is where my hands make life-sustaining products. You are driven by the know...
Location
Location
United States , Marion
Salary
Salary:
44000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma, GED or equivalent
  • At least 1-2 years Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc.
  • Must have basic English written and oral communication skills adequate to communicate with other team members.
  • Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings.
  • Must be able to perform basic mathematics
  • Proficient in how to use a calculator and measurement tools (calipers, snap gauges, rulers), as well as basic hand tools.
  • The ability to push/pull and lift/carry up to 50 pounds and stand/walk continuously throughout the shift.
  • Normal visual acuity required.
  • Ability to squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck, twist and bend at the waist and balance.
Job Responsibility
Job Responsibility
  • Operate, monitor, and adjust as necessary a Kiefel machine using controls on an electrical control panel (HMI) or by making manual adjustments
  • Load and replenish production supplies (i.e. injection sites, tubing, PVC/Non-PVC roll stock and adhesive) at a rate consistent with production needs
  • Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
  • Inspect finished product and ensure that the quality standards have been met
  • Load and secure finished product in mobile closets
  • Execute a machine changeover when assigned (material changeovers only).
  • Document required information on manufacturing logs and/or POMS system
  • Identify, correct or escalate any inefficiency in the machine’s performance
  • Test, inspect and package Inter-Plant Shipping Orders (IPSO)
  • Notify the supervisor and take appropriate action if any safety, quality, or mechanical issues occur
What we offer
What we offer
  • Shift flexibility to trade shifts and leverage overtime opportunities
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Flexible Spending Accounts
  • educational assistance programs
  • family and medical leaves of absence
  • Fulltime
Read More
Arrow Right
New

Production Technician I - Kiefel

This is where my hands make life-sustaining products. You are driven by the know...
Location
Location
United States , Marion
Salary
Salary:
44000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma, GED or equivalent
  • At least 1-2 years Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc.
  • Must have basic English written and oral communication skills adequate to communicate with other team members.
  • Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings.
  • Must be able to perform basic mathematics
  • Proficient in how to use a calculator and measurement tools (calipers, snap gauges, rulers), as well as basic hand tools.
  • The ability to push/pull and lift/carry up to 50 pounds and stand/walk continuously throughout the shift.
  • Normal visual acuity required.
  • Ability to squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck, twist and bend at the waist and balance.
Job Responsibility
Job Responsibility
  • Operate, monitor, and adjust as necessary a Kiefel machine using controls on an electrical control panel (HMI) or by making manual adjustments
  • Load and replenish production supplies (i.e. injection sites, tubing, PVC/Non-PVC roll stock and adhesive) at a rate consistent with production needs
  • Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
  • Inspect finished product and ensure that the quality standards have been met
  • Load and secure finished product in mobile closets
  • Execute a machine changeover when assigned (material changeovers only).
  • Document required information on manufacturing logs and/or POMS system
  • Identify, correct or escalate any inefficiency in the machine’s performance
  • Test, inspect and package Inter-Plant Shipping Orders (IPSO)
  • Notify the supervisor and take appropriate action if any safety, quality, or mechanical issues occur
What we offer
What we offer
  • Shift flexibility to trade shifts and leverage overtime opportunities
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Fulltime
Read More
Arrow Right
New

Production Technician I - Kiefel

This is where my hands make life-sustaining products. You are driven by the know...
Location
Location
United States , Marion
Salary
Salary:
44000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma, GED or equivalent
  • At least 1-2 years Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc.
  • Must have basic English written and oral communication skills adequate to communicate with other team members
  • Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
  • Must be able to perform basic mathematics
  • Proficient in how to use a calculator and measurement tools (calipers, snap gauges, rulers), as well as basic hand tools
  • The ability to push/pull and lift/carry up to 50 pounds and stand/walk continuously throughout the shift
  • Normal visual acuity required
  • Ability to squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck, twist and bend at the waist and balance
Job Responsibility
Job Responsibility
  • Operate, monitor, and adjust as necessary a Kiefel machine using controls on an electrical control panel (HMI) or by making manual adjustments
  • Load and replenish production supplies (i.e. injection sites, tubing, PVC/Non-PVC roll stock and adhesive) at a rate consistent with production needs
  • Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
  • Inspect finished product and ensure that the quality standards have been met
  • Load and secure finished product in mobile closets
  • Execute a machine changeover when assigned (material changeovers only)
  • Document required information on manufacturing logs and/or POMS system
  • Identify, correct or escalate any inefficiency in the machine’s performance
  • Test, inspect and package Inter-Plant Shipping Orders (IPSO)
  • Notify the supervisor and take appropriate action if any safety, quality, or mechanical issues occur
What we offer
What we offer
  • Shift flexibility to trade shifts and leverage overtime opportunities
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Fulltime
Read More
Arrow Right
New

Production Technician I- Kiefel

This is a Salaried Non-Exempt position which contributes to our mission of savin...
Location
Location
United States , Marion
Salary
Salary:
44000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma, GED or equivalent
  • At least 1-2 years Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc.
  • Must have basic English written and oral communication skills adequate to communicate with other team members
  • Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
  • Must be able to perform basic mathematics
  • Proficient in how to use a calculator and measurement tools (calipers, snap gauges, rulers), as well as basic hand tools
  • The ability to push/pull and lift/carry up to 50 pounds and stand/walk continuously throughout the shift
  • Normal visual acuity required
  • Ability to squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck, twist and bend at the waist and balance
Job Responsibility
Job Responsibility
  • Operate, monitor, and adjust as necessary a Kiefel machine using controls on an electrical control panel (HMI) or by making manual adjustments
  • Load and replenish production supplies (i.e. injection sites, tubing, PVC/Non-PVC roll stock and adhesive) at a rate consistent with production needs
  • Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
  • Inspect finished product and ensure that the quality standards have been met
  • Load and secure finished product in mobile closets
  • Execute a machine changeover when assigned (material changeovers only)
  • Document required information on manufacturing logs and/or POMS system
  • Identify, correct or escalate any inefficiency in the machine’s performance
  • Test, inspect and package Inter-Plant Shipping Orders (IPSO)
  • Notify the supervisor and take appropriate action if any safety, quality, or mechanical issues occur
What we offer
What we offer
  • Shift flexibility to trade shifts and leverage overtime opportunities
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Fulltime
Read More
Arrow Right
New

Production Technician I - Kiefel

This is where my hands make life-sustaining products. You are driven by the know...
Location
Location
United States , Marion
Salary
Salary:
44000.00 USD / Year
https://www.baxter.com/ Logo
Baxter
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • High School Diploma, GED or equivalent
  • At least 1-2 years Production Technician or manufacturing experience with duties including preventative maintenance, machine troubleshooting, etc.
  • Must have basic English written and oral communication skills adequate to communicate with other team members
  • Understand verbal and written safety and quality instructions and read and comprehend written work instructions including words and drawings
  • Must be able to perform basic mathematics
  • Proficient in how to use a calculator and measurement tools (calipers, snap gauges, rulers), as well as basic hand tools
  • The ability to push/pull and lift/carry up to 50 pounds and stand/walk continuously throughout the shift
  • Normal visual acuity required
  • Ability to squat, climb, reach above shoulder level, reach at or below shoulder level, twist and bend at the neck, twist and bend at the waist and balance
Job Responsibility
Job Responsibility
  • Operate, monitor, and adjust as necessary a Kiefel machine using controls on an electrical control panel (HMI) or by making manual adjustments
  • Load and replenish production supplies (i.e. injection sites, tubing, PVC/Non-PVC roll stock and adhesive) at a rate consistent with production needs
  • Perform scheduled quality checks, disposition product, identify any deviations that may occur and take the appropriate action to include stopping production on the machine if necessary
  • Inspect finished product and ensure that the quality standards have been met
  • Load and secure finished product in mobile closets
  • Execute a machine changeover when assigned (material changeovers only)
  • Document required information on manufacturing logs and/or POMS system
  • Identify, correct or escalate any inefficiency in the machine’s performance
  • Test, inspect and package Inter-Plant Shipping Orders (IPSO)
  • Notify the supervisor and take appropriate action if any safety, quality, or mechanical issues occur
What we offer
What we offer
  • Shift flexibility to trade shifts and leverage overtime opportunities
  • Medical, Dental and Vision coverage
  • 160 hours of Paid Time Off and Paid Holidays
  • 401K match
  • Employee Stock Purchase Program
  • Paid Parental Leave
  • Tuition Reimbursement
  • Fulltime
Read More
Arrow Right
New

Structures & Payloads Design Engineer

At Boeing, we innovate and collaborate to make the world a better place. We’re c...
Location
Location
United States , Tukwila
Salary
Salary:
90950.00 - 182850.00 USD / Year
boeing.com Logo
Boeing
Expiration Date
March 30, 2026
Flip Icon
Requirements
Requirements
  • Bachelor of Science degree in Engineering (with a focus on Mechanical, Civil, Aerospace Aeronautical or Material Sciences)
  • 2+ years of related work experience
  • Experience in structural design process from conceptual layout phase through build to package release
  • Ability to obtain a US Security Clearance
  • US Citizenship required
Job Responsibility
Job Responsibility
  • Develop, integrate, and document structural and interior payload system requirements to establish system design
  • Create, maintain, and modify structural and interior payload system and component designs using 3-D CAD tools and other design methods
  • Perform and integrate analytical and test results to validate and verify systems and components meet requirements and specifications
  • Manage supplier development, test, and production activities
  • coordinate with suppliers to optimize design and achieve program goals
  • Develop new design and analysis processes and tools to improve effectiveness, quality, and efficiency of development efforts
  • Coordinate with other engineering groups to establish the product’s environment and ensure integration
  • Support FAA certification processes, including Supplemental Type Certificate (STC) development and approval
  • Apply knowledge of regulatory requirements and industry standards to ensure compliance
  • Utilize Model Based Engineering principles and project management tools and methodologies
What we offer
What we offer
  • Competitive base pay and variable compensation opportunities
  • Health insurance
  • Flexible spending accounts
  • Health savings accounts
  • Retirement savings plans
  • Life and disability insurance programs
  • Paid and unpaid time away from work
  • Generous company match to your 401(k)
  • Industry-leading tuition assistance program
  • Fertility, adoption, and surrogacy benefits
  • Fulltime
Read More
Arrow Right
New

Parts Advisor

Are you looking for a new challenge within the motor industry? At Vertu Land Rov...
Location
Location
United Kingdom , Nelson
Salary
Salary:
28730.00 GBP / Year
jobs.360resourcing.co.uk Logo
360 Resourcing Solutions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Parts Experience from a similar role within the Motor industry
  • Confident telephone manner
  • Strong attention to detail and a proactive approach
  • Comfortable working to targets and sales objectives
  • Willingness to engage in regular training and professional development
Job Responsibility
Job Responsibility
  • Handling inbound parts enquiries and orders via phone and online platforms
  • Accurately identifying and sourcing parts to meet customer needs
  • Using promotions effectively to meet sales targets
  • Identifying opportunities to upsell and increase sales
  • Staying up to date on new products, parts updates, recalls, and special offers
  • Building strong, positive relationships with customers and internal teams
What we offer
What we offer
  • 25 days holiday (rising with service) + bank holidays
  • Access to an online rewards platform – cashback and discounts at top retailers
  • Preferential service rates
  • Colleague car purchase scheme
  • Share incentive plan and pension
  • Enhanced maternity, paternity, and adoption benefits
  • Continuous learning and development opportunities
  • Fulltime
Read More
Arrow Right
New

Landing Gear and Hydraulic Systems Design and Analysis Engineer

At Boeing, we innovate and collaborate to make the world a better place. We’re c...
Location
Location
United States , Oklahoma City
Salary
Salary:
96060.00 - 159850.00 USD / Year
boeing.com Logo
Boeing
Expiration Date
April 03, 2026
Flip Icon
Requirements
Requirements
  • Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement
  • 3+ years of experience with mechanical systems
  • 3+ years of experience with hydraulic and/or mechanical control systems
  • 3+ years of experience with basic aerodynamics/fluid mechanics principles
  • 1+ years of experience working conceptual, preliminary and detailed design including 2D drawings and 3D deliverables
  • Active U.S. Secret Clearance or higher
  • Experience reading and interpreting engineering schematics, and specifications
  • Experience performing hydraulic / fluid system analysis, preferably using MATLAB and/or Easy5 software
  • 3+ years of experience designing tooling using CAD/CAM software, preferably CATIA
  • Experience producing technical reports and presentations
Job Responsibility
Job Responsibility
  • Supports the development and documentation of mechanical and fluid system and thermal environment requirements to establish the system design
  • Supports the development, maintenance, or modification of system, component, and installation designs/proposals to provide design documentation to downstream groups
  • Performs and documents analyses to validate and verify systems and components meet requirements and specifications
  • Contributes to supplier development, test, and production activities and directs the supplier to optimize integration and achieve program goals
  • Supports system components' designs/proposals standards to provide installation and detail documentation
  • Trains others
  • Works under general direction
  • Lead and provide technical quality review of the development and documentation of mechanical and fluid systems to establish the system design
  • Lead activities to validate and verify mechanical and fluid systems requirements
  • Lead the development, maintenance, or modification of system components' designs/proposals to provide installation and detail documentation
What we offer
What we offer
  • Relocation based on candidate eligibility
  • Competitive base pay and variable compensation opportunities
  • Health insurance
  • Flexible spending accounts
  • Health savings accounts
  • Retirement savings plans
  • Life and disability insurance programs
  • Programs that provide for both paid and unpaid time away from work
  • Generous company match to your 401(k)
  • Industry-leading tuition assistance program pays your institution directly
  • Fulltime
Read More
Arrow Right
Jobs by Category
Art and Entertainment Jobs Banking Jobs Call Center Jobs Construction Jobs Consulting Jobs Customer Service Jobs Education Jobs Energy Jobs Finance Jobs Gastronomy Jobs Health and Beauty Jobs Hospitality and Tourism Jobs Human Resources Jobs Insurance Jobs IT - Administration Jobs IT - Software Development Jobs Legal Jobs Logistics Jobs Manufacturing Jobs Marketing, Digital Marketing, SEO, SEM Jobs Media Jobs Nursing Jobs Office Administration Jobs Pharmacy Jobs Physical Work Jobs Public Relations Jobs Public Sector Jobs Purchasing Jobs Quality Control Jobs Real Estate Jobs Research and Development Jobs Sales Jobs
Job Positions Jobs by Country
United States Jobs United Kingdom Jobs India Jobs Canada Jobs Australia Jobs Germany Jobs Ireland Jobs Poland Jobs
Company
Blog About Us Contact
Follow Us
Facebook
X (Twitter)
LinkedIn
Instagram
CrawlJobs Group
ITFlashcards AllDevBlogs
© 2026 CrawlJobs Ltd. All Rights Reserved
Terms & Conditions Privacy Policy