Product Test Technician III Job at ICON (Austin)

Technician III, Test

This position is responsible for working with test engineers to test fiber optic...

Location

Mexico , Juarez

Salary:

Not provided

CommScope

Expiration Date

Until further notice

Requirements

Associate’s degree in related curriculum such as mechanical engineering technician, electronic systems technician, metrology technician, etc.
Solid communication skills including excellent writing skills and fluency in English – 70%
Strong computer skills with Microsoft Office
Skilled at planning and ability to pay attention to details
Ability to effectively work within a team environment
May be required to do physical lifting up to 40 pounds

Job Responsibility

Working with test engineers to test fiber optic products

Electrical Technician III

We are seeking a skilled and motivated EE Technician to join a hardware team foc...

Location

United States , Redmond

Salary:

29.00 - 39.00 USD / Hour

Apex Systems

Expiration Date

Until further notice

Requirements

AS/AA or BS degree in Electrical Engineering, Electronics Technology, or equivalent practical experience
3+ years of experience with electronic assembly and soldering, including (01005) and 0.35mm-pitch BGA components
Ability to operate standard lab test and measurement equipment such as oscilloscopes, DMMs, power supplies, signal generators, and LCR meters
Proficiency in reading and interpreting electrical datasheets, schematics, PCB layout drawings, and mechanical assembly drawings

Job Responsibility

Build, assemble, rework, and modify prototype PCBs and electronic assemblies, including fine-pitch SMD (01005) and 0.35mm-pitch BGA components
Test and repair units by running functional tests, performing visual inspections, and executing component or module exchanges to isolate failures
Document all work performed on each unit in a thorough and consistent manner
Create and maintain test fixtures, wiring harnesses, and cable assemblies for prototype evaluation
Maintain lab equipment, manage component inventory, and ensure lab safety standards are upheld
Adapt to a changing statement of work, prioritizing and balancing multiple tasks
Collaborate with design engineers for troubleshooting, clarification, and feedback
Propose and implement process improvements to increase production efficiency

What we offer

Medical
dental
vision
life
disability
other insurance plans
ESPP (employee stock purchase program)
401K program with company match after 12 months
HSA (Health Savings Account on the HDHP plan)
SupportLinc Employee Assistance Program (EAP) with up to 8 free counseling sessions

Electro-Mechanical Technician III

Location

United States , Charleroi

Salary:

27.00 - 29.00 USD / Hour

Morson Talent

Expiration Date

Until further notice

Requirements

Associate’s degree or equivalent from two-year college or technical school for Drafting, 3D Modeling, or Mechanical Design
1 year experience in mechanical CAD software (AutoCAD, SolidWorks, Pro-E)

Job Responsibility

Mechanical Drafting using current generation AutoCAD software
Generate, modify, and organize general arrangement and physical outline drawings accurately and on time for customer approval and manufacture of Circuit Breaker products
CAD file conversions as needed
Utilize ProEngineer to generate 3D models for customer circuit breakers upon request
Review mechanical and electrical drawing packages for technical and typographical errors
Prepare approval / as-built drawing packages, CT curves, and test reports for customer submittal
Manage and maintain all circuit breaker engineering drawing files within document management system (EDMATS)
Prepare device tag files for procurement by planning team
Update order tracking record database with accurate data
Performs other duties as necessary or assigned

Fulltime

SMT Technician III

The SMT Technician III is responsible for monitoring, evaluating, reporting, and...

Location

United States , Tampa

Salary:

Not provided

Sypris Electronics

Expiration Date

Until further notice

Requirements

Associates degree or vocational certificate in a technical program or the equivalent combination of education and experience
Minimum five years of experience
IPC-A-610 and J-STD-001 certifications, or ability to obtain within 60 days
Knowledge of the use of mechanical hand tools and soldering equipment
Ability to interpret layouts
Understanding of material and component types, styles, symbols and color codes
Highly skilled in problem solving techniques and methods (process, product, procedure)
experience with continuous improvement, Lean manufacturing preferred
Working knowledge of electronics, pneumatics, hydraulics and mechanical operations/systems
May require handling or exposure to chemicals used in the production area

Job Responsibility

Monitor, evaluate, report, and improve the performance of all manufacturing equipment and machines
Perform evaluation, preventative and corrective maintenance, including immediate repairs on a variety of equipment utilized in the production process
Work with management, Manufacturing, Quality, and Test engineers on multiple product lines supporting both commercial and government products
Maintains equipment, to include: cleaning, lubrication, minor repairs and adjustments, programming and determining appropriate action for mechanical, electrical pneumatic and hydraulic equipment failures
Operates and troubleshoots SMT equipment (MyData and ASM) which includes the printer, adhesive station, chip shooter, pick & place, reflow oven, X-Ray, wash, AOI unit, paste height and measurement, etc.
Conducts minimal programming for SMT equipment utilized in the production process
Assists the Manufacturing Engineering Technician III in establishing the preventative maintenance priority on manufacturing equipment
Maintains departmental records on equipment maintenance, repairs, training, and calibration
Assists with maintaining the machine parts and tooling inventory
Assists with preparing manufacturing work instructions related to product changes or new products, processes or methods specifying sequence of operations and standard work for manufacturing processes

What we offer

health
dental
vision
life
disability
401(k) with company matching
9/80 work schedule

Fulltime

Manufacturing Technician III

We have a current opportunity for Contractor - Manufacturing Technician III for ...

Location

United States , Goleta

Salary:

32.00 - 35.00 USD / Hour

Redwire Space

Expiration Date

Until further notice

Requirements

High School Diploma, GED, or equivalent plus advanced training
At least 5 plus years prior experience working in an Aerospace manufacturing setting in a similar position
Strong mechanical aptitude, good fabrications skills and general shop experience
Intermediate computer skills including Microsoft Office 365
Must be able to work Mon-Fri, occasional weekends to meet shipping dates and some late days
Ability to stand
walk
and use hands to finger, handle, or feel objects, tools, or controls
Ability to reach with hands and arms
Ability to lift and/or move up to 50 pounds

Job Responsibility

Fabrication and validation of critical flight hardware, including mechanical assembly, electrical assembly, and flight Ground Support Equipment
per associated flight drawings, procedures, quality standards and internal training
Assist engineers in flight / prototype hardware manufacture / test infrastructure development, documentation of assembly, test procedures and other specified tasks
Identify and communicate non-conformances to engineering and quality assurance
Work with facilities and maintenance to ensure that production equipment is maintained and repaired in a timely manner
Work with manufacturing engineering to optimize manufacturing orders and ensure process instructions are understood.

What we offer

Highly competitive benefits package

Fulltime

General Maintenance Technician III - Roofer

Amentum is seeking a General Maintenance Technician III – Roofer to join our ope...

Location

United States , Chandler

Salary:

25.00 - 27.00 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

High school diploma or demonstrated equivalent
Three years of maintenance experience in one of the following trades or demonstrated equivalent combination of education and experience: Industrial HVAC/ Industrial Mechanical Machine Repair, or Automotive Repair
Ability to work in an aerial lift or scissor lift at heights up to 30 feet or higher
Ability to handle extreme weather conditions
Wear steel toe safety shoes, safety glasses, gloves, hard hats, and other Personal Protective Equipment as needed
Must be willing to work overtime when required
May be required to work holidays and weekends

Job Responsibility

Placement, removal and repair of various roofing materials such as asphalt, wood and plastics
Use a variety of hand and power tools
Roofers must be able to work long hours of physical labor, should work well with their hands and should have the ability to bend and climb
Reading blueprints and diagrams is necessary to ensure that you can follow instructions on the job
Lay new roofing materials such as asphalt, wood, steel and plastics
Inspect roofing for damage and perform any needed repairs
Spray treatment chemicals on roofs and buildings to seal them from water and weather
Clean rooftops by removing leaves, ice and other debris
Install insulation materials underneath roofs
Safely performs functions of the position including following proper safety guidelines such as job hazard analysis and lockout/tagout procedures and wearing PPE as required

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Facility Maintenance Plumbing Technician III

Amentum is seeking a Facility Maintenance/Plumbing systems technician for our cl...

Location

United States , Groton

Salary:

38.00 - 43.00 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

3 years’ experience in the field of mechanical maintenance and plumbing
Must have hands-on experience in the maintenance, repair, and operation of mechanical building systems
Ability to pass a medical evaluation for respirator use and be able to successfully complete a fit test for several types of respirators
Ability to read and understand information contained in a variety of documents or displayed on a computer screen
Demonstrated fluency in computer use including the full Microsoft product line
Ability to obtain an appropriate driver's license issued by the State Department of Motor Vehicles, as requested
Must be able to obtain and maintain facility credentials/authorization
US Citizenship or Permanent Residency is required for facility credentials/authorization at this work location
This position does not include sponsorship for United States work authorization
Regularly lift to 50 lbs

Job Responsibility

Providing advanced level of expertise in responding to work orders, troubleshooting, and providing preventative and predictive maintenance to general facilities systems equipment to include but not limited to plumbing, mechanical equipment, pumps, piping, backflows, drains, and other equipment as directed
Repairing maintenance and mechanical building systems including but not limited to Chilled water, Reheat, Potable and Non-potable, Hot water distribution and specific components, Distilled water & reverse Osmosis systems, lab Gas systems, High & Low Vacuum systems, Instrument air Compressors and dryers, waste discharge systems consisting of effluent, Lab Waste, storm and sewage
Complying with Good Manufacturing Practices (GMP)
Perform periodic maintenance on backflow preventers, eyewash/safety showers, and water filtration systems
General understanding of lock out tag out procedures and application
Respond to work orders associated with building equipment
Inspects major equipment and/or operating systems and takes corrective actions as necessary
Operate hand tools including grinders, saws, impact wrenches, standard wrenches, drills, and similar instruments
Ensures all appropriate mechanical operations, standards, controls, and specifications, are maintained at a high level of quality
Assembles, installs, and repairs pipes, fittings and fixtures of heating, water, and drainage systems according to specifications and plumbing codes

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Facility Maintenance Plumbing Technician III

Amentum is seeking a Facility Maintenance/Plumbing systems technician for our cl...

Location

United States , Groton

Salary:

38.00 - 43.00 USD / Hour

Amentum

Expiration Date

Until further notice

Requirements

3 years experience in the field of mechanical maintenance and plumbing
Must have hands-on experience in the maintenance, repair, and operation of mechanical building systems
Ability to pass a medical evaluation for respirator use and be able to successfully complete a fit test for several types of respirators
Ability to read and understand information contained in a variety of documents or displayed on a computer screen. Demonstrated fluency in computer use including the full Microsoft product line
Ability to obtain an appropriate driver's license issued by the State Department of Motor Vehicles, as requested
Must be able to obtain and maintain facility credentials/authorization. Note: US Citizenship or Permanent Residency is required for facility credentials/authorization at this work location
This position does not include sponsorship for United States work authorization
Regularly lift to 50 lbs
Regularly climb ladders, steps, and scaffolding
Repetitive motions: bend, stoop, squat, kneel, stretch, reach, wrist movement

Job Responsibility

Providing advanced level of expertise in responding to work orders, troubleshooting, and providing preventative and predictive maintenance to general facilities systems equipment to include but not limited to plumbing, mechanical equipment, pumps, piping, backflows, drains, and other equipment as directed
Repairing maintenance and mechanical building systems including but not limited to Chilled water, Reheat, Potable and Non-potable, Hot water distribution and specific components, Distilled water & reverse Osmosis systems, lab Gas systems, High & Low Vacuum systems, Instrument air Compressors and dryers, waste discharge systems consisting of effluent, Lab Waste, storm and sewage
Complying with Good Manufacturing Practices (GMP)
Perform periodic maintenance on backflow preventers, eyewash/safety showers, and water filtration systems
General understanding of lock out tag out procedures and application
Respond to work orders associated with building equipment
Inspects major equipment and/or operating systems and takes corrective actions as necessary
Operate hand tools including grinders, saws, impact wrenches, standard wrenches, drills, and similar instruments
Ensures all appropriate mechanical operations, standards, controls, and specifications, are maintained at a high level of quality. Systems/Equipment to include pumps, fans, heat exchangers, and associated valves, etc
Assembles, installs, and repairs pipes, fittings and fixtures of heating, water, and drainage systems according to specifications and plumbing codes

What we offer

Health, dental, and vision insurance
Paid time off and holidays
Retirement benefits (including 401(k) matching)
Educational reimbursement
Parental leave
Employee stock purchase plan
Tax-saving options
Disability and life insurance
Pet insurance

Fulltime

Select Country

Product Test Technician III

Job Description

Job Responsibility

Requirements

Looking for more opportunities?