CrawlJobs Logo

Process Engineer

United States, Sinclair · Job Posted May 17, 2026
Apply Position
Job Link Share

Job Description

HF Sinclair in Sinclair, WY is seeking a Process Engineer who under close and frequent supervision, conducts engineering assignments for the Engineering Department

Job Responsibility

  • Performs engineering calculations (i.e. mass balances, energy balances, and conversion calculations)
  • Gathers, analyzes, interprets, acts upon, and disseminates pertinent data
  • Generates and maintains key performance indicators for assigned units
  • Assist in the design of chemical plant equipment and devise processes for manufacturing chemicals and products
  • Conduct research to develop new and improved chemical manufacturing processes
  • Assist design and plan layout for chemical processes on a commercial scale
  • Investigate most effective arrangement of operations (i.e. mixing, crushing, heat transfer distillation, oxidation, hydrogenation, and polymerization)
  • Implement processing methods and controls to meet quality standards in the most cost efficient manner
  • Investigate and recommend solutions to work-in-process problems
  • Recommend and assist with implementing improvements and/or modification in sequence of operations, equipment utilization, and related matters
  • Review and make recommendations pertaining to proposals of outside vendors regarding the purchase of new or modernization of existing processing equipment
  • Generate and/or modify P&IDs
  • Survey construction areas to plan equipment and piping layout
  • Produce and issue civil, structural and piping drawings for construction
  • Hire and supervise contractors throughout the construction phase, as needed
  • Perform sketches, technical comparisons and similar technical work as required by assignment
  • Special assignments or tasks assigned to the employee by their supervisor, as determined from time to time in their sole and complete discretion

Requirements

0 years of on-the-job experience is required. A minimum of a Bachelors Degree in Engineering (Mechanical or Chemical discipline as required by assignment) is required. Basic knowledge of commonly used engineering concepts and ability to apply this knowledge analytically. Basic ability to stay abreast of new technology developments and processes is essential. Advanced reading and writing skills. Strong verbal and written communication skills with ability to communicate effectively with others. Ability to perform advanced mathematical calculations

What we offer

  • Medical Insurance
  • Vision Insurance
  • Dental Insurance
  • Paid Time-Off
  • 401(k) Retirement Plan with match
  • Educational Reimbursement
  • Parental Bonding Time
  • Employee Discounts

Looking for more opportunities?

Search for other job offers that match your skills and interests.

Similar Jobs for

Process Engineer

8 matching positions

New

Process Engineer

Hunter Douglas is the world’s leading manufacturer of window coverings and a maj...
Location
Location
United States , Augusta
Salary
Salary:
90000.00 - 100000.00 USD / Year
hunterdouglas.com Logo
Hunter Douglas
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Engineering degree or equivalent
  • At least 5 yrs of experience process or manufacturing areas
  • At least 1 yrs of experience as a Leader in manufacturing industry
  • At least 1 year of experience in projects (desirable)
  • Bilingual in English 80%
  • Leadership skills
  • Analytical and problem-solving skills
  • Communication skills at all levels
  • Planning skills
  • Self-directed
Job Responsibility
Job Responsibility
  • Perform safety process walks on his/her processes and ensure effective countermeasures to the identified risks, to guarantee zero accidents due to process
  • Define the Direct Labor needed to run for each of his/her processes in the plant and to document it on a monthly basis
  • Lead the multidisciplinary teams in the actions to achieve Process Target Efficiencies in his/her processes
  • Develop and maintain the Standard Work for his/her processes that allow us to achieve our targeted efficiency (including packaging)
  • Define and maintain the cycle times for each operation of his/her processes, and document it on monthly basis
  • Support the perform of the LV1 and its proper documentation of the results (headcount, cycle times, rates, efficiencies, scrap %, rework %, etc)
  • Support the flawless implementation of process on time for new Launches (LV1 passed and no major issues in process)
  • Develop and maintain PFMEAs for each of our processes, and lead the multidisciplinary teams in the reviews of the PFMEAs in order to prevent cost of poor quality
  • Perform on weekly basis a Process/Gemba Walk to one of his/her process on the plant to guarantee the compliance with standard work and guidelines, identify opportunities and issues, document the findings and ensure effective countermeasures to correct current issues and to prevent potential ones (including packaging)
What we offer
What we offer
  • Annual base salary range: $90,000 - 100,000
  • Bonus Target Range: 10-15%
  • Generous benefits package including medical, dental, vision, life, disability
  • A company culture that prioritizes internal development and professional growth
  • Time off with pay
  • 401(k) plan with a degree of employer matching
  • Paid parental leave
  • Wellness programs and product discounts
  • Fulltime
Read More
Arrow Right

Process Engineer

Navarro Research and Engineering is recruiting an Project Engineer in Oak Ridge,...
Location
Location
United States , Oak Ridge
Salary
Salary:
Not provided
navarro-inc.com Logo
Navarro Inc
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BA/BS Degree from an ABET accredited school in a technical discipline, plus 10 years or more of direct experience required, or an MA or MS with 10 plus years of experience
  • A DOE Q Clearance or DOD equivalent is highly preferred in consideration for this position
  • Due to the nature of the government contract requirements and/or clearances requirements, US citizenship is required
Job Responsibility
Job Responsibility
  • Provide Project Engineering support and coordination for various projects across one but not limited to
  • Commercial, Infrastructure, Production Modernization, and/or Production Stockpile projects
  • Provide Project Engineering support necessary to complete planning, design and implementation of new machine tools and/or infrastructure upgrades
  • Provide technical integration, leadership, guidance, and direction to other multi-disciplined engineering teams as requested for high profile plant initiatives
  • Appropriately apply ASME Nuclear Quality Assurance (NQA-1) requirements for work in nuclear facilities
  • Plan and direct the engineering activities on projects
  • Establish detailed project design scope, budgets, and schedules
  • Professionally coordinate engineering efforts with Production, Maintenance, Project Management, Construction, Startup, and Project Controls personnel
  • Review project engineering progress against approved schedules and take corrective action when required
What we offer
What we offer
  • Health Care Plan (Medical, Dental & Vision)
  • Retirement Plan (401k, IRA)
  • Life Insurance (Basic, Voluntary & AD&D)
  • Paid Time Off (Vacation & Public Holidays)
  • Short Term & Long Term Disability
Read More
Arrow Right

Process Engineer

We are looking for an Industrial Engineer to join our Engineering team! In this ...
Location
Location
United Kingdom , Hook
Salary
Salary:
Not provided
jobs.360resourcing.co.uk Logo
360 Resourcing Solutions
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree or higher-level qualification in Manufacturing Engineering, Mechanical Engineering, or related discipline
  • Formal training or working knowledge of Lean Manufacturing principles
  • Knowledge of PFMEA, Control Plans, and process capability analysis (Cp/Cpk, Gage R&R)
  • Proven experience in an Electronics Manufacturing Services (EMS) or Contract Electronics Manufacturing (CEM) environment
  • Experience supporting New Product Introduction (NPI) and production ramp-up
  • Strong understanding of SMT, assembly, and box-build manufacturing processes
Job Responsibility
Job Responsibility
  • Support new product introduction (NPI) by designing scalable and cost-effective manufacturing processes
  • Identify automation opportunities and develop robust capital investment justifications through ROI and cost–benefit analysis
  • Lead the implementation, validation, and optimisation of new equipment and associated manufacturing processes
  • Design, create, and optimise production line layouts to improve material flow, ergonomics, space utilisation and line balancing
  • Develop new and maintain existing Process Failure Mode and Effects Analyses (PFMEAs) and support Control Plan development
  • Support Health & Safety (H&S) risk assessments to ensure processes are safe, compliant, and effective
  • Develop and maintain Local Work Instructions (LWIs), Standard Operating Procedures (SOPs), and related technical documentation for new and existing equipment
  • Collaborate with Production and NPI Engineers to generate and maintain Product Work Instructions (PWIs) and associated documentation for customer products
  • Provide technical support during production shifts, acting as an escalation point for process and equipment-related issues
  • Participate in external audits (e.g., NADCAP) and contribute to continuous improvement and compliance initiatives
What we offer
What we offer
  • 23 days holiday (plus Bank Holidays & Flex Days)
  • early finish on a Friday
  • Flexible working opportunities
  • Company Pension Scheme
  • Health Cash Back Scheme
  • range of discounts
  • excellent training and development opportunities
  • pay for professional memberships on a case-by-case basis
  • Fulltime
Read More
Arrow Right

Process Engineer

The position is technically and industrially rooted and offers a great deal of f...
Location
Location
Norway , Elnesvagen
Salary
Salary:
Not provided
omya.com Logo
OVYA Production
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Master's degree in mineral production, chemical process technology, or equivalent
  • Experience from process industry, pilot plants, or production environments is an advantage
  • Ability to drive projects forward while collaborating well with the organization
  • Proficient in Norwegian and English, both written and spoken.
Job Responsibility
Job Responsibility
  • Plan and carry out pilot and full-scale trials in collaboration with international professional environments
  • Responsibility at the start-up of new products and process lines
  • Identify and implement measures for better operations, resource utilization, and stability
  • Document results and translate them into industrial practice
  • Central role in further developing innovative concepts into robust production processes in full-scale operation
What we offer
What we offer
  • A technically demanding role close to industrial operations
  • A strong professional environment with high execution capability
  • Collaboration with international environments
  • Good local and corporate development and career opportunities
  • Competitive terms and secure frameworks
  • Fulltime
Read More
Arrow Right

Process Engineer

We are looking for a Process Engineer to join our North Rocks factory. Process E...
Location
Location
Australia , New South Wales
Salary
Salary:
Not provided
unilever.com Logo
Unilever
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Experience in FMCG manufacturing undertaking the duties of a Process or Reliability Engineering for minimum 2 years, working with and training/coaching line crews
  • Unilever Manufacturing System/World Class Manufacturing (UMS/WCM) or similar lean/TPM methodologies including RCA and FI
  • Business acumen and financial tools, understanding of the Master plan, factory priorities and how manufacturing performance of the site correlates with its finance KPIs and Business Groups (BGs) targets achievement
  • Engineering degreed preferably. Potentially this is a development role for a technician, technical operator or leading hand with a good understanding of R2S/Manex methodologies and strong leadership/coaching skills.
Job Responsibility
Job Responsibility
  • Eliminate Waste and Loss according to the UMS (Unilever Manufacturing System) prioritization process using BPCD (Business priority and cost deployment), FI, AM and PM pillar tools and methodologies. Lead prioritization of losses and recommend focus areas for the department
  • Directly responsible for AM and FI pillars in the department
  • Run to Standard (R2S) implementation: (Data collection and analysis, Prioritization of losses, Problem solving, SMED, AM activities definition and machine settings (Centerlines or Process parameters definition)
  • Train line crews on technical standards and restoration of basic conditions (Stability sustainability)
  • Upskilling the line crews in AM and FI tools to ensure we are equipped with the right ability
  • Adhere to and follow Good Manufacturing Practice (GMP) hygiene standards
  • Support Safety, Hygiene, GMP and Quality initiatives in the department
  • Drive 5S standards
What we offer
What we offer
  • amazing discounts on external company products
  • attractive employee referral reward program
  • Fulltime
Read More
Arrow Right

Process Engineer

We have an exciting opportunity for a Process Engineer with a well-established i...
Location
Location
United States , Marietta
Salary
Salary:
Not provided
selectek.com Logo
Selectek
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • BS Degree in chemical engineering
  • 3 Plus year as a Process Engineer for Industrial projects
  • AutoCAD Plant 3D proficiency
Job Responsibility
Job Responsibility
  • Use AutoCAD Plant 3D to create P&ID drawings
  • Prepare project related documentation such as Data Sheets, Functional Descriptions, and equipment sizing
  • Review sales documentation on new projects to confirm process calculation and equipment sizing selections
  • Create project P&IDs in Plant P&ID and keep them current
  • Work with project team on equipment and instrumentation selection
  • Attend project meetings
  • Assist in development of department standards, procedures and sizing worksheets
  • Assist in new product development and designs
  • Fulltime
Read More
Arrow Right
New

Process Engineer

Airswift is currently seeking a Process Engineer to support a major client in Qu...
Location
Location
United States , Quintana
Salary
Salary:
Not provided
airswift.com Logo
Airswift Sweden
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Bachelor's degree in engineering
  • Valid/Current TWIC Required
  • 10+ Years of Process Engineering Experience
  • 5+ Years of Gas Treatment or Gas Liquefaction Process Experience
  • 3+ years of experience in an operating industrial facility
Job Responsibility
Job Responsibility
  • Make recommendations for process systems design, operational practices, and controls
  • Analyze and act on key performance indicators (KPI) and highlight for any exceedance
  • Collect data, analyze and advise on any exceedance on Safe Integrity Limits (SOL)
  • Develop process simulations to investigate system steady-state responses in support of diagnostics and troubleshooting
  • Collaborate with operations personnel to troubleshoot process issues
  • Develop process monitoring tools and make improvement recommendations to enhance production and efficiency performance
  • Provide preliminary scopes of work, cost estimates, and schedules to support capital and facility upgrade projects
  • Manage technical Management of Change (MOC) process and utilize it in support of capital projects and routine facility changes
  • Support the development, review, and closeout of Management of Change (MOC) activities including things like work package, technical design, process safety information, training, pre-startup safety/return to original condition reviews
  • Participate in Process Hazards Analysis (PHA) and Hazard and Operability Reviews (HAZOP) or Layers of Protection Analysis (LOPA) to ensure safety in design
  • Fulltime
Read More
Arrow Right
New

Process Engineer

Unilever is the place where you can bring your purpose to life with the work tha...
Location
Location
United Arab Emirates , Dubai
Salary
Salary:
Not provided
unilever.com Logo
Unilever
Expiration Date
Until further notice
Flip Icon
Requirements
Requirements
  • Mechanical Or Electrical Engineering Graduate
  • Minimum 3 years factory role, continuous improvement/Process engineer experience in FMCG industry
  • Hands on Experience on managing Focused Improvement projects
  • Hands on experience of WCM/TPM/Manufacturing Excellence
  • Must demonstrate a strong technical knowledge from previous practice with evidence of elimination wastes and losses from production lines
  • Must possess strong engineering leadership credentials with a proven ability to manage highly automated Lines/Process
Job Responsibility
Job Responsibility
  • Working directly with the line crews and Technical Teams daily to identify the losses and countermeasure
  • The Process Engineer also acts as the technical trainer for line teams and provides coaching in phenomena identification, root cause analysis and the establishment of countermeasures
  • The Process Engineer is responsible for improvements and the establishment of revised basic conditions on the line
  • Eliminate losses and wastes using WCM/UMS/Continuous improvement methodologies and increase the stability of the line to support the transition of semi-autonomous teams to Autonomous Team
  • Implementation of Focused improvement pillar & Autonomous Pillar
  • Supporting Planned maintenance, Quality Pillar
What we offer
What we offer
  • Equity, inclusion and diversity commitment
  • Fulltime
Read More
Arrow Right